Biomechanical Engineering Commons^™

Cochlear Electrode Insertion Training Model, Sarah Powell, Kaelyn E. Kraley, Nathan J. Smith

Williams Honors College, Honors Research Projects

Cochlear implant surgery is a delicate procedure performed by Otolaryngologists (ENTs) to implant an electronic device into the inner ear to provide a sense of sound for people who are profoundly deaf or hard of hearing. The current practices of training involve cadavers and 3D-printed models. Cadavers are commonly used but are expensive, single-use, and do not provide visual and haptic feedback, which are essential for medical students. 3D printed models are less commonly used and are hard to fabricate and not as realistic. If medical students are not properly trained for this delicate procedure, then risks are significantly increased …

Effects Of Changes In Strouhal And Reynolds Numbers On Beetle Wing Aerodynamics, Keith L. Thiha

Honors Undergraduate Theses

Insect flight has long been a subject of interest across the scientific community, largely due to the exceptional aerodynamic performance insects demonstrate relative to their size. Insects tend to have very high aerodynamic performance characteristics like thrust and lift generation compared to their size. This has many potential applications in improving aircraft performance, however the flow phenomena concerning insect wing aerodynamics is still an area of ongoing research. This study aims to investigate how variations in key nondimensional flow parameters—specifically the Reynolds number and Strouhal number—affect the aerodynamic performance of beetle wings. Strouhal numbers ranging from 0.2 to 0.6 were …

Mechanically Cost-Effective Approach For Bipedal Walking In Robots Using Instantaneous Collision Angle, Smit R. Patel

UNLV Theses, Dissertations, Professional Papers, and Capstones

Humans, as bipedal locomotors, are effective at reducing the mechanical cost of transport (CoTmech) by adopting movement strategies and gaits that minimize energy expenditure for a given distance. By using different gaits at different speeds, leveraging their long spring-like tendons and muscle elasticity which store and release energy during movement, humans reduce the mechanical effort required for locomotion. Current locomotion solutions offered in bipedal robots, based on legacy walking and running gait models, are not great at energy efficiency unless walking at very low speeds. Additionally, the control system of robots, designed to ensure stability and adaptability, requires substantial resources, …

The Waterbug: Adaptive Paddle Board Frame, Remy James Elio Lacchia, Katie Kellum, Madeline Evenson, Shelbi Sullaway

Mechanical Engineering

People with disabilities, particularly wheelchair users, face limitations in participating in outdoor activities like paddleboarding. Central Cal Adaptive, a nonprofit organization, aims to bridge this gap by offering adapted paddleboarding experiences. However, their current paddleboard presents challenges such as portability, range of motion, stability, and safety. Our team, comprising Madeline Evenson, Remy Lacchia, Katie Kellum, and Shelbi Sullaway, has collaborated with Central Cal Adaptive to refine the existing paddleboard design. The team’s goal is to enhance the paddleboard's functionality to better cater to wheelchair users' needs, ensuring lightweight, portable, and safe features for an improved outdoor experience.

Our paddleboard concept …

Alteration Of Peripheral Cytokines In Alzheimer’S Disease, Zhengshi Yang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Alzheimer’s disease (AD) is a progressive neurodegenerative disease with the clinical symptoms of gradual cognitive decline and memory loss. Biologically, abnormal accumulation of Aβ (Aβ) plaque and tau tangles in the brain are the core pathological hallmarks in AD. Although inflammatory response is not specific to AD, emerging evidence suggests that the disrupted innate immune system within the central nervous system, particularly microglial activation, might act as the bridge linking Aβ aggregation to pathological phosphorylation and aggregation of tau. The inflammatory response was suggested to initially have a neuroprotective role of attempting to clear Aβ plaques, and then become neurotoxic …

Delineating Genetic Influences On Neurodegenerative Disorders And Infectious Diseases Through Advanced Computational Methods, Xiaowei Zhuang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Genetics plays a critical role in understanding the molecular mechanisms underlying neurodegenerative disorders and pathogen evolution in infectious diseases. For example, identifying genetic variants associated with a disease phenotype uncovers functional pathways that could lead to potential drug targets and therapeutic interventions. In addition, tracking the genetic evolution of pathogens enables early detection and warning of infectious disease outbreaks. In both applications, given the large amount of genetic data, advanced computational methods, including longitudinal and multivariate models, could significantly boost the statistical power and capture interrelationships among traits, environmental factors and genetic influences. This dissertation focuses on four applications of …

Magnetic Nano And Micro Rods As Tools For Characterizing Materials Mechanical Properties: Fundamentals And Applications, Artis Brasovs

All Dissertations

The focus of this dissertation is insect blood (Hemolymph). Hemolymph is analyzed by taking a materials science approach. Rheological characterization of hemolymph has been performed for the first time. Owing to a minute amount of available material, a new protocol was established where Magnetic Rotational Spectroscopy (MRS) with ferromagnetic nanorods was employed. The challenge was examining the microliter droplets' viscosity in less than a few minutes. This challenge was successfully resolved.

Blood is critical for the insect's survival: after wounding, the insect has to seal the wound quickly, in a few minutes. As the mechanism of fast clotting has never …

Applications Of Computer Vision In Biomechanics And Orthopaedics, William Stewart Burton Ii

Electronic Theses and Dissertations

Machine learning has emerged as a key technology for enabling advanced computer vision systems. These systems now permeate many industries, and have enhanced traditional processes through autonomous interpretation of visual data. In the field of orthopaedics, the increasing prevalence of imaging highlights a need for similar tools. In many cases, however, direct translation of available frameworks fails to resolve the complex problems currently facing this field. Stringent performance requirements, complex visual environments, data scarcity, and implications for patient safety represent domain-specific factors which pose unique challenges to proven techniques. Novel approaches are needed to realize the full benefits of visual …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Personalized Bioceramic Grafts For Craniomaxillofacial Bone Regeneration, Ana Beatriz G. De Carvalho, Maedeh Rahimnejad, Rodrigo L. M. S. Oliveira, Prabaha Sikder, Guilherme S. F. A. Saavedra, Et. Al.

Mechanical Engineering Faculty Publications

The reconstruction of craniomaxillofacial bone defects remains clinically challenging. To date, autogenous grafts are considered the gold standard but present critical drawbacks. These shortcomings have driven recent research on craniomaxillofacial bone reconstruction to focus on synthetic grafts with distinct materials and fabrication techniques. Among the various fabrication methods, additive manufacturing (AM) has shown significant clinical potential. AM technologies build three-dimensional (3D) objects with personalized geometry customizable from a computer-aided design. These layer-by-layer 3D biomaterial structures can support bone formation by guiding cell migration/proliferation, osteogenesis, and angiogenesis. Additionally, these structures can be engineered to degrade concomitantly with the new bone tissue …

Biomechanical Effects Of Worn-Out Shoe Outsoles And Insoles On The Human Foot, Yuka M. Iwashita, James A. Engebretson, Shreeshan Jena

College of Engineering Summer Undergraduate Research Program

The combination of outsole, midsole and insole layers of new shoes provide proper cushioning to the foot during the daily activities of life. Subsequently, the wear-based degeneration or damage to one or more of these sole layers can reduce the cushioning effect to the plantar surface of the foot. This reduction of cushioning effect can impact the distribution of stress concentration regions along the foot plantar surfaces and lead to foot pathologies. The present proposed research intends to study these effects of shoe-wear on the plantar surface of the human foot, using FEA (ABAQUS) and experimental methods. Commonly, the worn-out …

Assessing The Impact Of Femur Morphological Variations On Pediatric Hip Joint Biomechanics Using Statistical Shape Modeling, Tamara Chambers

Doctoral Dissertations and Master's Theses

This dissertation aimed to (1) quantify morphological variations in the pediatric hip joint and (2) evaluate the sensitivity of an infant musculoskeletal model (MSM) to these variations, considering hip joint center estimation errors. A shape statistical model (SSM) of decedent infant femurs from the Ortolani collection was created using ShapeWorks, capturing key morphological features, such as variations in the femoral neck-shaft and anteversion angles. Seven synthetic femurs were generated from the SSM to create SSM-informed MSMs, which were systematically evaluated through kinematics and kinetics analyses in OpenSim. Incorporating the SSM led to slight changes in the pediatric MSMs’ kinematics but …

Analysis Of Shock Absorption By Spring-Assisted Crutch Tips, Noah Hirschegger, Daegan Caime, Mohamed Atta

Senior Theses

Angel Consulting was originally created to address the problem of excessive wear and tear on the joints of individuals who use crutches for long periods of time. This company has sought to alleviate these issues with a proprietary spring-assisted crutch tip, which reduces the impact of crutch use and will hopefully be able to assist people in alleviating joint damage and discomfort. The team's main purpose is to determine an optimal metric for both marketability and effectiveness and to test the prototype design to ensure the validity of assistance for people who require chronic crutch use. To do this, we …

Validation Of Mobile Devices In Arbitrary Locations Against Force Plate Standard For Balance Assessment, German J. Ellsworth

Master's Theses

With balance assessment being essential to the prediction of fall risk and detection and assessment of motor disorders, increasing clinical accessibility to objective balance metrics is essential. Work has been done validating center of mass (COM) acceleration metrics against well regarded force plate center of pressure (COP) position standards for mobile device data acquisition systems, but most research is restricted to devices being close to the COM or strapped in a harness configuration. Through the use of rigid body kinematics and the inverted pendulum model, this study develops novel methodology for calculating COM acceleration using mobile devices in arbitrary positions, …

Collision Dynamics Of Compound Droplets In Microchannels: A Combined Numerical And Data-Driven Study, S M Abdullah Al Mamun

Dissertations

Understanding and predicting the hydrodynamic interactions of micron-scale droplets is crucial in a wide range of industrial and real-life applications, including microfluidics, pharmaceutics, drug delivery, food science, and enhanced oil recovery. These multi-phase and multi-scale phenomena are further complicated by the presence of core droplets of an immiscible fluid within shell droplets, known as compound droplets. The collisions and interactions of droplets in emulsions are influenced by various physical and geometric parameters, leading to distinct rheological and dynamic responses. This research employs numerical methods for a systematic parametric study of both simple and compound droplet pair collisions under confined shear …

Selective Bacterial Biofilm Removal Using Image-Guided Detection And Cold Atmospheric Pressure Plasma, Michael Okebiorun

Boise State University Theses and Dissertations

This dissertation explores the use of cold atmospheric pressure plasma (CAP) technology in eradicating bacterial biofilms from tissue surfaces, using Ps. fluorescens on chicken tissue to model human chronic wounds. It introduces a novel image-guided technique for precise biofilm removal, employing trypan blue staining coupled with advanced computer vision analysis, enhancing the CAP treatment's precision and efficacy. The study demonstrates the CAP device's ability to effectively disrupt biofilms through a non-thermal mechanism, based on its electrical characteristics and operational parameters. The success of the treatment is evident in the significant reduction of biofilm thickness of 49 -185 µm, with the …

A Kinematic Analysis Of The Shoulder During The Volleyball Attack Using Euler And Helical Axis Methods, Victoria Jolliff

Biomedical Engineering Theses & Dissertations

The shoulder is a complex joint with a wide range of motion, including flexion, extension, abduction, adduction, and internal and external rotation. In volleyball, repetitive overhand movements can cause shoulder overuse injuries. The primary offensive move, the attack, involves the approach, arm cocking, arm acceleration, and follow-through phases. Motion capture analysis and techniques like calculating Euler angles and rotation about a mean helical axis can evaluate shoulder movements. This study aimed to calculate shoulder movements during each phase of the volleyball attack using the Euler angle YXY sequence and the helical axis method. Different attack types, such as cross-court and …

Patient-Specific Musculoskeletal Modeling Of Total Shoulder Arthroplasty, Brendan M. Curran

Electronic Theses and Dissertations

Total shoulder arthroplasty (TSA) is often considered a surgery of last resort for patients with debilitating pathologies of the glenohumeral joint such as osteoarthritis, humeral head fracture, and advancing rotator cuff tears. TSA replaces the articulation between the humeral head and the glenoid fossa, with the goals of relieving pain and restoring function. Two types of total shoulder implants are available: Anatomic Total Shoulder Arthroplasty (aTSA) and Reverse Total Shoulder Arthroplasty (rTSA). TSA survivorship is lower than that of the survivorship seen in total knee and hip replacements [1]. Shoulder muscle moment arms and lines of action have been measured …

Statistical Modeling Of Knee Morphology And Material Properties Considering Diverse Populations, Gabrielle Jeannine Kindy

Electronic Theses and Dissertations

Total Knee Arthroplasty (TKA) is a widely performed surgical procedure aimed at alleviating pain and restoring function in patients with severe knee osteoarthritis. Despite its general success, disparities in postoperative outcomes have been observed across different racial and ethnic groups, with minority populations often experiencing less favorable results. One potential avenue for improving the generalizability of orthopaedic implants is using Statistical Shape and Intensity Models (SSIMs), which can be used to incorporate patient variability directly into the orthopaedic medical device development workflow through population-based finite element analysis.

This work aimed to construct an SSIM from a diverse subject set, incorporating …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Design And Implementation Of A Vision-Based Deep-Learning Protocol For Kinematic Feature Extraction With Application To Stroke Rehabilitation, Juan Diego Luna Inga

Master's Theses

Stroke is a leading cause of long-term disability, affecting thousands of individuals annually and significantly impairing their mobility, independence, and quality of life. Traditional methods for assessing motor impairments are often costly and invasive, creating substantial barriers to effective rehabilitation. This thesis explores the use of DeepLabCut (DLC), a deep-learning-based pose estimation tool, to extract clinically meaningful kinematic features from video data of stroke survivors with upper-extremity (UE) impairments.

To conduct this investigation, a specialized protocol was developed to tailor DLC for analyzing movements characteristic of UE impairments in stroke survivors. This protocol was validated through comparative analysis using peak …

Liftwalker, Kai A. De La Cruz, Lexie Caterine, Adam Monroe, Jame Whealan

Mechanical Engineering

The LiftWalker’s purpose is to lift users with degenerative diseases from a seated to standing position and support them as they practice the motion of walking as a form of physical therapy. The current LiftWalker is upward of $5,000 so we redesigned the LiftWalker to be more accessible around the world. This meant using affordable and accessible materials and manufacturing processes. To achieve this, we made our design mostly out of bike parts and off-the-shelf components. When it came to the lift system, we found that to maintain a safe and comfortable design it was best to purchase a trailer …

Snap It & Send It, Samantha Gonzales, Brienne Berger, Kelsea Clays, Jessica Schmok

Mechanical Engineering

This report details the final design, manufacturing and assembly, testing procedures and results, as well as future design recommendations of a device aimed at enhancing the mountain biking experience for individuals with limited thumb strength. This project particularly focused on the experience of our sponsor, Cal Poly Mechanical Engineering Professor Andrew Kean. Our team's objective was to create a secure, ergonomic handlebar grip system that does not require thumb strength and is adaptable to various mountain bike models. The final design utilizes a rigid hook that snaps onto mountain bike handlebars with a long, flat piece that slides into a …

Development Of A Deep Learning Algorithm Using Electromyography (Emg) And Acceleration To Monitor Upper Extremity Behavior With Application To Individuals Post-Stroke, Nathan Dodd

Master's Theses

Stroke is a chronic illness which often impairs survivors for extended periods of time,

leaving the individual limited in motor function. The ability to perform daily activities

(ADL) is closely linked to motor recovery following a stroke. The objective of

this work is to employ surface electromyography (sEMG) gathered through a novel,

wearable armband sensor to monitor and quantify ADL performance. The first contribution

of this work seeks to develop a relationship between sEMG and and grip

aperture, a metric tied to the success of post-stroke individuals’ functional independence.

The second contribution of this work aims to develop a deep …

Passive Mechanical Properties Of Cardiac And Arterial Tissue: A Paired Comparison Study In A Calf Model, Ola Alsaadi, Jieyang Zhang, Masod Sadipour, Ali N. Azadani

DU Undergraduate Research Journal Archive

Purpose: The mechanical behavior of heart tissue plays a crucial role in elucidating cardiac physiology and pathophysiology. Accurate measurement of the mechanical properties of cardiac and arterial tissues is indispensable for advancing computer simulations and developing medical devices. This study aimed to assess the passive mechanical properties of cardiac and arterial tissue in a calf model using a paired comparison method.

Methods: A planar biaxial stretching device was used to determine the mechanical characteristics of 84 square specimens obtained from 14 different anatomical regions. Cauchy stress-Green strain curves were constructed for each anatomical area, and a Fung-type constitutive …

Pulse Modulation In Braided Pneumatic Actuators Mimics Contractile Behavior Of Biological Muscles, Mohamad Elzein

Student Research Symposium

Advancements in robotics and bioengineering aim to emulate biological muscle systems through robotic actuators, blending mechanical strength with biological adaptability. A lesser-explored aspect is mimicking the pulse-like control characteristic of biological muscles, which contract in response to action potentials from motoneurons, with muscle contractile force relying heavily on the timing between these potentials. This study explores the effect of pulse lengths and the gaps between pulses on braided pneumatic actuators (BPAs), which mimic the nonlinearity and dynamic response of biological muscles. It hypothesizes that artificial muscles utilizing pulse-based control will exhibit a similar force dependency on the intervals between pulses …

Presence Of Atheromatous Plaques And Theirs Effects On The Blood Flow, Belhocine Mostefa Bm, Amrani Hichem Ah, Fedaoui Kamel Dr, Mazouz Hammoudi Mh

Emirates Journal for Engineering Research

The paper utilizes a finite element method to study both the blood flow and atheromatous plaques. Specifically, the COMSOL finite element package is employed to achieve a fluid model. COMSOL is a powerful finite element tool commonly used in various research and industrial domains to study multiphysics problems. The focus of the investigation is on the geometric aspects of the atheromatous plaques. The study considers different forms and arrangements of stenosis, taking into account the irregularities formed by various shapes of the plaques and the resulting flow patterns. The key findings of the research suggest that the pressure and velocity …

Dna/Carbon Nanotube Hybrid Structure And Their Translocation Through A Nanochannel, Daniel Christoffel Viljoen

Graduate Theses and Dissertations

DNA sequencing is of major importance as it is used in fields such as species differentiation, personalized medicine and food safety. Currently sequencing by synthesis is the most popular commercial method of sequencing DNA while Oxford nanopore’s protein based nanopores are the only portable commercial method. Current nanopore based devices have three main issues: Spacial resolution, translocation rate versus sensor strength and dealing with the persistence length of ssDNA. This thesis contributes to ongoing research that aims to create a nanochannel with integrated sensor based sequencing device. The project has two main objectives. The first objective is to improve the …

Environment And Response Of 3d-Encapsulated Mesenchymal Stem Cells To Mechanical Loading, Augustus Greenwood

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis explores the micromechanical environment induced when cyclically compressing hydrogels via finite element modeling and experimentally on the impact of loading on mesenchymal stem cells (MSCs) when encapsulated withing 3D hydrogel matrices. Degenerative joint diseases, characterized by cartilage degradation, present significant challenges due to cartilage's limited self-repair capacity. Innovative approaches, including stem cell-based therapies and engineered biomaterials, have emerged as promising strategies for cartilage repair and regeneration. This work specifically investigates the calibration of a bioreactor, the uniformity of load response across the hydrogel constructs via finite element modeling (FEM), and the stress response of MSCs subjected to various …

Model-Based Comparison Of Biological Organism And Electro-Mechanical System Resiliency Strategies, Nicholas Ratycz

Mechanical Engineering Undergraduate Honors Theses

Bio-inspired design has been used by many engineers to solve difficult problems or to make manufacturing processes more efficient. Biomimetics is the study of implementing the structure or function of biological substances, materials, mechanisms, and processes onto artificial ones that mimic the original. The goal of the BIASD tool is to provide bio-inspiration for engineers by studying the fault-adaptive strategies that biological systems use, rather than just their structure or function. In this thesis, the fault adaptive strategies of both a biological example and that of a real cubesat are compared using three types of model-based system diagrams to show …