VLSI and Circuits, Embedded and Hardware Systems Commons^™

Dashboard And Racing Telemetry, Cole Barach, Jacob Koshel, Ethan Zifzal, Matthew Sullivan

Williams Honors College, Honors Research Projects

The main goal of the project is to design and manufacture a combined dashboard and data logger for the vehicles produced by the Zips Racing design team. The dashboard will intuitively display real-time information to the driver and record all received information while driving. This information may be pulled off the device later for performing data analysis. This project will incorporate custom PCB design, surface mount soldering, embedded software development, and the CAN communication protocol.

Dual-Interface Wifi Packet Sniffer System Using Esp32-Cam With Real-Time Pcap Generation For Iot Network Analysis, Boy Setiawan Boy, Maghfiroh Maulani, Zico Pratama Putra, Muhammad Senoyodha Brennaf

Makara Journal of Technology

This study focuses on designing and implementing a cost-effective and energy-efficient WiFi packet sniffer system using the ESP32. The ESP32-CAM module, which combines WiFi, Bluetooth, and microSD support, is used to capture IEEE 802.11 frames in real-time via promiscuous mode. Packets are stored in packet capture format, which is compatible with tools such as Wireshark and Scapy. Developed using the official ESP-IDF, it offers low-level control and high performance. Two user interfaces were implemented: a UART-based text menu and a web-based HTTPS menu hosted on the ESP32 itself. Functional and performance evaluations were conducted with a focus on capturing broadcast …

Lightlink: Visible Light Communication For Batteryless Devices With Variable Computational Load, Charles Phillips

All Theses

Visible Light Communication (VLC) devices have been experimentally proven to work as a suitable communication medium for batteryless devices. However, the effects of practical load have yet to be fully explored. To that end, we have developed LightLink, a new MAC and PHY layer protocol for VLC within batteryless devices, and have studied various ways that computational load can affect transmission accuracy in realistic scenarios. Our key findings point us towards an adaptive VLC reception system based on inferred environmental variables.

Blockchain-Integrated Version Control For Secure And Transparent Software Supply Chains, Iwinosa W. Aideyan

All Theses

The software supply chain encompasses all stages of software development and delivery from initial coding and version control to integration and deployment. As development environments become increasingly distributed and reliant on external dependencies, ensuring the integrity, auditability, and consistency of code changes has become a pressing challenge. Traditional version control systems like Git, while effective for collaboration and tracking revisions, do not inherently provide tamper-evident commit histories. Features such as history rewriting (e.g., git rebase, git push --force) can be exploited to manipulate commit logs without detection, posing risks in security-sensitive domains. This thesis proposes a blockchain-integrated version control framework …

Trace Flight Computer, Zachary Stratton, Vandad Mossavand Varkaneh, Nicholas Ely

Williams Honors College, Honors Research Projects

In the world of collegiate rocketry, there are currently no commercial-off-the-shelf flight computers capable of being fitted to liquid engine rockets with thrust vectoring control. Currently, amateur rocketeers utilize unreliable Arduino-based systems or expensive drone computers. The objective of this project is to design a flight computer capable of data collection and filtering, telemetry transmission, and real-time controls of critical safety systems using readily available commercial-off-the-shelf components to allow rocketeers to complete their designs within a reasonable budget. The system will collect data from two IMUs, a barometric altimeter, and a magnetometer, then filter the collected data using custom Kalman …

Phone Microwave, Khanh Kim Hoang, Emily Zhou

Computer Engineering

This project involves the installation of remote-control capabilities in an antique 1980s microwave, effectively turning the microwave into a “smart” device. While preserving the original functionality of the microwave, a combination of software and hardware components allows for remote microwave operations. The microwave can be remotely operated by calling the built-in number, and more advanced settings and options can be utilized by texting. The microwave is also secured against unauthorized use with the addition of a PIN code that is required to operate the device.

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Soil Sensor Network, Andrea Wyder, Ross Klonowski, Alexis Alves, Luke Farnsworth

Williams Honors College, Honors Research Projects

Water management during crop irrigation is a problem for the agricultural industry. To help farmers better maintain water usage, a wireless soil sensor network comprised of a sensor pod and wireless communication has been designed and implemented. It was proven that the sensor pod can be installed 6-8 inches below the ground and communicate up to at least a 6km distance back to the gateway. The senor pod shells have a 2 mm thick shell to prevent the pod from shattering when coming into contact with the ground after being released from the planter, as calculated through the force of …

Smart Doggy Door, Jaret Helminski, Brandon Caldwell, Jason Marcum, Nathaniel Hall

Williams Honors College, Honors Research Projects

The smart doggy door is an engineering senior design project which will be completed in the spring of 2021. The goal of this project is to design and implement a dog door that can detect when a dog is near. After that it will determine if the dog is allowed to use the door and it will then open if the dog is allowed to go through the door. This device will also send a notification to the dogs owner via an app on their phone. This device will allow dog owners to keep unwanted animals out as well as …

Side-Channel Power Resistance For Encryption Algorithms Using Implementation Diversity, Ivan M. Bow

Electrical and Computer Engineering ETDs

This thesis paper investigates countermeasures to hardware side-channel attacks and proposes a new solution to this ever growing threat against data integrity and security. The side-channel attack methods, differential power analysis and correlation power analysis, are both very powerful techniques and are used to gain access to secrets inside of a field programmable gate array that are otherwise inaccessible, in particular the cryptographic key for the Advanced Encryption Standard algorithm. To counter these attacks, we propose a method of changing the internal hardware configuration of the field programmable gate array using dynamic partial reconfiguration. Using this method, we change the …

Zips Racing Electric Can Communications, Andrew Jordan, Adam Long, Susanah Kowalewski, Rami Nehme

Williams Honors College, Honors Research Projects

The CAN protocol has been a standard of electronic communication networks of automotive vehicles since the early 2000s due to its robust reliability in harsh environments. For the 2020 competition year, the Zips Racing Electric design team will be building an entirely new, fully-electric vehicle with CAN communication implemented rather than communicating via pure analog signals. Hardware and software can be utilized to read analog electrical signals from a source, such as accelerator and brake sensors, and encode them into a digital message that meets the CAN 2.0B communication protocol standard. Likewise, software can be used to extract data from …

Digital, Automated Reactive Target System, Nicholas Haas, Saipranay Vellala, Trandon Ware, Thomas Martin

Williams Honors College, Honors Research Projects

In this era, technology is woven into almost every facet of our leisure activities. Although technology has innovated hobbies ranging from chess to soccer, the art of shooting has been neglected. Unnecessary insufficiency such as bullet ricochets off of mechanical steel targets, ineffective progress tracking, and general inaccessibility to outdoor training facilities are all improvable areas of this sport. The Dynamic Automated Reactive Target (D.A.R.T) System aims to fill some of these gaps and help modernize recreational marksmanship. Modeling the system after a dueling tree will optimize the use of the system and allow for different training models to challenge …

Smart Collar, Gretchen T. Woodling, Sean Moran, Justen Bischoff, Jacob Sindelar

Williams Honors College, Honors Research Projects

The Smart Collar is a universal pet tracker, designed to be small and exceedingly comfortable for any pet to wear. GPS technology is used to locate the device, allowing the user to track their pet, via a smart phone application. This application can be used to program the device, view maps of their pet’s location and history of travel. Operating primarily on Long Range Wide Area Network (LoRaWAN) for data transfer, the device consumes very little power, allowing for several days of run-time per charge of the battery. Boasting no monthly service fees, The Smart Collar provides pet owner’s an …

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …

Autonomous Speed Control For Kia Optima, Andrew J. Combs, Kyle Fugatt, Kevin Mcfall

The Kennesaw Journal of Undergraduate Research

The standard method for speed control is the cruise control system built into most modern vehicles. These systems employ a PID controller which actuates the accelerator thus, in turn, maintains the desired vehicle speed. The main drawback of such a system is that typically the cruise control will only engage above 25 mph. The goal of this paper is to describe a system which we used to control vehicle speed from a stop to any desired speed using an Arduino microcontroller and a CAN BUS shield, from where autonomous features can be built upon. With this system, we were able …

Project Pradio, Trigg T. La Tour

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper examines the design and manufacturing of a device that allows two or more users to share a wireless audio stream. Effectively, this allows a group of people to listen to the same audio in a synchronized manner. The product was unable to be completed in the allotted time. Regardless, significant progress was made and valuable insight into the circuit board design process was gained.

El Capitán: Cal Poly Rose Float Digital Drive System, Gregory Raffi Baghdikian

Computer Engineering

In today’s world of smartphones, self-driving cars, and internet-connected coffee makers, it seems as if computers are contained in everything around us. These “embedded systems” have become critical components of our lives, improving everything about the things they control, from cost, to speed, to simplicity. One area that embedded systems has hardly gained a foothold is in the world of floatbuilding. Most of the floats in the Tournament of Roses Parade, including the one built jointly by Cal Poly San Luis Obispo and Cal Poly Pomona, are technologically very simple, using mostly analog components and rudimentary discrete digital logic to …

High-Speed Mobile Networks For Modern Farming And Agricultural Systems, Santos Najar

Master's Theses

ABSTRACT

High-Speed Mobile Networks for Modern Farming and Agricultural Systems

J.Santos Najar-Ramirez

High-speed mobile networks are necessary for agriculture to inventory individual plant health, maximize yield and minimize the resources applied. More specifically, real-time information on individual plant status is critical to decisions regarding the management of resources reserved and expended. This necessity can be met by the availability of environmental sensors (such as humidity, temperature, and pH) whose data is kept on storage servers connected to static and mobile local area networks. These static and mobile local area networks are connected to cellular, core and satellite networks. For …

An Ant-Based Sensor Measurement Data Gathering System, Bolun Zhang, Dimitrios Peroulis

The Summer Undergraduate Research Fellowship (SURF) Symposium

Large-scale industries involved with a great amount of sensor measurements in their work are facing many challenges in data collection. Sensors are not on the same network; therefore each measurement has to be managed separately. Gathering all the measurement data to one terminal could be difficult. Once a measurement is obtained, it takes significant amount of time to process the data.The approaches our group takes here is to build a giant ANT wireless network that holds all the sensors’ measurements. To be more specific, every sensor has an ANT chip set up on its side. Each ANT chip is as …

Independent Component Analysis Enhancements For Source Separation In Immersive Audio Environments, Yue Zhao

Theses and Dissertations--Electrical and Computer Engineering

In immersive audio environments with distributed microphones, Independent Component Analysis (ICA) can be applied to uncover signals from a mixture of other signals and noise, such as in a cocktail party recording. ICA algorithms have been developed for instantaneous source mixtures and convolutional source mixtures. While ICA for instantaneous mixtures works when no delays exist between the signals in each mixture, distributed microphone recordings typically result various delays of the signals over the recorded channels. The convolutive ICA algorithm should account for delays; however, it requires many parameters to be set and often has stability issues. This thesis introduces the …

Lyfi, Kianoosh Salami, Justin Cotton, Elush Shirazpour

Electrical Engineering

This paper will cover the steps necessary to design, build, and manage networkable smart light switches over WiFi via a mobile application. It contains a microcontroller running a real time operating system, a WiFi module, a Java server with SQLite databasing, and a mobile phone application.

LyFi is designed to turn on/off and dim household lights while only requiring the same installation procedure as a less capable dimmer switch. Once installed and connected to a network, LyFi will self-discover and configure. The server automatically propogates a database of nodes where any mobile device running an application can receive an updated …

Wireless Embedded Smart Cameras: Performance Analysis And Their Application To Fall Detection For Eldercare., Alvaro Pinto

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Wireless Embedded Smart Camera Networks has received a lot of attention from academia and industry because they are small in size and easy to deploy, and they offer a multitude of attractive applications. They can be used for embedded single unit applications, or can be networked for multi-camera applications.

We first analyze three different operation scenarios for a wireless vision sensor network wherein different levels of local processing is performed. A detailed quantitative comparison of three operation scenarios are presented in terms of energy consumption and latency. This quantitative analysis provides the motivation for performing high-level local processing and decision …

Project 308: Augmented Reality Mario Kart, Joseph Abad, David Allender, Joryl Calizo, Ryan Gaspar, Gavin Lee

Computer Engineering

Mario Kart is a popular go-kart racing game developed by Nintendo. The premise of the game is simple: drive a go-kart along a racetrack and reach the finish line before the other players. What makes this game unique, however, is the inclusion of weapons, traps, and other projectiles that a player can use to gain an advantage in the race. We have taken on the challenge of not only recreating this amazing game, but using the art of Augmented Reality to fully immerse the player in the full experience. Rather than play the game on a television screen with a …

Increasing Efficiency In Boundary Security With Wireless Sensor Networks And Geospatial Information Systems Using Homology Theory, Luis Berumen^, Eric Chaidez^, Hamide Dogan*, Jose Gerardo Rosiles**

COURI Symposium Abstracts, Spring 2011

As part of an institutional investigation, we attempt to address the challenges the US customs and Border protection agency faces in the El Paso region. Our research focuses on defining a system for the surveillance application, and the use of mathematical models employed to achieve a greater efficiency of such architecture. With the use of the defined system, we apply homology theory through the algebraic process of topology, to accomplish an independent coordinate-free based system, which covers the surveillance area, with lesser quantity of sensor nodes. Our architecture makes the use of an operating system for wireless sensor networks; TinyOS, …

Global Positioning Logger, Matthew Hall

Computer Engineering

The Global Positioning Logger (GPL) is a mobile embedded device that utilizes GPS technology. The GPS data is used to display current speed and past global locations.