Electronic Devices and Semiconductor Manufacturing Commons^™

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Sers Platform For Single Fiber Endoscopic Probes, Debsmita Biswas

LSU Doctoral Dissertations

Molecular detection techniques have huge potential in clinical environments. In addition to many other molecular detection techniques, endoscopic Raman spectroscopy has great ability in terms of minimal invasiveness and real-time spectra acquisition. However, Raman Effect is low in sensitivity, limiting the application. Surface-Enhanced Raman Scattering (SERS), addresses this limitation. SERS brings rough nano-metallic surfaces in contact with specimen molecules which enormously enhances Raman signals. This provides Raman spectroscopy with immense capabilities for diverse fields of applications.

Generally, in clinical probe applications, the spectrometer is brought near the target molecules for detection. Typically, optical fibers are used to couple spectrometers to …

Redefining Research In Nanotechnology Simulations: A New Approach To Data Caching And Analysis, Darin Tsai, Alan Zhang, Aloysius Rebeiro

The Journal of Purdue Undergraduate Research

No abstract provided.

Design Of Arbitrary Planar Optical Devices With Full Phase Control Using Nanoimprinting Of Refractive Index, Matthew Panipinto

All Theses

Planar optical devices offer a lightweight solution to the constraints found in traditional optical devices. While subwavelength patterning of optics offers attractive performance and size, traditional fabrication methods demand a trade-off between resolution and throughput that presents a significant hurdle for the widespread use of subwavelength devices. Nanoimprinting of refractive index (NIRI) is a novel fabrication method pioneered in previous work that offers promise in mitigating the throughput issues that hamstring traditional fabrication methods. However, NIRI has not been shown to impart full $2\pi$ phase control in planar optical devices, nor has a method for fabricating arbitrary designs using the …

Application Of The Core Shell Model For Strengthening Polymer Filament Interfaces, Yu-Chung Lin, Aniket Raut, Yiwei Fang, Yifan Yin, David Sprouster, Tai-De Li, Guillaume Freychet, Mikhail Zhernenkov, Steve Nitodas, Jonathan Sokolov, Yuval Shmueli, Miriam Rafailovich

Advanced Science Research Center

While surface segregation has been intensively studied in thin films, relatively little has been investigated in filament geometries. In contrast to thin films, the filament surface forms a continuum, with interactions both at the free air and internal filament interface, which makes it difficult to achieve an equilibrium configuration. This asymmetry has become particularly apparent with the increasing use of additive manufacturing where entire structures are constructed via layered deposition of filamentous layers from a moving thermal nozzle. In addition, this process is highly non-equilibrated with poor thermal retention and is responsible for insufficient filament–filament interfacial fusion and internal pore …

Potassium And Sodium Sensing Isfet Device And Array, Liam Stephen Hayes

Electrical Engineering

The use of Ion-Sensitive Field Effect Transistors (ISFETs) as a means of testing a person’s potassium concentration in real-time has broad applications in the consumer space. An avid runner could use such a device to keep track of their hydration and salt levels. A hospital could use it for patients who require around-the-clock remote monitoring, and a variation of ISFETs are currently being used as continuous glucose monitors for diabetes patients. While ISFETs are not a new development in the field of microelectronics, their use as wearable devices has recently become relevant. The goal of this project is primarily to …

Design And Analysis Of A Discrete, Pcb-Level Low-Power, Microwave Cross-Coupled Differential Lc Voltage-Controlled Oscillator, Pavin Singh Virdee

Master's Theses

Radio Frequency (RF) and Microwave devices are typically implemented in Integrated Circuit (IC) form to minimize parasitics, increase precision and tolerances, and minimize size. Although IC fabrication for students and independent engineers is cost-prohibitive, an abundance of low-cost, easily accessible printed circuit board (PCB) and electronic component manufacturers allows affordable PCB fabrication.

While nearly all microwave voltage-controlled oscillator (VCO) designs are IC-based, this study presents a discrete PCB-level cross-coupled, differential LC VCO to demonstrate this more affordable and accessible approach. This thesis presents a 65 mW, discrete component VCO PCB with industry-comparable RF performance. A phase noise of -103.7 dBc/Hz …

Low-Cost And Biodegradable Thermoelectric Devices Based On Van Der Waals Semiconductors On Paper Substrates, Gulsum Ersu, Carmen Munuera, Federico J. Mompean, Daniel Vaquero, Jorge Quereda, Jooao Elias Rodrigues, Jose A. Alonso, Eduardo Flores, Jose R. Ares, Isbael J. Ferrer, Adbullah M. Al-Enizi, Ayman Nafady, Sruthi Kuriakose, Joshua O. Island, Andres Castellanos-Gomez

Physics & Astronomy Faculty Research

We present a method to fabricate handcrafted thermoelectric devices on standard office paper substrates. The devices are based on thin films of WS2, Te, and BP (P-type semiconductors) and TiS3 and TiS2 (N-type semiconductors), deposited by simply rubbing powder of these materials against paper. The thermoelectric properties of these semiconducting films revealed maximum Seebeck coefficients of (+1.32 ± 0.27) mV K−1 and (−0.82 ± 0.15) mV K−1 for WS2 and TiS3, respectively. Additionally, Peltier elements were fabricated by interconnecting the P- and N-type films with graphite electrodes. A thermopower value up to 6.11 mV K−1 was obtained when the Peltier …

28 Ghz Patch Antenna Array With Reduced Mutual Coupling For 5g Communications Systems, Rahabu F. Mwang’Amba, Hashimu Uledi Iddi

Tanzania Journal of Engineering and Technology (TJET)

A 28 GHz patch antenna array with reduced mutual coupling for 5G communication systems is presented in this paper. Two elements antenna array was simulated with a periodic boundary to represent an infinity array. The antenna array is attached with a pair of the coupled directional coupler with a coupling value of -3.47 dB, and transmission lengths of 3.40 mm and 7.62 mm depending on the antenna array's magnitude and phase coefficient were designed and simulated. A reduced mutual coupling of -31.86 dB compared to -10.75 dB for an array without a decoupling network was observed. The wide scanning angle …

Raman Thermometry Of Graphene Based Thermal Materials, Pengcheng Xu

Electrical Engineering Theses and Dissertations

With the growing demand for high performance computing, we are pushing for higher performance integrated circuits at an ever faster rate. Recent advances in semiconductor production technology sees transistors with a 5 nm process devices being produced for consumer use. This enabled engineers to pack tens of billions of transistors in a package no larger than a fingernail. However, that brings up a problem that we have been long battling against. How can we get rid of the heat produced by these billions of transistors. The current electronic performance is bottle-necked by the ability of the package taking heat away …

Charger Robotic Air Hockey-Modified Air Hockey Table Featuring Automated Play Against A Human Opponent, Robert Geren

Honors Capstone Projects and Theses

No abstract provided.

Sub-Bandgap Photon-Assisted Electron Trapping And Detrapping In Algan/Gan Heterostructure Field-Effect Transistors, Andrew Gunn

All Theses

We have investigated photon-assisted trapping and detrapping of electrons injected from the gate under negative bias in a heterostructure field-effect transistor (HFET). The electron injection rate from the gate was found to be dramatically affected by sub-bandgap laser illumination. The trapped electrons reduced the two-dimensional electron gas (2DEG) density at the AlGaN/GaN heterointerface but could also be emitted from their trap states by sub-bandgap photons, leading to a recovery of 2DEG density. The trapping and detrapping dynamics were found to be strongly dependent on the wavelength and focal position of the laser, as well as the gate bias stress time …

Etching Process Development For Sic Cmos, Weston Reed Renfrow

Graduate Theses and Dissertations

Silicon Carbide (SiC) is an exciting material that is growing in popularity for having qualities that make it a helpful semiconductor in extreme environments where silicon devices fail. The development of a SiC CMOS is in its infancy. There are many improvements that need to be made to develop this technology further. Photolithography is the most significant bottleneck in the etching process; it was studied and improved upon. Etching SiC can be a challenge with its reinforced crystal structure. Chlorine-based inductively coupled plasma (ICP) etching of intrinsic SiC and doped SiC, SiO2, and Silicon has been studied. A baseline chlorine …

Study Of Thin Gan/Ingan/Gan Double Graded Structures For Future Photovoltaic Application, Mirsaeid Sarollahi

Graduate Theses and Dissertations

Indium gallium nitride (In_x Ga_(1-x) N) materials have displayed great potential for photovoltaic and optoelectronic devices due to their optical and electrical properties. Properties such as direct bandgap, strong bandgap absorption, thermal stability and high radiation resistance qualify them as great materials for photovoltaic devices. The tunable bandgap which absorbs the whole solar spectrum is the most significant feature which became attractive for scientists. The bandgap for these materials varies from 0.7 eV for InN to 3.4 eV for GaN covering from infrared to ultraviolet. In_x Ga_(1-x) N wurtzite crystal is grown on GaN buffer layer by Molecular Beam Epitaxy …

Design Tunneling Transistor And Schottky Junction Solar Cell Using Van Der Waals Semiconductor Heterostructure, Md Azmot Ullah Khan

LSU Doctoral Dissertations

Transition metal di-chalcogenide (TMDC) materials, being semiconductor in nature, offer Two-dimensional (2D) materials such as graphene and molybdenum disulfide (MoS₂) possess unique and unusual properties that are particularly applicable to nanoelectronics and photovoltaic devices. In this dissertation, four different projects have been done that encompass the implementation of these materials to improve the performance of future transistors and Schottky junction solar cells. In chapter 2, an analytical current transport model of a dual gate tunnel field-effect transistor (TFET) is developed by utilizing the principle of band-to-band tunneling (BTBT) and MoS₂ as the channel material. Later, using this …

Machine Learning Approach For Classifying Power Outage In Secondary Electric Distribution Network, Stephan Mgaya, Hellen Maziku

Tanzania Journal of Engineering and Technology (TJET)

Power outage is the problem that hinders social and economic development especially for developing countries like Tanzania. Frequent power outages damage electric equipment, and negatively affect the industrial production process. Power outages cannot be completely eradicated due to uncontrolled cause like natural calamities but technical challenges can be managed and hence reducing power outages. The existing manual methods used to locate power outage like customer calls is inefficient and time consuming. On the other hand, modern method like the Advanced Metering Infrastructure (AMI) still faces a challenge in effectively classifying power line outage due to the nature of imbalanced datasets. …

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …

Surface-Wave Coupling In Double Floquet Sheets Supporting Phased Temporal Wood Anomalies, Ya-Wen Tsai, Yao-Ting Wang, Emanuele Galiffi, Andrea Alù, Ta-Jen Yen

Advanced Science Research Center

We investigate symmetry-selective surface-mode excitation in a general periodically time-modulated double-layer system, where the modulation of the two layers has a constant phase difference. By deriving a semi-analytic transfer matrix formalism of a Drude-dispersive double-layer structure with periodic time-modulation, we calculate the scattering amplitudes and the corresponding transmission coefficient. Our results show that the phase-difference between the modulation of the two sheets plays an essential role in significantly enhancing and selectively exciting either the even or odd surface mode with high efficiency. We verify our calculations with full-wave time-domain simulations, showing that efficient switching between the surface-wave excitation of the …

Characterization Of Electrophoretic Deposited Zinc Oxide Nanopartices For The Fabrication Of Next-Generation Nanoscale Electronic Applications, Fawwaz Abduh A. Hazzazi

LSU Doctoral Dissertations

Several reports state that it is crucial to analyze nanoscale semiconductor materials and devices with potential benefits to meet the need for next-generation nanoelectronics, bio, and nanosensors. The progress in the electronics field is as significant now, with modern technology constantly evolving and a greater focus on more efficient robust optoelectronic applications. This dissertation focuses on the study and examination of the practicality of Electrophoretic Deposition (EPD) of zinc oxide (ZnO) nanoparticles (NPs) for use in semiconductor applications.

The feasibility of several synthesized electrolytes, with and without surfactants and APTES surface functionalization, is discussed. The primary objective of this study …

Gamma And Neutron Irradiation Effect On Ga-Polar And N-Polar Gan Based Diodes, Farnood Mirkhosravi

Optical Science and Engineering ETDs

III-nitride material (GaN) shows a lot of potential for next-generation power electronics. This material is advantageous due to its wide bandgap, high electron mobility, high thermal and mechanical stability, small form factor, and higher radiation tolerance. The higher radiation tolerance makes the GaN-based devices more attractive for harsh-environment applications, like aerospace, nuclear reactor, and fusion facilities, particle accelerators, and post-detonation environments applications.

GaN due to its unique crystal structure can be grown in different orientations and can provide specific advantages in electronic and optoelectronic devices. While the Ga-polar orientation of GaN has been widely investigated for its proprieties, there are …

Group-Based Data Offloading Techniques Assisted By D2d Communication In 5g Mobile Network, Juma S Ally

Tanzania Journal of Engineering and Technology (TJET)

Machine type communication devices proposed as one of the substantial data collections in the 5G of wireless networks. However, the existing mobile communication network is not designed to handle massive access from the MTC devices instead of human type communication. In this context, we propose the device-to-device communication assisted a mobile terminal (smartphone) on data computing, focusing on data generated from a correlated source of machine type communication devices. We consider the scenario that the MTC devices after collecting the data will transmit to a smartphone for computing. With the limitation of computing resources at the smartphone, some data are …

An Experimental Approach Towards Pv-Based Solar System Sizing For An Engineering Laboratory, Muyideen O. Lawal

Tanzania Journal of Engineering and Technology (TJET)

This study aims at providing an experimental sizing procedure for a rooftop PV-based solar power system for an engineering laboratory. This was achieved by monitoring the peak power and energy delivered by an installed 20W solar panel into an 18 Ah battery. Knowledge of the average daily peak power and energy was used to determine the percentage rated capacity available for use and the sun hour. A load consumption comparison was also carried out with and without the connection of a load to inverter. In addition to this, the monitoring of the no-load consumption of the inverter was carried out. …

Efficient And Simple Heuristic Algorithm For Portfolio Optimization Collether John, Collether John

Tanzania Journal of Engineering and Technology (TJET)

Markowitz model considers what is termed as standard portfolio optimization. The portfolio optimization problem is a problem which based on asset allocation and diversification for maximum return with minimum risk. Thus, the standard portfolio optimization problem happens when the constraints considered are budget and no-short selling. In reality however, portfolio optimization has realistic constraints to be incorporated such as holding sizes, cardinality and transaction cost. When realistic constraints are added into portfolio optimization problem, it becomes too complex to be solved by standard optimization methods which in this case turns to be an extended portfolio optimization problem. Markowitz solution and …

Noncontact Liquid Crystalline Broadband Optoacoustic Sensors, Hengky Chandrahalim, Michael T. Dela Cruz

AFIT Patents

An optoacoustic sensor includes a liquid crystal (LC) cell formed between top and bottom plates of transparent material. A transverse grating formed across the LC cell that forms an optical transmission bandgap. A CL is aligned to form a spring-like, tunable Bragg grating that is naturally responsive to external agitations providing a spectral transition regime, or edge, in the optical transmission bandgap of the transverse grating that respond to broadband acoustic waves. The optoacoustic sensor includes a narrowband light source that is oriented to transmit light through the top plate, the LC cell, and the bottom plate. The optoacoustic sensor …

Machine Learning Applications To Static Timing Analysis, Waseem Mohamed Raslan

Theses and Dissertations

Modeling complex cell behavior is critical for accurate static timing analysis. Effective current source model, ECSM, and composite current source, CCS, waveform data compression became a necessity to reduce the size of technology files and increase the accuracy of the cell characterization data. We used deep learning nonlinear Autoencoders to compress voltage and current waveforms and compared them with singular value decomposition, SVD, approach. Autoencoders gave ~1.67x compression ratio for voltage waveforms better than SVD approach and gave 45x to 55x better compression ratio compared to other lossless techniques like bz2 and gzip. Autoencoders achieved ~1.7x compression ratio for complex …

Design And Analysis Of N-Path Filter For Radio Frequencies, Nathan M. Bergen

Master's Theses

Due to the growth of wireless communication many communication frequencies have grown increasingly dense. This density requires higher Q-factor to receive only the signal of interest. With the rise of smaller integrated circuits previous solutions used for filtering have become viable again. This paper explores whether the N-path filter is viable in the modern day for radio frequency receiver purposes. A non-differential N-path filter was created by utilizing Cadence Virtuoso with a working center frequency range of 750MHz to 1GHz while using TSMC technology. The desired quality factor of over 1,000 was reached while maintaining a total area of 800 …

Multifamily Complex Smart Locks For Property Management And Tenant Security, April Mills, Allen Chen, Dana Kumamoto, Michael Cook

Mechanical Engineering

Maintaining and managing hundreds of locks and physical keys for an apartment complex can be time consuming and costly, especially when the apartments turn over to new tenants. Our goal was to develop a smart door lock that is compatible with Obodo’s management app for apartment complexes to make accessing apartments secure and simpler for tenants and easier to manage for owners.

We designed and manufactured one smart door lock that is powered with four AA batteries and utilizes a dynamic NFC device and Bluetooth technology. The board can enter a sleep mode which reduces power consumption. The dynamic NFC …

Behavior, Switching Losses, And Efficiency Enhancement Potentials Of 1200 V Sic Power Devices For Hard-Switched Power Converters, Ali Mahmoud Salman Al-Bayati, Mohammad Abdul Matin

Electrical and Computer Engineering: Faculty Scholarship

Semiconductor power devices are the major constituents of any power conversion system. These systems are faced by many circumscriptions due to the operating constraints of silicon (Si) based semiconductors under certain conditions. The emergence and persistence evolution of wide bandgap technology pledge to transcend the restrictions imposed by Si based semiconductors. This paper presents a thorough experimental study and assessment of the performance of three power devices: 1200 V SiC cascode, 1200 V SiC MOSFET, and 1200 V Si IGBT under the same hardware setup. The study aims to capture the major attributes for each power device toward determining their …

Influence Of Materials And Design Parameters On Zinc Oxide Surface Acoustic Devices, Samuel B. Dewhitt

Theses and Dissertations

This thesis presents research into Zinc Oxide (ZnO) based resonators to include Width Extensional Mode (WEM), Length Extensional Mode (LEM), and Surface Acoustic Wave (SAW) devices. The design and operation of ZnO based SAW devices are investigated further to characterize design parameters and operating modes. Their design, fabrication, and results are discussed in detail. SAW device testing in conjunction with X-Ray Diffractometry (XRD) and Atomic Force Microscopy (AFM) are utilized to characterize ZnO and its deposition parameters on a variety of different substrates and interlayers, with different deposition temperatures and annealing parameters. These substrates include silicon, silicon oxide-on-silicon, and sapphire …

X-Band Rf Transmitter Design For Multi-Purpose Small Satellite Communication Operations, Omer F. Gumus

Master's Theses

This thesis provides a description of the analysis, design, and tests of an X-band RF Transmitter communication system for small satellites. X-band transmitter systems are becoming popular in the upcoming deep space missions. Most of the deep-space ground stations have been using X-band frequencies to receive or transmit signals. The X-band (<10 GHz) can offer lower atmospheric losses and up to a couple of Mbps data rates for multiple satellite operations. Nowadays, many small satellites have been using frequency bands such as VHF, UHF, L, and S-band frequencies for communication. From deep space to the ground station, the low-frequency ranges are inadequate in providing Mbps level data rates and enough bandwidth for deep space missions.

The main focus of this thesis was the development of the subsystems such as gain block amplifier, Mixer, Bandpass Filter, and RF power amplifier. The subsystems were designed separately, then they were connected together to perform an end-to-end system test. One of the thesis aims is to design …