VLSI and Circuits, Embedded and Hardware Systems Commons^™

Gen-Acceleration: Pioneering Work For Hardware Accelerator Generation Using Large Language Models, Durga Lakshmi Venkata Deepak Vungarala

Theses

Optimizing computational power is critical in the age of data-intensive applications and Artificial Intelligence (AI)/Machine Learning (ML). While facing challenging bottlenecks, conventional Von-Neumann architecture with implementing such huge tasks looks seemingly impossible. Hardware Accelerators are critical in efficiently deploying these technologies and have been vastly explored in edge devices. This study explores a state-of-the-art hardware accelerator; Gemmini is studied; we leveraged the open-sourced tool. Furthermore, we developed a Hardware Accelerator in the study we compared with the Non-Von-Neumann architecture. Gemmini is renowned for efficient matrix multiplication, but configuring it for specific tasks requires manual effort and expertise. We propose implementing …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Electronic Note-String Detector, Gavin Garcia-Rossi, Tommy Smail

Electrical Engineering

As the virtual space has become a dominant part of everyone’s day-to-day lives, many normal face-to-face interactions and services have not yet been facilitated by adapting technology. One of these prevailing areas is music lessons. Over Zoom meetings, or other virtual platforms, it is tremendously challenging to teach students. These challenges include recognizing student mistakes audibly and visually, and being able to give confident feedback on the incorrect notes played by learning musicians. Without having to delve into improving the complex systems that would be required to improve audio, video, and connection quality of these connections, we have another solution …

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

Qasm-To-Hls: A Framework For Accelerating Quantum Circuit Emulation On High-Performance Reconfigurable Computers, Anshul Maurya

Theses and Dissertations

High-performance reconfigurable computers (HPRCs) make use of Field-Programmable Gate Arrays (FPGAs) for efficient emulation of quantum algorithms. Generally, algorithm-specific architectures are implemented on the FPGAs and there is very little flexibility. Moreover, mapping a quantum algorithm onto its equivalent FPGA emulation architecture is challenging. In this work, we present an automation framework for converting quantum circuits to their equivalent FPGA emulation architectures. The framework processes quantum circuits represented in Quantum Assembly Language (QASM) and derives high-level descriptions of the hardware emulation architectures for High-Level Synthesis (HLS) on HPRCs. The framework generates the code for a heterogeneous architecture consisting of a …

Accelerating Machine Learning Inference For Satellite Component Feature Extraction Using Fpgas., Andrew Ekblad

Theses and Dissertations

Running computer vision algorithms requires complex devices with lots of computing power, these types of devices are not well suited for space deployment. The harsh radiation environment and limited power budgets have hindered the ability of running advanced computer vision algorithms in space. This problem makes running an on-orbit servicing detection algorithm very difficult. This work proposes using a low powered FPGA to accelerate the computer vision algorithms that enable satellite component feature extraction. This work uses AMD/Xilinx’s Zynq SoC and DPU IP to run model inference. Experiments in this work centered around improving model post processing by creating implementations …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

A Moving Target Architecture As A Side-Channel Countermeasure, Rachel M. Cazzola

Electrical and Computer Engineering ETDs

We investigate a novel side-channel attack countermeasure called Side-channel Power analysis Resistance for Encryption Algorithms using Dynamic partial reconfiguration (SPREAD). The countermeasure leverages a strategy that is best characterized as a moving target architecture. Modern field-programmable gate array (FPGA) architectures provide support for dynamic partial reconfiguration (DPR), a feature that allows real-time reconfiguration of portions of the programmable logic (PL) while the FPGA continues to carry out computing tasks. Using the Advanced Encryption Standard (AES), the proposed moving target architecture leverages DPR to change the implementation characteristics of the substitution boxes (SBOX) in real time. We present experimental hardware results …

Custom Led Dashboard Integration For The Cal Poly Racing Team, Josue Hernandez

Computer Engineering

The Custom LED Dashboard Integration was made for the Cal Poly Racing Team, specifically the BAJA division. The dashboard was made as a way to combat the current limitations endured from the past methods used to display critical information of the vehicle to the car. The display was made to combat issues of limited quantity of data being able to be displayed to the driver and its small readability was an issue, the display helped combat that by providing a greater quantity of data being able to be sent and displayed on the display and the information being displayed having …

Creating An Automatic Lowering Function For Quarter-Scale Tractor Pulling Sled, Sam Wilkins

Honors Program: Senior Projects (Public)

As the agricultural industry works to continuously integrate innovative technology and improve production efficiency, improved on-board data acquisition and transmission will be necessary for all agricultural machines. To make this a reality, the utilization of controller area network (CAN) technology will be crucial. Therefore, it is important for all agricultural engineers to have foundational knowledge of CAN bus systems and the standards that govern their use in industry. The UNL quarter-scale tractor team regularly utilizes CAN buses on their tractors and testing equipment. One such testing machine is the team’s pulling sled, which uses CAN messages to transport important information …

Sel4 On Risc-V - Developing High Assurance Platforms With Modular Open-Source Architectures, Michael A. Doran Jr

Masters Theses

Virtualization is now becoming an industry standard for modern embedded systems. Modern embedded systems can now support multiple applications on a single hardware platform while meeting power and cost requirements. Virtualization on an embedded system is achieved through the design of the hardware-software interface. Instruction set architecture, ISA, defines the hardware-software interface for an embedded system. At the hardware level the ISA, provides extensions to support virtualization.

In addition to an ISA that supports hypervisor extensions it is equally important to provide a hypervisor completely capable of exploiting the benefits of virtualization for securing modern embedded systems. Currently there does …

A Portable, Low Power Radiation Detection And Identification System For High Count Rate, Long Term Monitoring, Samuel J. Murray

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents the design of a novel radiation detection and identification system that can operate continuously over a period of 8 days while detecting at 30,000 counts per second, consuming a total of 11 mW. The entire system is highly integrated, containing a gamma ray detector, a high voltage detector power supply, and a multichannel analyzer (MCA) system-on-a-chip (SoC), which are all combined into a compact form using a multi-level, configurable printed circuit board design. The MCA SoC, fabricated using a 65 nm CMOS technology, features two enabling resources to allow low power detections at high count rates for …

Neural Compression Inference Accelerator: A Cost And Energy-Effective Alternative To Conventional Machine Learning Inference Methods, Matthew Wallace

Master's Theses

Recent developments in machine learning and artificial intelligence have sparked an influx of workloads that require specialized computer hardware for cloud services. The hardware running machine learning models predominantly consists of graphics processing units (GPUs) and tensor processing units (TPUs). However, these com- ponents are expensive for cloud services to purchase, costly for customers to rent, prone to price spikes, and energy-intensive. In this research we show that both cloud services and customers would benefit from utilizing field programmable gate arrays (FPGAs) to alleviate the aforementioned challenges. An FPGA can be configured as a machine learning accelerator, operating similarly to …

Characterization Of Low Power Hfo2 Based Switching Devices For In-Memory Computing, Aseel Zeinati

Theses

Oxide based Resistive Random Access Memory (RRAM) devices are investigated as one of the promising non-volatile memories to be used for in-memory computing that will replace the classical von Neumann architecture and reduce the power consumption. These applications required multilevel cell (MLC) characteristics that can be achieved in RRAM devices. One of the methods to achieve this analog switching behavior is by performing an optimized electrical pulse. The RRAM device structure is basically an insulator between two metals as metal-insulator-metal (MIM) structure. Where one of the primary challenges is to assign an RRAM stack with both low power consumption and …

Using An Embedded System For A Quality Cup Of Coffee, Evan Powers, Joshua Stermer, Tsion Yohannes

2023 Symposium

Many coffee lovers spend up to $5 on a cup of coffee everyday. To save money one could make them at home, but a quality machine with PIDs start at $1000. Using an embedded system one could spend less than $50 and a few hours implement PIDs into an existing $400 machine that will last a lifetime. microcontroller. Learning C language combined with hardware implementation applied to cheap and simple everyday objects can improve everyday quality of life and save money.

This is challenging because we have to incorporate the additional circuitry into a pre established circuit with limited space, …

Vi Energy-Efficient Memristor-Based Neuromorphic Computing Circuits And Systems For Radiation Detection Applications, Jorge Iván Canales Verdial

Electrical and Computer Engineering ETDs

Radionuclide spectroscopic sensor data is analyzed with minimal power consumption through the use of neuromorphic computing architectures. Memristor crossbars are harnessed as the computational substrate in this non-conventional computing platform and integrated with CMOS-based neurons to mimic the computational dynamics observed in the mammalian brain’s visual cortex. Functional prototypes using spiking sparse locally competitive approximations are presented. The architectures are evaluated for classification accuracy and energy efficiency. The proposed systems achieve a 90% true positive accuracy with a high-resolution detector and 86% with a low-resolution detector.

Iii-Nitride Triangular Microcantilevers For Multimodal Sensing Applications, Balaadithya Uppalapati

All Dissertations

Micro-electromechanical systems (MEMS)-based sensors have gained significant attention due to their ability to sense, measure, and process various physical, chemical, and biological parameters. The small size of MEMS sensors provides numerous advantages, including low power consumption, high sensitivity, and rapid response time, making them suitable for various applications in healthcare, automotive, aerospace, and consumer electronics.

In the past few years, AlGaN/GaN MEMS devices have been found to offer several advantages over silicon-based MEMS devices. One of the main advantages of AlGaN/GaN MEMS is their high sensitivity to surface stresses and forces due to their high piezoelectric coefficients. This sensitivity allows …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Design And Implementation Of High-Efficiency, Lightweight, System-Friendly Solid-State Circuit Breaker, Dehao Qin

All Dissertations

Direct current (DC) distribution system has shown potential over the alternative current (AC) distribution system in some application scenarios, e.g., electrified transportation, renewable energy, data center, etc. Because of the fast response speed, DC solid-state circuit breaker (SSCB) becomes a promising technology for the future power electronics intensive DC energy system with fault-tolerant capability. First, a thorough literature survey is performed to review the DC-SSCB technology. The key components for DC-SSCB, including power semiconductors, topologies, energy absorption units, and fault detection circuits, are studied. It is observed that the prior studies mainly focus on the basic interruption capability of the …

Stream Processor Development Using Multi-Threshold Null Convention Logic Asynchronous Design Methodology, Wassim Khalil

Graduate Theses and Dissertations

Decreasing transistor feature size has led to an increase in the number of transistors in integrated circuits (IC), allowing for the implementation of more complex logic. However, such logic also requires more complex clock tree synthesis (CTS) to avoid timing violations as the clock must reach many more gates over larger areas. Thus, timing analysis requires significantly more computing power and designer involvement than in the past. For these reasons, IC designers have been pushed to nix conventional synchronous (SYNC) architecture and explore novel methodologies such as asynchronous, self-timed architecture. This dissertation evaluates the nominal active energy, voltage-scaled active energy, …

Evaluation Of The Dynamic Vision Sensor’S Photoreceptor Circuit For Infrared Event-Based Sensing, Zinah M. Alsaad

Electrical and Computer Engineering ETDs

For space surveillance applications, neuromorphic imaging is being studied as it may perform sensing and tracking tasks with less power and downstream datalink demand. The read-out of the event-based camera is made to only be sensitive to changes in the signals it receives from the photodetector, which results in a datastream of events indicating where and when changes in illumination occur. This is in contrast to the conventional framing camera, which produces images by essentially counting the electrons produced by light incident on each pixel’s photodetector. These cameras are commercially available with siliconbased detectors for applications involving visible wavelengths. However, …

Automated Sensing Methods In Soft Stretchable Sensors For Soft Robotic Gripper, Prosenjit Kumar Ghosh

Electrical Engineering Theses

A soft robot is made from deformable and flexible materials such as silicone, rubber, polymers, etc. Soft robotics is a rapidly evolving field where the human-robot-interaction and bio-inspired design align. The physical characteristics such as highly deformable material and dexterity make soft robots widely applicable. A soft robotic gripper is a robotic hand that acts like a human hand and grasps any object. The most common applications of soft robotics grippers are gripping and locomotion in sensitive applications where high dynamic and sensitivity are essential. Nowadays, soft robotics grippers are used without any sensing method and feedback as it is …

Phone Microwave, Khanh Kim Hoang, Emily Zhou

Computer Engineering

This project involves the installation of remote-control capabilities in an antique 1980s microwave, effectively turning the microwave into a “smart” device. While preserving the original functionality of the microwave, a combination of software and hardware components allows for remote microwave operations. The microwave can be remotely operated by calling the built-in number, and more advanced settings and options can be utilized by texting. The microwave is also secured against unauthorized use with the addition of a PIN code that is required to operate the device.

Safe Kids Car, Nathan Keenan, Jackson Piper, Kyle Law, Anthony Meniru

Williams Honors College, Honors Research Projects

The main goal of this project is to retrofit toy vehicles, such as Powerwheels cars, with safety systems that can protect the driver and those around the driver. Such systems will include lights, including headlights and taillights, and an automatic braking system, which will activate in the face of an inevitable collision. The system will also work with the driver to prevent collisions, providing warnings of impending danger.

Keywords: toy vehicles, collision detection, collision avoidance, automatic braking system, DC motors, automatic headlights.

Wireless Kick Pedal, Jacob Wise, Ryan Kinyo, Bradley Toth, Ian Zanath

Williams Honors College, Honors Research Projects

The goal of the project is to build a wireless kick pedal that allows accessibility to drummers that have leg or foot disabilities and add versatility to multi-instrumentalists looking to add percussion while playing another instrument. The proposed pedal is designed in two main parts, a wearable band that tracks the player’s movement, and a hammer mechanism that receives actuation commands from the wearable band to move the hammer and deliver a drumbeat. The band is designed to be worn on several parts of the body, including the ankle, knee, thigh, or even the arm depending on the user’s situation. …

Wireless Environmental Weather Monitor, Joel Christie-Millett, Nathan Schroeder, Sylvester Wilson, Matthew Szijarto

Williams Honors College, Honors Research Projects

The goal of this senior design/honors project is to create a device that monitors environmental conditions in order to detect a wildfire. This device should notify a user of the status of the environment. The device should also last for 6 months without any human interaction. My role on the team is to design the power supply system that maximizes efficiency and uses renewable energy.

Performance Evaluation Of Face Mask Detection For Real-Time Implementation On An Rpi, Ivan George L. Tarun, Vidal Wyatt M. Lopez, Pamela Anne C. Serrano, Patricia Angela R. Abu, Rosula Reyes, Ma. Regina Justina Estuar

Department of Information Systems & Computer Science Faculty Publications

Mask-wearing remains to be one of the primary protective measures against COVID-19. To address the difficulty of manual compliance monitoring, face mask detection models considerate of both frontal and angled faces were developed. This study aimed to test the performance of the said models in classifying multi-face images and upon running on a Raspberry Pi device. The accuracies and inference speeds were measured and compared when inferencing images with one, two, and three faces and on the desktop and the Raspberry Pi. With an increasing number of faces in an image, the models’ accuracies were observed to decline, while their …

A Phase Change Memory And Dram Based Framework For Energy-Efficient And High-Speed In-Memory Stochastic Computing, Supreeth Mysore

Theses and Dissertations--Electrical and Computer Engineering

Convolutional Neural Networks (CNNs) have proven to be highly effective in various fields related to Artificial Intelligence (AI) and Machine Learning (ML). However, the significant computational and memory requirements of CNNs make their processing highly compute and memory-intensive. In particular, the multiply-accumulate (MAC) operation, which is a fundamental building block of CNNs, requires enormous arithmetic operations. As the input dataset size increases, the traditional processor-centric von-Neumann computing architecture becomes ill-suited for CNN-based applications. This results in exponentially higher latency and energy costs, making the processing of CNNs highly challenging.

To overcome these challenges, researchers have explored the Processing-In Memory (PIM) …