Open Access. Powered by Scholars. Published by Universities.®

Polymer and Organic Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrospinning

Discipline
Institution
Publication Year
Publication
Publication Type

Articles 1 - 18 of 18

Full-Text Articles in Polymer and Organic Materials

Electrospinning Of Covalent Organic Frameworks (Cofs) For Adsorption Of Heavy Metal Ions, Samar A. Salim Jul 2026

Electrospinning Of Covalent Organic Frameworks (Cofs) For Adsorption Of Heavy Metal Ions, Samar A. Salim

Nanotechnology Research Centre

This study reported the synthesis, electrospinning, and heavy metal adsorption of covalent organic frameworks (COFs) integrated into poly(methyl methacrylate) (PMMA) nanofibers. COF-1 and COF-2 were synthesized by solvothermal and reflux techniques, respectively, and subsequently incorporated into PMMA via electrospinning with different loadings (0.1%, 0.5%, and 1.0%). The synthesized PMMA_COF nanofibers were analyzed utilizing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS). PMMA_COF nanofibers with fiber diameters of 350-450 nm were obtained. The structural and morphological investigations validated the effective integration of COFs into the PMMA matrix, with COF-1 demonstrating superior dispersion …

Go to article

Ferric Metal-Organic Frameworks (Mofs)-Based Electrospinning Fibers For Supercapacitors, Samar A. Salim, Hani Nasser Abdelhamid Sep 2025

Ferric Metal-Organic Frameworks (Mofs)-Based Electrospinning Fibers For Supercapacitors, Samar A. Salim, Hani Nasser Abdelhamid

Nanotechnology Research Centre

Ferric-based metal-organic frameworks (Fe-MOFs) were synthesized and incorporated into poly(methyl methacrylate) (PMMA) using electrospinning to produce PMMA_Fe-MOF nanofibers. The materials were analyzed using X-ray diffraction (XRD), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), and scanning electron microscopy (SEM). The electrospun materials were directly integrated into nickel foam (NF) electrodes for energy storage applications, e.g., supercapacitors. The electrochemical performance was assessed using cyclic voltammetry (CV), galvanostatic charge-discharge curves (GCDC), linear sweep voltammetry (LSV), and electrochemical potentiokinetic reactivation (EPR). The PMMA_Fe-MOF electrodes exhibited outstanding capacitive performance, achieving specific capacitances of up to 1017.5 F/g at 1 A/g for the 2.5 % Fe-MOF …

Go to article

Synthesis Of Activated Carbon From Coconut Shell And Recycled Styrofoam Nanofiber For Water Filtration, Rahma Dani, Ismet Ismet, Leni Marlina, Rona Alisya, Muhamad Abel Kirana Aldi, Anggi Ludiansyah, Lintang Auliya Kurdiati, Meutia Kamilatun Nuha Ap Idjan, Agung Mataram, Muhammad Rama Almafie, Ida Sriyanti Dec 2024

Synthesis Of Activated Carbon From Coconut Shell And Recycled Styrofoam Nanofiber For Water Filtration, Rahma Dani, Ismet Ismet, Leni Marlina, Rona Alisya, Muhamad Abel Kirana Aldi, Anggi Ludiansyah, Lintang Auliya Kurdiati, Meutia Kamilatun Nuha Ap Idjan, Agung Mataram, Muhammad Rama Almafie, Ida Sriyanti

Makara Journal of Science

Water pollution affects life sustainability; hence, several efforts have been exerted to overcome this problem. For ex-ample, nanofiber membrane technology is introduced to retain solutes while allowing only water molecules to pass through the system. Therefore, this study aimed to maximize the technology for water filtration using the electrospin-ning method by combining Styrofoam waste-based polymer with activated carbon from coconut shell waste (ACCS). The nanofiber diameter produced ranged from 590 nm to 610 nm with porous characteristics and without beads. The carbon content varied from 68.04% to 69.84%, according to the energy dispersive X-ray measurement, demonstrating the composite’s effectiveness. The …

Go to article

Additive Manufacturing With Bioresorbable Polymers: Process-Structure-Property Relationships For Biomimetic Tissue Scaffolds, Clayton Joseph Culbreath May 2024

Additive Manufacturing With Bioresorbable Polymers: Process-Structure-Property Relationships For Biomimetic Tissue Scaffolds, Clayton Joseph Culbreath

All Dissertations

Tissue engineering has a base requirement of scaffold structures to support cell growth, proliferation, and regeneration. However, attempts to use artificial scaffold structures have often fallen short of clinical needs to justify the change away from the established, biologic-based current standard of care. Based on the limited number of successful tissue scaffolds produced by material extrusion modes of additive manufacturing, fused filament 3d printing and electrospinning, critical design specifications for a tissue scaffold are six minimum requirements: 1) biocompatibility, 2) porosity, 3) mechanical properties, 4) bioresorbable medical grade materials, 5) bioactivity, and 6) appropriately scaled production methods compliant with medical …

Go to article

Cellulose Materials For Drug Delivery Applications, Reham Mohamed Oct 2023

Cellulose Materials For Drug Delivery Applications, Reham Mohamed

Mechanical Engineering Theses

Non-healing wounds are a growing global public health concern due to inadequate or ineffective therapeutic products available. Cellulose-based biopolymers are attractive wound dressing materials due to their biocompatibility, biodegradability, non-toxicity, and cost-effectiveness. This study aims to design and fabricate solid dosage formulations using carboxymethyl cellulose (CMC) and ethyl cellulose (EC) to facilitate multi-stage releases of phenytoin (PHT) and tetracycline hydrochloride (TCH) from plain carriers, fibers/films composites, and layer-by-layer fiber composites. Results from in vitro drug release assays demonstrated a time-dependent release up to 8 hours from PHT-loaded EC fibers, while TCH-loaded CMC films exhibited a rapid release within 5 minutes. …

Go to article

A Flexible Dual-Mode Pressure Sensor With Ultra-High Sensitivity Based On Bto@Mwcnts Core-Shell Nanofibers, Bangze Zhou, Chenchen Li, Yanfen Zhou, Zhanxu Liu, Xue Gao, Xueqin Wang, Liang Jiang, Mingwei Tian, Feng-Lei Zhou, Stephen Jerrams, Jianyong Yu Jan 2022

A Flexible Dual-Mode Pressure Sensor With Ultra-High Sensitivity Based On Bto@Mwcnts Core-Shell Nanofibers, Bangze Zhou, Chenchen Li, Yanfen Zhou, Zhanxu Liu, Xue Gao, Xueqin Wang, Liang Jiang, Mingwei Tian, Feng-Lei Zhou, Stephen Jerrams, Jianyong Yu

Articles

Wearable flexible sensors have developed rapidly in recent years because of their improved capacity to detect human motion in wide-ranging situations. In order to meet the requirements of flexibility and low detection limits, a new pressure sensor was fabricated based on electrospun barium titanate/multi-wall carbon nanotubes (BTO@MWCNTs) core-shell nanofibers coated with styrene-ethylene-butene-styrene block copolymer (SEBS). The sensor material (BTO@MWCNTs/SEBS) had a SEBS to BTO/MWCNTs mass ratio of 20:1 and exhibited an excellent piezoelectricity over a wide range of workable pressures from 1 to 50 kPa, higher output current of 56.37 nA and a superior piezoresistivity over a broad working range …

Go to article

Artificial Synthetic Scaffolds For Tissue Engineering Application Emphasizing The Role Of Biophysical Cues, Samerender Nagam Hanumantharao Jan 2020

Artificial Synthetic Scaffolds For Tissue Engineering Application Emphasizing The Role Of Biophysical Cues, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

The mechanotransduction of cells is the intrinsic ability of cells to convert the mechanical signals provided by the surrounding matrix and other cells into biochemical signals that affect several distinct processes such as tumorigenesis, wound healing, and organ formation. The use of biomaterials as an artificial scaffold for cell attachment, differentiation and proliferation provides a tool to modulate and understand the mechanotransduction pathways, develop better in vitro models and clinical remedies. The effect of topographical cues and stiffness was investigated in fibroblasts using polycaprolactone (PCL)- Polyaniline (PANI) based scaffolds that were fabricated using a self-assembly method and electrospinning. Through this …

Go to article

Nano Fab Lab 63, Brian K. Deemer, Josh Clemons, Nick Brodine, Delaney Fitzsimmons Jun 2019

Nano Fab Lab 63, Brian K. Deemer, Josh Clemons, Nick Brodine, Delaney Fitzsimmons

Mechanical Engineering

Lawrence Livermore National Laboratories (LLNL) has several steps in the production process for ceramic nanofiber tubes that they would like to improve - electrospinning, cutting, rolling, sealing and heat treating. We undertook the challenge to deliver LLNL with a semi-automated process that efficiently integrates the steps of cutting, rolling, and sealing to save time and improve control over end dimensions. In this document, we discuss the technical background of the manufacturing steps currently followed to create nanofiber tubes, identify which steps are incorporated in our prototype and explain how they will interface with one another, define the design requirements, present …

Go to article

A 3d Biomimetic Scaffold Using Electrospinning For Tissue Engineering Applications, Samerender Nagam Hanumantharao Jan 2017

A 3d Biomimetic Scaffold Using Electrospinning For Tissue Engineering Applications, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

Electrospinning holds great promise for designing functional 3D biomimetic scaffolds for tissue engineering applications. The technique allows for the reproducible fabrication of 3D scaffolds with control over the porosity and thickness. In this work, a novel method for the synthesis of a 3D electroactive scaffold using electrospinning from polycaprolactone (PCL), Polyvinylidene Fluoride (PVDF) and Polyaniline (PANI) is reported. Additional scaffolds involving different morphologies of PCL, PCL-PVDF and PCL-PANI-PVDF were also fabricated and evaluated. The scaffolds were characterized using electron microscopy to visualize the morphologies. Infrared spectroscopy was used to confirm the presence of polymers and their respective phases in the …

Go to article

Electrospinning Of Polycaprolactone Core-Shell Nanofibers With Anti-Cancer Drug, Sakib Iqbal, Mujibur Khan, Saheem Absar, Andrew Diamanduros, Samuel Chambers Apr 2015

Electrospinning Of Polycaprolactone Core-Shell Nanofibers With Anti-Cancer Drug, Sakib Iqbal, Mujibur Khan, Saheem Absar, Andrew Diamanduros, Samuel Chambers

GS4 Student Scholars Symposium

Encapsulation of a model anti-cancer drug, 5-Fluorouracul (5-FU) into biocompatible core-shell nanofibers of polycaprolactone (PCL) nanofibers was fabricated using a coaxial electrospinning process. Our work aims to solve these issues using a novel method of fabrication of fibers featuring confinement of drugs within a biodegradable core-shell structure, thereby permitting sustained release of drugs to specific sites of treatment, such as tissues affected with tumor cells. The coaxial electrospinning was performed using a sheath polymer solution consisting of a 14 wt% PCL solution and a 5 wt% solution of 5-FU as the core solution. Dimethylformamide (DMF) was used as the solvent …

Go to article

Peracetic Acid Sterilization Of Electrospun Polycaprolactone Scaffolds, Suyog Yoganarasimha Jan 2015

Peracetic Acid Sterilization Of Electrospun Polycaprolactone Scaffolds, Suyog Yoganarasimha

Theses and Dissertations

Sterilization of tissue engineered scaffolds is an important regulatory issue and is at the heart of patient safety. With the introduction of new biomaterials and micro/nano structured scaffolds, it is critical that the mode of sterilization preserve these built-in features. Conventional sterilization methods are not optimal for engineered polymeric systems and hence alternate systems need to be identified and validated. PCL is polyester with a low melting point (heat labile), susceptible to hydrolysis and is popular in tissue engineering. Electrospinning generates some nanoscale features within the scaffold, the integrity of which can be affected by sterilization method. Chapter 1 explores …

Go to article

Effect Of Nanofiber Morphology On Pvdf Air Filter Performance, Andrew W. Marton Jan 2015

Effect Of Nanofiber Morphology On Pvdf Air Filter Performance, Andrew W. Marton

Williams Honors College, Honors Research Projects

Poly(vinylidene fluoride) (PVDF) can be formed into small nanofibers by electrospinning that are useful for a variety of applications. Air filters produced with PVDF are known to capture ionic particles with high efficiency. Existing studies have focused on the effects of electrospinning conditions on nanofiber morphology. In this study fibers were generated with varying morphologies. Air filters were then made from each sample and then characterized by TSI. Air filters were found to have increased resistances relative to their capture efficiencies according to particle diameter. Capture efficiencies did not correlate strongly with particle diameter, and the presence of beads in …

Go to article

Reusable Adhesive Tapes From Electrospun Polymer Fibers, Vishal K. Chaurasia Jan 2015

Reusable Adhesive Tapes From Electrospun Polymer Fibers, Vishal K. Chaurasia

Williams Honors College, Honors Research Projects

Many emerging applications demand an adhesive that has reusable properties. The adhesive must exhibit high adhesion strength to various surfaces and be able to be removed easily and then reapplied with minimal to no loss in adhesion strength. This work aims to tackle this problem by creating an adhesive tape fabricated by electrospinning polymer solutions onto a substrate. Electrospun adhesive nano/micro fibers have the ability to display the reusable characteristics desired. Several adhesive custom formulations were first developed and optimized for electrospinning. Then these formulations were successfully electrospun on to various substrates after much fine tuning of electrospinning parameters. The …

Go to article

Electrospinning Applications Air Filtration And Superhydrophobic Materials, Negar Ghochaghi, Adetoun Taiwo Jan 2014

Electrospinning Applications Air Filtration And Superhydrophobic Materials, Negar Ghochaghi, Adetoun Taiwo

Graduate Research Posters

Electrospinning is a widely applicable technique that generates non-woven fibers in the micro and nano range. In this project two of its applications are highlighted namely filtration media and enhancement of wettability. The first project demonstrates that electrospinning can be used to produce new fiber filtration media with controlled microstructure. The bimodal and unimodal orthogonal and random filters were made and characterized against their filtration efficiency and pressure drop. Figure of Merit (FOM) was also calculated and discussed. It is shown that the FOM increases when the electrospun fibers are arranged into alternating layers of aligned course and fine fibers. …

Go to article

Shelf Life Study Of Electrospun Plga Copolymers, Sean Youra, Nick Hudson Jun 2013

Shelf Life Study Of Electrospun Plga Copolymers, Sean Youra, Nick Hudson

Biomedical Engineering

Poly(lactic-co-glycolic acid) (PLGA) is one of the most commonly used copolymers for electrospinning in tissue engineering applications. However, most research has not focused on the copolymer itself in regards to how long it can be used effectively and if varying the concentrations of polylactic acid (PLA) and polyglycolic acid (PGA) affect the resulting properties. Electrospinning is the method we use to create the three-dimensional constructs, or “scaffolds”, for the blood vessel mimic (BVM) in the tissue engineering lab. The aim of our project was to investigate if the morphology and mechanical properties of the scaffolds changed over time when they …

Go to article

Experimental Study Of Nanofiber Production Through Forcespinning, Simon Padron, Arturo Fuentes, Dumitru Caruntu, Karen Lozano Jan 2013

Experimental Study Of Nanofiber Production Through Forcespinning, Simon Padron, Arturo Fuentes, Dumitru Caruntu, Karen Lozano

Mechanical Engineering Faculty Publications

A newly developed method of producing nanofibers, called forcespinning, has proven to be a viable alternative to mass produce nanofibers. Unlike electrospinning, the most common method currently being employed (which draws fibers through the use of electrostatic force), forcespinning utilizes centrifugal forces which allow for a host of new materials to be processed into nanofibers (given that electric fields are not required) while also providing a significant increase in yield and ease of production. This work presents a detailed explanation of the fiber formation process. The study is conducted using high speed photography to capture the jet initiation process at …

Go to article

Electrospun Polycaprolactone Nanofiber Scaffolds For Tissue Engineering, Andreas Haukas May 2012

Electrospun Polycaprolactone Nanofiber Scaffolds For Tissue Engineering, Andreas Haukas

Graduate Theses and Dissertations

Stem cell and tissue engineering offer us with a unique opportunity to research and develop new therapies for treating various diseases that are otherwise incurable using traditional medicines. However, development of these new therapies replies upon the establishment of in vitro cell culture and differentiation systems that mimic in vivo microenvironments required for cell-cell and cell-ECM interaction. The development of these cell culture systems depends upon the identification of appropriate biomaterials and cell sources. Biomaterials should be carefully selected and fabricated into scaffolds for supporting cell growth and differentiation. In this study, we explored the fabrication of 3D electrospun nanofiber …

Go to article

Assessment Of Electrospinning As An In-House Fabrication Technique For Blood Vessel Mimic Cellular Scaffolding, Colby M. James Sep 2009

Assessment Of Electrospinning As An In-House Fabrication Technique For Blood Vessel Mimic Cellular Scaffolding, Colby M. James

Master's Theses

Intravascular devices, such as stents, must be rigorously tested before they can be approved by the FDA. This includes bench top in vitro testing to determine biocompatibility, and animal model testing to ensure safety and efficacy. As an intermediate step, a blood vessel mimic (BVM) testing method has been developed that mimics the three dimensional structure of blood vessels using a perfusion bioreactor system, human derived endothelial cells, and a biocompatible polymer scaffold used to support growth of the blood vessel cells. The focus of this thesis was to find an in-house fabrication method capable of making cellular scaffolding for …

Go to article