Electronic Devices and Semiconductor Manufacturing Commons^™

Robust Hardware Trojan Detection Leveraging Dual‑Domain Features And Stacked Ensemble Learning, Sefatun-Noor Puspa

All Theses

In Cyber-physical systems rely on sensors, communication, and computing, all powered by integrated circuits (ICs). These ICs are vulnerable to malicious hardware attacks, with hardware Trojans being one of the stealthiest threats. Trojans are malicious implants in the circuitry, which are often inserted during design or fabrication stages. This stealthy addition remains dormant until triggered and might cause functional disruptions or sensitive information leakage once triggered. Traditional IC validation methods, such as functional testing and logic analysis, usually fail to capture these subtle anomalies because hardware Trojans are intentionally designed to mimic normal circuit behavior. They often remain dormant under …

Nanomagnet Based Reservoir Computing And Quantum Control, Fahim F. Chowdhury

Theses and Dissertations

Conventional CMOS scaling has driven remarkable advances in computing but faces increasing physical and energy constraints, motivating alternative computing paradigms that integrate memory and computation while improving energy efficiency. Nanoscale magnetic systems offer a promising platform for such approaches because their intrinsic nonlinear dynamics and localized magnetic fields can support both classical and quantum information processing. This thesis investigates nanomagnetic systems for physical reservoir computing and, with primary emphasis, for localized quantum control of spin qubits.

The first part explores dipole-coupled nanomagnet arrays as physical reservoirs. Micromagnetic simulations demonstrate nonlinear dynamical behavior with high short-term memory and parity-check capacity, enabling …

Reinventing Integrated Photonic Devices And Circuits For High Performance Communication And Computing Applications, Venkata Sai Praneeth Karempudi

Theses and Dissertations--Electrical and Computer Engineering

The long-standing technological pillars for computing systems evolution, namely Moore's law and Von Neumann architecture, are breaking down under the pressure of meeting the capacity and energy efficiency demands of computing and communication architectures that are designed to process modern data-centric applications related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In response, both industry and academia have turned to 'more-than-Moore' technologies for realizing hardware architectures for communication and computing. Fortunately, Silicon Photonics (SiPh) has emerged as one highly promising ‘more-than-Moore’ technology. Recent progress has enabled SiPh-based interconnects to outperform traditional electrical interconnects, offering advantages like high bandwidth density, …

Amorphous Boron Carbide-Amorphous Silicon Heterojunction Devices, Vojislav Medic

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation will show successful development and characterization of amorphous boron carbide-amorphous silicon heterojunction device with potential for neutron detection. The amorphous hydrogenated boron carbide (a-BC:H) has been extensively researched as a semiconductor for neutron voltaic device fabrication. Naturally occurring boron contains 19.8% of boron isotope B¹⁰ that has a high absorption cross section of thermal neutrons at lower energies, and boron carbide contains 14.7% of that B¹⁰ isotope. Therefore, as a semiconductor compound of boron a-BC:H has the ability to absorb radiation, generate charge carriers, and collect those carriers. Previous work on a-BC:H devices investigated the fabrication …

Dynamic Mechanism Of Science Based Technological Innovation And Industrial Evolution—Take Semiconductor, Digital Computer And Radio Technologies As Examples, Yi Zhang, Qiang Yan

Bulletin of Chinese Academy of Sciences (Chinese Version)

By studying the technological innovation and industrial development process of semiconductor, digital computer and radio, this study analyzes the path, conditions and force of science-based technological innovation and its industrialization, establishes a chain reaction model of large-scale technological innovation and diffusion, and compares it with market-based technological innovation. It is found that the large-scale aggregation of scientific research institutions and industrial laboratories accelerates the speed of technological innovation, and diffuses along two paths of scientific research institutions to enterprises and enterprises to enterprises, forming a chain reaction of large-scale technological innovation. Strategic demand is the basic driving force for the …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Redefining Research In Nanotechnology Simulations: A New Approach To Data Caching And Analysis, Darin Tsai, Alan Zhang, Aloysius Rebeiro

The Journal of Purdue Undergraduate Research

No abstract provided.

Improving Noise Immunity And Efficiency Using High-Precision Iterative Codes, Sherzod Shukhratovich Atadjanov, Aziza Ahmadjanovna Tursunova

Bulletin of TUIT: Management and Communication Technologies

The article discusses the issues of ensuring noise immunity in digital broadcasting systems, shows the importance of the transition to the optimal code and the need to use it in the field of noiseless coding in various areas of telecommunication transmission and reception of digital signals. The previous algorithms and error-correcting coding methods based on the Gray code, which are used in multi-level digital broadcast modulation schemes to minimize the intensity of bit errors, are highlighted. A model of error-correcting coding by the Gray method and methods for estimating the probability of error for the Gray code are presented. Based …

Malicious Hardware & Its Effects On Industry, Gustavo Perez

Computer Science and Computer Engineering Undergraduate Honors Theses

In recent years advancements have been made in computer hardware security to circumnavigate the threat of malicious hardware. Threats come in several forms during the development and overall life cycle of computer hardware and I aim to highlight those key points. I will illustrate the various ways in which attackers exploit flaws in a chip design, or how malicious parties take advantage of the many steps required to design and fabricate hardware. Due to these exploits, the industry and consumers have suffered damages in the form of financial loss, physical harm, breaches of personal data, and a multitude of other …

Treated Hfo2 Based Rram Devices With Ru, Tan, Tin As Top Electrode For In-Memory Computing Hardware, Yuvraj Dineshkumar Patel

Theses

The scalability and power efficiency of the conventional CMOS technology is steadily coming to a halt due to increasing problems and challenges in fabrication technology. Many non-volatile memory devices have emerged recently to meet the scaling challenges. Memory devices such as RRAMs or ReRAM (Resistive Random-Access Memory) have proved to be a promising candidate for analog in memory computing applications related to inference and learning in artificial intelligence. A RRAM cell has a MIM (Metal insulator metal) structure that exhibits reversible resistive switching on application of positive or negative voltage. But detailed studies on the power consumption, repeatability and retention …

System And Method For Object Recognition Based Estimation Of Planogram Compliance, Pranoy Hari, Shilpa Yadukumar Rao, Rajashree Ramakrishnan, Avishek Kumar Shaw, Archan Ray, Nishant Kumar, Dipti Prasad Mukherjee

Patents

Object recognition-based estimation of planogram compliance provides an expected arrangement of products on shelves. Identifying whether a product is placed in an appropriate location on a shelf is a challenging task due to various real-time parameters associated with image capturing. In the present disclosure, an input image associated with a shelf of a retail store is received and product images are cropped. Further, a set of reference images stored in a database are scaled corresponding to the input image. Further, one or more composite matching scores are calculated based on normalized cross-correlation and shape-based feature matching to obtain one or …

High Speed, High Current Monitoring System, Nicolette Lila Ray

Electrical Engineering

Electronics testing requires lengthy data collection and analysis. Streamlining at least part of this process allows resource reallocation, and faster data processing. Verifying a signal’s efficiency is key specification for a component’s datasheet. This project focuses on streamlining data collection when measuring a device’s output current. It combines amplifier design and digital interfacing to perform monitor a device’s output current. A computer-enable interface displays a graphical output current representation. It ensures accurate, high speed, high current measurements while removing a person’s need to manually plot data after testing. A new testing method provides room for company and product growth with …

Techno-Economic Analysis Of Diethyl Ether Production Via Catalytic Dehydration Of Ethanol, Boonraksa Chaiapha

Chulalongkorn University Theses and Dissertations (Chula ETD)

The major source of energy comes from non-renewable fuels, which have a non-sustainability and negative impact on the environment. Thus, there is change to renewable fuels as bioethanol. Diethyl ether (DEE) is a part of bioethanol. However, the increase of electric vehicles (EV) may decrease ethanol demand for biofuel in the future. Thus, it will be interesting in adding value to ethanol via the catalytic dehydration to produce DEE by conduct techno-economic analysis. Further, there is comparison on different concentrations of ethanol (93% and 95% ethanol) that affect DEE production. For simulation part, the DEE capacity of 3,600 tons/year is …

A Morphable Fpga Soft Processor Using Llvm Infrastructure Targeting Low-Power Application-Specific Embedded Systems, Ehsan Ali

Chulalongkorn University Theses and Dissertations (Chula ETD)

The reconfigurable computing (RC) aims to combine the flexibility of General-Purpose Processor (GPP) with performance of Application Specific Integrated Circuits (ASIC). There are several architectures proposed since RC's inception in 1960s, but all have failed to become mainstream. The main factor preventing RC to become common practice is its requirement for implementers of algorithms (programmers) to be familiar with hardware design. In RC, a hardened processor cooperates with a dynamic reconfigurable Hardware Accelerator (HA) which is implemented on Field-Programmable Gate Array (FPGA). The HA implements crucial software kernel on hardware to increase performance and its design demands digital circuit expertise. …

Prototyping A Capacitive Sensing Device For Gesture Recognition, Chenglong Lin

Computer Science and Computer Engineering Undergraduate Honors Theses

Capacitive sensing is a technology that can detect proximity and touch. It can also be utilized to measure position and acceleration of gesture motions. This technology has many applications, such as replacing mechanical buttons in a gaming device interface, detecting respiration rate without direct contact with the skin, and providing gesture sensing capability for rehabilitation devices. In this thesis, an approach to prototype a capacitive gesture sensing device using the Eagle PCB design software is demonstrated. In addition, this paper tested and evaluated the resulting prototype device, validating the effectiveness of the approach.

Energy Efficient Spintronic Device For Neuromorphic Computation, Md Ali Azam

Theses and Dissertations

Future computing will require significant development in new computing device paradigms. This is motivated by CMOS devices reaching their technological limits, the need for non-Von Neumann architectures as well as the energy constraints of wearable technologies and embedded processors. The first device proposal, an energy-efficient voltage-controlled domain wall device for implementing an artificial neuron and synapse is analyzed using micromagnetic modeling. By controlling the domain wall motion utilizing spin transfer or spin orbit torques in association with voltage generated strain control of perpendicular magnetic anisotropy in the presence of Dzyaloshinskii-Moriya interaction (DMI), different positions of the domain wall are realized …

Investigating The Effect Of Detecting And Mitigating A Ring Oscillator-Based Hardware Trojan, Lakshmi Ramakrishnan

Electrical Engineering Theses and Dissertations

The outsourcing of the manufacturing process of integrated circuits to fabrications plants all over the world has exposed these chips to several security threats, especially at the hardware level. There have been instances of malicious circuitry, such as backdoors, being added to circuits without the knowledge of the chip designers or vendors. Such threats could be immensely powerful and dangerous against confidentiality, among other vulnerabilities.

Defense mechanisms against such attacks have been probed and defense techniques have been developed. But with the passage of time, attack techniques have improved immensely as well. From directly observing the inputs or outputs, adversaries …

Improvement Of 802.11 Protocol On Fully Programmable Wireless Radio, Eunji Lee

Maseeh Summer Undergraduate Research Experience

The growth in the number of connected device usage has led to a rapidly increased data traffic on wireless network and the demand for access to high speed and stable Internet connection is becoming more prominent. However, current off the shelf wireless cards are not programmable or observable across layers of the standard protocol stack, which leads to poor practical performance. Thus, Wireless Open Access Research Platform (WARP), a scalable wireless platform providing programmable functionality at every layer of the network stack, has been used for the real-time implementation and improvement of 802.11 protocol.

An Exploration Of Software Defined Radio And Gnu Radio Companion For Use In Drone-To-Drone Communication, Amanda K. H. Voegtlin

Maseeh Summer Undergraduate Research Experience

In a world that increasingly relies on automation and intelligent robotics, there is a need for drones to expand their independence and adaptability in navigating their environments. One approach to this problem is the use of wireless communication between units in order to coordinate their sensor data and build real-time maps of the environments they are navigating. However, especially indoors, relying on a fixed transmission tower to provide data to the units faces connectivity challenges.

The purpose of this research was to determine the fitness of an on-drone assembly that uses the the NI B200mini software-defined radio board and Gnu …

An Analysis Of Lora Low Power Technology And Its Applications, Gomathy Venkata Krishnan

Maseeh Summer Undergraduate Research Experience

The number of Internet of Things (IoT) devices has exponentially increased in the last decade. With the increase in these devices, there is a necessity to effectively connect and control these devices remotely. Cellular technologies cannot handle this demand since they are not cost effective and easy to deploy. This is where LoRa technology comes handy. LoRa is long-range, low-power, low cost technology that supports internet of things applications. LoRa has many advantages in terms of capacity, mobility, battery lifetime and cost. It uses the unlicensed 915MHz ISM band and can be easily deployed.

This research is focused on setting …

Chaos-Based Cryptography For Cloud Computing, Paul Tobin, Lee Tobin, Michael Mckeever, Jonathan Blackledge

Conference papers

Cloud computing and poor security issues have quadrupled over the last six years and with the alleged presence of backdoors in common encryption ciphers, has created a need for personalising the encryption process by the client. In 2007, two Microsoft employees gave a presentation ``On the Possibility of a backdoor in the NIST SP800-90 Dual Elliptic Curve Pseudo Random Number Generators'' and was linked in 2013 by the New York Times with notes leaked by Edward Snowden. This confirmed backdoors were placed, allegedly, in a number of encryption systems by the National Security Agency, which if true creates an urgent …

Skin Effect Suppression In Infrared-Laser Irradiated Planar Multi-Walled Carbon Nanotube/Cu Conductors, Kamran Keramatnejad, Yang Gao, Yunshen Zhou, Hossein Rabiee Glogir, Mengmeng Wang, Yongfeng Lu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Skin effect suppression in planar multi-walled carbon nanotube (MWCNT)/Copper (Cu) conductors was realized at the 0-10 MHz frequency range through infrared laser irradiation of MWCNTs, which were coated on the surface of the Cu substrate via the electrophoretic deposition (EPD) method. The effect of laser irradiation and its power density on electrical and structural properties of the MWCNT/Cu conductors was investigated using a wavelength-tunable CO2 laser and then comparing the performance of the samples prepared at different conditions with that of pristine Cu. The irradiation at λ=9.219 μm proved to be effective in selective delivery of energy towards depths close …

Multiferroic Tunnel Junctions And Ferroelectric Control Of Magnetic State At Interface, Y. W. Yin, M. Raju, W. J. Hu, John D. Burton, Y.-M. Kim, A. Y. Borisevich, S. J. Pennycook, S. M. Yang, T. W. Noh, Alexei Gruverman, X. G. Li, Z. D. Zhang, Evgeny Y. Tsymbal, Qi Li

Alexei Gruverman Publications

As semiconductor devices reach ever smaller dimensions, the challenge of power dissipation and quantum effect place a serious limit on the future device scaling. Recently, a multiferroic tunnel junction (MFTJ) with a ferroelectric barrier sandwiched between two ferromagnetic electrodes has drawn enormous interest due to its potential applications not only in multi-level data storage but also in electric field controlled spintronics and nanoferronics. Here, we present our investigations on four-level resistance states, giant tunneling electroresistance (TER) due to interfacial magnetoelectric coupling, and ferroelectric control of spin polarized tunneling in MFTJs. Coexistence of large tunneling magnetoresistance and TER has been observed …

Ultraviolet Led Biofouling Mitigation, Andrew Lam

Computer Engineering

The goal is to determine if low-cost UV LEDs can mitigate marine biofouling on small glass or acrylic camera lenses. A microprocessor-controlled experimental setup to control the illumination of low-cost UV LEDs of various wavelength and packaging was fashioned. The system consists of a programmed microcontroller, a manufactured LED breakout interface, and a submergible UV LED array enclosed in a borosilicate glass tube. A preliminary qualitative assessment of four different UV LEDs was conducted during a three-week deployment of the experimental setup in the raw seawater system at the Cal Poly Center for Costal and Marine Sciences in Avila Beach, …

Mos Current Mode Logic (Mcml) Analysis For Quiet Digital Circuitry And Creation Of A Standard Cell Library For Reducing The Development Time Of Mixed Signal Chips, David Marusiak

Master's Theses

Many modern digital systems use forms of CMOS logical implementation due to the straight forward design nature of CMOS logic and minimal device area since CMOS uses fewer transistors than other logic families. To achieve high-performance requirements in mixed-signal chip development and quiet, noiseless circuitry, this thesis provides an alternative toCMOSin the form of MOS Current Mode Logic (MCML). MCML dissipates constant current and does not produce noise during value changing in a circuit CMOS circuits do. CMOS logical networks switch during clock ticks and with every device switching, noise is created on the supply and ground to deal with …

Using Software-Based Decision Procedures To Control Instruction-Level Execution, William B. Kimball

AFIT Patents

An apparatus, method and program product are provided for securing a computer system. A digital signature of an application is checked, which is loaded into a memory of the computer system configured to contain memory pages. In response to finding a valid digital signature, memory pages containing instructions of the application are set as executable and memory pages other than those containing instructions of the application are set as non-executable. Instructions in executable memory pages are executed. Instructions in non-executable memory pages are prevented from being executed. A page fault is generated in response to an attempt to execute an …

An Ant-Based Sensor Measurement Data Gathering System, Bolun Zhang, Dimitrios Peroulis

The Summer Undergraduate Research Fellowship (SURF) Symposium

Large-scale industries involved with a great amount of sensor measurements in their work are facing many challenges in data collection. Sensors are not on the same network; therefore each measurement has to be managed separately. Gathering all the measurement data to one terminal could be difficult. Once a measurement is obtained, it takes significant amount of time to process the data.The approaches our group takes here is to build a giant ANT wireless network that holds all the sensors’ measurements. To be more specific, every sensor has an ANT chip set up on its side. Each ANT chip is as …

Is Tech M&A Value-Additive?, Ani Deshmukh

Undergraduate Economic Review

Given rising M&A deal volume across all high-tech subsectors, the ability to measure post-acquisition performance becomes critical. Despite this growth, the relevant academic literature is severely lacking (Kohers and Kohers 2000). Using an event-study approach, I find that acquirers and targets both realize statistically significant day-0 abnormal returns (1.23% [p<0.1] and 8.1% [p<0.01], respectively). As positive stock returns signal positive growth prospects in a semi-strong efficient market, AR regressions found that firms' technological relatedness, deal financing, purchase price premiums, and the relative book to market ratio, explained most variance. Overall, high-tech transactions are value-additive for both targets and acquirers.

A Refreshable And Portable E-Braille System For The Blind And Visually Impaired, Mohammad Saadeh, Mohamed Trabia

College of Engineering: Graduate Celebration Programs

• Braille is a communication system to assist the blind and visually impaired.
• Present an approach to measure fingertip forces while identifying Braille characters.
• Implement a force sensory feedback in the device to measure the force developed on the fingertip.
• Introduce a preliminary design for the device.
• Build a prototype for the device and evaluate its functionality and integrate its components