Open Access. Powered by Scholars. Published by Universities.®

Polymer and Organic Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Student Works (2020-2029)

Articles 1 - 7 of 7

Full-Text Articles in Polymer and Organic Materials

Development Of Hybrid Self-Cleaning Coating Using Lanthanide-Based Light Spectral Response Material To Enhance Photovoltaic (Pv) Panel Efficiency In Operational Environment, Khishn Kumar Kandiah May 2026

Development Of Hybrid Self-Cleaning Coating Using Lanthanide-Based Light Spectral Response Material To Enhance Photovoltaic (Pv) Panel Efficiency In Operational Environment, Khishn Kumar Kandiah

Student Works (2020-2029)

The efficiency of photovoltaic (PV) panels is crucial, as solar energy has become an alternative energy source that meets today’s global energy demands. Hence, dust accumulation and spectral mismatch have major effects on the efficiency of PV panels, around 20 %, but in extreme situations, this can reach up to 64 %. Therefore, initiatives are underway to address these issues, including PV cooling systems, conventional cleaning methods, and various coatings to enhance efficiency. In this work, a novel coating is fabricated with high transparency, excellent self-cleaning properties, and good spectral-modifying properties. Two types of powder composites are employed in this …

Go to article

Radiation Modified Chitosan/Polyvinyl Alcohol Film With Polyvinyl Pyrrolidone Coating For Heavy Metal Ion Removal, Norhashidah Talip Nov 2020

Radiation Modified Chitosan/Polyvinyl Alcohol Film With Polyvinyl Pyrrolidone Coating For Heavy Metal Ion Removal, Norhashidah Talip

Student Works (2020-2029)

Chitosan (CS) / Polyvinyl Alcohol (PVA) films were obtained by solution casting method. To be used in the water treatment application, these film need to be improved in mechanical strength. In this study, 2% (w/v) chitosan and 5% (w/v) PVA were blend at different CS: PVA weight ratios (50:50, 70:30 and 90:10). These mixtures were then transformed into films by solution casting method. Mechanical properties of the films were evaluated using tensile strength test where, at 70:30 of CS: PVA ratio gave the best tensile strength. Therefore, this composition was selected to proceed with the radiation modification with Polyvinyl Pyrrolidone …

Go to article

Preparation And Characterisation Of Heat Treated Oil Palm-Empty Fruit Bunch/High Density Polyethylene Composites, Nordin Nur Afifah Sep 2020

Preparation And Characterisation Of Heat Treated Oil Palm-Empty Fruit Bunch/High Density Polyethylene Composites, Nordin Nur Afifah

Student Works (2020-2029)

Natural fibre composites (NFCs) are composite materials, in which the reinforcing fibres are derived from renewable and carbon dioxide neutral resources such as wood or plants. NFC can be made by replacing synthetic fibres with various types of natural fibres. Oil palm empty fruit bunch (OPEFB) fibre and oil palm mesocarp fibre are two important types of fibrous materials left in the palm-oil industry. In this study, EFB will be used as a reinforcement to the high-density polyethylene (HDPE). EFB was heat-treated at 180°C using vacuum oven for one hour, extrusion compounded with HDPE at 10%, 20% and 30% weight …

Go to article

Alumina Ceramic Membrane Incorporated With Graphene Oxide Frameworks For Protein Recovery, Ishak Noor Fauziyah Aug 2020

Alumina Ceramic Membrane Incorporated With Graphene Oxide Frameworks For Protein Recovery, Ishak Noor Fauziyah

Student Works (2020-2029)

Alumina ceramic membrane is undergoing rapid development and innovation for protein recovery process. However, the limitation of this membrane type is membrane fouling due to the deposition and adsorption of proteins on the surface and pore walls of the membranes. It is crucial to minimize membrane fouling by reducing interactions between protein and the membrane surface via surface modification technique. Thus, the main objective of this research is to develop an alumina membrane with enhanced antifouling property for protein recovery process. An alumina dope consisting of 57 wt.% alumina loading was used to fabricate two alumina membrane configurations; which are …

Go to article

Synthesis And Characterization Of Porous Carbon Composite Derived From Biomass Waste For Supercapacitor Application, Cheng Kim Sim Jun 2020

Synthesis And Characterization Of Porous Carbon Composite Derived From Biomass Waste For Supercapacitor Application, Cheng Kim Sim

Student Works (2020-2029)

Energy storage devices have gradually dominated human daily activities and indispensable to economy development such as supercapacitor and battery. There are few factors determining the performance of supercapacitor and active material is one of the crucial. Therefore, biomass such as pineapple peel (PP) and green waste (GW) were preferred and prior mixed with manganese and tin carbonate to synthesize carbon composite (PP/GW-ZMO and PP/GW-ZTO) via combustion. Brunauer–Emmett–Teller (BET) was employed to study the textural properties with the highest specific surface area obtained in PP-C (1765.92 m2g-1) and GW-C (1613.92 m2g-1). The existence of composite materials was examined using x-ray diffraction …

Go to article

Poly(Vinyl Alcohol)/Α-Chitin/Nanocellulose Composites Developed From Oil Palm Empty Fruit Bunch (Opefb) For Removal Of Cationic Dyes, Chun Fah Mok Apr 2020

Poly(Vinyl Alcohol)/Α-Chitin/Nanocellulose Composites Developed From Oil Palm Empty Fruit Bunch (Opefb) For Removal Of Cationic Dyes, Chun Fah Mok

Student Works (2020-2029)

In search of an eco-friendly polymeric adsorbent for dye effluent treatment application, poly(vinyl alcohol) (PVA)/chitin/nanocellulose composites were synthesized. The composites were reinforced by oil palm empty fruit bunch fibers (OPEFB)-derived nanocrystalline cellulose (NCC). With addition of 1 wt.% NCC, a maximum improvement of 57.64% and 50.66% in tensile strength and Young’s Modulus were achieved, respectively. However, the PVA-based composites exhibited low resistance in aqueous medium. Hence, maleic acid (MA) was incorporated, in view of modifying PVA-based composites through cross-linking reactions. The effect of varying chitin content (10 wt.%-30 wt.%) and MA content (10%-50% based on total solid content of composite) …

Go to article

Dry And Wet Torrefaction Of Microalgal Biomass For Biochar Production As Bioenergy Sources, Yong Yang Gan Feb 2020

Dry And Wet Torrefaction Of Microalgal Biomass For Biochar Production As Bioenergy Sources, Yong Yang Gan

Student Works (2020-2029)

Increasing population in global and living standards have risen the consumption of global energy. Thermochemical conversion approaches hold great potential for the biomass conversion into energy applications. Among these approaches, torrefaction is a promising technique to enhance the biomass properties, making it more practical and suitable in biofuel applications. In this study, two different species of microalgae (third generation biofuel feedstock) including Chlorella vulgaris ESP-31 and FSP-E were used as feedstocks for dry and wet torrefaction. Dry torrefaction of microalgae was performed at temperatures of 200, 250 and 300 ºC, and holding times of 15, 30, 45 and 60 min, …

Go to article