Biomechanical Engineering Commons^™

The Effect Of Football Facemask Design Variability On Dynamic Impact Performance And Quasi-Static Stiffness, Adam W. Smith

All Theses

This research addresses the role of facemasks in helmet systems, focusing on their dynamic impact performance and material properties. A total of 150 facemasks from 30 types and five helmets were tested both quasi-statically and dynamically. The facemasks were grouped by style and helmet type for comparison. Dynamic testing involved three different locations and two speeds, with data collected for maximum angular velocity and linear acceleration. Quasi-static stiffness, performed at two locations, was compared with collected dynamic results to determine the strength of relationship. A concussion metric, HARM, was calculated from collected data and compared across style groups.

Significant differences …

Characterizing The Molecular And Cellular Changes Of Senescent Cells Induced By Diverse Stressors In 2d And 3d Microenvironments, Apoorva Chauhan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Aging is a risk factor for myriad diseases and is often associated with the accumulation of senescent cells. Cellular senescence, a process of irreversible cell cycle arrest, is associated with various changes in cellular morphology and function. While senescence will occur naturally in a time-dependent manner, it can be prematurely induced by various extrinsic and intrinsic factors. Most senescence studies model cell behavior in two-dimensional (2D) microenvironments; however, these models are not physiologically relevant. In this study, the effects of naturally occurring reactive oxygen species (ROS) hydrogen peroxide (H2O2) and commonly used chemotherapy drugs, doxorubicin and palbociclib, on cellular senescence …

Development Of A Discrete Element Model For Artificial Turf, Justin Rittenhouse

Dissertations

NFL data exhibits a distinct correlation between an elevated lower extremity injury rate and synthetic surfaces. These ubiquitous injuries frequently relate to excessive foot traction (i.e., failure to release causing fracture or soft tissue damage). Consequently, a discrete element model was developed using open-source software to analyze stud traction. First, laboratory data was collected via bench level experiments covering seventeen different testing scenarios. A minimum of twenty-five samples were collected per scenario. Total work, average torque, and maximum torque were used as indicators of stud grip. And the latter two were statistically analyzed for outliers and significant differences. Next, an …

Removable Equipment Climate Canopy, Jessica Perez, Sabine Heid, Zil Panchal, Anali Salazar

Mechanical Engineering

The Climate Canopy Project has developed an improved solution for creating an adjustable shade mechanism tailored specifically for users of pull walkers. Through extensive research, goal setting, and a comprehensive framework our project has examined the challenges faced by individuals who rely on walkers for mobility. Our stakeholder requires a product that is lightweight, removable, and compact. This study dissected the designs of previous products on the market and aimed to build a product that aligns with our sponsor’s desires.

This report presents the main goals for the design and manufacturing process, along with key design features utilized to produce …

Effects Of The Loading Rate On Mechanical Properties Of The Human Superficial Femoral Artery, Ali Zolfaghari Sichani, Majid Jadidi

UNO Student Research and Creative Activity Fair

INTRODUCTION: Blood vessels are known for their viscoelastic mechanical behavior, including a dependency on the loading rate. Previous studies have shown mixed results regarding the effects of the loading rate on the mechanical properties of the arterial wall. In this study, our aim was to evaluate the loading rate dependency in the human Superficial Femoral Artery (SFA), the main artery of the leg....

Finite Element Analysis Of The Bearing Component Of Total Ankle Replacement Implants During The Stance Phase Of Gait, Timothy S. Jain

Master's Theses

Total ankle replacement (TAR) implants are an effective option to restore the range of motion of the ankle joint for arthritic patients. An effective tool for analyzing these implants’ mechanical performance and longevity in-silico is finite element analysis (FEA). ABAQUS FEA was used to statically analyze the von Mises stress and contact pressure on the articulating surface of the bearing component in two newly installed fixed-bearing total ankle replacement implants (the Wright Medical INBONE II and the Exactech Vantage). This bearing component rotates on the talar component to induce primary ankle joint motion of plantarflexion and dorsiflexion. The stress response …

Cardiac Active Tension Modeling Via Genetic Algorithm-Optimized Fractional Order Systems, Afnan Khaled Elhamshari

Theses and Dissertations

Developing a computational model to model cardiac activity has been increasingly important in recent decades. Accurate cell-level active tension modeling for cardiomyocytes is critical to understanding cardiac functionality on a patient-specific basis and developing an effective in-silico cardiac model. However, cell-level models in the literature fail to account for viscoelasticity and inter-patient variations in active tension. This research proposes a genetic algorithm-optimized, fractional order system to model cell-level active tension by extending Land’s state-of-the-art model of cardiac contraction. The model features the (left) Caputo derivative of six state variables that identify the mechanistic origins of viscoelasticity in a myocardial cell …

Commentary: A Patient-Specific Lower Extremity Biomechanical Analysis Of A Knee Orthotic During A Deep Squat Movement, Christine Dailey Walck

Publications

The recent study by Walck et al., titled “A Patient-Specific Lower Extremity Biomechanical Analysis of a Knee Orthotic during a Deep Squat Movement,” provides a novel insight into the biomechanical impacts of knee orthotics, particularly the non-linear spring-loaded (NLSL) knee joint orthosis (KJO)1 . This commentary aims to delve into the implications, interpretations, and evaluations of the findings, contextualizing them within the broader discourse on knee orthotics.

Optimal Additive Fabrication Of Patient-Specific Bone Tissue Scaffolds Through Material Formulation, Computational Flow Simulation, And Material Deposition Monitoring, Ethan O’Malley

Theses, Dissertations and Capstones

The advancement of additive manufacturing technologies has opened new avenues for fabricating biocompatible and structurally functional bone tissue scaffolds, essential in treating osseous fractures, defects, and diseases. This research aims to develop mechanically strong, dimensionally precise, and patient-specific porous bone tissue scaffolds that provide both structural integrity and biological functionality. Through three interconnected studies, several key challenges in the fabrication of these structures using the PME additive manufacturing process are addressed. First, the influence of polysaccharide and hydroxyapatite concentrations on the compressive modulus of PME-printed porous scaffolds is investigated. By creating structures with varying hydroxyapatite and polysaccharide compositions, the study …

Design Of Multi-Objective And Optimal Sliding Mode Controller For Tracking Knee Joint Angle During Squatting And Normal Gait Motion, Gabriel Sitler

Theses, Dissertations and Capstones

This work presents two objectives for the use of robust sliding mode controller (SMC) in optimal and multi-objective settings to regulate the position of the knee joint angle for patients suffering from knee injuries. The controller imitates the role of active orthoses that produce the joint torques required to overcome gravity and loading forces and regain natural human movements. The first objective is to focus only on the knee, for which a mathematical model of the shank, the lower part of the leg, is derived first and then used for the control system design and computer simulations. Four objectives are …

Numerical Design, Fabrication, And Characterization Of Porous Tissue Scaffolds For Bone Regeneration, Brandon Coburn

Theses, Dissertations and Capstones

With the recent advancements within biomedical engineering of bone tissue scaffolds, there is still a need to develop mechanically robust and biocompatible with low immunogenicity for bone regeneration. Additionally, the evaluation of the fluid dynamics of the porous Triply Periodic Minimal Surfaces (TPMS) bone scaffold also shows the need for investigation due to the complex fluid interaction of hemodynamics that occurs with the scaffold internal and external domains. To aid in the development of treating bone fractures, defects, and diseases. Furthermore, with the induction of a wide variety of TPMS architecture that yields different topologies, the Convolutional Neural Network (CNN) …

Long-Term Simulation Of Stem Cell Mechanobiology, Manoochehr Rabiei

Mechanical and Aerospace Engineering Dissertations - Archive

An accurate representation of cellular mechanobiology necessitates the inclusion of subcellular elements characterized by minute masses and dimensions. These minute objects yield multiscale dynamic models with disproportionate terms, which require inordinate amounts of computational time to simulate. The computational requirements limit the time span of the simulation to time histories shorter than one second, even when employing supercomputers. This work presents a high-speed approach to simulating the mechanobiology of stem cells. The proposed approach separates the computational time from the size, and distribution, of masses of the subcellular elements, enabling the simulation of weeks-long cellular processes within hours on a …

Generalizable Fugitive Carrier Method For 3d Printing Of Hydrogels, Hakan Arslan

Mechanical and Aerospace Engineering Dissertations - Archive

Hydrogels, with physical characteristics resembling biological soft tissues, hold great potential for bioinspired and biomedical applications. However, using them in additive manufacturing systems has challenges because of their poor mechanical and rheological properties. In response to these challenges, we introduce a fugitive carrier method, a novel and generalizable approach for materials incompatible with pneumatic-based extrusion three-dimensional (3D) printers. Our developed fugitive carrier method allows the 3D printing of a broad spectrum of hydrogel precursors with low viscosity while retaining their inherent properties. This technique has been successfully demonstrated by creating biomimetic structures with anisotropic and programmable systems utilizing temperature-sensitive hydrogel …

Insights Into The Characterization And Degradation Of Electrospun Polycaprolactone Scaffolds For Tissue Engineering Applications, Caleb B. Wells

Theses and Dissertations

Electrospun polymeric biodegradable scaffolds are essential in tissue engineering, particularly for Engineered Tissue Vascular Grafts (ETVGs), which promise advancements in treating coronary artery disease, peripheral arterial disease, congenital cardiovascular defects, and renal disease. These scaffolds present a solution to issues with autologous graft availability and durability. While large-diameter grafts in low-pressure environments have seen success, small-diameter grafts in high-flow scenarios remain challenging. Understanding polymeric scaffold degradation and behavior during incubation, especially under dynamic mechanical loading, is vital for clinical translation of small-caliber ETVGs.

This research focuses on characterizing the mechanical and microstructural properties of electrospun polycaprolactone (PCL) scaffolds and their …

Multiscale Fiber Remodeling In The Heart Using A Finite Element Framework, Mohammad Mehri

Theses and Dissertations--Mechanical and Aerospace Engineering

The organization of myofibers and extra cellular matrix within the myocardium plays a significant role in defining cardiac function. When pathological events occur, such as myocardial infarction (MI) or hypertrophic cardiomyopathy (HCM), this organization can become disrupted, leading to alteration in pumping performance. The current study proposes a multiscale finite element (FE) framework to determine realistic fiber distributions in the left ventricle (LV). This is achieved by implementing a stress-based fiber reorientation law, which seeks to align the fibers with local traction vectors, such that contractile force and load bearing capabilities are maximized. By utilizing the total stress (passive and …

Development Of A 2-Dof Robotic Uterus Manipulator, Jeremiah Eggleston, Nicole Pishnery, Siddharth Navaneetha Raj

Williams Honors College, Honors Research Projects

The objective for our senior design project was to design a better uterus manipulator to assist with hysterectomies. We worked with our advisor Dr. Sam Song from the university’s Mechanical Engineering department. There are a variety of uterus manipulators on the market currently, each with unique design features to make the manipulator safer and more effective (van den Haak et al, 2015). Our group’s design modifies and sets itself apart from manipulators currently on the market. Going off others’ attempts to make a better manipulator (Fournelis, 2022), the key modifications our design incorporates are an additional degree of freedom (for …

Shape Inverse Prediction Of Magnetic Field-Actuated Soft Robots By Neural Network Machine Learning, Lineth J. Perez Monsalve

Theses and Dissertations

Soft robotics has drawn tremendous interest in recent years because the compliance and motion of soft robotics enable biocompatibility and versatility for many applications, such as human-machine interaction, wearable and assistive devices, and health monitoring. This study introduces a novel predictive modeling approach using neural networks for shape control of magnetic soft robots. The robots are made of silicone materials embedded with hard magnetic particles, which respond to the external magnetic field provided by a ring-type of permanent magnet. These robots, free from physical connections to external devices, i.e., non-tethered actuation, hold significant potential for applications in healthcare, such as …

Machine Learning Applications In Spine Biomechanics, Farshid Ghezelbash, Amir Hossein Eskandari, Xavier Robert-Lachaine, Shufan Cao, Mehran Pesteie, Zhuohua Qiao, Aboulfazl Shirazi-Adl, Christian Larivière

Études primaires

Spine biomechanics is at a transformation with the advent and integration of machine learning and computer vision technologies. These novel techniques facilitate the estimation of 3D body shapes, anthropometrics, and kinematics from as simple as a single-camera image, making them more accessible and practical for a diverse range of applications. This study introduces a framework that merges these methodologies with traditional musculoskeletal modeling, enabling comprehensive analysis of spinal biomechanics during complex activities from a single camera. The real-world applications explored in this study include assessment in workplace lifting, evaluation of whiplash injuries in car accidents, and biomechanical analysis in professional …

Simultaneous Evaluation Of Tibiofemoral And Patellofemoral Mechanics In Total Knee Arthroplasty: A Combined Experimental And Computational Approach, Yashar A. Behnam, Ahilan Anantha Krishnan, Hayden Wilson, Chadd W. Clary

Center for Orthopaedic Biomechanics: Faculty Scholarship

Contemporary total knee arthroplasty (TKA) has not fully restored natural patellofemoral (P-F) mechanics across the patient population. Previous experimental simulations have been limited in their ability to create dynamic, unconstrained, muscle-driven P-F articulation while simultaneously controlling tibiofemoral (T-F) contact mechanics. The purpose of this study was to develop a novel experimental simulation and validate a corresponding finite element model to evaluate T-F and P-F mechanics. A commercially available wear simulator was retrofitted with custom fixturing to evaluate whole-knee TKA mechanics with varying patella heights during a simulated deep knee bend. A corresponding dynamic finite element model was developed to validate …

A Novel Magnetorheological Pump Concept For Insulin Delivery, Mohammad Towhidul Islam Rimon

College of Graduate Studies: Theses & Dissertations

Over the past 25 years, awareness of type 1 diabetes has significantly increased, leading to a comprehensive understanding of various aspects, including its genetics, epidemiology, and disease burden. According to the Type 1 Diabetic Index, about 8.7 million people around the world live with this long-term autoimmune disease characterized by insulin deficiency and resultant hyperglycemia. However, the increased availability and utilization of artificial pancreas systems could potentially save 673,000 lives by 2040. Although, the advancement of diabetes technology offers Type 1 diabetic patients more tools to enhance glycemic management and achieve effective outcomes, many patients are still hesitant to adopt …

Borophene And Graphene For Non-Enzymatic Biosensor- Ab-Initio Study, Omar A. Ismail

Theses and Dissertations

Non-enzymatic glucose sensing holds promise to overcome limitations associated with glucose oxidase, such as oxygen dependence and short shelf life. This study explores the potential sensing capabilities of borophene and graphene through direct interaction with various compounds, including β-glucose, uric acid, ascorbic acid, fructose, and acetaminophen. Using Density Functional Theory (DFT), we calculated binding energies and the respective Density of States (DOS) for these adsorbates on both graphene and borophene surfaces. Preliminary results suggest that borophene might exhibit nearly twice the affinity for β-glucose compared to graphene. Moreover, the calculated Density of States reveals distinct distortions in the electronic states …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Computational Modeling Using A Novel Continuum Approach Coupled With Pathway-Informed Neural Networks To Optimize Dynein-Mediated Centrosome Positioning In Polarized Cells, Arkaprovo Ghosal, Padmanabhan Seshaiyar Dr., Adriana Dawes Dr., General Genomics Inc.

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Changes In Balance With Brain Inflammation: Sensitivity In Dual Motor Mechanisms, Hannah Mcdade

Electronic Theses and Dissertations

Concussion assessment in athletes has gained prominence due to potential long-term consequences of traumatic brain injuries. Evaluating balance alterations is crucial for understanding post-injury motor control strategies. This study introduces a novel approach to understanding center of pressure (COP) dynamics during quiet stance tasks for assessing balance impairments in athletes recovering from concussion. Concussed athletes often experience impaired motor function and cognitive deficits, increasing the risk of orthopedic injury. Traditional balance assessments focus on total COP (COPt), overlooking nuanced hip and ankle mechanisms. This research investigates COP variations between constant loading (COPc) and variable loading (COPv) signals in concussed athletes …

Kinematic Analysis Of Gait And Deep Knee Flexion For Pre- And Post-Operative Total Knee Arthroplasty, Samantha Collins

Electronic Theses and Dissertations

Osteoarthritis (OA) is a form of arthritis that develops in the joint due to overuse and aging causing pain, discomfort, and disability. Total Knee Arthroplasty (TKA) is a surgical procedure performed when OA symptoms are severe with an estimated 600,000 patients in the United States currently receiving TKA. Studies have reported dissatisfaction of the knee for 14-39% of patients. This study collected knee kinematics before and after surgery using stereo radiography for precise measurement of gait and deep knee flexion activities. Results showed healthy knee kinematics were not restored and no significant changes could be seen from OA kinematics in …

Exploration Of Motion Capture System To Investigate Human Shoulder Kinematics, Ola Alsaadi

Electronic Theses and Dissertations

The glenohumeral joint (GH) is commonly conceptualized as a ball-and-socket joint [1], and its center of rotation (COR) is presumed to coincide with the geometric center of the medial-superior region of the humeral head [2]. Recent research has endorsed improvements in COR estimation through invasive and noninvasive techniques, including cadaver studies, stereophotogrammetry, and motion capture (MOCAP) systems. Despite increased interest in wearable technology within human movement analysis, the problem of COR estimation employing MOCAP systems and its validation against bi-planar fluoroscopy remains relatively unexplored.

This study employed a marker-based MOCAP system to compare the accuracy, error, and precision of three …

Computational Methodology For Generating Patient-Specific Soft Tissue Representations, Ahilan Anantha Krishnan

Electronic Theses and Dissertations

This dissertation focused on modeling specimen-specific soft tissue structures in the context of joint replacement surgery. The research addressed four key aspects. The first study involved developing a workflow for creating finite element models of the hip capsule to replicate its torque-rotational response. Experimental data from ten cadaveric hips were used to calibrate the models, resulting in improved accuracy and relevance for surgical planning and implant design. The second study tackled the challenge of expediting the calibration of mechanical properties of the hip capsule to match patient-specific laxities. A statistical shape function model was proposed to generate patient-specific finite element …

Digital Twins Of The Living Knee: From Measurements To Model, Thor Erik Andreassen

Electronic Theses and Dissertations

Modern medicine has dramatically improved the lives of many. In orthopaedics, robotic surgery has given clinicians superior accuracy when performing interventions over conventional methods. Nevertheless, while these and many other methods are available to ensure treatments are performed successfully, far fewer methods exist to predict the proper treatment option for a given person. Clinicians are forced to categorize individuals, choosing the best treatment on “average.” However, many individuals differ significantly from the “average” person, for which many of these treatments are designed. Going forward, a method of testing, evaluating, and predicting different treatment options' short- and long-term effects on an …

Analysis Of Gait Parameters And Knee Angles In Ultimate Frisbee Players: Implications For Balance And Injury, Ethan Nikcevich

Master's Theses

Biomechanics research investigating gait and balance of ultimate frisbee players is an unexplored topic. Ultimate requires a wide range of motions that could improve balance and is also a sport prone to frequent injury. This study explores the impact of playing ultimate on gait parameters associated with balance and knee angles associated with joint injury. Gait trials were conducted on 8 ultimate players and 8 control participants between the ages of 18 and 23 to obtain total double support time, stance phase time, single support time, load response time, abduction-adduction (AA) angles, internal-external (IE) rotation angles, and flexion angles of …

Exoskeletons - Designing For Social Justice, Grace Cd Murphy

College of Engineering Summer Undergraduate Research Program

Many engineering professionals believe that discussions surrounding diversity, equity, and inclusion (DEI), and social justice do not belong in engineering because engineering is supposed to be a neutral or objective field. Through an extensive review of the literature and a survey sent out to potential users, the need for DEI in engineering was examined. Many current engineering projects do not take into consideration social justice principles which leaves certain groups further marginalized and disempowered while empowering a select few. Engineering has the opportunity to be a field of service, but first risks and benefits must be weighed and the outcome …