Polymer and Organic Materials Commons^™

Engineering Silicone Magnetic Fluids For Localized Radiation Attenuation During Ocular Melanoma Brachytherapy, Zachary L. Caprow

All Dissertations

Ocular melanoma is commonly treated using plaque brachytherapy; however, radiation-induced damage to healthy ocular tissues frequently results in partial or complete vision loss. This work investigates the development of an injectable, magnetically responsive silicone magnetic fluid designed to localize adjacent to the tumor and attenuate low-energy gamma radiation during treatment.

The material system consists of iron oxide nanoparticles surface-functionalized with a siloxane polymer, in which the nanoparticles provide magnetic responsiveness and radiation attenuation, while the polymer coating ensures colloidal stability, injectability, and biocompatibility. A one-pot synthetic approach was developed wherein a functionalized siloxane polymer containing iron-affinitive groups was reacted with …

Polypropylene/Polyethylene Blends With Asymmetric Viscosity: Fabrication, Characterization, And Recycling Potential, Bernadine Daichendt

All Dissertations

Polyolefin materials, polypropylene (PP) and polyethylene (PE), are widely used in day-to-day life both commercially and industrially, offering versatile applications due to their mechanical and chemical properties. The high consumption rate of these materials makes them important targets for recycling efforts. However, there are multiple contributing factors leading to low recycling of PP and PE, chiefly sorting factors: chemical similarity, changed properties after multiple rounds of processing, and the use of processing aids. It is necessary to point out that, because of multiple melt processing cycles, recycled PP has decreased molecular weight due to chain scission. Conversely, recycled PE molecular …

Synthesis And Characterization Of Chemically Recyclable Polypropylene-Based Covalent Adaptable Networks, Andrii Tiiara

All Dissertations

Polyolefins (POs) are inexpensive engineering materials with excellent physical and mechanical properties, accounting for nearly 60% of all thermoplastics. However, large-scale recycling remains limited, with only ~15% undergoing mechanical recovery. This dissertation addresses this challenge by fragmenting and functionalizing polypropylene (PP) chains to generate macromonomers and employing them, along with industrial reactive PP macromonomers, to synthesize, depolymerize, and repolymerize chemically recyclable polypropylene-based polyolefins (CR-POs). These CR-POs incorporate ester linkages that form covalent adaptable networks (CANs), maintaining a gel fraction of ~70% while remaining melt-reprocessable via extrusion and compression molding.

First, the fragmentation of PP is investigated by microwave irradiation. Microwave …

Effect Of Polymer Contaminants Sourced From Coated Paper On The Performance Of The Resulting Recycled Paper, Ezekiel J. Guevarra

All Theses

The growing demand for sustainable packaging has accelerated the use of paper-based materials as alternatives to plastics. To provide barrier and functional properties, these materials are often modified with polymer coatings. While beneficial during use, such coatings can persist as contaminants during recycling, potentially disrupting fiber bonding and reducing the quality of recycled paper. This study examined the impact of extrusion-coated low-density polyethylene (LDPE) films and two aqueous dispersions (Vapor/Water-Barrier, Acrylic Film (VWAF) and Oil & Grease Barrier (OGBF)) on contaminant distribution and mechanical performance of recycled handsheets. Kraft paper coated at varying levels was repulped and formed into handsheets, …

Predicting Long-Term Creep Behavior Using Short-Term Stress Relaxation Data In Expanded Polyethylene Foam, Andrew M. Seelig

All Theses

Closed cell expanded polyethylene (EPE) foams are widely used for protective packaging due to their high energy absorption properties and recyclability. However, these foams can be subjected to sustained compressive stresses (13.78 - 36.20 kPa), depending on density and application, leading to time-dependent deformation (creep). Creep reduces cushioning performance, making its understanding critical for effective protective packaging. Two standards, ASTM D3575 and ASTM D2221, define methods for conducting compressive creep tests on foam materials, with test durations extending up to 1000 hours. Accelerated methods such as Time Temperature Superposition (TTS) and the Stepped Isostress Method (SSM) have been explored for …

Self-Poled P(Vdf-Trfe) Based Composites For Energy Harvesting And Wearable Sensor Applications, Lavanya Muthusamy

All Dissertations

The growing demand for flexible, low-power, and self-powered wearable electronic systems has accelerated research interest in polymer-based sensors and energy harvesting technologies. Among piezoelectric polymer materials, Poly(vinylidene fluoride-trifluoro ethylene) [P(VDF-TrFE)], over the years, has garnered significant attention due to its unique piezoelectric properties, high dielectric constant, mechanical flexibility, thermal stability, chemical resistance, biocompatibility and compatibility with scalable fabrication processes. Despite its advantages, conventional P(VDF-TrFE)-based devices often require external poling and face limitations in integration with low-cost, flexible substrates. To overcome these limitations, this research study explores the nanofiller approach, along with facile fabrication processes, and structural design strategies aimed at …

Designing Self-Healable Aromatic Copolymers And Olefinic Composites, Samruddhi Yashwant Gaikwad

All Dissertations

Self-healing polymers capable of recovering from mechanical damage are promising materials for advanced applications, especially those involving mechanical and/or physical fatigue. In these studies, we have developed techniques to achieve autonomous self-healing in commodity Styrene/n-butyl acrylate copolymers. The mechanism of self-healing in the designed polymers involves inter-and/or intrachain non-covalent interactions between π-cloud and polar linkages of acrylic nBA in random/preferentially alternating copolymers. A combination of spectroscopic tools, thermo-mechanical analysis, and molecular dynamics (MD) simulations has been used to elucidate the mechanism of self-healing. These studies further show the incorporation of dipolar C-F groups to understand the effect of having fluorinated …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

Fabrication And Characterization Of Lignin–Pva Hydrogels With Tunable Network Structures, Keturah Bethel

All Dissertations

The ability to directly tune the crosslinked network structure of hydrogels is crucial for their functional applications in various fields, such as water filtration, protein separation, and tissue engineering. By controlling the crosslink density of the hydrogel, one can directly alter the mesh size – i.e., the end-to-end distance between crosslink junctions – and, subsequently, directly alter the hydrogel performance. This work discusses the fabrication and characterization of soft composites containing the biopolymer, lignin, are discussed. Precisely, physically-crosslinked composite lignin–Poly(vinyl alcohol) (PVA) hydrogels were fabricated via the freeze-thaw (F/T) pathway, whereby solutions containing specified amounts of PVA and lignin were …

Exploring The Synthesis Of Biobased And Chemically Recyclable Polysulfone Using Imine Chemistry, Vitasta Jain

All Dissertations

Plastic waste poses a major problem because of the chemical stability of these materials, leading to their accumulation in the environment and the leaching of toxic chemicals during their slow decomposition. Additionally, the use of depleting petroleum reserves for synthesis has made for an unsustainable production and risks due to use of chemicals hazardous to the environment and the individuals exposed to it.

To address these concerns, researchers have explored biobased feedstock and incorporating chemical recycling capabilities for a closed loop, sustainable process. One promising feedstock is lignin with its abundant functional groups that can be modified and utilized to …

Physics-Informed Machine Learning Methods For Inverse Design Of Multi-Phase Materials With Targeted Mechanical Properties, Yunpeng Wu

All Dissertations

Advances in machine learning algorithms and applications have significantly enhanced engineering inverse design capabilities. This work focuses on the machine learning-based inverse design of material microstructures with targeted linear and nonlinear mechanical properties. It involves developing and applying predictive and generative physics-informed neural networks for both 2D and 3D multiphase materials.

The first investigation aims to develop a machine learning method for the inverse design of 2D multiphase materials, particularly porous materials. We first develop machine learning methods to understand the implicit relationship between a material's microstructure and its mechanical behavior. Specifically, we use ResNet-based models to predict the elastic …

Release Of Small Molecules From Rubber: Effects Of Materials Properties, Mechanical Loading And Molecular Interactions, Yongcan Du

All Dissertations

Release of small molecules from polymeric materials has wide applications in the delivery systems of active molecules such as drug, fragrance, and semiochemical. Rubber materials are good candidates for the excipients of those systems due to properties such as good flexibility, permeability, and biocompatibility. Factors like material properties, mechanical loading, and molecular interactions may affect the release of small molecules in those systems. Therefore, understanding how those factors affect the release is key to the formulation, design, and evaluation of those systems.

To study the effects of materials properties, vulcanized natural rubber sheets with different crosslink densities, loaded with small …

Green Chemistry Design Of Epoxies From Biomass For Circular Economy, Kavya Ganesan

All Dissertations

The commercial epoxies market in automobiles has been growing mainly in terms of usage as automotive coatings and lightweight composite structures manufacturing. Most of these commercial epoxies are bisphenol-based. Bisphenol-based epoxies are a class of high-performance polymer materials that, when cured, yield thermosets with high mechanical, thermal and chemical resistance properties. Roughly, North America produces around 123 billion pounds of these epoxies which are used in various industrial applications like coatings, composites, structural parts, automotive, electronics, construction etc. These epoxies are mainly manufactured from bisphenol-A (BPA) and epichlorohydrin (EPH). These raw materials are sourced from fossil fuel resources and are …

Additive Manufacturing With Bioresorbable Polymers: Process-Structure-Property Relationships For Biomimetic Tissue Scaffolds, Clayton Joseph Culbreath

All Dissertations

Tissue engineering has a base requirement of scaffold structures to support cell growth, proliferation, and regeneration. However, attempts to use artificial scaffold structures have often fallen short of clinical needs to justify the change away from the established, biologic-based current standard of care. Based on the limited number of successful tissue scaffolds produced by material extrusion modes of additive manufacturing, fused filament 3d printing and electrospinning, critical design specifications for a tissue scaffold are six minimum requirements: 1) biocompatibility, 2) porosity, 3) mechanical properties, 4) bioresorbable medical grade materials, 5) bioactivity, and 6) appropriately scaled production methods compliant with medical …

Crystalline Colloidal Arrays: Exploring Light-Matter Interactions, Haley W. Jones

All Dissertations

Understanding and manipulating quantum light-matter interactions, especially in the context of nanostructured environments, is highly critical for technological progress and inventive solutions in the fields of telecommunications, energy-efficient lighting, and cutting-edge quantum computing technologies. The fundamental interactions of photons with a surrounding environment directly impact the performance and efficiency of devices such as lasers, light-emitting diodes (LEDs), and quantum computing elements, which leverage the unique properties of confined structured environments. Since the late 1980s, the connection between a structured environment and the decay kinetics of an embedded fluorophore has been a highly debated and unresolved topic in the literature. More …

Process-Structure-Property-Performance Modeling For Semicrystalline Thermoplastics And Composites, Tatiana Stepanova

All Dissertations

With a growing focus on reducing the adverse effects of transportation on the environment, industries are seeking fuel-efficient and sustainable solutions. Fuel efficiency can be improved in several ways, but structural lightweighting has demonstrated overall effectiveness. In this regard, thermoplastic composites and additive manufacturing (AM) thermoplastics have become viable candidates for use in the automotive industry, given the need for weight reduction and efficiency improvement.

The advantages of AM include simplifying supply chains, simplifying part geometry, and enabling mass customization. In order to design high-performance AM structures, extensive modeling and simulation are required. AM thermoplastics are similar to conventional manufacturing …

A Manufacturing-To-Response Pathway For Manufacturing Optimization Of Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Dissertations

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …

Investigation Of Domain Formation During Phase Separation In A Mixture Of Flexible And Rigid Biopolymers, Steven Huntley

All Theses

Complex fluids and heterogenous mixtures composed of multiple types of polymers are found throughout industrial and biological fluid systems. For example, extrusion based additive manufacturing systems pass dense mixtures of polymers through the extrusion heads to deposit composite polymeric materials. In cells, active and complex mixtures of biopolymers self-organize into assemblies that perform critical physiological functions.

Polymers in dense solutions undergo phase separation as a result of differences in physiochemical properties. A few examples of these properties include charge, structure, rigidity, and hydrophobicity. We observe the formation of polymer domains composed of rigid and a flexible biopolymer species that phase …

Cfrp Delamination Density Propagation Analysis By Magnetostriction Theory, Brandon Eugene Williams

All Dissertations

While Carbon Fiber Reinforced Polymers (CFRPs) have exceptional mechanical properties concerning their overall weight, their failure profile in demanding high-stress environments raises reliability concerns in structural applications. Two crucial limiting factors in CFRP reliability are low-strain material degradation and low fracture toughness. Due to CFRP’s low strain degradation characteristics, a wide variety of interlaminar damage can be sustained without any appreciable change to the physical structure itself. This damage suffered by the energy transfer from high- stress levels appears in the form of microporosity, crazes, microcracks, and delamination in the matrix material before any severe laminate damage is observed. This …

Glass Bubbles Grafted With Polymer Brushes For Liquid Hydrocarbon Fire Extinguishment, Randall Snipes

All Dissertations

The current most efficient solution to fighting liquid pool fires involves the use of firefighting foams containing fluorinated surfactants. The physiochemical properties of these foams are considerably different to all other currently available firefighting foams. Fluorinated surfactants lower the surface tension to a point where the foam solution draining from the foam structure forms a continuous aqueous film on the surface of a volatile hydrocarbon fuel, adding an additional barrier to fuel vapor diffusion to the burning fire. For this reason, these foams qualify as aqueous film forming foams (AFFFs). However, fluorinated compounds are extremely harmful for the environment due …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

Carbon Fibers From Athabasca Oil-Sand Asphaltenes, Blake Reardon

All Theses

Carbon fibers possess ultra-high specific strength and modulus. Therefore, the material is popular in aerospace, automotive, and sports industries. Approximately 95% of all carbon fibers are spun from a high-cost precursor, polyacrylonitrile (PAN). There is a need for a cheaper grade of carbon fiber for low-cost applications because about half of carbon fiber cost is associated with precursor cost. A promising alternative to the high-cost PAN precursor is petroleum-based asphaltene. Asphaltenes are highly aromatic and have a high carbon content but lack the purity of the PAN precursor. Processes like the molten- sodium desulfurization upgrading have been used to harvest …

Life Cycle Energy Assesment Of Advanced Fiber Reinforced Composite Design And Manufacturing Methodologies, Urjit Lad

All Theses

Automotive industry at large is focused on vehicle light-weighting since a 6%-8% increase in fuel efficiency can be achieved with a 10% reduction in vehicle weight [1]. With the growing demand for cost-effective and sustainable light weighting of automobile structures, interest has increased in the application of fiber reinforced plastic (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used for marine and aerospace applications. However, these …

Elucidating The Mechanical And Transport Properties Of Lignin-Based Hydrogel Composites, Nicholas Gregorich

All Dissertations

The use of lignin in the fabrication of soft composites has become an emerging area of research in polymer science and polymer chemistry. These lignin-based materials present numerous benefits, notably, a reduction in the use of petroleum-based precursor, improved structural benefits to otherwise soft host polymers, as well as the inherent antimicrobial and antioxidant properties of lignin, making it suitable for biomaterials. Herein, we present two chemical reaction pathways of incorporating lignin that was fractionated and cleaned using the Aqueous Lignin Purification with Hot Agents (ALPHA) process into poly(vinyl alcohol) (PVA) hydrogel composites for aqueous-based separations. By leveraging the ALPHA …

Mesoscale Modeling Of Controlled Degradation In Polymer Networks And Melts, Vaibhav Palkar

All Dissertations

Controlled degradation of polymers finds various applications in fields ranging from the design of functional soft materials to recycling of polymers. In several of these applications, the characteristic length scale at which relevant processes occur ranges from nanometers to microns, typically referred to as the mesoscale. Although analytical models and continuum approaches inform our current understanding, analysis of degradation at the mesoscale is exceptionally limited. For modeling degradation at the mesoscale, we use the Dissipative Particle Dynamics (DPD) technique and the LAMMPS simulation software. Within the DPD framework, we model controlled degradation or the breaking of covalent bonds within a …

Design, Fabrication, And Characterization Of Conjugated Polymeric Electrochemical Memristors As Neuromorphic/Integrated Circuits, Benjamin Grant

All Dissertations

Organic materials are promising candidates for future electronic devices compared to the complementing inorganic materials due to their ease of processability, use, and disposal, low cost of fabrication, energy efficiency, and flexible nature toward implementation as flexible and non-conformal devices.With that in mind, electrochemical materials have been widely demonstrated with commercial use as sensors, displays, and a variety of other electronic devices. As Moore's law predicts the increase in the density of transistors on a chip, the requirement to create either smaller transistors or the replacement of the transistor device entirely is apparent. Memory resistors, coined ``memristor", are variable resistive …

Enhancing The Performance Of Poly(3-Hexylthiophene) Based Organic Thin-Film Transistors Using An Interface Engineering Method, Eyob Negussie Tarekegn

All Dissertations

An original design and photolithographic fabrication process for poly(3-hexylthiophene-2, 5-diyl) (P3HT) based organic thin-film transistors (OTFTs) is presented. The structure of the transistors was based on the bottom gate bottom contact OTFT. The fabrication process was efficient, cost-effective, and relatively straightforward to implement. Current–voltage (I-V) measurements were performed to characterize the primary electronic properties of the transistors. The measured mobility of these transistors was significantly higher than most results reported in the literature for other similar bottom gate bottom contact P3HT OTFTs. The higher mobility is explained primarily by the effectiveness of the fabrication process in keeping the interfacial layers …

3d Printed Multicomponent Polymer Based Materials Via Hybrid Filaments: Fabrication And Characterization, Erik Antonio

All Dissertations

Additive manufacturing, also known as 3D printing, promises a manufacturing revolution for both industry and academic circles. One of the most widely used method of 3D printing is Fused Deposition Modeling (FDM) or Fused Filament Fabrication (FFF), which requires a thermoplastic filament to be directed towards a heating block and then deposited via extrusion layer by layer to produce a finished part. However, there are significant issues with this technology, mainly a limitation on the materials available for use and mechanical property deficiencies when compared to traditional manufacturing. These issues are brought about by the temperature limited nature of the …

Modeling Phase Behavior And Agglomeration In Polymer Systems Incorporating Complex Architectures: From Bottlebrush To Lysozyme, Sidong Tu

All Dissertations

Using computational modeling, we focus on the phase behavior of multicomponent systems incorporating enzyme and bottlebrush polymers where the agglomeration of multiple components occurs. We start with all-atom molecular dynamics (MD) simulations of lysozyme and polyethylene glycol (PEG) based polymer mixture to understand the mechanisms of preservation of lysozyme bioactivity at high temperatures with addition of PEG-derived bottlebrushes. We show that the PEG part of bottlebrushes phase separates at high temperature and shells the access of water to lysozyme, resulting in the preservation of lysozyme secondary structures. We then developed a coarse-grained model using a Dissipative Particle Dynamics approach to …

Modeling Pattern Formation And Morphology Development In Polymer Networks, Yao Xiong

All Dissertations

Topography and morphology have considerable impacts on the functionalities of soft materials in an entire range of applications from smart optics to tissue engineering. Adapting theoretical and computational approaches, we focus on the dynamics of pattern formation and morphology development in polymer networks. This dissertation starts with studying the dynamical control of pattern formation in confined thermo-responsive poly(N-isopropylacrylamide) (PNIPAAm) gel films. The patterns are formed due to mechanical instabilities. We perform a linear stability analysis and identify the limits of this analysis in predicting pattern formation in gels. We then study the restructuring between patterns and hysteresis phenomena …