Physical Sciences and Mathematics Commons^™

Managing Usda Wildfire Crisis Strategy Landscapes In The Intermountain West (Region 4): A Program For Training Future Forest Managers, Justin Derose

Funded Research Records

No abstract provided.

Photolysis And Sublimation Chemistry Of Ammonium Cyanide With Relevance To Cometary Environments, O. H. Wilkins, K. M. Yocum, Vincent J. Esposito, E. Harel, S. N. Milam, P. A. Gerakines

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Bulk nitrogen is depleted in solar system objects, including the terrestrial planets, chondritic meteorites, and comets. Recently, it was suggested that cometary nitrogen may be locked up in ammonium salts—ionic solids comprising ammonia (NH₃) and an acid such as hydrogen cyanide (HCN)—based on Rosetta/ROSINA data from comet 67P/Churyumov–Gerasimanko. Among the proposed salts to have been found in 67P were ammonium cyanide (NH₄CN) and ammonium cyanate (NH₄OCN), which were inferred from identifying HCN, cyanamide (NH₂CN), and isocyanic acid (HNCO) in the mass spectrometry data collected in the coma of 67P. However, the relationship …

Face-Magic Labelings Of Polygonal Graphs, Wai Chee Shiu, Richard M. Low, Andy K. Liu

Theory & Applications of Graphs

For a plane graph $G = (V, E)$ embedded in $\mathbb{R}^2$, let $\mathcal{F}(G)$ denote the set of faces of $G$. Then, $G$ is called a \textit{$C_n$-face-magic graph} if there exists a bijection $f: V(G) \to \{1, 2, \dots, |V(G)|\}$ such that for any $F \in \mathcal{F}(G)$ with $F \cong C_n$, the sum of all the vertex labels along $C_n$ is a constant $c$. In this paper, we investigate face-magic labelings of polygonal graphs.

A Characterization Of Chordal Graph Without Sun And Co-Rising Sun As Convex Geometry, Silvia B. Tondato

Theory & Applications of Graphs

In this paper we introduce the notion of $t_3$ \textit{convexity}, a natural restriction of triangle convexity. A \textit{triangle path} is a path allowing just short chords. A triangle path $P$ between two non-adjacent vertices in a graph $G$ is called $t_3$ \textit{path} if the first vertex of $P$ is among vertices from $P$ adjacent only to the second vertex of $P$, and the last vertex of $P$ is among vertices from $P$ adjacent only to the second-last vertex of $P$. A set $S \subseteq V(G)$ is $t_3$ \textit{convex} if for any two non-adjacent vertices $x, y \in S$ any vertex …

Failed Zero Forcing Numbers Of Trees And Circulant Graphs, Luis Gomez, Karla Rubi, Jorden Terrazas, Rigoberto Florez, Darren A. Narayan

Theory & Applications of Graphs

Given a graph $G$, the zero forcing number of $G$, $Z(G)$, is the smallest cardinality of any set $S$ of vertices on which repeated applications of the forcing rule (described below) results in all vertices being in $S$. The forcing rule is as follows: if a vertex $v$ is in $S$, and exactly one neighbor $u$ of $v$ is not in $S$, then $u$ is added to $S$ in the next iteration. Zero forcing numbers have attracted great interest over the past 15 years and have been well studied. The zero forcing number is used to study the maximum nullity/minimum …

Umbrella Sampling Md Simulations For Retention Prediction In Peptide Reversed-Phase Liquid Chromatography., Pablo M Scrosati, Evelyn H Mackay-Barr, Lars Konermann

Chemistry Publications

Reversed-phase liquid chromatography (RPLC) is an essential tool for separating complex mixtures such as proteolytic digests in bottom-up proteomics. There is growing interest in methods that can predict the RPLC retention behavior of peptides and other analytes. Already, existing algorithms provide excellent performance based on empirical rules or large sets of RPLC training data. Here we explored a new type of retention prediction strategy that relies on first-principles modeling of peptide interactions with a C18 stationary phase. We recently demonstrated that molecular dynamics (MD) simulations can provide atomistic insights into the behavior of peptides under RPLC conditions (Anal. …

Ferrate(Vi) Transformation Of Nitrogen In Secondary Wastewater Effluent: Implications For Water And Nutrient Management, Qiufeng Lin, Zepei Tang, Hussein I. Abdel Shafy, Yang Deng

Department of Earth and Environmental Studies Faculty Scholarship and Creative Works

Ferrate(VI) is a promising chemical agent for wastewater treatment. While targeting various contaminants, it can inevitably react with different water matrix constituents such as nitrogen (N) species. However, the reactions of ferrate(VI) with wastewater N compounds remain poorly understood. This study explores ferrate(VI)-mediated transformations of different N species in a secondary wastewater effluent. Ferrate(VI) oxidation minimally abated total dissolved nitrogen (TDN), while oxidizing dissolved organic nitrogen (DON) into dissolved inorganic nitrogen (DIN), primarily nitrate nitrogen (NO3--N), without noticeably altering ammonia nitrogen (NH3-N) levels. Consequently, ferrate(VI) treatment increased the fraction of bioavailable, soil-leachable NO3--N while lowering the portion of less bioaccessible …

The Southwest Climate Adaptation Science Center (Sw Casc), Michelle Baker

Funded Research Records

No abstract provided.

Identifying The Effect Of Architecture Morphology On Wind Fields And Pm2.5 Dispersion At The Urban Block Scale Via A Combined Scheme, Bin Guo, Lu Li, Xiaowei Zhu, Zheng Wang, Miaoyi Chen, Lin Pei, Tengyue Guo

Mechanical and Materials Engineering Faculty Publications and Presentations

This study explores the potential of architecture morphology to mitigate PM2.5 pollution through enhanced urban ventilation. Despite the recognized influence of building designs on wind and air pollution distribution at the urban block scale, specific mechanisms remain poorly understood. To address this gap, we have developed an integrative approach combining in-situ observations, Geographic Information System (GIS), Remote Sensing (RS), Computational Fluid Dynamics (CFD), and statistical modeling. Here, CFD simulates the flow field and PM2.5 dispersion, using in-situ observations for turbulence model selection. GIS quantify architecture morphology parameters to establish accurate CFD boundary conditions, ensuring simulations reflect real-world conditions and precise …

Cryogenic Hybrid Magnonic Circuits Based On Spalled Yig Thin Films, Jing Xu, Connor Horn, Yu Jiang, Amin Pishehvar, Xinhao Li, Daniel Rosenmann, Xu Han, Miguel Levy, Supratik Guha, Xufeng Zhang

Michigan Tech Publications

Yttrium iron garnet (YIG) magnonics has garnered significant research interest because of the unique properties of magnons (quasiparticles of collective spin excitation) for signal processing. In particular, hybrid systems based on YIG magnonics show great promise for quantum information science due to their broad frequency tunability and strong compatibility with other platforms. However, their broad applications have been severely constrained by substantial microwave loss in the gadolinium gallium garnet (GGG) substrate at cryogenic temperatures. In this study, we demonstrate that YIG thin films can be spalled from YIG/GGG samples. Our approach is validated by measuring hybrid devices comprising superconducting resonators …

Making The Most Of Artificial Intelligence And Large Language Models To Support Collection Development In Health Sciences Libraries, Ivan Portillo, David Carson

Library Articles and Research

This project investigated the potential of generative AI models in aiding health sciences librarians with collection development. Researchers at Chapman University’s Harry and Diane Rinker Health Science campus evaluated four generative AI models—ChatGPT 4.0, Google Gemini, Perplexity, and Microsoft Copilot—over six months starting in March 2024. Two prompts were used: one to generate recent eBook titles in specific health sciences fields and another to identify subject gaps in the existing collection. The first prompt revealed inconsistencies across models, with Copilot and Perplexity providing sources but also inaccuracies. The second prompt yielded more useful results, with all models offering helpful analysis …

Butte Reduction Works (Brw) Phase Ii Interim Demolition Plan Construction Drawings And Floodplain Encroachment Analysis, Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Kroger Post-Pandemic Customer Segmentation, Mario Mata, Joey Truitt, Renn Spigelmyer, Dhanuja Kasturiratna, Lisa Holden, Nitish Baidya, Hanna Tafari

Posters-at-the-Capitol

The grocery retail industry landscape has changed greatly in the wake of the pandemic. Specifically, delivery and pickup services have become more popular and customer buying habits have evolved. At the same time, improvements in data collection and analysis have allowed grocery marketing strategies to become highly individualized.

We worked with 84.51, an analytics firm, to identify customer segments for the Kroger Company based on data from 2023. Using clustering techniques, we organized customers into groups, or segments, based on similar characteristics. We identified and profiled four distinct groups of customers. Three segments were characterized by high frequency and spending …

The Affordable Diy Mandeye Lidar System For Surveying Caves, And How To Convert 3d Clouds Into Traditional Cave Ground Plans And Extended Profiles, Loris Redovniković, Antun Jakopec, Janusz Będkowski, Jurica Jagetić

International Journal of Speleology

The paper examines the potential use of low-cost LiDAR for cave surveying. Mobile mapping using LiDAR complements traditional speleological surveying using a polygonal traverse. These methods assist each other, with one serving as an independent control measurement for the other, ultimately resulting in a more accurate 3D model. The testing results show that achieving high accuracy and detailed cave representation is possible using open hardware and open-source software. Both spacious and well-indented cave sections and narrow passages barely passable by humans were successfully mapped. The surveying process is significantly faster than traditional cave mapping, as drawing cave sketches by hand …

Gravity Tunnel Dynamics At Non-Zero Tunnel Diameters, Shafat Mubin, Walker T. Hayes

Georgia Journal of Science

A standard exercise in undergraduate mechanics derives the trajectory of a particle that has been dropped through a gravity tunnel passing through the center of the Earth as simple harmonic oscillation, assuming uniform earth density and negligible tunnel radius. We show that when the more accurate Preliminary Reference Earth Model (PREM) density profile and non-negligible tunnel radii are taken into consideration, significant deviations from harmonic oscillation are observed along with increasing or decreasing average particle speeds. Furthermore, we report that a particle traveling along a diameter perpendicular to the axis of the gravity tunnel is unable to reach the center …

Confocal Laser Scanning Microscopy As A Method For Identifying Variation In Puparial Morphology And Establishing Characters For Taxonomic Determination, Christian Elowsky, Leon G. Higley

School of Natural Resources: Faculty Publications

Calliphoridae, or blow flies, are of much ecological and practical importance given their roles in decompositional ecology, medical and veterinary myiasis, and forensic entomology. As ephemeral and rapidly developing species, adults are frequently not present for identification, but puparia (the remaining outer integument of the third instar larvae) are frequently found. These heavily sclerotized remains are stable in the environment but they are of a conservative character. Historically, scanning electron microscopy (SEM) has been used for characterization, a technique which is not only time-consuming but also often expensive, effectively making large numbers of specimens impossible to quantify. As an alternative, …

Toward Alleviating The 𝐻₀ And 𝑆₈ Tensions With Early Dark Energy-Dark Matter Drag, T. Simon, T. Adi, J. L. Bernal, E. D. Kovetz, V. Poulin, Tristan L. Smith

Physics & Astronomy Faculty Works

Early dark energy, an additional component of dark energy active in the decade of redshift before recombination, has emerged as one of the most effective models at reducing the “𝐻₀ tension” between direct measurement of the Hubble parameter 𝐻₀ in the late Universe and the Λ CDM prediction when calibrated on Planck. However, it requires a slight increase in the dark matter density 𝜔_cdm and primordial tilt 𝑛_𝑠 that worsens the “𝑆₈ tension” between measurements of weak gravitational lensing at low redshifts and the Planck/Λ⁢CDM prediction. Using a phenomenological fluid model, we investigate whether the inclusion …

Hydrogen Diffusion Into Water And Cushion Gases – Relevance For Hydrogen Geo-Storage, Quoc Truc Doan, Alireza Keshavarz, Peter Behrenbruch, Stefan Iglauer

Research outputs 2022 to 2026

Hydrogen (H2) has been recognized as a promising solution to reduce carbon dioxide (CO2) emissions. H2 is considered a green energy carrier for energy storage, transport, and usage, and it can be produced from renewable energy resources (such as solar, hydropower, and wind energy). However, H2 is a highly diffusive compound compared to other natural gases, raising concerns about the possibility of H2 loss in geo-storage (e.g. in underground geological formations such as depleted oil/gas reservoirs, aquifers or shale formations) or H2 leak via pipelines when blending H2 with natural gas in existing pipeline systems. Thus, understanding H2 diffusion in …

01.13.2025 Ored Connect, Liz Williamson

ORED Newsletter

NIH Public Access Policy Update

Procurement Information for Award Spending online course announcement

National Sea Grant Law Center funding

Temporal Scales Of Sediment Accumulation, Mass Wasting, And Stratigraphy Across The Mississippi River Delta Front, Jeffrey E. Duxbury

LSU Doctoral Dissertations

The Mississippi River Delta Front (MRDF) is a subaqueous apron of rapidly deposited, weakly

consolidated sediment extending from the subaerial portions of the Mississippi River’s Birdsfoot Delta, historically known for sediment transport via mass wasting. To better understand the spatial and temporal dynamics of processes influencing the MRDF, 29 cores ranging from 5.8 to 8.71 meters in length were collected from the South Pass (SP) and Southwest Passes (SWP). These cores targeted specific depositional environments, including the undisturbed topset apron, medial mudflow gully, mudflow lobe, and prodelta. The cores were analyzed along their full lengths for gamma density, grain size, …

Spatial And Spectral Characterization Of The Gravitational-Wave Background With The Pta Optimal Statistic, Kyle A. Gersbach, Stephen R. Taylor, Patrick M. Meyers, Joseph D. Romano

Physics & Astronomy Faculty Publications

Pulsar timing arrays (PTAs) have made tremendous progress and are now showing strong evidence for the gravitational-wave background (GWB). Further probing the origin and characteristics of the GWB will require more generalized analysis techniques. Bayesian methods are most often used but can be computationally expensive. On the other hand, frequentist methods, like the PTA optimal statistic (OS), are more computationally efficient and can produce results that are complementary to Bayesian methods, allowing for stronger statistical cases to be built from a confluence of different approaches. In this work we expand the capabilities of the OS through a technique we call …

Counting Rotational Subsets Of The Circle $\Mathbb{R}/ \Mathbb{Z}$ Under The Angle-Multiplying Map $T\Mapsto Dt$, Ian Tan

Rose-Hulman Undergraduate Mathematics Journal

A rotational set is a finite subset $A$ of the unit circle $\mathbb{R}/ \mathbb{Z}$ such that the angle-multiplying map $\sigma_{d}:t\mapsto dt$ maps $A$ onto itself by a cyclic permutation of its elements. Each rotational set has a geometric rotation number $p/q$. Lisa Goldberg introduced these sets to study the dynamics of complex polynomial maps. In this paper, we provide a necessary and sufficient condition for a set to be $\sigma_{d}$-rotational with rotation number $p/q$. As applications of our condition, we recover two classical results and enumerate $\sigma_d$-rotational sets with rotation number $p/q$ that consist of a given number of orbits.

Feasibility Study For Providing Remedial Measures For Overburden Dump In New Majri Ug To Oc Mine, Wcl Majri Area, Warora, Chandrapur, Himanshu Kumar Jangir, Rahul Shende, Omkar Navagire, Srinivasan Venkatraman, Anirban Mandal, Anjan Patel

Journal of Sustainable Mining

The central region of India is abundant in fertile black cotton soil, and the presence of such weak floors in open-cast mines poses significant slope stability concerns for overburden (OB) dumps. Addressing these issues is crucial for ensuring safe mining operations and cost-effectiveness. Several coal mines in this region have experienced overburden dump collapses due to the weak soil foundation. To enhance slope stability and mitigate the heaving effect near the toe of the dump, this study proposes parametric research that explores the flattening of the overall slope angle of the dump, bench angle optimization, and various feasible dimensions for …

Optimization Of The Cross-Section Of Generic Flexible Bridges, Manal Kamal Zaki, Mina M. Helmy, Mark M. Tawadros

Journal of Engineering Research

This paper investigates the behavior of flexible bridges prone to aerodynamic instabilities due to wind. Optimal cross-sections that reduce aerodynamic forces are recommended. This is achieved by studying a variety of bridge sections with different widths of upper and lower sloping edges in addition to studying the upper and lower cramps of the deck. The wind velocities are also parameterized. Computations are developed based on the powerful computational fluid dynamics (CFD) method known as FLUENT and embedded in ANSYS software. For parametric study, a design of experiments (DOE) is performed based on the response surface methodology (RSM) combined with the …

Using Nanotechnology To Achieve Sustainability In Interior Residential Spaces, Neveen Youssef Azmy, Esraa Tarek Abu-El Azm, Ahmed Ahmed Rizk, Walaa Abou El-Haggag Mehanna

Journal of Engineering Research

Major scientific and technological developments characterize the present time. One notable achievement is the nano revolution, which has greatly influenced various areas of life Nanotechnology is characterized by using very small particles of materials, either alone or by processing them to create new materials with remarkable properties. Hence, nanotechnology offers promising economic solutions and products to achieve a reliable and sustainable environment. Architecture has great potential to benefit from this technology to achieve sustainability and improve indoor environment quality. Given the proliferation of residential buildings in urban areas, where people spend most of their time, it is necessary to integrate …

Evaluating Lidar Technology In Iphone Mobiles For 2d Mapping Applications, Nasr Mohammady Saba, Salem Salama Saleh

Journal of Engineering Research

Abstract- LiDAR (Light Detection and Ranging) technology has revolutionized mapping applications, offering enhanced precision and accuracy in spatial data collection. The integration of LiDAR technology in the latest iPhone models, beginning with the iPhone 12 Pro, has introduced new capabilities for 2D data measurement and plan creation directly on the mobile device. The iPhone 12 Pro and 12 Pro Max models support LiDAR techniques within their mobile phone cameras, enhancing the performance of various applications such as Measurements and Photos. LiDAR operates by emitting pulsed light waves into the surrounding space, which bounce off nearby objects and return to the …

Experimental And Numerical Investigation For Optimum Design Of Hydraulic Steel Gates, Basma Hassan Mohamed Eng, Ahmed Mohamed Anwer Dr, Hanan Eltobgy Prof., Gamal Helmy El-Saeed Prof

Journal of Engineering Research

Conventionally, steel gates are widely used in hydraulic structures for their superior mechanical properties in sustaining hydrostatic pressure. Maintenance and operational costs should be considered while studying the feasibility of these gates. In the current research, three prototype steel gates with different configurations were prepared and examined experimentally. The three gates have the same surface dimensions of (width x height) equal to (1.0 x 1.25 m). The first steel gate represents a typical traditional gate made of skin plate and stiffened laterally using standard steel channels and will be kept for comparison. The second gate represents a standard thicker plate …

Performance And Emissions Characteristics Of Multi-Cylinder Direct Injection Diesel Engine Fuelled With Diesel/Biodiesel And Toluene Additives, Hagar Alm-Eldin Bastawissi, Medhat Elkelawy Prof. Dr. Eng., Mohammed Osama Elsamadony Dr. Eng., Moustafa Ghazaly Eng.

Journal of Engineering Research

This study explores the impact of using a diesel, biodiesel, and toluene additive fuel blend in a multi-cylinder direct injection diesel engine, focusing on both performance and emissions characteristics. Biodiesel, made from renewable sources like vegetable oils, is often added to diesel to reduce reliance on fossil fuels and improve combustion due to its higher oxygen content. In this work, a 45% biodiesel blend (B45) led to significant reductions in particulate matter (PM) emissions by up to 40% compared to conventional diesel. Additionally, carbon monoxide (CO) and hydrocarbon (HC) emissions decreased by up to 30% and 25%, respectively, due to …

Effect Of Dual-Fuelled Cng And Gasoline On Spark Ignition Engine Performance And Emissions Behaviors At Different Loads, Medhat Elkelawy Prof. Dr, Eng., M.M. Bassuoni Prof. Dr., Hagar Alm-Eldin Bastawissi, Saied I. Haiba Eng.

Journal of Engineering Research

Engine emissions are one of numerous factors that have detrimentally affected the environment, such as global warming, which is the result of growing exhaust gases, practically carbon dioxide (CO2). These emissions have substantially influenced researchers to develop strategic initiatives to minimize the carbon contents of fuels. The purpose of this research is to investigate the characteristics of internal combustion (SI) engines fueled by gasoline and compressed natural gas (CNG) blends. The experiments are performed using a HONDA 4-stroke, single-cylinder, and air-cooled SI engine. Five CNG concentrations are evaluated, the concentrations range from 0.5 to 2.5 L/min with a 0.5 L/min …

A Quantitative Analysis Of The Commercial-Additive Effects On Diesel Engine Combustion And Emissions Characteristics, Medhat Elkelawy Prof. Dr. Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mahmoud Mohamed Soliman Mahmoud Mohamed Mahmoud Soliman

Journal of Engineering Research

Petroleum fuel prices fluctuate in response to global political and economic issues. Government regulations should be followed when it comes to engine emissions, as these dangerous pollutants have a negative impact on the environment. One such effect is global warming, which raises global temperatures. The purpose of this study is to develop the additives for use as a fuel mix with diesel fuel, which will be used to feed the diesel engine of a single cylinder, four strokes. The engine will be tested experimentally with varying loads at fixed speed of 1500 rpm, using blends of [(5% PRETSONE additive + …