Polymer and Organic Materials Commons^™

Tuning Ion Mobility And Molecular Confinement In High-Performance Polymer Electrolytes For Energy Storage, Ezzeldien Yousef Muhammed Yousef

Theses and Dissertations

This research addresses the critical energy density limitations of aqueous supercapacitors, which are traditionally constrained by the narrow electrochemical stability window (ESW) of water 1.23 V. By employing two distinct molecular engineering strategies, this study developed high-performance electrolyte systems that significantly extend voltage stability and thermal resilience.

The first system, CsBr@PAM/HA, utilizes a polyacrylamide and hyaluronic acid hydrogel matrix. This system exploits the chaotropic nature of Cs⁺ ions to disrupt the aqueous hydrogen-bonding network, enhancing ionic conductivity to 104 mS cm^-1. Through systematic salt screening, CsBr was identified as the optimal electrolyte, enabling a stable 2.0 V …

Thermally Induced Color Changes In Iron Oxide Pigments Used In Architectural Coatings, Han Diep

Master's Theses

The 2025 Palisades Fire was one of the most destructive wildfires in the history of Los Angeles, destroying thousands of structures and severely impacting the communities after. This widespread destruction demonstrated an urgent need for more effective wildfire prevention strategies. Architectural coatings do not only provide aesthetics and protection against environmental conditions but can also function as a thermal indicator when a fire breaks out. This study examines the thermally induced color transformation of iron oxide pigments, commonly used in earthtone paint, to provide information relevant to CAL FIRE for improved analysis of wildland-urban interface (WUI) fire behavior and mitigation …

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Engineering Silicone Magnetic Fluids For Localized Radiation Attenuation During Ocular Melanoma Brachytherapy, Zachary L. Caprow

All Dissertations

Ocular melanoma is commonly treated using plaque brachytherapy; however, radiation-induced damage to healthy ocular tissues frequently results in partial or complete vision loss. This work investigates the development of an injectable, magnetically responsive silicone magnetic fluid designed to localize adjacent to the tumor and attenuate low-energy gamma radiation during treatment.

The material system consists of iron oxide nanoparticles surface-functionalized with a siloxane polymer, in which the nanoparticles provide magnetic responsiveness and radiation attenuation, while the polymer coating ensures colloidal stability, injectability, and biocompatibility. A one-pot synthetic approach was developed wherein a functionalized siloxane polymer containing iron-affinitive groups was reacted with …

Co-Electrospinning Polyacrylonitrile (Pan) / Polymer Of Intrinsic Microporosity-1 (Pim-1) For Electrochemical-Based Sensor For Pyridine Detection And Absorption, Samar A. Salim

Nanotechnology Research Centre

The electrospinning of the polymer of intrinsic microporosity-1 (PIM-1) poses challenges due to its limited solubility and tendency to form bead-like structures at high concentrations. This work details the synthesis and analysis of electrospun composite fibers made from polyacrylonitrile (PAN) and PIM-1 for electrochemical applications. The data analysis confirmed the successful incorporation of PIM-1 into the PAN matrix. The fiber characteristics were significantly influenced by PIM-1 loading (1–10%), resulting in fiber diameters ranging from 0.8 to 1.7 μm. A 10% concentration of PIM-1 results in the formation of macropores with diameters ranging from 0.5 to 1.7 μm. Optical analysis using …

Revisiting The Life Cycle Of Margalefidinium Polykrikoides Group Iii, Eduardo Pérez-Vega, Kenneth N. Mertens, Pjotr Meyvisch, Margaret R. Mulholland

OES Faculty Publications

Dinoflagellates produce cysts as a strategy to withstand environmental stressors, with nutrient depletion generally considered a key trigger for cyst production. Resting cysts are thick-walled, typically composed of one to several layers, and characterized by a prolonged dormancy period. In contrast, pellicle cysts possess a thin, single wall and exhibit no dormancy or a markedly shorter dormancy than resting cysts of the same species. Margalefidinium polykrikoides produces pellicle and resting cysts, whereas its congener, M. fulvescens, has been shown to produce pumpkin-like structures. Using phase-contrast microscopy, time-lapse microscopy, FlowCam, and attenuated total reflection Fourier transform infrared microspectroscopy (ATR μ-FTIR), …

Sulfhydryl-Functionalized Diarylethenes: Synthesis, Photoswitching, And Fluorescent Properties, Pramod Aryal, Jonathan Bietsch, Gowri Sankar Grandhi, Josh Choi, Guijun Wang

Chemistry & Biochemistry Faculty Publications

Sulfhydryl group (SH) plays important roles in reactions with various functional groups, especially in biologically active systems. Photoswitchable diarylethene (DAE) derivatives have demonstrated applications in many research fields. Among the many classes of diarylethene derivatives, thiol derivatives have not been extensively explored. In this study, we systematically synthesized and characterized a series of bis-thiol functionalized dithienylethene derivatives. The thiol groups in this series are attached directly to the thiophene, or through a phenyl or methylene linker. Each series incorporated both dithienyl cyclopentene and hexafluorocyclopentene bridges and total six thiol substituted diarylethenes were synthesized. Among the six sulfhydryl DAE derivatives, four …

Computational Design Of Nanoporous Materials For The Adsorption Of Per- And Polyfluoroalkyl Substances, Daniel D. Mottern

Dissertations

Per- and polyfluoroalkyl substances (PFAS) are a large family of chemicals that have seen wide usage due to their fluorinated carbon backbone. The presence of strong C-F bonds in the backbone lends PFAS molecules high thermal and chemical stability, as well as strong hydrophobicity and lipophobicity. This combination of properties has led to heavy use of PFAS as surfactants, non-stick coatings, and aqueous foam forming films and flame retardants. However, these properties bring their own consequences. The high chemical and thermal stability of PFAS renders them persistent, with the C-F bonds resisting naturally occurring forms of degradation. Existing forms of …

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Marvin C. Caya, Shervin Austin C. Huang, Jovar Khalel J. Maghari, Ruel M. Levida

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Upcycling Commodity Polymers To Advanced Materials For Energy And Environmental Sustainability, Anthony Griffin-Espinoza

Dissertations

Synthetic polymers play an essential role in nearly every aspect of our lives. Extending beyond single-use packaging, polymeric material design has progressed to attain tailorable architectures granting exceptional performance across advanced applications, including carbon-fiber reinforced polymer composites for aerospace, conductive materials for soft electronics, and drug carriers for biomedicine. While highly promising, intricately designed polymers needed to achieve excellent performance often have limited processability, complex synthetic methods, and expensive precursors. Furthermore, due to a lack of recyclability, commodity polymer waste streams result in both environmental impacts and a substantial loss of economic value. This dissertation focuses on developing robust strategies …

The Science And Economics Of 3d-Printed Filament Recycling, Michael Domingo, Dane Freund, John Mcswiggin, Adam Meadows

Sustainability Conference

In recent years, 3D printing has grown rapidly, both in homes and commercially. This has led to increased demand for plastic filaments, many of which contribute to plastic waste. This project explores the potential of recycling household plastics into 3D printing filament, promoting sustainability and creating a circular economy. Materials like PLA, PETG, ABS, and polypropylene can be recycled or even composted. Existing research has shown that recycled filaments can maintain comparable tensile strength to their virgin counterparts, depending on the recycling process. Furthermore, implementing circular economy practices for plastics could save billions annually by mitigating pollution and reducing landfill …

Understanding Structure-Property Relationships Within Polyolefin-Derived Vitrimer Systems, Mikaela Sadri

Dissertations

Polyolefins are extremely ubiquitous materials due to their satisfactory material properties, ease of synthesis, and low cost. Unfortunately, their extensive use has led to a global plastic waste mismanagement problem. As such, notable efforts have recently focused on converting these commodity polymers into vitrimers, or dynamic networks, to extend their use-life and tailor their properties. However, the fundamental polymer physics of these emerging materials, remain largely underexplored, hindering their widespread implementation. To address this challenge and enable a more sustainable future, the overarching goal of my dissertation research is to understand the fundamental structure-property relationships within complex polyolefin-derived vitrimer systems. …

Poly(Pyridinium Salt)S Containing 9,9-Bis(4- Aminophenyl)Fluorene Moieties With Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline And Light-Emitting Properties, Pradip K. Bhowmik, David King, Haesook Han, Andras F. Wacha, Matti Knaapila

Chemistry and Biochemistry Faculty Research

Main-chain conjugated and non-conjugated polyelectrolytes are an important class of materials that have many technological applications ranging from fire-retardant materials to carbon-nanotube composites, nonlinear optical materials, electrochromic materials for smart windows, and optical sensors for biomolecules. Here, we describe a series of poly(pyridinium salt)s-fluorene containing 9,9-bis(4-aminophenyl)fluorene moieties with various organic counterions that were synthesized using ring-transmutation polymerization and metathesis reactions, which are non-conjugated polyelectrolytes. Their chemical structures were characterized by Fourier transform infrared (FTIR), proton (1H) and fluorine 19 (19F) nuclear magnetic resonance (NMR) spectrometers, and elemental analysis. They exhibited polyelectrolytic behavior in dimethyl sulfoxide. Their lyotropic liquid-crystalline phases were …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

Tailoring The Morphology Of Block Copolymers Via Solvent-Vapor Annealing, Bayleigh Madelin Loving

Honors Theses

Triblock polystyrene-polyisobutylene-polystyrene (PS-PIB-PS) copolymers have widespread applications from thermoplastic elastomers to protective coatings for ballistic applications. The incompatibility between the soft PIB and hard PS phases leads to phase separation and subsequent formation of morphological domains like lamellae and cylinders. The structures are stabilized by physical crosslinks, which can greatly improve the toughness of the triblock systems by preventing chain pullout during tensile deformation. We tailored the morphologies (achieving different morphologies with the same block copolymer) by changing the annealing conditions of the block copolymers. Solvent vapor annealing was used to selectively activate the mobility of a particular block, causing …

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …

Effects Of High Temperature Compaction On 3d Printed Carbon Fiber Reinforced Polymer Composites, John D. Barber

Mechanical & Aerospace Engineering Theses & Dissertations

The aim of this dissertation was to study the effects of hot temperature compaction (HTC) upon the polymorphism and the mechanical behavior of an additively manufactured (AM), carbon fiber reinforced polyamide (PA6). Different pressure and temperature levels during HTC were tested to determine the overall effect upon the mechanical behavior and the material crystalline composition. Treated, carbon fiber reinforced PA6 samples were analyzed using differential scanning calorimetry, x-ray diffraction, thermogravimetric analysis, scanning electron microscopy, double cantilever beam testing and three-point bending testing. When considered with respect to as-printed samples, an HTC temperature of 190°C combined with 80 psi pressure resulted …

Solid-State Crystallization Of Zeolites And Their Use In Plastic Upcycling Applications, Yixin Liao

Doctoral Dissertations

Plastics have been an irreplaceable component of modern technology as well as everyday life. They have brought much convenience to us with their characteristics of great malleability, durability, and stability. The versatile and low-cost nature of plastics also enables their wide engagement in many modern industries including automobile, medical, communication as well as aerospace. Polyethylene (“PE”), made from polymerization of ethylene, is one of the most widely used plastics in the world. Being cheap, flexible, and long-lasting, they are extensively used in the packaging industry, especially for plastic bags and other sorts of containers. However, the durability of plastics, on …

Refining Chlorosulfonation Methods For The Synthesis Of A Perfluoroalkyl Arylsulfonimide (Pfsi) Monomer, Ainsley P. Foster, Ben Varney, Hua Mei

SPARK Symposium Presentations

Proton-exchange membrane (PEM) fuel cells are sources of energy that are clean, quiet, and highly responsive to changes in power needs, making them promising for use in automobiles and other portable power devices. The electrolyte of a PEM cell–the layer responsible for conductivity–is a polymer membrane, commonly consisting of perfluoroalkyl sulfonic acid (PFSA) polymers. In place of the PFSA polymers, perfluoroalkyl arylsulfonimide (PFSI) polymers are expected to improve the efficiency of PEM fuel cells with better stability and proton conductivity. The trifluovinylether (TFVE) aryl perfluorosulfonamide monomer is a new PFSI monomer proposed to fulfill these benefits once polymerized. The previous …

Biobased Acrylate Composites With Enhanced Strength For Additive Manufacturing, Nicole Wagner, Joseph Mcwherter

Engineering Faculty Articles and Research

With the expanding use of polymers in additive manufacturing, sustainable resins for use in vat photopolymerization are required to reduce their environmental impact. One promising approach to achieve this is to incorporate biobased fillers that replace the acrylates in photopolymer resins as ‘green’ alternatives. In this study, photopolymer composites consisting of a methacrylate resin with varying calcium carbonate powder content between 0 and 50 wt.% were investigated. A digital light processing technique was used to fabricate tensile test specimens for mechanical testing. Good printability, dimensional accuracy, and good interlayer adhesion were observed for composite resin formulations that incorporated calcium carbonate …

Influence Of Glycopolymer Structure On Amphiphilic, Hybrid, Linear Branched Block Copolymer Properties For Use In Biomedical Applications, Kevin Green

Dissertations

The focus of this dissertation is evaluating and adding fundamental knowledge regarding the structure-property relations of glycopolymers used in the design of hybrid block copolymers (HBC) that are cable of self-assembling into delivery vehicles for biomedical applications. A shift to the utilization of natural materials in the design and fabrication of drug-delivery vehicles has garnered significant attention. Understanding the effects of linear glycopolymers content and composition on the resulting HBCs properties can provide valuable insight into how these materials may be tailored for use in targeted biological applications.

The first chapter introduces current literature on the need for improvement in …

Understanding The Plastic Issue (Poster Presentation), Regan Bossie, Peter Nguyen, John Mcswiggin, Adam Meadows

Sustainability Conference

The Plastic-Free Campus Initiative is an Embry-Riddle initiative advocating for the reduction and elimination of single-use plastics on the Daytona Beach campus.

Our poster presentation aims to highlight current issues and concerns by presenting plastic production trends, quantifying how plastic pollution has affected global ecosystems, and discussing the material characteristics of plastics and their consequences. The poster will provide an overview of the current state of global recycling and will outline key concerns that microplastics, and plastics in general, pose to public health. By presenting the current facts and concerns related to plastic and recycling, we hope to encourage individuals …

Refining Chlorosulfonation Methods For The Synthesis Of A Perfluoroalkyl Arylsulfonimide (Pfsi) Monomer, Ainsley P. Foster, Benjamin Varney, Hua Mei

Science University Research Symposium (SURS)

Proton-exchange membrane (PEM) fuel cells are sources of energy that are clean, quiet, and highly responsive to changes in power needs, making them promising for use in automobiles and other portable power devices. The electrolyte of a PEM cell–the layer responsible for conductivity–is a polymer membrane, commonly consisting of perfluoroalkyl sulfonic acid (PFSA) polymers. Perfluoroalkyl arylsulfonimide (PFSI) polymers are expected to improve the efficiency of PEM fuel cells through optimal stability and proton conductivity. The trifluovinylether (TFVE) aryl perfluorosulfonamide monomer is a new PFSI monomer proposed to fulfill these benefits once polymerized. A six-step synthesis route was initially designed to …

Solubility Characterization Of Organic Molecules For Aqueous Organic Redox Flow Batteries, Anthony W. Ferrell, Harkeerith K. Vij, Seamus D. Jones

College of Engineering Summer Undergraduate Research Program

The major obstacle to renewable energy sources is a lack of long-term energy storage capabilities. Energy produced during the day dissipates, leaving insufficient electricity for at night. The goal of the project is to design an Aqueous Organic Redox Flow Battery (AORFB) to act as long-term energy storage. Work has been done using machine learning to identify suitable compounds for the batteries. In this work there was no indication as to the aqueous solubility of the molecules; this controls the device’s energy storage capabilities. We used a machine learning model to determine the aqueous solubility of slightly more than 3000 …

Investigation Of Temperature, Solution Strength, And Applied Stress Effects On Cation Exchange Processes In Different Geosynthetic Clay Liner Products, Kendra Fuller

Master's Theses

An extensive laboratory test program was conducted to analyze and compare the cation exchange processes in three different varieties of sodium bentonite (Na-B) geosynthetic clay liners (GCLs) over increased conditioning durations up to 32 days and investigate the effects of temperature, solution strength, and applied stress. The goal of this test program was to establish whether the variables of temperature, solution strength, and applied stress improved or degraded the engineering properties of GCLs in laboratory testing and municipal solid waste (MSW) landfill applications. The GCLs were conditioned in liquids of increasing ionic strength, using deionized water and 2, 50, and …

Performance And Enhanced Efficiency Induced By Cold Plasma On Sapo-34 Membranes For Co2 And Ch4 Mixtures, Fnu Gorky, Vashanti Storr, Grace Jones, Apolo Nambo, Jacek B. Jasinski, Maria L. Carreon

Chemical Engineering Faculty Publications and Presentations

In this study, we investigate the influence of cold-plasma-induced enhanced performance and efficiency of SAPO-34 membranes in the separation of CO₂ and CH₄ mixtures. Placing the herein presented research in a broader context, we aim to address the question of whether cold plasma can significantly impact the membrane performance. We subjected SAPO-34 membranes to plasma mild disturbances and analyzed their performance in separating CO₂ and CH₄. Our findings reveal a notable enhancement in membrane efficiency and sustained performance when exposed to cold plasma. The pulsed plasma separation displayed improved structural integrity, and the experimental results …

Physics-Informed Machine Learning Methods For Inverse Design Of Multi-Phase Materials With Targeted Mechanical Properties, Yunpeng Wu

All Dissertations

Advances in machine learning algorithms and applications have significantly enhanced engineering inverse design capabilities. This work focuses on the machine learning-based inverse design of material microstructures with targeted linear and nonlinear mechanical properties. It involves developing and applying predictive and generative physics-informed neural networks for both 2D and 3D multiphase materials.

The first investigation aims to develop a machine learning method for the inverse design of 2D multiphase materials, particularly porous materials. We first develop machine learning methods to understand the implicit relationship between a material's microstructure and its mechanical behavior. Specifically, we use ResNet-based models to predict the elastic …

Chemical Recycling Of Bio-Based Polyurethane Foams: Evaluating Bio-Based Glycols In Comparison To Petroleum-Based Glycols, Anirudh Thorbole Mr.

Electronic Theses & Dissertations

The paradigm shift towards bio-based polyurethane foams (bio-PUF) has significantly increased post-consumer waste. To address this issue, this research represents a novel approach to enhance sustainable development in the recycling industry by replacing traditional petroleum-based glycols with sustainable bio-based alternatives. This study explores the glycolysis of bio-PUF using bio-based SG-522 glycol and polyethylene glycol (PEG) for comparison. The findings from this research as outlined, reveal no significant differences in depolymerization time between the two glycols, achieving proper depolymerization and high recovery yields of over 95% after solvent purification. Comprehensive FT-IR and NMR analyses confirmed the successful degradation of bio-PUF and …

Poly(Thioether) Thermosets With Gated Photodegradation, Surabhi Jha

Dissertations

Photodegradable polymer networks are attractive due to the precise spatiotemporal control and large-area applicability of light. Chemical linkages that enable these polymer networks to be photo-responsive, also hinder their applicability in ambient light. Photostable and photodegradable networks have recently been reported to overcome this challenge by combining other stimuli with light for degradation. We report the design of a network that responds to a simultaneous, dual stimulus for photodegradation. We design poly(thioether acetal) networks with benzylidene acetal moieties that are known to undergo β-scission in the presence of free thiols. By blocking these free thiols with a thermally labile protecting …