Polymer and Organic Materials Commons^™

The Fabrication And Properties Of Magnetorheological Elastomers Employing Bio-Inspired Dopamine Modified Carbonyl Iron Particles, Yanfen Zhou, Lele Li, Wenyue Li, Shipeng Wen, Liang Jiang, Stephen Jerrams, Jianwei Ma, Shaojuan Chen

Articles

To obtain magnetorheological elastomers (MREs) with improved mechanical properties and exhibiting an enhanced magnetorheological (MR) effect, bio-inspired dopamine modification has been used to improve the functionality at the surface of carbonyl iron (CI) particles. Various techniques including x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to confirm that a polydopamine (PDA) layer of about 27.5 nm had been successfully deposited on the surface of the carbonyl iron particles prior to their inclusion in the MRE composites. The magnetic properties of PDA modified CI particles were shown to be almost the same as those …

Influence Of Graphene Oxide And Carbon Nanotubes On The Fatigue Properties Of Silica/Styrene-Butadiene Rubber Composites Under Uniaxial And Multiaxial Cyclic Loading, Zongchao Xu, Stephen Jerrams, Hao Guo, Yanfen Zhou, Liang Jiang, Yangyang Gao, Liqun Zhang, Li Liu, Shipeng Wen

Articles

The influence of equivalent replacement of silica (SiO2) by carbon nanotubes (CNT) or graphene oxide (GO) on the microstructure, mechanical and fatigue behaviors of SiO2/styrene-butadiene rubber (SBR) composites was investigated. Results showed that the synergistic effect between CNT (or GO) and SiO2 was beneficial for the filler network and improved the mechanical properties of SBR composites. Furthermore, the introduction of CNT (or GO) led to low crack growth rates and the crack propagation tips were easy to deflection. Under multiaxial fatigue conditions, the maximum engineering stress was determined to be a reliable fatigue life predictor for SBR composites.

Enhanced Fatigue And Durability Of Carbon Black/Natural Rubber Composites Reinforced With Graphene Oxide And Carbon Nanotubes, Hao Guo, Stephen Jerrams, Zongchao Xu, Yanfen Shou, Liang Jiang, Liqun Zhang, Li Liu, Shipeng Wen

Articles

Graphene oxide (GO) sheets and carbon nanotubes (CNTs) are of nanometer size and offer large shape factors which are beneficial in reducing crack propagation rates of composites when used in carbon black (CB) reinforced natural rubber (NR), thereby prolonging the service lives of rubber composites. In this research, CNT-CB/NR and GO-CB/NR composites were prepared by partially replacing CB with one-dimensional CNTs and two-dimensional flaky graphene oxide GO, respectively. The results showed that the complex filler dispersion in NR matrices was improved due to the isolation effect between the different fillers. The strain-induced crystallization (SIC) ability of CB/NR was effectively enhanced …

Enhancement Of Absorptance By Ultrafast Laser Pulse Shaping For Efficient Laser Processing Of Thin Polymers, Arifur Rahaman

Electronic Theses and Dissertations, 2020-2023

Ultrashort-pulsed lasers have been used for high precision processing of a wide range of materials including dielectrics, semiconductors, metals, and polymers/polymer composites, enabling numerous applications ranging from micromachining, photonics to life sciences. However, there are challenges when applying this technology in the industry, which requires scale and throughput different from lab use. The goal of this research is to understand how ultrafast laser pulses interact with thin polymers/polymer composite materials and develop a method that is efficient for ultrafast laser processing of these materials. It is a common practice in industrial applications to run the laser at a high repetition …

Development Of Facile Microfabrication Technologies For The Fabrication And Characterization Of Multimodal Impedimetric, Plasmonic, And Electrophysiological Biosensors, Cacie Hart

Electronic Theses and Dissertations, 2020-2023

The objective of this dissertation was to develop novel methods of patterning inorganic and organic materials, develop biocompatibility evaluations, and subsequently apply these methods toward developing biosensors and lab-on-a-chip devices, such as Interdigitated Electrodes (IDEs) and Microelectrode Arrays (MEAs) on non-traditional (such as nanostructured and plasmonic) polymer substrates or deploy these methods to enhance precision cellular placement on traditional (glass) MEA substrates. It was hypothesized that a combination of such facile microfabrication techniques and patterning technologies on traditional and non-traditional substrates would increase the sensitivity and selectivity of such sensor platforms by several orders of magnitude, and potentially introduce new …

Development Of An Anatomically And Electrically Conductive Brain Phantom For Transcranial Magnetic Stimulation, Hamzah A. Magsood

Theses and Dissertations

Transcranial Magnetic Stimulation (TMS) is a non-invasive technique for diagnostics, prognostic, and treatments of various neurological diseases. However, the lack of anatomically realistic brain phantoms has made the experimental verification of stimulation strength in the form of induced electric fields/voltages in the brain tissues an impediment to developing new TMS coils, stimulators, and treatment protocols. There are significant technological, safety, and ethical limitations to test the potential TMS treatment procedures or develop enhancements and refine them on humans or animals. This work aims to bridge the gap by introducing and developing an innovative manufacturing and fabrications process to produce a …

Redox-Active Porous Organic Materials For Electrochemical Energy Storage Applications, K. Shamara Weeraratne

Theses and Dissertations

As the demand for renewable energy technologies grows, so does the need for cheaper, more efficient rechargeable batteries to store the energy. While lithium-ion battery (LIBs) technology is well established, it suffers from limited lithium supplies. Furthermore, the highly toxic transition metals used in the electrodes places a huge burden on the environment. Therefore, replacing lithium with more economical sodium metal in rechargeable batteries (i.e. sodium-ion batteries, SIBs) has garnered considerable attention. Despite the fact that sodium and lithium share similar electrochemical properties, which may cause the transition from lithium to sodium easier, the larger ionic radius of Na^{+ …}

Enhanced Gas Barrier Properties Of Graphene Oxide/Rubber Composites With Strong Interfaces Constructed By Graphene Oxide And Sulfur, Long Zheng, Stephen Jerrams, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen

Articles

Constructing strong interfacial interactions and complex filler networks is crucial to establishing high gas barrier properties in rubber composites. In this research, sulfur-graphene oxide (S-GO) hybrids were prepared by in situ growth of sulfur on the surfaces of GO sheets. The S-GO hybrids were also introduced into butadiene styrene rubber (SBR) using a green method of latex compounding. Results showed that sulfur could melt and spread on the surface of the GO during the crosslinking process at high temperatures. This process prevented the aggregation of GO and resulted in a fine dispersion of GO and complex filler networks in S-GO/SBR …

Enhanced Covalent Interface, Crosslinked Network And Gas Barrier Property Of Functionalized Graphene Oxide/Styrene-Butadiene Rubber Composites Triggered By Thiol-Ene Click Reaction, Long Zheng, Stephen Jerrams, Tian Su, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen

Articles

The high gas barrier property of a rubber composite is of great significance for reducing the exhaust gas emissions due to tire rolling resistance and hence the contribution this factor makes to environmental protection. Enhanced covalent interfaces and crosslinked networks are crucial to the gas barrier property of rubber composites. In this research, γ-mercaptopropyltriethoxysilane (MPS) modified GO (MGO)/styrene-butadiene rubber (SBR) composites were prepared by a synergetic strategy of latex compounding method and thiol-ene click reaction. It was found that the mercapto groups in MGO reacted with the vinyl groups in SBR molecules through thiol-ene click reaction during the crosslinking process …

Fabrication, Characterization And Applications Of Highly Conductive Wet-Spun Pedot:Pss Fibers, Ruben Sarabia Riquelme

Theses and Dissertations--Chemical and Materials Engineering

Smart electronic textiles cross conventional uses to include functionalities such as light emission, health monitoring, climate control, sensing, storage and conversion of energy, etc. New fibers and yarns that are electrically conductive and mechanically robust are needed as fundamental building blocks for these next generation textiles.

Conjugated polymers are promising candidates in the field of electronic textiles because they are made of earth-abundant, inexpensive elements, have good mechanical properties and flexibility, and can be processed using low-cost large-scale solution processing methods. Currently, the main method to fabricate electrically conductive fibers or yarns from conjugated polymers is the deposition of the …

Ab Initio Investigation On The Surface Chemistry Of Functionalized Titania Membranes, Evan Hyde

Theses and Dissertations--Chemical and Materials Engineering

Titania (titanium dioxide) is a metal oxide which has recently been investigated as a photocatalyst, most commonly for use in hydrolysis, which absorbs mostly in the UV range. However, the range of absorption can be shifted to fall within the visible light range either by doping or by functionalizing the surface with atomic or molecular adsorbates. Over the course of this research, a series of Density Functional Theory (DFT) calculations are performed to ascertain the effects of these different methods on the photocatalytic performance of titania. While the effects of nitrogen doping and oxygen vacancies are well known, more recent …

Electrophoresis In Heterogeneous Hydrogels And Applications In Surface Patterning, Ning Ge

Theses and Dissertations--Mechanical and Aerospace Engineering

The creation of chemical micropatterns on surfaces makes it possible to add unique chemical functionality to surfaces, modifying properties such as wettability, or even adding the ability to selectively bind other molecules. The creation of biochemical surface patterning in particular is useful in a variety of fields including tissue engineering and highthroughput drug screening. There are many existing surface patterning techniques which focus on precise control over the patterned geometry, even down to submicron scale features, but they do not allow local control over chemical concentration. So the results are high resolution patterns with binary concentration. There are also existing …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Sensitivity And Uncertainty Quantification Of Continuum And Stochastic Bond Dissociation Kinetics Based Cohesive Laws, Rishabh Awasthi

Dissertations, Master's Theses and Master's Reports

Polymeric adhesives are being extensively used to develop light weight and durable Composite Materials which are have been employed in automotive, aeronautical, medical industry. Polymeric adhesives undergo failure due to relative opening sliding of bonded interfaces which requires a need to characterize the fracture mechanism. Numerous experiments are conducted to predict the fracture response for Mode-I, II,III and numerical simulations are employed to inversely calibrate the material parameters governing the constitutive laws. Cohesive zone models are largely employed in fracture mechanics to predict failure of interfaces undergoing large plastic deformations. The objective of this report is to employ the cohesive …

Multiscale Modeling Of Carbon Fibers/Graphene Nanoplatelets/Epoxy Hybrid Composites For Aerospace Applications, Hashim Al Mahmud

Dissertations, Master's Theses and Master's Reports

Significant research effort has been dedicated for decades to improve the mechanical properties of aerospace polymer-based composite materials. Lightweight epoxy-based composite materials have increasingly replaced the comparatively heavy and expensive metal alloys used in aeronautical and aerospace structural components. In particular, carbon fibers (CF)/graphene nanoplatelets (GNP)/epoxy hybrid composites can be used for this purpose owing to their high specific stiffness and strength. Therefore, this work has been completed to design, predict, and optimize the effective mechanical properties of CF/GNP/epoxy composite materials at different length scales using a multiscale modeling approach. The work-flow of modeling involves a first step of using …

Virus Purification Framework And Enhancement In Aqueous Two-Phase System, Pratik Umesh Joshi

Dissertations, Master's Theses and Master's Reports

Viral infections regularly pose detrimental health risks to humans. Preventing viral infections through global immunization requires the production of large doses of vaccines. The increasing demand for vaccines, especially during pandemics such as COVID-19, has challenged current manufacturing strategy to develop advanced unit operations with high throughput capability. Over the decade, the upstream processing responsible for synthesizing viral products in cell cultures has shown significant success in yielding high titers of viruses and virus-like particles. The progress in the upstream stage has now shifted the bottleneck to the downstream processing (DSP). Overlooked for decades, the DSP responsible for viral product …

Impact Of Chain Architecture On The Thickness Dependence Of Physical Aging Rate Of Thin Polystyrene Films, Gregory Brown, Elizabeth Lewis, Bryan D. Vogt

Williams Honors College, Honors Research Projects

The dynamics of polymer thin films have been demonstrated to be significantly altered from the bulk, but the origins of such differences are not well defined. In this work, we seek to understand the differences in the structural dynamics (or physical aging) of polystyrene (PS) through branching and other well defined architectures (comb and centipede). The aging dynamics of ultrathin films (< 30 nm) differ from relatively thick films (100-150nm) with linear PS thin films aging more rapidly than the relatively “bulk-like” thick films. Ellipsometric measurements are used to characterize the physical aging rate of the films. The change in film thickness and refractive index as the films are held below the glass transition temperature (T_g) provides a simple measure of the physical aging. In this study, four different architectures (linear, comb, 4 arm star, and centipede) will be investigated. For each PS architecture, the aging rate will be determined for film …

A Foundational Approach To Extrusion And Compounding, David Frankart

Williams Honors College, Honors Research Projects

With a history of nearly 200 years, polymer processing and compounding is constantly changing to fit the material science needs of the era. Exposure of undergraduate students to the technology and practices used in industry today in a lab setting would create new opportunities for experiential learning and growth. The objective was to set up a 0.75”, 25 L/D Thermo Haake single screw extruder for lab use and run trials of material in a single screw extruder to set up a basis for experiments. Trials were run of co-polyester resin through a single screw extruder with carbon fiber additives varying …

Solvent-Free Coating Using Maco Bio-Based Reactive Diluent, Ryder James

Williams Honors College, Honors Research Projects

The project performed utilizes methacrylated cardanol (MACO) and a linseed oil resin to test how different weight percentages of MACO affect coating performance. MACO is synthesized from a phenolic lipid extracted from cashew nut shells, which are a cashew industry waste product. Not only does it utilize a waste product, but being a bio-based reactive diluent means it can replace the use of volatile organic solvents that are harmful to both humans and the environment. Weight percentage samples of 0%, 10%, 20%, 30%, and 40% were used. Coatings were applied using a 6-mil drawn down bar, with samples being prepared …

Nanostructured Metal Thin Films As Components Of Composite Membranes For Separations And Catalysis, Michael J. Detisch

Theses and Dissertations--Chemical and Materials Engineering

Novel metallic thin film composite membranes are synthesized and evaluated in this work for improved separations and catalysis capabilities. Advances in technology that allow for improved membrane performance in solvent separations are desirable for low molecular weight organic separation applications such as those in pharmaceutical industries. Additionally, the introduction of catalytic materials into membrane systems allow for optimization of complex processes in a single step. By adding a nanostructured metallic thin film to its surface, a polymer membrane may be modified to exhibit these improved properties. Using magnetron sputtering, thin metal films may be deposited on commercially available membranes to …

Interfaces In Lead-Free Tin Perovskite Photovoltaics: An Investigation Of Energetics, Ion Mobility, Surface Modification, And Performance, Alex Boehm

Theses and Dissertations--Chemistry

Halide perovskites have generated tremendous interest as low-cost semiconductors for optoelectronics, such as photovoltaics, lasers, and light emitting diodes due to their extraordinary optical and transport properties. Perovskite photovoltaics in particular have demonstrated a meteoric rise in power conversion efficiencies and drawn considerable interest as a next-generation solar energy technology. The rapid development has centered around lead-based derivatives, and concerns regarding the toxicity of lead has sparked interest in low toxicity and more environmentally friendly perovskite derivatives. In this regime tin (Sn) is regarded as a prominent alternative owing to the ideal bandgap and reduced toxicity exhibited by Sn-halide perovskites. …

A Theoretical And Experimental Study Of Charge Transport In Organic Thermoelectric Materials And Charge Transfer States In Organic Photovoltaics, Ashkan Abtahi

Theses and Dissertations--Physics and Astronomy

Applications of organic electronics have increased significantly over the past two decades. Organic semiconductors (OSC) can be used in mechanically flexible devices with potentially lower cost of fabrication than their inorganic counterparts, yet in many cases organic semiconductor-based devices suffer from lower performance and stability. Investigating the doping mechanism, charge transport, and charge transfer in such materials will allow us to address the parameters that limit performance and potentially resolve them. In this dissertation, organic materials are used in three different device structures to investigate charge transport and charge transfer. Chemically doped π-conjugated polymers are promising materials to be used …

Artificial Synthetic Scaffolds For Tissue Engineering Application Emphasizing The Role Of Biophysical Cues, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

The mechanotransduction of cells is the intrinsic ability of cells to convert the mechanical signals provided by the surrounding matrix and other cells into biochemical signals that affect several distinct processes such as tumorigenesis, wound healing, and organ formation. The use of biomaterials as an artificial scaffold for cell attachment, differentiation and proliferation provides a tool to modulate and understand the mechanotransduction pathways, develop better in vitro models and clinical remedies. The effect of topographical cues and stiffness was investigated in fibroblasts using polycaprolactone (PCL)- Polyaniline (PANI) based scaffolds that were fabricated using a self-assembly method and electrospinning. Through this …

The Study Of Chemical Induced Polyolefin-Based Ion Exchange Membrane For Electrodialysis Application, Di Huang

Dissertations, Master's Theses and Master's Reports

High-performance ion exchange membranes with high ion exchange capacity (IEC), excellent mechanical properties, lower membrane resistance and superior ions conductivity were developed with chemical-induced polymerization in this work. Through a series of synthesizing experiments, structure characterization and properties testing for polyolefin-based cation exchange membrane (CEM) and anion exchange membrane (AEM), LDPE proved to be an optimized backbone material. The CEM with 57.5% styrene, 38.4% LDPE, 3% crosslinking degree and 1% initiator addition yield the highest IEC value (1.72 mol/g) and moderate burst strength. The 10% addition of styrene was found to enhance IEC of 57% to AEM. However, continually increase …

Strengthening Of Corroded Steel Structures Using Cfrp – An Experimental Review, Ghada El-Mahdy Ph.D., P.Eng, Abdallah H. Yassin, Abdel El Rahman Khaled

Civil Engineering

Fibre reinforced polymers (FRP) have been widely used to strengthen reinforced concrete structures, however, nowadays their use to strengthen steel structures is under investigation. In particular, the need to strengthen corroded steel structures found in aggressive environments, such as marine environments, which have undergone a reduction in cross-sectional area and hence a reduction in their load-carrying capacity is in need of studying. The main problems that arise when using carbon fibre reinforced polymer (CFRP) sheets to strengthen steel structures is the weakness in the interfacial bond between the CFRP and the steel surface, the thinness of CFRP sheet, and the …

Ph-Sensitive Oxygen Release Microspheres To Enhance Cell Survival In Ischemic Condition, Zhongting Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Ischemic diseases such as myocardial infarction, stroke and limb ischemia are severe cardiovascular diseases with high rate of death and millions of people suffered from these diseases. Under ischemic environment, cells die due to deficient supply of nutrient and oxygen. To regenerate ischemic tissues, stem cell therapy is a promising approach because stem cells can differentiate into cells necessary for the regeneration. However, stem cell therapy has limitations. For example, few cells can survive under harsh ischemic environment. To enhance stem cells survival, implantation of oxygen release microspheres to sustained supply cells with oxygen represents an effective strategy. Previously, our …

Effect Of Incorporating Pottery And Bottom Ash As Partial Replacement Of Cement, Bassam A. Tayeh, Doha M. Alsaffar, Lawend K. Askar, Asmahan Issa Jubeh

Karbala International Journal of Modern Science

This study addressed the environmental constraints in cement produc­tion. Ordinary Portland cement (OPC) was replaced with pottery powder (PP, produced by grinding locally available pottery) and bottom ash (BA) at 10%, 20% and 30% of cement mass. Moreover, 4% calcium chloride solution (CaCl₂.2H₂O) was used as mixing water. Material properties, such as standard consistency, setting time and compressive strength, were measured with different percentages of OPC replacement with PP and BA. Results indicated that the replacement with PP and BA increased the water demand to achieve the standard consistency. These results revealed that the strength evolution …

Towards Completely Automated Glycan Synthesis, Matteo Panza

Dissertations

Carbohydrates are ubiquitous both in nature as biologically active compounds and in medicine as pharmaceuticals. Although there has been continued interest in the synthesis of carbohydrates, chemical methods require specialized knowledge and hence remain cumbersome. The need for development of rapid, efficient and operationally simple procedures has come to the fore. This dissertation focuses on the development of a fully automated platform that will enable both experts and non-specialists to perform the synthesis of glycans. Existing automated methods for the synthesis of oligosaccharides are highly sophisticated, operationally complex, and require significant user know-how. By contrast, high performance liquid chromatography (HPLC) …

Sorbents For Cleaning Of Vegetable Oils, Ikromov Oybek, Suvanova Fayoza, Farmonov Jasur

CHEMISTRY AND CHEMICAL ENGINEERING

The article presents the results of the study of adsorbents obtained from rice husk. To increase the sorption capacity of the raw material is treated with hydrogen peroxide for 30 minutes and subjected to roasting. Before thermal activation, the resulting mass was treated with a 30% alumium calcium alum solution. Reagent consumption is 20% of the mass of the adsorbent. The alum-enriched adsorbent is thermally activated at a temperature of 300-800 °C without oxygen access for two hours. According to the results of laboratory tests, the adsorbents that have undergone thermal activation at a temperature of 500-800 °C have the …

Development Of Environmentally Friendly Drilling Fluids In Order To Reduce The Anthropogenic Impact On The Environment, Arslanova Nodirakhon, Arslanov Sharafutdin, Zavorotnyy Vitaliy Leonidovich

CHEMISTRY AND CHEMICAL ENGINEERING

The article discusses natural clay as a raw material for drilling fluids of the oil and gas industry of the Republic of Uzbekistan. Studied compositions of clays from the Akoy and Navbakhor area (the Republic of Uzbekistan) and Tagansky area (Republic of Kazakhstan) were. Evaluated technological parameters of clay powders based on the original and modified explored clays. Were determined modifying additives (2.0% Na2CO3 and PAA 0.25%) to obtain low-toxic clay powders that do not have a technogenic impact on the environment during the drilling process. Calculations are confirmed by the results of bio-testing using standard methods based on the …