VLSI and Circuits, Embedded and Hardware Systems Commons^™

Design And Parametric Testing Of A Transimpedance Amplifier For Low-Power Biomedical Applications, Stanlon Tan, William Chung, Brandon Wu

Electrical Engineering

This project developed and evaluated an optical sensing system for detecting changes associated with glucose concentration. The system combined a laser-diode, cuvette sample holder, photodiode, resistive-feedback transimpedance amplifier, high-resolution analog-to-digital converter, and microcontroller. Parametric testing evaluated the effects of input current and feedback resistance on transimpedance gain, output range, and linearity. Firmware was developed to configure the ADC, average repeated conversions, monitor measurement variation, convert raw digital counts into voltage using a source-meter calibration equation, and compare sample measurements with a water reference. A cuvette enclosure maintained alignment between the laser-diode, sample, and photodiode while reducing external optical interference. Testing …

Dot Product Engine Based Neuromorphic Hardware For Continuous-Time Biomedical Signal Classification, Sanjeev Srinivasan

Master's Theses

Accurate diagnosis of pathological conditions from biomedical signals, such as electrocardiograms (ECGs) is often performed offline, making it time-consuming, costly, and inefficient, especially when abnormal patterns are rare and long-term monitoring generates large amounts of data. To address this, this work proposes a compact, scalable, and programmable neuromorphic system designed for real-time preliminary arrhythmia detection and classification using ECG signals, that can be extended to other biomedical signals. The proposed design processes ECG signals using a delta modulation-based spike encoder, followed by classification with a dot-product engine (DPE) based spiking neural network (SNN) processor and winner-take-all (WTA) circuit. The architecture …

Hypoxic Incubator: Improving Robustness/Reliability And Demonstrating Physiological Efficacy, Damon Dennis Tan

Master's Theses

The Microphysiological Systems Laboratory aims to develop colorectal cancer tumor models under a hypoxic environment to assess model response to pharmaceutical compounds in vitro. To perform relevant studies, researchers have attempted to use different hypoxic inducing strategies such as a nitrogen pod and hypoxic incubator to recreate in vivo physiological responses to hypoxia. However, studies would be interrupted due to incubator functionality failure. To ensure successful and physiologically relevant studies, I improved and verified the robustness and reliability of a hypoxic incubator previously designed and manufactured in the lab. Through the testing and iterating design processes, I engineered and implemented …

Towards A Wearable Device For Measuring Impedance Plethysmography Of The Radial Artery, Pritom Chowdhury

Dartmouth College Master’s Theses

Recent advancements in bioimpedance technology have demonstrated significant promise in the application of cardiac health monitoring. This research explores the design and development of a forearm-based wearable bioimpedance device for non-invasive measurement of heart rate and respiratory rate at an accuracy level comparable to medical-grade monitors. It utilizes a tetrapolar electrode configuration to analyze bioimpedance changes in the radial artery due to blood flow.

An ongoing aspect of this work involves the preliminary development of an embedded framework intended to integrate signal generation, acquisition, and processing within the device to achieve compact and efficient system design, anticipated to contribute to …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Embedding A Grid Of Load Cells Into A Dining Table For Automatic Monitoring And Detection Of Eating Events, Mohammad Mayyan

All Dissertations

This dissertation describes a “smart dining table” that can detect and measure consumption events. This work is motivated by the growing problem of obesity, which is a global problem and an epidemic in the United States and Europe. Chapter 1 gives a background on the economic burden of obesity and its comorbidities. For the assessment of obesity, we briefly describe the classic dietary assessment tools and discuss their drawback and the necessity of using more objective, accurate, low-cost, and in-situ automatic dietary assessment tools. We explain in short various technologies used for automatic dietary assessment such as acoustic-, motion-, or …

The Design Of Cmos Front-End Amplifiers For Electrical Impedance Applications, Yueh-Ching Teng

Dartmouth College Ph.D Dissertations

Electrical Impedance Tomography (EIT) is a medical imaging methodology that does not need any kind of ionizing radiation. It is significantly cheaper and smaller than Computerized Tomography (CT) or Magnetic Resonance Imaging (MRI). These advantages make EIT particularly suitable for emerging applications like the continuous medical imaging and telemonitoring of organ function. Current bench-top EIT systems are bulky and require shielded cables to interface with measurement electrodes. The cable introduces parasitic capacitances which shunt the desired signals and degrade the accuracy of the measurements. A EIT system based on application-specific integrated circuits (ASICs) can reduce the parasitic and stray capacitance …

Creating Reel Designs: Reflecting On Arthrogryposis Multiplex Congenita In The Community, Iris Layadi

Purdue Journal of Service-Learning and International Engagement

Because of its extreme rarity, the genetic disease arthrogryposis multiplex congenita (AMC) and the needs of individuals with the diagnosis are often overlooked. AMC refers to the development of nonprogressive contractures in disparate areas of the body and is characterized by decreased flexibility in joints, muscle atrophy, and developmental delays. Colton Darst, a seven-year-old boy from Indianapolis, Indiana, was born with the disorder, and since then, he has undergone numerous surgical interventions and continues to receive orthopedic therapy to reduce his physical limitations. His parents, Michael and Amber Darst, have hopes for him to regain his limbic motion and are …

An Electrooculography Prosthetic Control System, Walker Arce

UNO Student Research and Creative Activity Fair

For many surface EMG (sEMG) prosthetic control systems, the muscles on the affected limb are used to trigger the control system. This can lead to fatigue in the user as they have to maintain continuous muscle activation and coactivation in order to achieve prosthetic control [3]. The crux of any prosthetic control system is the human machine interface that is developed, and at present many control systems have complicated interfaces that limit the degrees of freedom of the prosthetics. This study focuses on the development of a low-cost prosthetic control peripheral that is compatible with the prosthetics developed by Dr. …

Detecting Suicide Risk From Wristworn Activity Tracker Data Using Machine Learning Approaches, Pallavi Atluri

Electrical Engineering Theses

Suicide is a prevalent cause of death worldwide and depression is a primary concern of many suicidal acts. It is possible that an individual during depression never has any suicidal thoughts at all. On the other hand, some individuals in stable condition with no apparent symptoms of depression feel urges to commit suicide (suicidal ideation). Many such individuals never let anyone know what they are feeling or planning. Suicidal ideation considered an important precursor to suicidal acts.

Detecting the suicide risk in individuals with mood disorders is a major challenge. The current clinical practice to assess suicide risk in these …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

A Stroke Therapy Brace Design, Evan Kirkbride

Electrical Engineering

Victims of stroke often have difficulty with rehabilitation. With limited movement on their affected arm, patients often do not want to move much for physical therapy. In this project, we design a robotic brace that helps stroke patients move their arm more effectively in a reaching or pulling motion. By giving patients more movement in their affected arm than they would have otherwise, patients gain more from rehabilitation. The brace also adapts to the patient’s needs, providing more inclination or resistance as needed for their physical therapy. This kind of therapy engages patients rather than relying on their likely dwindled …

Design Of An Assistive Technology Adaptive Switch Using An Inertial Measurement Unit, Ethan Storm Williams

Graduate Theses and Dissertations

A new assistive technology switch for people with disabilities was developed utilizing an Inertial Measurement Unit (IMU) as the sensor technology. The hardware can be customized through firmware to provide custom switch activations on a person by person basis. The firmware is customized to recognize specific data features in the IMU data which identify the desired switch activation movement performed by the user. In this way, the switch can be adapted to activate based on the movements of the user. During this research, the generic hardware platform, including the IMU sensor technology and Bluetooth communications, was designed and tested. An …

Design And Fabrication Techniques Of Devices For Embedded Power Active Contact Lens, Errol Heradio Leon

Master's Theses

This thesis designed and fabricated various devices that were interfaced to an IC for an active contact lens that notifies the user of an event by detection of an external wireless signal. The contact lens consisted of an embedded antenna providing communication with a 2.4GHz system, as well as inductive charging at an operating frequency of 13.56 MHz. The lens utilized a CBC005 5µAh thin film battery by Cymbet and a manufactured graphene super capacitor as a power source. The custom integrated circuit (IC) was designed using the On Semiconductor CMOS C5 0.6 µm process to manage …

Low Power Data Acquisition For Microimplant Biometric Monitoring Of Tremors, Tania Khanna '01

Doctoral Dissertations

In recent years, trends in the medical industry have created a growing demand for implantable medical devices. In particular, the need to provide doctors a means to continuously monitor biometrics over long time scales with increased precision is paramount to efficient healthcare. To make medical implants more attractive, there is a need to reduce their size and power consumption. Small medical implants would allow for less invasive procedures, greater comfort for patients, and increased patient compliance. Reductions in power consumption translate to longer battery life. The two primary limitations to the size of small medical implants are the batteries that …

Control System For Glucose Detector System, David Smith

Electrical Engineering

In this paper I design and test on a prove of concept level a control/timing circuit for a blood glucose detector built in a previous senior project. The specifications of the design given are to properly power the detector with a low power source. The design is completed on a transistor level basis using Cadence Virtuoso Software. The system is design from the ground up; designing, building, and testing smaller circuits first then combined into increasingly larger circuits till the completed circuit is finished. The design used to based off of the 555 Timer and uses differential pairs, CMOS designed …