Physical Sciences and Mathematics Commons^™

Research On Flight Route Planning For Specific Multi-Missions, Lin Zhong, Ming'an Tong, Sheng Li

Journal of System Simulation

Abstract: In order to complete specific aviation missions, a flight route planning model for specific multi-missions is presented. The grid method is used to build a battlefield environment model. Accordingto the complex and real battlefield environment and operational requirements, five target route planning models including distance, fuel consumption, mission completion, ground-to-air threat, and air-to-air threat are proposed. On the basis of specific mission demands, several requirements for missions are analyzed, and the index of mission completion is presented. According to the problem's characteristics, the two-stage solution algorithm for route planning is proposed. In the first stage, the multi-mission sequence is …

Research On Artificial Population Generation And Application Based On Genetic Algorithm, Hongli Zhang, Jingshuang Deng

Journal of System Simulation

Abstract: High-precision micro-population data are one of the key basic data for simulation systems such as disease spread, traffic travel, and emergency events. In reality, computer-generated artificial populations are often used for simulation. Due to computational efficiency and standardization of generation steps, the iterative proportional fitting method is currently used for artificial population synthesis. However, it has strict requirements on basic data and faces zero-unit and data representational deviation problems, and it fails to guarantee the fitting at the individual and family levels at the same time. In order to overcome this deficiency, an improved genetic algorithm using a simulated …

Data Generation Model-Based Synthetic Sample Imputation Method, Yulin He, Jiaqi Chen, Hepeng Xu, Zhexue Huang, Jianfei Yin

Journal of System Simulation

Abstract: In order to solve the problem of inconsistent probability distribution between synthetic samples by imputation and real samples, a data generation model-based synthetic sample imputation (DGM-SSI) method is proposed. The data generation model of real samples is constructed based on the Gaussian mixture model, and the number of corresponding components of the Gaussian mixture model is determined by the multi-model fusion strategy. The synthetic samples required for model imputation are generated by using the data obtained from the real samples. Specifically, the components of the data generation model and their weights are used to control the generation of synthetic …

Research On Hierarchical Motion Planning Method For Uav Substation Inspection, Songming Jiao, Yunfeng Shou, Jianpeng Bai, Zhu Wang

Journal of System Simulation

Abstract: In order to improve the efficiency and quality of unmanned aerial vehicle (UAV) substation inspection, a hierarchical motion planning method for UAV inspection based on front-end path search and back-end trajectory generation is proposed. At the front end, an improved A* algorithm is proposed to increase the planning speed and reduce the path turnings by constraining the direction of node expansion and modifying the heuristic function. At the back end, a minimum-snap trajectory optimization combined with the waypoint filtering method is proposed to generate a smooth trajectory that is beneficial for UAV inspection and tracking. The simulation results show …

Research On Intelligent Statistical Analysis Of Wargaming Data Based On Nl2sql, Laixiang Yin, Zhiqiang Li, Qiongying Fu

Journal of System Simulation

Abstract: In the face of massive wargaming data, the traditional interface query method can no longer meet the commander's requirements, i. e., fast, comprehensive, and accurate data querying. Through indepth analysis of the characteristics of wargaming data and the defects of the mainstream natural language to struct query language (NL2SQL) model, a set of solutions for the intelligent statistical query of wargaming data is presented. Due to the lack of datasets, a wargaming dataset construction scheme based on human-machine assistance and dynamic iteration is provided. In order to solve the timesensitive problem of wargaming querying, time expression recognition and standardization …

Construction And Application Of Digital Twin System For Optical Fiber Secondary Coating Workshop, Biao Yuan, Yourui Huang, Shanyong Xu, Xue Rong

Journal of System Simulation

Abstract: In order to solve the problem that the current optical fiber secondary coating workshop has inferior intelligence and low digital degree, a three-dimensional (3D) visual monitoring and fault diagnosis method for the optical fiber secondary coating workshop based on digital twin (DT) is proposed. In view of the equipment in the optical fiber secondary coating workshop, combined with the workshop production process and equipment operation mechanism, the digital modeling of all physical properties of the optical fiber secondary coating workshop is carried out, and the virtual twin scene is constructed. Real-time mapping between the virtual workshop and the physical …

3d Garment Collision Simulation Based On Human Skeletal Features, Yuanyuan Chen, Yongjian Huai, Xiaoying Nie, Ke Lang

Journal of System Simulation

Abstract: In order to enhance the realism of garment and human body collision in real-time fabric simulation, an automated human body fitting collision method based on the bounding box and mesh method is proposed. According to the human skeletal structure and garment type, the skeletal information involved in collision simulation is effectively optimized, so as to better obtain the feature points of the human body and semantically segment them. According to the characteristics of skinning animation, simple capsule colliders and mesh colliders are generated to fit the geometric shape of the human body, and the dynamic following of colliders is …

Method For Extracting Data During Flight Phase Of Ski Jumping Based On Monocular Video, Ziyi Shen, Meng Yang, Chao Yang, Weidi Tang, Xie Wu, Yu Liu, Bin Sheng

Journal of System Simulation

Abstract: To solve the problem of the high difficulty factor of ski jumping and the difficulty of extracting data of this sport due to the danger of invasive devices such as wearable sensors and high price, a method for extracting data during the flight phase of ski jumping based on monocular video is proposed. The distortion and background clutter of the monocular video are preprocessed. The distortion of the captured images is corrected by calibrating camera parameters, and the background is removed by the inter-frame difference method. The human pose recognition library, namely OpenPose is used to initially identify the …

Fall Detection Method Of Digital Sequence Based On Fusion Strategy, Riming Sun, Hu Guo, Li Zou, Jiaqi Mao, Shengfa Wang

Journal of System Simulation

Abstract: Falls have become the primary cause of disability due to injury for the elderly. Timely and accurate warning of fall events is an important link to rescue work. In order to improve the accuracy of fall detection, a fall detection method based on a fusion strategy is proposed, which considers both the integrity of high-dimensional digital sequences and the specificity of different dimensions. The input digital sequences obtained from the wrist portable sensor are processed by window segmentation according to the saliency of resultant acceleration, so as to ensure the timing of the data and improve the identifiability of …

Style Transfer Network For Generating Opera Makeup Details, Fengquan Zhang, Duo Cao, Xiaohan Ma, Baijun Chen, Jiangxiao Zhang

Journal of System Simulation

Abstract: To address the problem of the loss of local style details in cross-domain image simulation, a ChinOperaGAN network framework suitable for opera makeup is designed from the perspective of protecting the excellent traditional culture. In order to solve the style translation of differences in two image domains, multiple overlapping local adversarial discriminators are proposed in the generative adversarial network. Since paired opera makeup data are difficult to obtain, a synthetic image is generated by combining the source image makeup mapping to effectively guide the transfer of local makeup details between images. In view of the characteristics of opera makeup …

Research Progress Of Intelligent Drilling Equipment And Technology, Zhang Xinxin, Liang Bowen, Zhang Xiaolong, Zhang Shaohe, Jin Xin

Coal Geology & Exploration

For the development and utilization of complex marine and continental oil and gas resources, and some problems of heterogeneity and uncertainty inevitably encountered during the drilling under complex geological conditions, it is urgent to create opportunities for the development of intelligent drilling technology and equipment using the high-end information such as artificial intelligence, big data and machine learning. Herein, the intelligent drilling system and its basic components were described, mainly including the field surface intelligent control platform, the data measurement communication control network system, the downhole intelligent steering drilling system and the remote real-time intelligent control center system. Besides, the …

Development And Prospect Of Intelligent Control Of Geological Drilling Process, Lu Chengda, Gan Chao, Chen Luefeng, Chen Xin, Cao Weihua, Wu Min

Coal Geology & Exploration

The complex and ever-changing geological environment and harsh conditions pose enormous challenges to the control of geological drilling process. The flourishing development of frontier technologies such as big data and artificial intelligence has brought new opportunities to the development of drilling industry. Firstly, the development status of intelligent control of geological drilling process is elaborated from 3 aspects: Sensing and modelling of drilling process, intelligent optimization of drilling process and drilling process control. In terms of sensing and modelling of drilling process, various geological environment models have been established using multi-source information of drilling process, which enables the sensing of …

Intelligent Lithology Prediction Method Based On Vibration Signal While Drilling And Deep Learning, Wang Sheng, Lai Kun, Zhang Zheng, Bai Jun, Luo Zhongbin, Li Bingle, Zhang Jie

Coal Geology & Exploration

Intelligent lithology prediction is of great importance in geological drilling, capable of improving exploration and mining efficiency, as well as the quality of results. In this study, a method of intelligent lithology prediction while drilling was proposed based on the vibration signals produced by the drill bit breaking rocks during drilling. Specifically, seven types of rocks with the same size and different lithologies were selected, and a micro-drilling experiment was designed to apply different drilling rates and rotary speeds to the rocks, in order to collect the triaxial vibration signals while drilling under multiple drilling conditions. The signals were preprocessed …

Research On Coal-Rock Interface Recognition System Based On Drilling Parameters, Wang Jie

Coal Geology & Exploration

In response to the problems of untimely and inaccurate coal-rock interface recognition and lack of appropriate technical means during the construction of cross-seam drilling for gas drainage by bottom drainage roadway, a coal-rock interface recognition system based on drilling parameters (rotational speed, rotary torque, propulsion force, advance velocity, crushing work ratio) was developed. The entire system consists of a data sensing layer, a data acquisition layer and a data analysis layer. Among them, the data sensing layer and the data acquisition layer are also collectively called the drilling data acquisition system, which can collect the drilling parameters in real time. …

Prediction Of Crack Width Of Drilling Fluid Leakage Based On Neural Network, Wang Jian, Xu Jiafang, Zhao Mifu, Wang Bowen, Wang Yahua, Chen Jie, Wang Xiaohui, Yang Gang, Ma Tengfei

Coal Geology & Exploration

During the drilling, it is difficult to select the appropriate leakage prevention and plugging methods and materials as the development of reservoir fractures is unknown. Herein, a reservoir crack width prediction method based on neural network was proposed with reference to the actual history data of wells. Firstly, the main influencing factors of reservoir fracture width were explored and ranked by correlation analysis, and seven main influencing factors, including pump pressure, drilling fluid displacement and drilling speed, were selected as the input parameters. The rate of convergence of the model was improved using the additional momentum algorithm and the variable …

Design Of Attitude Monitoring System For Directional Drilling Continuous Coring Tools, Lin Tingting, Liu Zekai, Ma Yinlong, Zhu Jinbao

Coal Geology & Exploration

Directional drilling continuous coring, as an emerging geological exploration technique, holds vast potential in the field of mineral resource exploration. To facilitate the development of directional continuous coring tools with proprietary intellectual property rights, an attitude monitoring system based on attitude sensing and wireless communication technology was designed in this paper. Concerning the hardware system design, the MPU9250 attitude sensor and STM32F103C8T6 main control chip were adopted to monitor the attitude change of drilling tools, where the communication through geological layers was achieved using a LoRa wireless module. Additionally, to accommodate the structural of the drilling tool and the requirements …

Tracking Control Of Drilling Robot Feed Force Based On An Equivalent-Input-Disturbance, Li Wangnian, Lu Chengda, Zhang Youzhen, Song Haitao, Tian Shengnan, Huang Hengyu, Chen Luefeng, Wu Min

Coal Geology & Exploration

During the underground construction of gas extraction hole in coal mine, the feeding system of drilling robot is used for pressurization, decompression and feeding in drilling process. In view of the problem that the uncertain disturbance of complex strata affects the working performance of drilling robot and the quality and efficiency of drilling construction, the structural composition and drilling construction technology of drilling robot were analyzed at first. The mathematical model of pressure reducing valve control was established according to the working principle of its feed system, and the mapping relationship between the control input, the electromagnet current, and the …

A Deep Bilstm Machine Learning Method For Flight Delay Prediction Classification, Desmond B. Bisandu, Irene Moulitsas

Journal of Aviation/Aerospace Education & Research

This paper proposes a classification approach for flight delays using Bidirectional Long Short-Term Memory (BiLSTM) and Long Short-Term Memory (LSTM) models. Flight delays are a major issue in the airline industry, causing inconvenience to passengers and financial losses to airlines. The BiLSTM and LSTM models, powerful deep learning techniques, have shown promising results in a classification task. In this study, we collected a dataset from the United States (US) Bureau of Transportation Statistics (BTS) of flight on-time performance information and used it to train and test the BiLSTM and LSTM models. We set three criteria for selecting highly important features …

Rgb-D Saliency Object Detection Based On Cross-Refinement And Circular Attention, Qingqing Dong, Hao Wu, Wenhua Qian, Fengling Kong

Journal of System Simulation

Abstract: In order to solve the problems that the boundary of the saliency object detection area is vague, and the detection area is incomplete or inaccurate, an RGB-D saliency object detection method based on cross-refinement and circular attention is proposed. A cross-refinement module is designed at the stage of extracting features using encoders, which is used to supplement feature information of each other and improve the feature quality before fusion. It also suppresses the negative impact of poor-quality depth maps and addresses the issue that the edges of the saliency object are blurred. For the features after fusion, the circular …

Aircraft Assignment Method For Optimal Utilization Of Maintenance Intervals, Runxia Guo, Yifu Wang

Journal of System Simulation

Abstract: The aircraft assignment problem is studied from a maintenance assurance perspective. In order to ensure its continuous airworthiness, civil aircraft are required to perform maintenance tasks, i. e., scheduled inspections, at specified intervals. The scheduled inspection interval is usually controlled by the number of flight cycles (FC), flight hours (FH), or flight days (FD), whichever comes first. In order to make balanced use of the inspection interval, an aircraft assignment model for a given fleet size is developed to optimize the maintenance interval utilization, and it is solved by a reinforcement learning algorithm to minimize the variance of the …

Virtual Navigation Path Planning Based On Octree Potential Field For Endonasal Endoscope, Wenjing Li, Yanlin Luo, Yuhui Wang, Li Zhu

Journal of System Simulation

Abstract: Virtual navigation can intuitively display the internal structure of human tissue from multiple viewpoints. The navigation path planning algorithm is the key to achieving excellent navigation effects. The traditional centerline extraction algorithm can ensure a wide field of view during navigation, but the time efficiency is not high enough on the complex nasal-skull base volume model. To solve the problem, a rapid navigation path planning algorithm based on the octree potential field is proposed. The space outside the obstacles is modeled by an octree, and the octree potential field is constructed by calculating the potential of all the octree …

Research Status And Development Trend Of Near-Bit Mwd In Underground Coal Mine, Hao Shijun, Chu Zhiwei, Li Quanxin, Fang Jun, Chen Long, Liu Jianlin

Coal Geology & Exploration

Near-bit meusurement while drilling (MWD) integrates several key technologies such as near-bit multi-parameter measurement, power supply and communication across positive displacement motor drills, turbine continuous power generation and high-speed mud pulse wireless transmission, capable of obtaining various types of parameters near the bit. It is one of the key components of intelligent drilling technology in underground coal mine. Herein, the limitation of the existing technology applied in coal mine was analyzed with full reference to the development experience and development path of near-bit MWD in the field of surface oil and gas drilling. Meanwhile, the research idea of near-bit MWD …

A "Boreing" Night Of Observations Of The Upper Mesosphere And Lower Thermosphere Over The Andes Lidar Observatory, J. H. Hecht, Alan Liu, D. C. Fritts, R. L. Walterscheid, L. J. Gelinas, R. J. Rudy

Publications

A very high-spatial resolution (∼21-23 m pixel at 85 km altitude) OH airglow imager at the Andes Lidar Observatory at Cerro Pach´on, Chile observed considerable ducted wave activity on the night of October 29-30, 2016. This instrument was collocated with a Na wind-temperature lidar that provided data revealing the occurrence of strong ducts. A large field of view OH and greenline airglow imager showed waves present over a vertical extent consistent with the altitudes of the ducting features identified in the lidar profiles. While waves that appeared to be ducted were seen in all imagers throughout the observation interval, the …

Training Simulation Scenario Generation Based On Particle Swarm Optimization, Jianxing Gong, Zimu Wang, Qilong Yang

Journal of System Simulation

Abstract: The training effect in the training simulation scenario is not ideal. Therefore, in order to obtain the training simulation scenario with a better training effect, the training simulation scenario is optimized, and a training simulation scenario generation method based on the PSO algorithm is proposed. A fitness function is constructed based on the improved situation assessment method of the power field model, and the ability weight parameters are determined by combining the improved AHP with computer simulation software; by instantiating particles with the attributes of the combat platform, the particle swarm optimization algorithm is improved to solve the optimization …

Deceptive Path Planning In Fog Of War, Dejun Chen, Zihao Fang, Yunxiu Zeng, Kai Xu

Journal of System Simulation

Abstract: Computer generated forces (CGFs) are virtual combat force objects created by computers and critical elements in the field of military simulation. Deceptive path planning is a basic method of deceptive behavior, which is important for improving the intelligence and competitiveness of CGFs. However, the current combination of deceptive behavior and military simulation is insufficient, and classical path planning methods cannot effectively take advantage of the partial observability of the battlefield and achieve better deceptive effects. To solve these problems, we propose four new deceptive path planning methods by re-defining a single circular fog road network based on road networks …

Formation Obstacle Avoidance Algorithm Based On Joint Virtual Sub-Target And Boundary Force, Man Wang, Dapeng Li, Lianghui Ding, Tianlin Zhu

Journal of System Simulation

Abstract: In view of the formation control of leader-follower swarm and obstacle avoidance in artificial potential field method in unmanned aerial vehicle (UAV) swarm formation system under complex environmental conditions, an obstacle avoidance algorithm for UAV swarm formation based on joint virtual sub-target and boundary force (JVBF) is proposed. The leader-follower method based on a virtual sub-target is used, and the modified force function is optimized to realize the formation control of the UAV swarm, so as to help the follower UAV to recover the formation quickly; the artificial potential field method based on boundary force is used for local …

Mapping The Delineation Of Practice To The Amia Foundational Domains For Applied Health Informatics, Annette L Valenta, Damian Borbolla, Gloria Deckard, Laverne Manos

Faculty, Staff and Student Publications

OBJECTIVE: This article reports on the alignment between the foundational domains and the delineation of practice (DoP) for health informatics, both developed by the American Medical Informatics Association (AMIA). Whereas the foundational domains guide graduate-level curriculum development and accreditation assessment, providing an educational pathway to the minimum competencies needed as a health informatician, the DoP defines the domains, tasks, knowledge, and skills that a professional needs to competently perform in the discipline of health informatics. The purpose of this article is to determine whether the foundational domains need modification to better reflect applied practice.

MATERIALS AND METHODS: Using an iterative …

Using Artificial Intelligence To Learn Optimal Regimen Plan For Alzheimer’S Disease, Yongbin Chen, Alzheimer’S Disease Neuroimaging Initiative, Australian Imaging Biomarkers And Lifestyle Flagship Study Of Ageing, Qiying Dai, Xiaoyang Li, Xiaoqian Jiang, Nansu Zong

Faculty, Staff and Student Publications

BACKGROUND: Alzheimer's disease (AD) is a progressive neurological disorder with no specific curative medications. Sophisticated clinical skills are crucial to optimize treatment regimens given the multiple coexisting comorbidities in the patient population.

OBJECTIVE: Here, we propose a study to leverage reinforcement learning (RL) to learn the clinicians' decisions for AD patients based on the longitude data from electronic health records.

METHODS: In this study, we selected 1736 patients from the Alzheimer's Disease Neuroimaging Initiative (ADNI) database. We focused on the two most frequent concomitant diseases-depression, and hypertension, thus creating 5 data cohorts (ie, Whole Data, AD, AD-Hypertension, AD-Depression, and AD-Depression-Hypertension). …

Synthesis, Characterization, Antibacterial Activity, And Potential Water Filter Application Of Copper Oxide/Zeolite Composite, Elfa Aida Kamila, Zaenal Abidin, Irma Isnafia Arief, Trivadila Trivadila

Makara Journal of Science

Detection of E. coli bacteria in water samples can indicate the presence of other bacterial contamination in feces. Bacterial contamination can be treated with antibiotics, but excessive use of antibiotics leads to the emergence of multiresistant bacteria. Therefore, alternative antibacterial agents must be explored. Copper ion/zeolite composite has been widely studied as an antibacterial agent. However, the released copper ions accumulate in water and are toxic to humans; this can be prevented by converting copper ions into copper oxides (CuO and Cu₂O). In this study, copper oxide/zeolite composite is synthesized and characterized using the heating method, followed by …

Synthesis Of Copper (Ii) Oxide Nanoparticles Using Vitis Vinifera L. Leaf Ex-Tract And Its Application As A Catalyst In Doebner Reaction, Felie Virgayani Kurniawan, Antonius Herry Cahyana, Rika Tri Yunarti

Makara Journal of Science

Plant extracts can be used to synthesize nanoparticle because it is efficient, economical, and friendly to the environment. Copper oxide nanoparticles (CuO NPs) were synthesized using an aqueous fraction of Vitis vinifera L leaf extract and Cu(NO₃)₂ solution as a precursor. This fraction contains secondary metabolites as a reduction agent and stabilizing agents to formed CuO NPs. CuO NPs can be used as a catalyst in a chemical reaction, one of which is the Doebner reaction, which is a simple and efficient reaction of aniline, aromatic aldehydes, and pyruvic acid under reflux conditions to produce derivatives quinoline-4-carboxylic …