Physical Sciences and Mathematics Commons^™

Ceo_2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang

Journal of Electrochemistry

In this paper,the cerium oxide(CeO2) nanoparticles were electrochemically deposited on a Pt electrode by potentiostatic deposition(psd) and potential pulse deposition(ppd) to form CeO2/Pt composite electrodes,CeO2/Pt(psd) and CeO2/Pt(ppd).The properties of the CeO2 were characterized by field emission scanning electron microscope(FESEM) and X-ray diffraction(XRD).The results showed that the CeO2 nanoparticles prepared by psd and ppd were homogeneous and dense.The methanol oxidation reaction(MOR) and oxygen reduction reaction(ORR) on the Pt electrode were enhanced with the introduction of CeO2 into Pt.In addition,the catalytic capability of the CeO2/Pt electrode can be further improved after dissolution of part of CeO2 on the composite electrode in H2SO4.The …

Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang

Journal of Electrochemistry

By using a galvaostatic electrodeposition method in the ZnCl2 solution,the highly oriented ZnO nanorod array films have been successfully prepared on ITO substrate after the pretreatment with ZnO nanoparticles.And they were characterized by scanning electron microscope,X-ray diffraction and transmittance spectra.The results indicated that the ZnO nanorod arrays grew along(001) direction with an orientation perpendicular to the substrate.When the wavelength of incident was over 380 nm,the ZnO nanorod arrays showed high optical transmission of above 95%.Furthermore,the band gap became narrower.

Application Of Self-Assembly Technique In The Process Of Metallized Fabric, Yue-Hui Ma, Wei Wang, Dan Yu, Jin-Xin He

Journal of Electrochemistry

After the pretreatment of nylon fabric by functional chitosan,the self-assembly technique was used in the process of activation before electroless plating to produce the CS-Pd membrane.The nanosized palladium particles with nanoscal have large relative surface and high catalyzed activity.Electromagnetic wave shielding fabric was prepared by electroless plating of Ni-P alloy with the activated fabric.The optimal process condition of CS finishing was given with the orthogonal and single factor experiments.The variation of fabric surface structure was characterized by SPM,SEM.Based on the Schelkunoff theory.The electromagnetic shielding effectiveness comes above 30 dB,which corresponds to shielding 96.0 percent of the electromagnetic wave or more.

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS),Tafel polarization curves and scanning electron microscopy(SEM) were used to study the corrosion inhibition of AZ61 magnesium alloy in 3.5% NaCl medium with tungstate.Results showed that tungstate demonstrates strong inhibition to the corrosion of AZ61 magnesium alloy.At the concentration of 0.01 mol/L,tungstate has a high inhibition efficiency 75.5%.Tungstate is an anodic inhibitor that mainly inhibited the anodic reactions of magnesium alloy through forming a compact protective layer that covered the magnesium alloy surface active sites.

Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang

Journal of Electrochemistry

The effect of the polyethylene glycol(PEG) molecular weight(MW) upon via-hole filling with diameter of 50 μm and aspect ratio of 1 in the acid copper plating solution was studied.The cathodic polarization in copper electroplating bath with PEG of different molecule weights was investigated by linear sweep voltammetry.The surface roughness,crystallography,and the resistivity of copper films were characterized by X-ray diffraction(XRD),atomic force microscopy(AFM) and the four-point probe measurements.The results showed that the polarization on the cathode and the hole-filling capability of electroplating copper bath were increased evidently with an increase of PEG molecular weight from 600 to 8000.When the PEG MW was …

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu

Journal of Electrochemistry

A highly-sensitive and mercury-free method of determining iodate ion in table salt was established based on carboxylic carbon nanotubes modified carbon paste electrode.In 0.1 mol/L NaOH solution,there was a sensitive cathodic stripping peak on voltammograms.The stripping peak potential was-0.52 V when accumulation time of IO-3 at the modified electrode was 60 s and the potential scan rate was 300 mV/s.There was a good liner relationship between the peak current and IO-3 concentration in the range of 8.0×10-10 ～ 5.0×10-8 mol/L and 1.0×10-7 ～ 3.0×10-6 mol/L with the correlation coefficient of 0.999 and 0.998,respectively.The detection limit was 1.0 × 10-11 mol/L.This …

Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang

Journal of Electrochemistry

The electrochemical behavior of paracetamol(PCT) was studied at glassy carbon electrode activated by cyclic voltammetry.In HAc-NaAc buffer solution(pH=4.00),a couple of sensitive redox peaks were recorded about 0.54 V in the cyclic voltammograms.The result indicated that the process was controlled by adsorption and nearly reversible.The reaction electron and proton numbers were estimated,respectively,to be two.Excllent linearity was observed in the correlation between the oxidation peak current and the concentration of PCT in the range of 8.00×10-6～2.00×10-4 mol·L-1.The correlative coefficient was-0.999 18.The detection limit was 6.34×10-6 mol·L-1.This method can be used for the determination of PCT real samples.

Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang

Journal of Electrochemistry

A modified electrode has been constructed by depositing a novel copper(Ⅱ) complex 2biPy(ClO4)4 on the glassy carbon electrode through the method of cyclic voltammetry(CV).It was found that the modified electrode exhibited high electrocatalytic activity toward L-Cysteine oxidation with good reproducibility and high sensitivity.The peak current of semi-derivative linear scan was proportional to the concentration of L-cys in the range of 1×10-6～3×10-4 mol·L-1.The detection limit was 5×10-7 mol·L-1.

Study On The Texturization Of C-Si Wafers By Different Kinds Of Alkaline For Heterojunction Solar Cells, Yu-Hua Dou, Yu-Qin Zhou, Mei-Fang Zhu, Shuang Song, Feng-Zhen Liu, Jin-Long Liu, Zhan-Jun Zhang

Journal of Electrochemistry

The texturization of(100) crystalline silicon(c-Si) wafer was studied by field-emission scanning electron microscope using different kinds of etchant: sodium hydroxide,sodium carbonate and tribasic sodium phosphate.By optimizing the etching parameters,the lowest values of averaged reflectance(Rav) were obtained to be 9.70% for NaOH,9.76% for Na2CO3 and 8.63% for Na3PO4·12H2O,which is comparable to that of the wafer with textured surface covered with an anti-reflection coating of either silicon nitride or thermally grown silicon dioxide.The relation of Rav and surface morphology of textured wafer was analyzed.Moreover,special emphasis was put on the role of isopropyl alcohol(IPA) and sodium bicarbonate for texturization.It is proved that IPA …

Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li

Journal of Electrochemistry

The chloroperoxidase(CPO) was immobilized onto the surface of SWNTs modified electrodes.The electrochemical behaviors of modified electrode have been investigated by cyclic voltammetry.The appearance of a pair of well-defined redox peaks in the CV curve indicated that SWNTs can promote the electron transfer reaction of CPO.The results of cyclic voltammetry in PBS of different pH,from 3~9,showed that the reaction of CPO on the modified electrode was with equal numbers of electron and protein.This readily prepared SWNTs modified electrode showed excellent stability and good catalysis to O2.

Synthesis Of The Lifepo_4 By Co Reduction:Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang

Journal of Electrochemistry

LiFePO4 cathode material was synthesized by CO reducing FePO4 and LiOH precursors.The structure,morphology and electrochemical performances of such LiFePO4 material were characterized by XRD,SEM and charge-discharge tests.It was shown that the particle size of the LiFePO4 synthesized with 5% excess of LiOH in the precursor was about 200 nm.By carbon coating,the LiFePO4 electrode was able to deliver a reversible capacity of 158 mAh·g-1 at 0.1C discharge rate.Temperature-programmed X-ray diffraction was employed to monitor the reaction during the formation of LiFePO4,and Li3Fe2(PO4)3 was found to be an intermediate by analyzing the time-resolved XRD patterns.Kinetic study indicates that nucleation and their growth …

Effect Of Ch_2cl_2 On The Redox Behavior Of Ferrocene In Ionic Liquid Bmimpf6, Wei-Wei Ji, Li-Qun Xu, Dong-Mei Li, Rong Wang, Xia-Qin Wu, Zong-Rang Zhang

Journal of Electrochemistry

The effects of CH2Cl2 on the room temperature redox behaviors of ferrocene in ionic liquid,BmimPF6,were studied by cyclic voltammetry and AC Impedance.The results suggested that the presence of CH2Cl2,accelerated the dissociation of ionic liquid,leading to lower viscosity and larger ionic conductovity,hence,the diffusions of ferrocence in BmimPF6 were enhanced and the peak currents of redox reactions were increased.The changes in the double-layer structure at the electrode interface resulted in larger capacitance,which reduced the electrode recution resistances,accordirgly,the reaction kinetics of ferrocene were enhanced.

Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang

Journal of Electrochemistry

A glucose oxidative electrode(GOD),EC-Pt/CNTs glucose oxidative electrode,was constructed by ethyl cellulose(EC) and Pt/CNTs.The sensitivity of the EC-Pt/CNTs GOD is 0.85 μA/mM in the concentration range of 0～4 mmol/L of glucose.After dipped in PBS(4℃) for 18 days,the activity of the EC-Pt/CNTs GOD can reach 80%.It is promising for the EC-Pt/CNTs GOD to be used to construct glucose biosensor.

The Hydrothermal Synthesis Of Nanoscale Lifepo_4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The cathode materials of nanosiged LiFePO4 were prepared by hydrothermal templating synthesis.The grain sizes and electrochemical performance of LiFePO4 were controlled by surfactant.It was shown that the grain sizes varied from less than a hundred to hundreds nanometers by the SEM images.In the charge/discharge tests,the discharge capacities of the sample as a lithium ion battery were achieved to 150 mAh/g at 0.1C,140 mAh/g at 1C,and 126 mAh/g at 2C,with good cycling performance.

Electrochemical Properties Of Lamg_(11)Zr+Ni Composite, Xin-Chun Yan, Zi-Li Liu, Xin-Bo Liu

Journal of Electrochemistry

Using the LaMg11Zr as the initial alloy,the LaMg11Zr+Ni composite was prepared by mechanical alloying,and the effect of ball-milling time on the amorphous structure of alloy powers was characterized by X-ray diffraction(XRD).The amorphous(LaMg11Zr+Ni) alloy can be obtained after 20 h ball-milling,and has the best electrochemical capacity,electrochemical cycle stability.

Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu

Journal of Electrochemistry

Hydrophilic aluminum oxide is popularly used for heat exchanger of air-condition.Herein,we developed a simple method to prepare superhydrophilic aluminum oxide on the surface of aluminum through single-step electrochemical oxidization.The morphologies and water contact angles on surfaces of alumina fabricated under different electrochemical conditions were investgated.Superhydrophilic surfaces fabricated by this method have good stability and high mechanical strength with water contact angle almost 0°.Coated with low surface energy materials,superhydrophilc alumina will be converted to superhydrophobic.

Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie

Journal of Electrochemistry

Effects of solution pH on the electrochemical behavior of tiron(sodium 4,5-dihydroxy-1,3-benzendisulfonic) couple(on a graphite electrode) were studied by cyclic voltammetry in aqueous solutions.It is shown that at pH<4,tiron exhibited a redox process at a relatively high potential with a good reversibility.A redox flow battery was formed employing tiron as the positive active species and V(III)/V(II) as the negative redox couple.In sulfuric acid medium,the coulombic efficiency of the tiron-V redox flow cell was more than 90% with a good cycle life.The decay in the cycle performance was minimal.Therefore,the feasibility of tiron as active materials for redox flow battery application is demonstrated.

Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang

Journal of Electrochemistry

The Ir/C catalyst with 30%(by mass) Ir was prepared in the CH3CH2OH and H2O binary system.The X-ray diffraction(XRD) data showed that the average sizes of the Ir particles in the Ir/C catalyst was about 2.2 nm.The results of the electrochemical measurements indicated that the electrocatalytic activity of the Ir/C catalyst for the ammonia oxidation in the neutral NaClO4 solution was similar to the Ir catalyst,while electrocatalytic stability was much better than that of the Ir catalyst.Furthermore,the peak current density of the ammonia oxidation at the Ir/C catalyst electrode showed a good linear relationship with the ammonia concentration,illustrating that the Ir/C …

Preparations Of Composite Electrodes Of Pt With H_Xwo_3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li

Journal of Electrochemistry

Three composite electrodes of platinum with hydrogen tungsten bronze(HxWO3)were prepared by voltammetry: hydrogen tungsten bronze deposited on platinum(HxWO3/Pt);platinum deposited on hydrogen tungsten bronze(Pt/HxWO3) and codeposited platinum and hydrogen tungsten bronze(Pt-HxWO3).The eletro-catalytic activities of three electrodes toward oxygen reduction reaction were studied.It is found that the catalytic activity of platinum can be improved by introducing with hydrogen tungsten bronze.Among these composite electrodes Pt/HxWO3,and the electrode shows the best eletro-catalytic activity toward oxygen reduction reaction,hence,provides a new way for reducing loading of noble metal in the application for fuel cell.

Comparison Of Three Models For Predicting Gross Primary Production Across And Within Forested Ecoregions In The Contiguous United States, Nicholas C. Coops, Colin J. Ferster, Richard H. Waring, Joanne Nightingale

United States National Aeronautics and Space Administration: Publications

Gross primary production (GPP), the photosynthetic uptake of carbon, is an important variable in the global carbon cycle. Although continuous measurements of GPP are being collected from a network of micrometeorological towers, each site represents a small area with records available for only a limited period. As a result, GPP is commonly modeled over forested landscapes as a function of climatic and soil variables, often supplemented with satellite-derived estimates of the vegetation's light-absorbing properties. Since the late 1990s, a number of models have been developed to provide seasonal and annual estimates of GPP across much of the Earth. Each model, …

Dynamics Of Quasiconformal Fields, Tadeusz Iwaniec, Leonid V. Kovalev, Jani Onninen

Mathematics - All Scholarship

A uniqueness theorem is established for autonomous systems of ODEs, x= f(x), where f is a Sobolev vector field with additional geometric structure, such as delta-monoticity or reduced quasiconformality. Specifically, through every non-critical point of f there passes a unique integral curve.

Photoluminescence Of 1-D Copper(I) Cyanide Chains: A Theoretical Description, Craig A. Bayse, Timothy P. Brewster, Robert D. Pike

Arts & Sciences Articles

Solid copper(I) cyanide occurs as extended one-dimensional chains with interesting photophysical properties. To explain the observed luminescence spectroscopy of CuCN, we report a series of computational studies using short bare and potassium-capped [Cun(CN)n+1] − (n = 1, 2, 3, 4, 5, and 7) chains as CuCN models. On the basis of TD-DFT calculations of these model chains, the excitation transitions in the UV spectrum are assigned as Laporte-allowed π−π transitions from MOs with Cu 3dπ and CN π character to empty MOs with Cu 4p and CN π* character. Transitions between the HOMO (3dz …

Adhesion And Interfacial Fracture Toughness Between Hard And Soft Materials, Nima Rahbar, Kurt Wolf, Argjenta Orana, Roy Fennimore, Zong Zong, Juan Meng, George Papandreou, Cynthia Maryanoff, Wole Soboyejo

Nima Rahbar

This paper presents the results of a combined experimental and theoretical study of adhesion between hard and soft layers that are relevant to medical devices such as drug-eluting stents and semiconductor applications. Brazil disk specimens were used to measure the interfacial fracture energies between model parylene C and 316L stainless steel over a wide range of mode mixities. The trends in the overall fracture energies are predicted using a combination of adhesion theories and fracture mechanics concepts. The measured interfacial fracture energies are shown to be in good agreement with the predictions.

Cycles In Metabolic Networks, Tim Nunamaker

Computer Science Honors Theses

Modeling sophisticated biological systems in a way that makes them more apprehensible, without losing comprehension or robustness, is challenging task. The flux balance analysis FBA) model describes metabolic networks of single-celled organisms with the goal of simulating their steady-state behavior. FBA simulations yield reliable and biologically relevant growth rate values, but do not simulate intra-cellular behavior well.

Solutions to the FBA model are often degenerate and non-unique. Ideally, the model should simulate metabolic activity in exactly one way under any given circumstances--the way the real organism's metabolism behaves. The ultimate goal of this project is to better understand the FBA …

Molecular Hydrogen Formation On Low Temperature Surfaces In Temperature Programmed Desorption Experiments, Gianfranco Vidali, Ling Li, J. Roser, E. Congiu

Physics - All Scholarship

The study of the formation of molecular hydrogen on low temperature surfaces is of interest both because it allows to explore elementary steps in the heterogeneous catalysis of a simple molecule and because of the applications in astrochemistry. Here we report results of experiments of molecular hydrogen formation on amorphous silicate surfaces using temperature-programmed desorption (TPD). In these experiments beams of H and D atoms are irradiated on the surface of an amorphous silicate sample. The desorption rate of HD molecules is monitored using a mass spectrometer during a subsequent TPD run. The results are analyzed using rate equations and …

Transformation Groups And Duality In The Analysis Of Musical Structure, Janine Du Plessis

Mathematics Theses

One goal of music theory is to describe the resources of a pitch system. Traditionally, the study of pitch intervals was done using frequency ratios of the powers of small integers. Modern mathematical music theory offers an independent way of understanding the pitch system by considering intervals as transformations. This thesis takes advantage of the historical emergence of algebraic structures in musicology and, in the spirit of transformational theory, treats operations that form mathematical groups. Aspects of Neo-Riemannian theory are explored and developed, in particular the T/I and PLR groups as dual. Pitch class spaces, such as 12, can also …

Tidal Heating Of Terrestrial Extrasolar Planets And Implications For Their Habitability, Brian Jackson, Rory Barnes, Richard Greenberg

Brian Jackson

The tidal heating of hypothetical rocky (or terrestrial) extrasolar planets spans a wide range of values depending on stellar masses and initial orbits. Tidal heating may be sufficiently large (in many cases, in excess of radiogenic heating) and long-lived to drive plate tectonics, similar to the Earth's, which may enhance the planet's habitability. In other cases, excessive tidal heating may result in Io-like planets with violent volcanism, probably rendering them unsuitable for life. On water-rich planets, tidal heating may generate subsurface oceans analogous to Europa's with similar prospects for habitability. Tidal heating may enhance the outgassing of volatiles, contributing to …

Parameters Of Pseudorandom Quantum Circuits, Yaakov S. Weinstein, Winton G. Brown, Lorenza Viola

Dartmouth Scholarship

Pseudorandom circuits generate quantum states and unitary operators which are approximately distributed according to the unitarily invariant Haar measure. We explore how several design parameters affect the efficiency of pseudorandom circuits, with the goal of identifying relevant tradeoffs and optimizing convergence. The parameters we explore include the choice of single- and two-qubit gates, the topology of the underlying physical qubit architecture, the probabilistic application of two-qubit gates, as well as circuit size, initialization, and the effect of control constraints. Building on the equivalence between pseudorandom circuits and approximate t-designs, a Markov matrix approach is employed to analyze asymptotic convergence properties …

Examination Of Initialization Techniques For Nonnegative Matrix Factorization, John Frederic

Mathematics Theses

While much research has been done regarding different Nonnegative Matrix Factorization (NMF) algorithms, less time has been spent looking at initialization techniques. In this thesis, four different initializations are considered. After a brief discussion of NMF, the four initializations are described and each one is independently examined, followed by a comparison of the techniques. Next, each initialization's performance is investigated with respect to the changes in the size of the data set. Finally, a method by which smaller data sets may be used to determine how to treat larger data sets is examined.

Factorization Of Quasiseparable Matrices, Paul D. Johnson

Mathematics Theses

This paper investigates some of the ideas and algorithms developed for exploiting the structure of quasiseparable matrices. The case of purely scalar generators is considered initially. The process by which a quasiseparable matrix is represented as the product of matrices comprised of its generators is explained. This is done clearly in the scalar case, but may be extended to block generators. The complete factoring approach is then considered. This consists of two stages: inner-outer factorization followed by inner-coprime factorization. Finally, the stability of the algorithm is investigated. The algorithm is used to factor various quasiseparable matrices R created first using …