Polymer and Organic Materials Commons^™

Molecular Modeling Methods And Applications For Accelerating Polymerization And Pyrolysis Studies, Joshua D. Kemppainen

Dissertations, Master's Theses and Master's Reports

Polymer matrix composites and carbon-carbon composites play critical roles in the aerospace, automotive, and construction industries. Different matrix materials and processing conditions can lead to a large variety of composite materials and composite properties. Integrated computational materials engineering has been used to tailor PMC matrix materials and processing conditions to specific properties and manufacturing techniques. The integrated computational materials engineering process modeling framework uses molecular dynamics at the nanometer length scale to characterize the evolving thermo-mechanical properties of the polymer as it cures. Then finite element analysis is used at the micrometer length scale to adjust cure cycles to tailor …

Thermomechanical Analysis Of Biomass Plastic Composite (Bpc), Solomon Chijioke Madu, Victor Sunday Aigbodion, Ikechukwu Ike-Eze

Makara Journal of Technology

High-performance electrical insulation material can be manufactured using biomass plastic composite (BPC), which is a new type of composite material that is either made up of one or a combination of natural plant fibers/particulates, such as bamboo, cellulose fiber, rice husks, or hemp, and thermoplastic granules. In this study, the BPC composite material that was developed comprised polyethylene (PE), rice husk, and oyster shell. The results of the study showed a significant optimal improvement in the morphological, thermodynamic, and mechanical properties during the addition of 20% to 30% biomass particulates (i.e., rice husk and oyster shell). The thermogravimetric analysis, storage …

Investigating Features And Output Correlation Coefficient Of Natural Fiber-Reinforced Poly(Lactic Acid) Biocomposites, Andreas Federico, Siti Norasmah Surip, Wan Nor Raihan Wan Jaafar, Jaka Fajar Fatriansyah, Agrin Febrian Pradana

Journal of Materials Exploration and Findings

Polylactic acid (PLA) material has the potential to be applied in various industrial fields, but this material has shortcomings in terms of mechanical properties, especially mechanical strength, due to brittleness nature of PLA. The manufacture of PLA composite material with the addition of natural fibers as a reinforcing phase is one of the methods to increase the impact strength and maintain the biodegradable properties of the material. However, in theory, there are many factors that affect the mechanical properties of composite materials, thus making the mechanical properties of composites more complex than monolithic materials. The mechanical properties of these composite …

Void And Density Analysis Of Cyanate Ester Composites, Cameron B. Atwood

Materials Engineering

In large scale composite manufacturing, voids and their frequency within prepreg materials play an important role in predicting the mechanical properties of a final composite laminate. The industry standard process for determining voids in composite materials is through resin digestion and resin ignition via ASTM D3171. One limitation to this standard is its ability to frequently produce negative void volume values in quality control testing, due to the calculation sensitivity of input resin and fiber densities. For this reason, Toray Advanced Composites wanted to investigate the process steps of ASTM D3171 to determine if discrepancies in resin density data may …

High Enthalpy Storage Thermoset Network With Giant Stress And Energy Output In Rubbery State And Associated Applications, Jizhou Fan

LSU Doctoral Dissertations

In this study, a new shape memory thermoset network with giant stress and energy output in rubbery state is synthesized and studied firstly since the low output in stress and energy in rubbery state has been a bottleneck for wide-spread applications of thermoset shape memory polymers (SMPs). Traditionally, stress or energy storage in thermoset network is through entropy reduction by mechanical deformation or programming. We here report another mechanism for energy storage, which stores energy primarily through enthalpy increase by stretched bonds during programming. As compared to entropy-driven counterparts, which usually have a stable recovery stress from tenths to several …

Solution Casting And Mechanical Testing Of Arabinan-Cellulose Nanocomposites, Kevin Su, Alina Lusebrink

Materials Engineering

The purpose of this work was to investigate methods to produce consistent, reliable, and testable thin films of arabinan-cellulose nanocomposites. Mechanical properties and composition of the Opuntia ficus-indica cactus spines served as motivation for this research. The high specific strength and stiffness, biodegradability, and sustainability of these spines inspired the creation of composites fabricated from the same materials found in cactus spines: arabinan and nanocrystalline cellulose (NCC). Arabinan serves as the matrix material and NCC as the reinforcement. To explore the feasibility of using a non-toxic solvent, different solution casting techniques with water as a solvent were investigated. Ultrasonication was …

Manufacture And Mechanical Testing Of Thin Film Composites Composed Of Poly-Lactic Acid And Nanocrystalline Cellulose, Catherine E. Mohan

Materials Engineering

Society’s overuse of petroleum-based plastic products has created a waste problem that is threatening environments around the world. New efforts have been made to find a suitable replacement derived from a renewable source. Poly-lactic acid has become one of the front-runners in this search. It is derived from starches found in potatoes, corn, and other grains. There are many factors that make Poly-lactic acid-based polymers a suitable replacement for petroleum-based ones, but it still suffers from low mechanical strength due to low crystallinity percentages. Doping the polymer with nanocrystalline cellulose provides more nucleation sites for the crystallization of the polymer …

Characterization Of A Thin Film Composite Membrane: Fluorinated Copolymer In A Carbon Nanotube Matrix, Eric P. Bonaventure, Michael A. Brew, Cynthia R. Shannon

Materials Engineering

IDEX Health and Science has created a thin-film composite membrane consisting of a carbon nanotube matrix impregnated with a fluorinated copolymer called Teflon® AF 2400. This membrane is being studied for use in degassing chambers of analytical instruments such as a High Pressure Liquid Chromatography (HPLC) degassing modules. The level of impregnation of the Teflon® in the carbon matrix affects the diffusion properties which are crucial for the performance of the membrane. Scanning Electron Microscopy (SEM) characterization techniques were used to measure the outer Teflon® and the inner carbon matrix layer thickness. The outer Teflon® and inner carbon matrix layer …

An Investigation Of Arabinan And Cellulose Based Nano-Composite Fabrication Methods, Marianne Smithfield, Carl Petterson, Robert Miller

Materials Engineering

Microcrystalline cellulose was converted into nanocrystalline cellulose via an acid hydrolysis procedure. Scanning electron microscopy (SEM) was employed to measure the particle size and thus the effectiveness of acid hydrolysis. The nanocrystalline cellulose was poured through a 0.2μm filter to isolate the particles of ideal size. The nanocrystalline cellulose samples were stored in dimethylformamide (DMF) to prevent mold growth and agglomeration upon drying. Numerous composite samples were created by dissolving the arabinan in a solvent, suspending cellulose in the arabinan solution, and then drying the sample. Casting was performed in a silicon mold to allow sample removal without damage. Initial …

Biaxial & Twist Testing Of Composite Carbon-Fiber Sandwich Panels For Automotive Racing Vehicles, Erik Eckberg

Materials Engineering

Composite sandwich panels were constructed with 4-ply plain weave carbon-fiber/epoxy face sheets in the 0^o/45^o/0^o/45^o orientation and 1/8^th inch Nomex honeycomb core. The panels were cut into 5-inch square test plates for mechanical testing. All testing was done on a fixture designed and fabricated by Pratt & Miller Engineering and installed on an Instron testing system at Cal Poly. The twist test was performed by supporting diagonal corners of the plate while simultaneously loading the opposite two corners at a crosshead rate of .06 in/min (ASTM 3044-94R11). Out of 10 panels tested, …

Advanced Design Optimization For Composite Structure: Stress Reduction, Weight Decrease And Manufacturing Cost Savings, Shayan Ahmadian

Master's Theses

An injection moldable chopped fiber composite actuator with detailed drawing and tolerances was designed within one year. A vendor was selected and a quote for injection molding tooling cost for production was obtained and the first prototype was built in addition of six months. The risks are identified and material characterization tests are proposed.

The objective of this project was redesigning an aluminum made actuator with a continuous fiber composite for weight saving purposes. After searching the literature and consulting with experts in the field it was concluded that manufacturing costs associated with continuous fiber composite are 3 times as …

Cross-Linked Pdms Expansion Due To Submersion In Liquid And Supercritical Co2, Teng Yang

Graduate Theses and Dissertations

Characterization of micro/nano-copper particles impregnated Polydimethylsiloxane (PDMS) submersed in supercritical carbon dioxide (scCO2) was studied. The purpose of this investigation was to advance micro-corrosion sensor technology utilizing PDMS and micro-metal particle composite as the sensing element currently under-development. One of the key challenges encountered was the removal of the native oxides inherently existing on the metal particles. Numerous techniques were experimented with to counter this problem at the UA Engineered Micro/Nano Systems Laboratory (EMNSL), with swell-based protocols being identified as the most promising solution. In terms of compatibility to Micro-electro-mechanical Systems (MEMS) fabrication, CO2 is often used in the release …

Fiber Enhanced Viscoelastic Damping Polymers And Their Application To Passive Vibration Control, Houchun Xia

Mechanical & Aerospace Engineering Theses & Dissertations

A new composite damping material is investigated, which consists of a viscoelastic matrix and high elastic modulus fiber inclusions. This fiber enhanced viscoelastic damping polymer is intended to be applied to light-weight flexible structures as surface treatment for passive vibration control. A desirable packing geometry for the composite material is proposed, which is expected to produce maximum shear strain in the viscoelastic damping matrix. Subsequently, a micromechanical model is established in which the effect of fiber segment length and relative motion between neighboring fibers are taken into account. Based on this model, closed form expressions for the effective storage and …