VLSI and Circuits, Embedded and Hardware Systems Commons^™

Design And Fabrication Of A Microstrip Bandpass Filter In Ltcc, Allison Rucker

Electrical Engineering Undergraduate Honors Theses

The goal of the project was to design and fabricate a bandpass filter with a center frequency of 25GHz with a 2GHz bandwidth. The first step was to do the calculation to design a bandpass filter to meet these specifications along with the properties of the Dupont^TM GreenTape^TM 9K7. HFSS was then used to verify the results from the initial calculations. There was a significant error between the two results, so more tweaking was done to the calculations to get a better center frequency. After a final design was decided, the fabrication process started. Low-Temperature Co-Fired Ceramics (LLTC) …

Improvement Of Stability Of A Grid-Connected Inverter With An Lcl Filter By Robust Strong Active Damping And Model Predictive Control, Seungyong Lee

Graduate Theses and Dissertations

This study addresses development and implementation of robust control methods for a three-phase grid-connected voltage source inverter (VSI) accompanied by an inductive-capacitive-inductive (LCL) filter. A challenge of current control for the VSI is LCL filter resonance near to the control stability boundary, which interacts with the inverter control switching actions and creates the possibility of instability. In general, active damping is needed to stabilize the system and ensure robust performance in steady-state and dynamic responses. While many active damping methods have been proposed to resolve this issue, capacitor-current-feedback active damping has been most widely used for its simple implementation.

There …

Enercon Station Vacuum Pump Replacement, Clint Hembree, Jared D'Amico, Connor Moore, Paul Jeffrey Fontenot, Sydnee Castello, J.J. Clements

Senior Design Project For Engineers

This details the progress of the ENERCON pump replacement project as completed by the Kennesaw State University interdisciplinary senior design group. This project is a two-semester capstone effort for the engineering program at Southern Polytechnic School of Engineering, overseen by Dr. McFall during Fall 2020 and Dr. Khalid during Spring 2021 semesters. The 2020-2021 KSU Interdisciplinary Senior Design team was tasked with completing an Engineering Change Package (ECP) for existing vacuum pumps at ENERCON Station. The mechanical, electrical, and civil students worked together, performing evaluations on existing plant systems to ensure the plant could support the new vacuum pumps. By …

Comparing Noise Mechanisms & Entropy In Tent-Map Circuits, Austin Powell Davis

Honors Capstone Projects and Theses

No abstract provided.

Side Channel Attack Counter Measure Using A Moving Target Architecture, Jithin Joseph

Electrical and Computer Engineering ETDs

A novel countermeasure to side-channel power analysis attacks called Side-channel Power analysis Resistance for Encryption Algorithms using DPR or SPREAD is investigated in this thesis. The countermeasure leverages a strategy that is best characterized as a moving target architecture. Modern field programmable gate arrays (FPGA) architectures provide support for dynamic partial reconfiguration (DPR), a feature that allows real-time reconfiguration of the programmable logic (PL). The moving target architecture proposed in this work leverages DPR to implement a power analysis countermeasure to side-channel attacks, the most common of which are referred to as differential power analysis (DPA) and correlation power analysis …

A Bibliometric Survey On Antipodal Vivaldi Antenna, Sumit Kumar, Amruta S. Dixit

Library Philosophy and Practice (e-journal)

In this paper bibliometric survey is presented on Antipodal Vivaldi Antenna. The Antipodal Vivaldi Antenna is a broad band and has symmetric E plane and H plane. It has been used extensively in radars, wireless communication and dual polarization applications. The antipodal Vivaldi antenna has significant researches in biomedical imaging, optical lens, Ground-Penetrating Radar (GPR) System, detecting cancer, 5G communications etc. The bibliometric analysis is done for the reason to understand the reach of antipodal Vivaldi antenna and performance enhancement analysis worldwide. The Scopus and web of science are used for accomplishing this survey. The study focuses on 449 documents …

Metamaterials In 5g Antenna Designs: A Bibliometric Survey, Hema D. Raut, Laxmikant K. Shevada, Rajeshwari R. Malekar, Amruta S. Dixit, Sumit Kumar

Library Philosophy and Practice (e-journal)

The demand of high gain and wideband compact antenna designs are gaining importance to fulfil the need of 5G communication systems. This has opened the doors for the researchers to explore 5G antennas incorporating metamaterials as they can meet the requirement of high gain and wideband compact antennas. Overview of various metamaterial-based antenna designs including Electromagnetic Band Gap (EBG), artificial Magnetic Conductor (AMC), Frequency Selective Surface (FSS) and Partially Reflective Surface (PRS) are discussed in the paper. The paper primarily focuses on bibliometric survey of various types of 5G metamaterial antennas in terms of number of documents published, leading universities …

Design Of An Ultra-Wideband Frequency-Modulated Continuous Wave Short Range Radar System For Extending Independent Living, Toai-Chi Nguyen

Master's Theses

Falls in the disabled and elderly people have been a cause of concern as they can be immobilized by the fall and have no way to contact others and seek assistance. The proposed frequency modulated continuous wave (FMCW) short range radar (SRR) system, which uses ultra-wideband (UWB) signals can provide immediate assistance by monitoring and detecting fall events. The unique characteristics of this system allow for a frequency-based modulation system to carry out triangulation and sense the location of the fall through the usage of a continuous chirp signal that linearly sweeps frequency. This project focuses on the development, design …

Verifying Spi With Universal Verification Methodology (Uvm), Yueting Zhao

Discovery Undergraduate Interdisciplinary Research Internship

Nowadays, system-on-chips (SoC) are widely applied to perform any computing task. They are used in personal computers, embedded systems, and mobile computing. During the design of an SoC, testing and debugging play important roles to ensure the correct functionalities before sending the chip for fabrication. There are several different verification methods, among which the Universal Verification Methodology (UVM) is the one we are using. It is written in SystemVerilog and is an efficient method for verifying digital designs that is standardized in the industry. Following UVM, we can create scalable and well-formatted testbenches that can be reused for other components …

Logical Modeling Of Adiabatic Logic Circuits Using Vhdl, Lee Belfore

Electrical & Computer Engineering Faculty Publications

The underlying nature of adiabatic circuits is most accurately characterized at the circuit level as it is for traditional technologies. In order to scale system designs for adiabatic logic technologies, modeling of adiabatic circuits at the logic level is necessary. Logic level models of adiabatic logic circuits can facilitate the design, development, and verification of large scale digital systems that may be infeasible using circuit simulators. Adiabatic logic circuits can be powered with a four stage power clock consisting of idle, charge, hold, and recover stages that provides for adiabatic charging and charge recovery to give adiabatic circuits their low …

Hard Hat Ambient Liability Observer (Halo), Hunter Hykes, Nathan Kish, Brian Thomson

Williams Honors College, Honors Research Projects

Capturing workplace incident information is a growing area of concern for most companies. To assist with this, the design team proposed the H.A.L.O. This design uses time-of-flight sensors connected to LEDs to create a proximity-based hazard warning system. It also records incident data using an accelerometer and micro-SD card. This helps workers avoid some of the most common workplace injuries, slips, trips, and falls and accidental collisions.

Students have created a design with engineering, and marketing requirements that accomplish this task. The proposed design allows for this monitoring and mitigation systems to be attached to hard hats. Team members developed …

Design Project: Smart Headband, John Michel, Jack Durkin, Noah Lewis

Williams Honors College, Honors Research Projects

Concussion in sports is a prevalent medical issue. It can be difficult for medical professionals to diagnose concussions. With the fast pace nature of many sports, and the damaging effects of concussions, it is important that any concussion risks are assessed immediately. There is a growing trend of wearable technology that collects data such as steps and provides the wearer with in-depth information regarding their performance. The Smart Headband project created a wearable that can record impact data and provide the wearer with a detailed analysis on their risk of sustaining a concussion. The Smart Headband uses accelerometers and gyroscopes …

Automated Blind Control, Daniel Nahra, Matthew Lacek, Timothy Kurczewski, William Daulton Baksa

Williams Honors College, Honors Research Projects

The objective of this project would be to design and prototype an automated, light and temperature sensing window blinds system. The device would detect temperature, both inside and outside, and incoming sunlight to determine proper window blind position for maximum energy savings. The user would also have the ability to change the settings of the blind from a remote device to a setting that they desire at any given time

Soil Sensor Network, Andrea Wyder, Ross Klonowski, Alexis Alves, Luke Farnsworth

Williams Honors College, Honors Research Projects

Water management during crop irrigation is a problem for the agricultural industry. To help farmers better maintain water usage, a wireless soil sensor network comprised of a sensor pod and wireless communication has been designed and implemented. It was proven that the sensor pod can be installed 6-8 inches below the ground and communicate up to at least a 6km distance back to the gateway. The senor pod shells have a 2 mm thick shell to prevent the pod from shattering when coming into contact with the ground after being released from the planter, as calculated through the force of …

Smart Doggy Door, Jaret Helminski, Brandon Caldwell, Jason Marcum, Nathaniel Hall

Williams Honors College, Honors Research Projects

The smart doggy door is an engineering senior design project which will be completed in the spring of 2021. The goal of this project is to design and implement a dog door that can detect when a dog is near. After that it will determine if the dog is allowed to use the door and it will then open if the dog is allowed to go through the door. This device will also send a notification to the dogs owner via an app on their phone. This device will allow dog owners to keep unwanted animals out as well as …

Combining Approximate Computing And Adiabatic Logic For Low-Power And Energy-Efficient Iot Edge Computing, Wu Yang

Theses and Dissertations--Electrical and Computer Engineering

The growing data-intensive applications that run on IoT edge devices require the circuit to be low-power consumption and energy-efficient for limited resources. As conventional Complementary Metal-Oxide-Semiconductor (CMOS) scales down to the nanometer technology node, it reaches its limits, such as leakage and power consumption. Adiabatic logic and approximate computing are emerging techniques for the low-power circuit. Adiabatic logic can recycle energy which is a promising solution for building energy-efficient circuits. However, the power clock scheme and dual-rail structure of adiabatic logic increase the overall area. Power consumption is further reduced by applying approximate computing while reducing the complexity and size …

Designing Novel Hardware Security Primitives For Smart Computing Devices, Amitkumar Degada

Theses and Dissertations--Electrical and Computer Engineering

Smart computing devices are miniaturized electronics devices that can sense their surroundings, communicate, and share information autonomously with other devices to work cohesively. Smart devices have played a major role in improving quality of the life and boosting the global economy. They are ubiquitously present, smart home, smart city, smart girds, industry, healthcare, controlling the hazardous environment, and military, etc. However, we have witnessed an exponential rise in potential threat vectors and physical attacks in recent years. The conventional software-based security approaches are not suitable in the smart computing device, therefore, hardware-enabled security solutions have emerged as an attractive choice. …

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Fractional Order Identification Method And Control: Development Of Control For Non-Minimum Phase Fractional Order System, Majid Abdullah Alhomim

Graduate Theses and Dissertations

The increasing use of renewable energy has resulted in the need for improved a dc-dc converters. This type of electronic-based equipment is needed to interface the dc voltages normally encountered with solar arrays and battery systems to voltage levels suitable for connecting three phase inverters to distribution level networks. As grid-connected solar power levels continue to increase, there is a corresponding need for improved modeling and control of power electronic converters. In particular, higher levels of boost ratios are needed to connect low voltage circuits (less than 1000 V) to medium voltage levels in the range of 13 kV to …

Resistive Switching In Fto/Cuo-Cu2o/Au Memory Devices, Amir Shariffar, Haider Salman, Tanveer A. Siddique, Wafaa Gebril, M. Omar Manasreh

Electrical Engineering Faculty Publications and Presentations

Memristors are considered to be next-generation non-volatile memory devices owing to their fast switching and low power consumption. Metal oxide memristors have been extensively investigated and reported to be promising devices, although they still suffer from poor stability and laborious fabrication process. Herein, we report a stable and power-efficient memristor with novel heterogenous electrodes structure and facile fabrication based on CuO-Cu2O complex thin films. The proposed structure of the memristor contains an active complex layer of cupric oxide (CuO) and cuprous oxide (Cu2O) sandwiched between fluorine-doped tin oxide (FTO) and gold (Au) electrodes. The fabricated memristors demonstrate bipolar resistive switching …

A 2.56 Gbps Serial Wireline Transceiver That Supports An Auxiliary Channel And A Hybrid Line Driver To Compensate Large Channel Loss, Xiaoran Wang

Electrical Engineering Theses and Dissertations

Serial transceiver links are widely used for high-speed point-to-point communications. This dissertation describes two transceiver link designs for two different applications.

In serial wireline communications, security is an increasingly important factor to concern. Securing an information processing system at the application and system software layers is regarded as a necessary but incomplete defense against the cyber security threats. In this dissertation, an asynchronous serial transceiver that is capable of transmitting and receiving an auxiliary data stream concurrently with the primary data stream is described. The transceiver instantiates the auxiliary data stream by modulating the phase of the primary data without …

Signals And Systems, Jingxian Wu

Open Educational Resources

Signals and Systems is a core Electrical Engineering undergraduate course. This course covers the topics of signal and system analysis, with an emphasis on the analysis of linear time-invariant systems. The materials presented in this course are designed for a 15-week course for junior or senior level students. The open access materials for this course include:

Course outline and guides: a detailed guideline that provides a week-by-week teaching schedule for a 15-week semester.

Lecture notes: a complete set of lecture notes with detailed explanations and a large number of examples that cover all the contents that are offered in this …

Low-Power Cmos Cross-Coupled Differential-Drive Rectifier For Ambient Radio Frequency Energy Harvesting Systems, Sing Leung Gabriel Chong

Student Works (2020-2029)

Wireless Sensor Node (WSN) for the Internet of Things (IoT) and Internet of Everything (IoE) will require harvesting low-power ambient Radio Frequency (RF) energy to achieve self-power capabilities, alleviating the need of batteries. The research title of “Low-Power CMOS Cross-Coupled Differential-Drive Rectifier for Ambient Radio Frequency Energy Harvesting Systems” relates to the design of integrated circuit (IC) rectifiers for low-power ambient RF energy harvesting (RFEH) in complementary-metal-oxide-semiconductor (CMOS) technology. The adoption of CMOS for the rectifier designs is to achieve small physical form factor, low-cost, and system-on-chip (SoC) integration. The rectifier is the main circuit in an ambient RFEH system …

Data Processing Electronics For An Ultra-Fast Single-Photon Counting Camera, Jackson Hyde

McKelvey School of Engineering Graduate Student Theses & Dissertations

Localizing photon arrivals with high spatial (megapixel) and temporal (sub-nanosecond) resolution would be transformative for a number of applications, including single-molecule super-resolution fluorescence microscopy. Here, the Data Processing Field Programmable Gate Array (FPGA) is developed as an ultra-fast computational platform built on an FPGA for a microchannel plate (MCP)-photomultiplier tube (PMT) based single-photon counting camera. Each photon is converted by the MCP-PMT into an electron cloud that generates current pulses across a 50×50 cross-strip anode. The Data Processing FPGA executes a massively parallel center-of-gravity coordinate determination algorithm on the digitized current pulses to determine a 2D position and time of …

Investigating Single Precision Floating General Matrix Multiply In Heterogeneous Hardware, Steven Harris

McKelvey School of Engineering Graduate Student Theses & Dissertations

The fundamental operation of matrix multiplication is ubiquitous across a myriad of disciplines. Yet, the identification of new optimizations for matrix multiplication remains relevant for emerging hardware architectures and heterogeneous systems. Frameworks such as OpenCL enable computation orchestration on existing systems, and its availability using the Intel High Level Synthesis compiler allows users to architect new designs for reconfigurable hardware using C/C++. Using the HARPv2 as a vehicle for exploration, we investigate the utility of several of the most notable matrix multiplication optimizations to better understand the performance portability of OpenCL and the implications for such optimizations on this and …

Device-Level Predictive Modeling Of Extreme Electromagnetic Interference, Nishchay H. Sule

Electrical and Computer Engineering ETDs

Radio Frequency (RF) interference is a prominent issue for modern electronic devices. As device size and supply power shrink to meet the on-going demand for compact and complex Integrated Circuits (ICs), their susceptibility to external noise coupling to the input or power supply increases significantly. One such type of noise that acts upon a system to be considered is Extreme Electromagnetic Interference (EEMI). Previous works done to understand and evaluate the impact of EEMI onto a system or sub-system have been conducted on a statistical or empirical analysis level, which has led to complex and convoluted analysis, that requires significant …

Design Of Control System With Feedback Loop For A Pulsatile Pump, Ian Scott Sanders

Graduate Theses and Dissertations

This paper describes the design and implementation of a closed-loop proportional, integral, differential (PID) control system for a custom in-house pulsatile pump apparatus for the University of Arkansas Biomedical Department. The control system is designed to control a MOONS’ PL34HD0L8500 hybrid stepper motor using a dual H-bridge motor driver network with four pulse-width modulated (PWM) inputs to drive a pulsatile pump apparatus at motor stepping frequencies up to 2kHz. The speed of the motor is controlled from a pressure profile transmitted from an external source over RS-232 communication that specifies the motor speed, number of datapoints, and an array of …

Polyone Smartphone, Joshua Zalmanowitz, Chi Nguyen, Gerome Cacho, Chris Lim

Electrical Engineering

The Poly One Smartphone is a student designed smartphone built to explore the implementation of 5G, provide a hardware solution to ensure personal information security and privacy, and provide longer battery life. The key features of this smartphone include but are not limited to a main cpu, some form of network connectivity in the form of Wi-fi or Cellular Data, calling functionality, a rechargeable battery that works with common power connection protocols, and compatibility with popular applications.

Side-Channel Power Resistance For Encryption Algorithms Using Implementation Diversity, Ivan M. Bow

Electrical and Computer Engineering ETDs

This thesis paper investigates countermeasures to hardware side-channel attacks and proposes a new solution to this ever growing threat against data integrity and security. The side-channel attack methods, differential power analysis and correlation power analysis, are both very powerful techniques and are used to gain access to secrets inside of a field programmable gate array that are otherwise inaccessible, in particular the cryptographic key for the Advanced Encryption Standard algorithm. To counter these attacks, we propose a method of changing the internal hardware configuration of the field programmable gate array using dynamic partial reconfiguration. Using this method, we change the …

Built-In Self-Test (Bist) For Multi-Threshold Null Convention Logic (Mtncl) Circuits, Brett Sparkman

Graduate Theses and Dissertations

This dissertation proposes a Built-In Self-Test (BIST) hardware implementation for Multi-Threshold NULL Convention Logic (MTNCL) circuits. Two different methods are proposed: an area-optimized topology that requires minimal area overhead, and a test-performance-optimized topology that utilizes parallelism and internal hardware to reduce the overall test time through additional controllability points. Furthermore, an automated software flow is proposed to insert, simulate, and analyze an input MTNCL netlist to obtain a desired fault coverage, if possible, through iterative digital and fault simulations. The proposed automated flow is capable of producing both area-optimized and test-performance-optimized BIST circuits and scripts for digital and fault simulation …