Physical Sciences and Mathematics Commons^™

Hls Taking Flight: Toward Using High-Level Synthesis Techniques In A Space-Borne Instrument, Marion Sudvarg, Chenfeng Zhao, Ye Htet, Meagan Konst, Thomas Lang, Nick Song, Roger D. Chamberlain, Jeremy Buhler, James H. Buckley

Computer Science Faculty Research & Creative Works

FPGAs are widely deployed on high-energy astrophysics telescopes to preprocess and reduce sensor data read out by front-end electronics. Across instruments, these computational pipelines have similar semantics, sharing common stages such as pedestal subtraction, signal integration, zero-suppression, island detection, and centroiding. However, diverse telescope designs require unique implementations of these algorithms, and the logic is often rewritten from scratch for a new instrument. As an alternative, High-Level Synthesis (HLS) tools enable these algorithms to be implemented in a high-level language, which eases modifications and enables fast prototyping and deployment. Nonetheless, writing performant HLS code requires augmentation of the code with …

Butte Priority Soils Operable Unit (Bpsou) Draft Final Insufficiently Reclaimed Sites Field Sampling Plan (Fsp) Bres No. 45 – Garfield, Mike Mcanulty

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Re: Butte Priority Soils Operable Unit (Bpsou) Draft Final Insufficiently Reclaimed Sites Field Sampling Plan (Fsp) Bres No. 52 – Moscow Dump., Mike Mcanulty

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Re: Butte Priority Soils Operable Unit (Bpsou) Draft Final Insufficiently Reclaimed Sites Field Sampling Plan (Fsp) Bres No. 74 – West Gagnon Dump., Mike Mcanulty

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Re: Butte Priority Soils Operable Unit (Bpsou) Draft Final Insufficiently Reclaimed Sites Field Sampling Plan (Fsp) Bres No. 125 – Child Harold-2 Dump., Mike Mcanulty

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Using Multi-Scale Spatial Models Of Dendritic Ecosystems To Infer Abundance Of A Stream Salmonid, Xinyi Lu, Yoichiro Kanno, George P. Valentine, Jacob M. Rash, Mevin B. Hooten

Mathematics and Statistics Faculty Publications

1. Understanding patterns of species abundance is essential for planning landscape-level conservation. The complex hierarchies of dendritic ecosystems result in different levels of heterogeneity at distinct geographic scales. Species responses to dynamic environmental drivers may also vary spatially depending on their interactions with landscape features. Monitoring abundance by explicitly quantifying their spatial and temporal variation is important for strategic management.

2. We analysed brook trout (Salvelinus fontinalis) count data collected from 173 sites in western North Carolina between 1989 and 2015. We developed a Bayesian hierarchical model that used single- and multi-pass electro-fishing data and characterized their respective …

Model To Demonstrate Effects Of Mass Transfer And Applied Current In An Electrolytic Cell, George Ankrah

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This study investigates the relationship between applied current and resulting cell potential in an electrolytic system, considering the transport of electroactive species. By applying Michael Faraday's laws of electrolysis and the Nernst-Planck equation, the behavior of electroactive species in diffusion-controlled systems with and without stirring is modeled. The plots demonstrate how stirring enhances ion transport and establishes a stable Nernst diffusion layer, affecting the kinetics of electrochemical reactions. Understanding these dynamics is crucial for optimizing electrolysis processes.

Review Of Cyclic Voltammetry Measurements For Uranium In Flinak Molten Salt, Jackson Ivory

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The electrochemical behavior of uranium FLiNaK molten salts is explored, focusing on cyclic voltammetry (CV) as a powerful tool for redox characterization and diffusion studies. Through a comprehensive review of recent research, the study highlights the significance of CV in understanding electrode kinetics, material compatibility, and process optimization in molten salt environments. The findings underscore the potential of FLiNaK molten salt reactors in advancing nuclear energy technologies, fuel processing, and waste management strategies. Collaborative interdisciplinary efforts are emphasized to address challenges and accelerate innovation in electrochemical methods for nuclear applications.

Model Of The Effect Of Voltage On Contact Angle In An Electrolytic Cell Reaction, Aaron Essilfie

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This paper investigates the hypothesis that the contact angle at the meniscus of an electrode-electrolyte can be altered during a redox reaction through the coupled understanding of electrowetting and capillarity rise. Recent studies in electrowetting have focused on dielectric surfaces but research on contact angle at the electrode-electrolyte surface is lacking. The study employs a basic electrolytic cell. By applying principles of electrowetting and capillary rise the research aims to understand the relationship between applied voltage and contact angle, to advancements in electrochemistry and microfluidics.

An Overview Of How To Measure The Kinetic Properties Of An Anode Material For The Chlorine Evolution Reaction, Cameron Vann

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The process of generating chlorine gas using electrolysis in aqueous systems is well established. However, a new process requires chlorine to be generated at high temperatures using molten salt. This harsh environment requires a new study of anode materials for the chlorine evolution reaction. Anode materials can be compared by their kinetic parameters, the transfer coefficient α and the exchange current i0. The basic theory of these properties as they relate to the chlorine evolution reaction has been detailed and an analysis method for finding these effective parameters has been shown and demonstrated.

Probing The Surface Structure Of Ferrocene Modified Electrodes Using Cyclic Voltammetry, Rebekah S. Stanley

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

Modifying electrodes imparts new electrochemical properties for use in various applications. To fully understand these electrochemical properties the structure of the modified surface needs to be characterized. Cyclic voltammetry (CV) offers a quick and simple way to determine if the surface structure has been homogeneously modified even at low surface concentrations. Nonideal responses in CV scans give insights to the microenvironments and structure of the monolayer surface that may be indistinguishable in other techniques. Peak fitting CV data, coupled with other surface techniques, can further characterize the contributions and nature of these microenvironments and aid in structural determination.

Re: Butte Priority Soils Operable Unit (Bpsou) Draft Final Insufficiently Reclaimed Sites Field Sampling Plan (Fsp) Bres No. 49 – Old Glory., Mike Mcanulty

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Living Emission Abolish Filters (Leafs) For Methane Mitigation: Design And Operation, Richard Hamilton, Nicholas Griffith, Peter Salamon, Robert Handler, Marina G. Kalyuzhnaya

Michigan Tech Publications

As one of the most potent greenhouse gases, methane is a critical target for the near-term mitigation of global warming. Efficient, scalable, easy-to-implement, and robust mitigation technologies are urgently needed to assist in reaching methane abolishment. The goal of this research was to test the applicability of active, extremophilic methanotrophic cells as a baseline concept for engineered systems aiming at methane capturing. The system, named living emission abolish filters (LEAFs), represents an array of immobilized biomaterials capable of capturing methane directly from vent streams. The biomaterials were made using cells of Methylotuvimicrobium alcaliphilum 20ZR, a robust halophilic methanotrophic bacterium with …

Developing And Validating A Nomogram For Early Predicting The Need For Intestinal Resection In Pediatric Intussusception, Shi-Kun Guo, Zhong-Rong Li, Hui-Ya Huang, Xiao-Zhong Huang

Faculty, Staff and Student Publications

PURPOSE: Develop and validate a nomogram for predicting intestinal resection in pediatric intussusception suspecting intestinal necrosis.

PATIENTS & METHODS: Children with intussusception were retrospectively enrolled after a failed air-enema reduction in the outpatient setting and divided into two groups: the intestinal resection group and the non-intestinal resection group. The enrolled cases were randomly selected for training and validation sets with a split ratio of 3:1. A nomogram for predicting the risk of intestinal resection was visualized using logistic regression analysis with calibration curve, C-index, and decision curve analysis to evaluate the model.

RESULTS: A total of 547 cases were included …

Surmounting Challenges In Aggregating Results From Static Analysis Tools, Dr. Ann Marie Reinhold, Brittany Boles, A. Redempta Manzi Muneza, Thomas Mcelroy, Dr. Clemente Izurieta

Military Cyber Affairs

Aggregation poses a significant challenge for software practitioners because it requires a comprehensive and nuanced understanding of raw data from diverse sources. Suites of static-analysis tools (SATs) are commonly used to assess organizational security but simultaneously introduce significant challenges. Challenges include unique results, scales, configuration environments for each SAT execution, and incompatible formats between SAT outputs. Here, we document our experiences addressing these issues. We highlight the problem of relying on a single vendor's SAT version and offer a solution for aggregating findings across multiple SATs, aiming to enhance software security practices and deter threats early with robust defensive operations.

Generative Machine Learning For Cyber Security, James Halvorsen, Dr. Assefaw Gebremedhin

Military Cyber Affairs

Automated approaches to cyber security based on machine learning will be necessary to combat the next generation of cyber-attacks. Current machine learning tools, however, are difficult to develop and deploy due to issues such as data availability and high false positive rates. Generative models can help solve data-related issues by creating high quality synthetic data for training and testing. Furthermore, some generative architectures are multipurpose, and when used for tasks such as intrusion detection, can outperform existing classifier models. This paper demonstrates how the future of cyber security stands to benefit from continued research on generative models.

Determining The Exit State Of Centrifugal Pumps And Compressors, Chase Oliphant

Utah Space Grant Consortium

Meanline performance models have a rich history in the design of radial flow pumps and compressors. These models are typically based on point data, such as static pressures and temperature measurements at walls, along with occasional traverses to capture additional flow field details. These point measurements, while valuable, do not fully characterize the internal flow behavior within the machine. The Two-Zone model, developed by Japikse and others, is a meanline model based on these measurements to predict machine performance. It posits that the flow at the impeller exit consists of two distinct zones: a primary zone assumed to be isentropic …

Investigation Of Poly(Olefin Sulfone) Depolymerization And Its Dust Mitigation Abilities For Potential Use On Spacecraft, Alexandra Stapley, Walter Paxton, David Allred

Utah Space Grant Consortium

The ubiquity of particulate contamination requires dust mitigation techniques to provide low-scatter surfaces and edges on sensitive optical devices in space. Poly(olefin sulfone)s have been shown to photodegrade with the assistance of a photobase generator when exposed to UV light (254 nm) and heat (120°C). These may be applicable to minimizing dust on optical surfaces for space applications. However, their behavior in vacuum has not been fully characterized. We synthesized poly(2-methyl-1-pentene sulfone) (PMPS) and poly(1-hexene sulfone) (PHS) with and without a photobase generator. We studied the photodegradation (172 nm or 254 nm) of thin films in vacuum. Spectroscopic ellipsometry was …

Creating Models Of Inter-Panel Slipping In Rolled Gossamer Arrays, Nathan Coleman

Utah Space Grant Consortium

Many deployable satellite systems benefit from having low mass and high surface area, which has led to the proliferation of gossamer structures in space-based applications. Gossamer structures are characterized by lightweight, low stiffness membranes, which can flex and roll to compactly stow. An effect of rolling a gossamer structure is that there is tangential separation along adjacent panels as they roll, resulting in relative motion between panels. To aid designers in predicting and accommodating this motion, a method for modeling the slippage between adjacent panels that occurs while rolling is presented. This analytical slippage model and algorithm is a function …

Discovering What Cannot Be Seen: Dust Attenuation Modeling In Early-Type Galactic Nuclei, Nonnie Bash, Benjamin Boizelle

Utah Space Grant Consortium

Black holes (BHs) are believed to reside at the center of every luminous galaxy. Increasingly accurate techniques are now seeking to expand the BH census. Most of these primary techniques account for extended masses by using a stellar luminosity profile derived from optical or near-IR imaging. About 10% of early type galaxies (ETGs) contain a circumnuclear, dusty disk that obscures much of the stellar light originating from behind this thin disk. Few studies have accurately accounted for dust obscuration, or even acknowledged its effect on a BH mass measurement. In this work, we introduce a sample of ETGs with wide …

Expanded Fabrication Of Terahertz Metal Mesh Filters, Jared E. Payne, Joseph Eddy, Hunter R.J. Stevenson, Brad Ferguson, Ryan T. Beazer, Gregory N. Nielson, Stephen M. Schultz

Utah Space Grant Consortium

A metal mesh filter is fabricated by creating metallic squares on a dielectric substrate. This capacitive metallic filter is fabricated using direct write laser ablation consisting of a femtosecond laser in combination with a high numerical aperture objective. A galvanometer beam scanning system is implemented to improve filter size by 12.5x from the previously demonstrated 2x2 mm filter. The transmission and reflection characteristics are discussed.

Constant-Thickness Accommodation By Pattern Modification For Origami Flashers, H. Pruett, S. Magleby, L. Howell

Utah Space Grant Consortium

Thickness accommodation is one of the most significant challenges in creating an origami flasher array. If it is a membrane array, thickness accommodation is generally simpler as panel deformation allows the array to wrap about itself with relative ease. However, for rigid-panel arrays, thickness accommodation is considerably more complicated. This works develops thickness accommodation techniques that yield origami-inspired mechanisms of constant thickness and high-volume efficiency. In this paper, current methods for accommodating thickness in flashers are presented and issues associated with those methods are discussed. Two methods for accommodating thickness in flashers such that panels are constant thickness are proposed.

Optimizing Turbulence Generation For Studying The Dynamics Of Particle Laden Flows, Rhett T. Parry, Tim Berk

Utah Space Grant Consortium

In order to extend the study of particle dynamics into a turbulent fluid regime, novel apparatuses must be developed to simulate desired environments. Synthetic jets are a compact and adaptable tool to generate turbulent flows, however, current studies on synthetic jets are not focused on generating optimal turbulence. Our study seeks to understand how important physical parameters influence the generation of turbulence. By relating far field behavior to near field influence, the parameters that govern a synthetic jet can be specified to produce a jet with desired flow characteristics. We find scalings of velocity, momentum flux, and energy flux that …

Modeling The Effects Of Retinal Thinning And Oxidative Stress During Space Travel, Dillon Weatherston, Dylan Nelson, Justin Jones, Elizabeth Vargis

Utah Space Grant Consortium

Spaceflight causes both physical and chemical changes within the subretinal tissue, particularly the retinal pigment epithelium (RPE) and Bruch’s membrane. Changes such as layer thinning and increases in oxidative stress are both implicated in vision loss caused by spaceflight. While these changes can lead to cell death, the mechanistic impact that these changes have on retinal function are unknown. To isolate the physical alterations to the subretinal tissue caused by space travel, we utilized a tunable in vitro model of Bruch’s membrane and primary porcine RPE cells. Initial results showed that while thinner models can be constructed, they are difficult …

Evaluation Of Clinical Features Of Venturi Adapters For Cpap In Procedural Sedation, Trey Blackwell, Joseph Orr, Derek Sakata, Kai Kuck

Utah Space Grant Consortium

Research has shown that CPAP therapy reduces airway obstruction and oxygen desaturation during procedural sedation. However, the cost and real estate associated with a non-invasive ventilator render this an impractical approach. A Venturi adapter is an alternative device for administering CPAP, which amplifies oxygen flows to produce high flows sufficient for CPAP with cheap and compact hardware. A clinically useful Venturi adapter will generate low noise levels, exhibit high efficiency for generating pressures with low oxygen flows, and minimally dilute the end-tidal carbon dioxide sample for monitoring. To meet these needs, we designed and resin-printed a custom Venturi adapter for …

Developing Membrane Hinges To Enable Predictable And Reliable Arrays For Spacecraft, Mitchel Skinner, Andrew Geyser, Brandon Sargent, Spencer Magleby, Larry Howell

Utah Space Grant Consortium

Deployable space structures that incorporate thin, flexible solar cells allow for innovative designs that are capable of high stowing efficiency. The purpose of this work is to present an approach to predicting the deflection of deployable space structures with flexible panels connected with thin sheets as a function of their material properties, geometry, and applied moments. Related methods are described. An analytical model and finite element analysis are compared and validated with a physical model. The end angle, coordinates, and radius of curvature of each segment are calculated and the results are compared. Important factors related to the reliability of …

Chemical Herding: Using Chemical Reactions To Steer Colloidal Particles, Mark N. Mcdonald, Cameron K. Peterson, Douglas R. Tree

Utah Space Grant Consortium

Creating the next generation of dynamic colloidal materials that change their structure based on external stimuli may require the capability to precisely manipulate colloidal particles. Colloidal particles can be manipulated using a variety of forces, such as electric, magnetic, and optical, but so far chemical reactions have received less attention. We consider here a novel paradigm for using a chemically active colloidal particle to interact with other, passive colloids and precisely manipulate colloidal particles in a microfluidic device, a strategy which we dub “chemical herding”. Specifically, we show in simulation that chemical herding can be used to move a small …

Novel Apparatus For Studying The Effect Of Gravity On The Dynamics Of Particle Laden Flows, Ryan Lewis, Tim Berk

Utah Space Grant Consortium

Dust is a major concern for NASA Lunar and Martian missions due to its abrasive nature tendency to cover equipment. However, little is known how dust behaves in low gravity environments. This paper studies the methodology and validation of a novel apparatus that will simulate low gravity using upward coulomb forces. A parametric study found that the optimized charging parameters to create a charged particle stream, using corona discharge, was a wire-plate spacing of 25 mm at 8 kV and 30 mm at 9 kV. Future work will expand the platform to simulate low gravity in turbulent conditions.

Rr Lyrae Variable Star Light Curves As Audible Sound, Isaac Bentley, Jonathan Barnes

Utah Space Grant Consortium

RR Lyrae stars have light curves that look similar to sound waves inspiring curiosity as to how they might audibly sound. Differences in the composition of RR Lyrae, a property called metallicity, creates slight differences in their light curves. We aim to first convert these light curves to audio, and secondly, see if the difference in metallicity is perceptible. We did this by using publicly available magnitude data taken at several instances of time to create the light curve for one cycle. We processed this data using a Python script to produce a Fourier fit and sound file.

Production Of Steel From Lunar Regolith Through Carbonyl Iron Refining (Cir), Collin T. Andersen, John F. Otero, Olivia Dale, Christian Norman, Cole Walker, Jason Sheets, Talon Townsend, Juliana Ortiz, Olivia Slane, Hong Yong Sohn, Michael F. Simpson, Zhigang Z. Fang

Utah Space Grant Consortium

Transporting equipment to the moon is extremely cost-prohibitive, and competition is fierce over a limited cargo volume. Freight impediments are circumvented if the required material can be harvested, processed, and shaped at the destination. The hostile and remote environment constrains candidate technologies to establish a production pipeline with minimal equipment volume and a low dependence on consumables.