Open Access. Powered by Scholars. Published by Universities.®
Electronic Devices and Semiconductor Manufacturing Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Publication
- Publication Type
- File Type
Articles 1 - 11 of 11
Full-Text Articles in Electronic Devices and Semiconductor Manufacturing
Very-Low-Specific-Resistance Pd/Ag/Au/Ti/Au Alloyed Ohmic Contact To P Gan For High-Current Devices, V. Adivarahan, A. Lunev, M. Asif Khan, J. Yang, Grigory Simin, M. S. Shur, R. Gaska
Very-Low-Specific-Resistance Pd/Ag/Au/Ti/Au Alloyed Ohmic Contact To P Gan For High-Current Devices, V. Adivarahan, A. Lunev, M. Asif Khan, J. Yang, Grigory Simin, M. S. Shur, R. Gaska
Grigory Simin
We report on Pd/Ag/Au/Ti/Au alloyed metallic contact to pGaN. An 800 °C anneal for 1 min in flowing nitrogen ambient produces an excellent ohmic contact with a specific contact resistivity close to 1×10−6 Ω cm2 and with good stability under high current operation conditions. This high-temperature anneal forms an alloy between Ag,Au, and pGaN resulting in a highly p-doped region at the interface. Using x-ray photoelectron spectroscopy and x-ray diffractionanalysis, we confirm that the contact formation mechanism is the metal intermixing and alloying with the semiconductor.
Algan/Gan Metal-Oxide-Semiconductor Heterostructure Field-Effect Transistors On Sic Substrates, M. Asif Khan, X. Hu, A. Tarakji, Grigory Simin, J. Yang, R. Gaska, M. S. Shur
Algan/Gan Metal-Oxide-Semiconductor Heterostructure Field-Effect Transistors On Sic Substrates, M. Asif Khan, X. Hu, A. Tarakji, Grigory Simin, J. Yang, R. Gaska, M. S. Shur
Grigory Simin
We report on AlGaN/GaN metal–oxide–semiconductor heterostructurefield-effect transistors (MOS-HFETs) grown over insulating 4H–SiC substrates. We demonstrate that the dc and microwave performance of the MOS-HFETs is superior to that of conventional AlGaN/GaN HFETs, which points to the high quality of SiO2/AlGaNheterointerface. The MOS-HFETs could operate at positive gate biases as high as +10 V that doubles the channel current as compared to conventional AlGaN/GaN HFETs of a similar design. The gate leakage current was more than six orders of magnitude smaller than that for the conventional AlGaN/GaN HFETs. The MOS-HFETs exhibited stable operation at elevated temperatures up to 300 °Cwith excellent …
Simulation Of Gallium Arsenide Electroluminescence Spectra In Avalanche Breakdown Using Self-Absorption And Recombination Models, David Kerns, Sherra Kerns, M Lahbabi, A Ahaitouf, E Abarkan, M Fliyou, A Hoffmann, J Charles, Bharat Bhuva
Simulation Of Gallium Arsenide Electroluminescence Spectra In Avalanche Breakdown Using Self-Absorption And Recombination Models, David Kerns, Sherra Kerns, M Lahbabi, A Ahaitouf, E Abarkan, M Fliyou, A Hoffmann, J Charles, Bharat Bhuva
Sherra E. Kerns
Light emission from gallium arsenide (GaAs) p–n junctions biased in avalanche breakdown have been modeled over the range of 1.4–3.4 eV. The model emphasizes direct and indirect recombination processes and bulk self-absorption. Comparisons between measured and simulated spectra for sample junctions from custom and commercially fabricated GaAs devices demonstrate that the model is simple, accurate, and consistent with fundamental physical device theory. The model also predicts the junction depth with accuracy.
Simulation Of Gallium Arsenide Electroluminescence Spectra In Avalanche Breakdown Using Self-Absorption And Recombination Models, David Kerns, Sherra Kerns, M Lahbabi, A Ahaitouf, E Abarkan, M Fliyou, A Hoffmann, J Charles, Bharat Bhuva
Simulation Of Gallium Arsenide Electroluminescence Spectra In Avalanche Breakdown Using Self-Absorption And Recombination Models, David Kerns, Sherra Kerns, M Lahbabi, A Ahaitouf, E Abarkan, M Fliyou, A Hoffmann, J Charles, Bharat Bhuva
David V. Kerns
Light emission from gallium arsenide (GaAs) p–n junctions biased in avalanche breakdown have been modeled over the range of 1.4–3.4 eV. The model emphasizes direct and indirect recombination processes and bulk self-absorption. Comparisons between measured and simulated spectra for sample junctions from custom and commercially fabricated GaAs devices demonstrate that the model is simple, accurate, and consistent with fundamental physical device theory. The model also predicts the junction depth with accuracy.
Very-Low-Specific-Resistance Pd/Ag/Au/Ti/Au Alloyed Ohmic Contact To P Gan For High-Current Devices, V. Adivarahan, A. Lunev, M. Asif Khan, J. Yang, Grigory Simin, M. S. Shur, R. Gaska
Very-Low-Specific-Resistance Pd/Ag/Au/Ti/Au Alloyed Ohmic Contact To P Gan For High-Current Devices, V. Adivarahan, A. Lunev, M. Asif Khan, J. Yang, Grigory Simin, M. S. Shur, R. Gaska
Faculty Publications
We report on Pd/Ag/Au/Ti/Au alloyed metallic contact to pGaN. An 800 °C anneal for 1 min in flowing nitrogen ambient produces an excellent ohmic contact with a specific contact resistivity close to 1×10−6 Ω cm2 and with good stability under high current operation conditions. This high-temperature anneal forms an alloy between Ag,Au, and pGaN resulting in a highly p-doped region at the interface. Using x-ray photoelectron spectroscopy and x-ray diffractionanalysis, we confirm that the contact formation mechanism is the metal intermixing and alloying with the semiconductor.
Algan/Gan Metal-Oxide-Semiconductor Heterostructure Field-Effect Transistors On Sic Substrates, M. Asif Khan, X. Hu, A. Tarakji, Grigory Simin, J. Yang, R. Gaska, M. S. Shur
Algan/Gan Metal-Oxide-Semiconductor Heterostructure Field-Effect Transistors On Sic Substrates, M. Asif Khan, X. Hu, A. Tarakji, Grigory Simin, J. Yang, R. Gaska, M. S. Shur
Faculty Publications
We report on AlGaN/GaN metal–oxide–semiconductor heterostructurefield-effect transistors (MOS-HFETs) grown over insulating 4H–SiC substrates. We demonstrate that the dc and microwave performance of the MOS-HFETs is superior to that of conventional AlGaN/GaN HFETs, which points to the high quality of SiO2/AlGaNheterointerface. The MOS-HFETs could operate at positive gate biases as high as +10 V that doubles the channel current as compared to conventional AlGaN/GaN HFETs of a similar design. The gate leakage current was more than six orders of magnitude smaller than that for the conventional AlGaN/GaN HFETs. The MOS-HFETs exhibited stable operation at elevated temperatures up to 300 …
Atomic Hydrogen Cleaning Of Inp(100) For Preparation Of A Negative Electron Affinity Photocathode, K. A. Elamrawi, M. A. Hafez, H. E. Elsayed-Ali
Atomic Hydrogen Cleaning Of Inp(100) For Preparation Of A Negative Electron Affinity Photocathode, K. A. Elamrawi, M. A. Hafez, H. E. Elsayed-Ali
Electrical & Computer Engineering Faculty Publications
Atomic hydrogen cleaning is used to clean InP(100) negative electron affinity photocathodes. Reflection high-energy electron diffraction patterns of reconstructed, phosphorus-stabilized, InP(100) surfaces are obtained after cleaning at ∼400 °C. These surfaces produce high quantum efficiency photocathodes (∼8.5%), in response to 632.8 nm light. Without atomic hydrogen cleaning, activation of InP to negative electron affinity requires heating to ∼530 °C. At this high temperature, phosphorus evaporates preferentially and a rough surface is obtained. These surfaces produce low quantum efficiency photocathodes (∼0.1%). The use of reflection high-energy electron diffraction to measure the thickness of the deposited cesium layer during activation by correlating …
Influence Of Copper Doping On The Performance Of Optically Controlled Gaas Switches, St. T. Ko, V. K. Lakdawala, K. H. Schoenbach, M. S. Mazzola
Influence Of Copper Doping On The Performance Of Optically Controlled Gaas Switches, St. T. Ko, V. K. Lakdawala, K. H. Schoenbach, M. S. Mazzola
Electrical & Computer Engineering Faculty Publications
The influence of the copper concentration in silicon-doped gallium arsenide on the photoionization and photoquenching of charge carriers was studied both experimentally and theoretically. The studies indicate that the compensation ratio (NCu/NSi) is an important parameter for the GaAs:Si:Cu switch systems with regard to the turn-on and turn-off performance. The optimum copper concentration for the use of GaAs:Si:Cu as an optically controlled closing and opening switch is determined.
Nanosecond Optical Quenching Of Photoconductivity In A Bulk Gaas Switch, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, S. T. Ko
Nanosecond Optical Quenching Of Photoconductivity In A Bulk Gaas Switch, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, S. T. Ko
Electrical & Computer Engineering Faculty Publications
Persistent photoconductivity in copper-compensated, silicon-doped semi-insulating gallium arsenide with a time constant as large as 30 µs has been excited by sub-band-gap laser radiation of photon energy greater than 1 eV. This photoconductivity has been quenched on a nanosecond time scale by laser radiation of photon energy less than 1 eV. The proven ability to turn the switch conductance on and off on command, and to scale the switch to high power could make this semiconductor material the basis of an optically controlled pulsed-power closing and opening switch.
Gaas Photoconductive Closing Switches With High Dark Resistance And Microsecond Conductivity Decay, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, R. Germer, G. M. Loubriel, F. J. Zutavern
Gaas Photoconductive Closing Switches With High Dark Resistance And Microsecond Conductivity Decay, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, R. Germer, G. M. Loubriel, F. J. Zutavern
Electrical & Computer Engineering Faculty Publications
Silicon-doped n-type gallium arsenide crystals, compensated with diffused copper, were studied with respect to their application as photoconductive, high-power closing switches. The attractive features of GaAs:Cu switches are their high dark resistivity, their efficient activation with Nd:YAG laser radiation, and their microsecond conductivity decay time constant. In the authors' experiment, electric fields are high as 19 kV/cm were switched, and current densities of up to 10 kA/cm2 were conducted through a closely compensated crystal. At field strengths greater than approximately 10 kV/cm, a voltage `lock-on' effect was observed.
An Optically Controlled Closing And Opening Semiconductor Switch, K. H. Schoenbach, V. K. Lakdawala, R. Germer, S. T. Ko
An Optically Controlled Closing And Opening Semiconductor Switch, K. H. Schoenbach, V. K. Lakdawala, R. Germer, S. T. Ko
Electrical & Computer Engineering Faculty Publications
A concept for a bulk semiconductor switch is presented, where the conductivity is increased and reduced, respectively, through illumination with light of different wavelengths. The increase in conductivity is accomplished by electron ionization from deep centers and generation of bound holes. The reduction of conductivity is obtained by hole ionization from the excited centers and subsequent recombination of free electrons and holes. The transient behavior of electron and hole density in a high power semiconductor (GaAs:Cu) switch is computed by means of a rate equation model. Changes in conductivity by five orders of magnitude can be obtained.