Biomechanical Engineering Commons^™

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

Gamified Gait Rehabilitation Via Real-Time Biofeedback And Adaptive Hip-Exoskeleton Control, Mariya Huzaifa Tohfafarosh

Theses

Gait impairments arise from systemic diseases, age-related degeneration, musculoskeletal dysfunctions, or neurological conditions. While traditional rehabilitation can be effective, they often face challenges such as high costs, inaccessibility, and low patient engagement. To address these challenges, my work introduces a virtual reality-based rehabilitation (VRBR) system, integrating real-time motion and electromyographic (EMG) muscle activation feedback with a gamified virtual environment for enhanced adaptability and engagement. The system includes a custom-designed hip-exoskeleton that provides adaptive spring-like assistance or resistance, supporting both mobility-impaired users and strength training. Assistance levels can be tuned to match the user's progress. Additionally, a custom pressure insole was …

Emg-Based Intraoperative Neuromonitoring Using Advanced Machine Learning Approaches, Abdalla Nabil Elsharkawy, Nourhan Zayed

Mechanical Engineering

Intraoperative neuromonitoring (IONM) plays a critical role in minimizing nerve damage during surgeries by providing real-time feedback on neural integrity. This study evaluated models associated with deep learning and machine learning models for electromyography classification of signal during intraoperative neuromonitoring (IONM). The CNNLSTM model achieved the highest accuracy (85.2%), outperforming traditional models like KNN (53%), RF (62%), and CNN (76%). This demonstrates the degree to which the CNN-LSTM model can gain insight into temporal and spatial dependencies throughout the EMG signals, which makes it optimal for real-time classification in IONM applications. This implies that deep learning techniques can improve surgical …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

Integrated Compliant Structure For A Hand Exoskeleton, Tristan R. Koopman

Honors Undergraduate Theses

This thesis presents the design and prototyping of a wearable hand exoskeleton that integrates a flexible structural framework to assist with hand movement while maintaining comfort and anatomical conformity. The goal was to create a device that supports tendon-driven actuation through a compliant structure, combining elements of rigidity and flexibility to match the natural geometry and motion of the human hand. Traditional hand exoskeletons often trade off motion for structure or vice versa. This project aims to bridge that gap with a hybrid compliant design that balances flexibility and support. The design process followed an iterative approach involving rapid prototyping …

Mechanically Cost-Effective Approach For Bipedal Walking In Robots Using Instantaneous Collision Angle, Smit R. Patel

UNLV Theses, Dissertations, Professional Papers, and Capstones

Humans, as bipedal locomotors, are effective at reducing the mechanical cost of transport (CoTmech) by adopting movement strategies and gaits that minimize energy expenditure for a given distance. By using different gaits at different speeds, leveraging their long spring-like tendons and muscle elasticity which store and release energy during movement, humans reduce the mechanical effort required for locomotion. Current locomotion solutions offered in bipedal robots, based on legacy walking and running gait models, are not great at energy efficiency unless walking at very low speeds. Additionally, the control system of robots, designed to ensure stability and adaptability, requires substantial resources, …

Shape Inverse Prediction Of Magnetic Field-Actuated Soft Robots By Neural Network Machine Learning, Lineth J. Perez Monsalve

Theses and Dissertations

Soft robotics has drawn tremendous interest in recent years because the compliance and motion of soft robotics enable biocompatibility and versatility for many applications, such as human-machine interaction, wearable and assistive devices, and health monitoring. This study introduces a novel predictive modeling approach using neural networks for shape control of magnetic soft robots. The robots are made of silicone materials embedded with hard magnetic particles, which respond to the external magnetic field provided by a ring-type of permanent magnet. These robots, free from physical connections to external devices, i.e., non-tethered actuation, hold significant potential for applications in healthcare, such as …

Modeling The Moisture Content And Drying Rate Of Zucchini (Cucurbita Pepo L.) In A Solar Hybrid Dryer Using Ann And Anfis Methods, Halil Nusret Bulus, Aytac Moralar, Soner Celen

The Philippine Agricultural Scientist

Estimating product drying kinetics is critical to obtain the best drying process without compromising product quality and necessitates the development of numerical drying models. This research aims to compare the prediction models developed using artificial neural network (ANN) and adaptive network-based fuzzy inference system (ANFIS), two popular machine learning approaches in the recent years. Zucchini slices were chosen as samples and dried in a solar-assisted microwave belt dryer at 0.245 m/min belt speed and microwave powers of 0.7, 1, and 1.4 kW. On the data set obtained by computing the moisture content and drying rate values, prediction models were developed …

Radiomic Features To Predict Overall Survival Time For Patients With Glioblastoma Brain Tumors Based On Machine Learning And Deep Learning Methods, Lina Chato

UNLV Theses, Dissertations, Professional Papers, and Capstones

Machine Learning (ML) methods including Deep Learning (DL) Methods have been employed in the medical field to improve diagnosis process and patient’s prognosis outcomes. Glioblastoma multiforme is an extremely aggressive Glioma brain tumor that has a poor survival rate. Understanding the behavior of the Glioblastoma brain tumor is still uncertain and some factors are still unrecognized. In fact, the tumor behavior is important to decide a proper treatment plan and to improve a patient’s health. The aim of this dissertation is to develop a Computer-Aided-Diagnosis system (CADiag) based on ML/DL methods to automatically estimate the Overall Survival Time (OST) for …

Design Of Human Inspired Feet For Mithra, A High-Performance Humanoid Robot, Spencer Lyle Brewster

Electronic Theses and Dissertations

This thesis explores the foot design for the new humanoid robot Mithra, with the goal to improve impact mitigation, natural gait throughout the gait cycle and balance. Using human gait parameters, a stiff aluminum foot was designed to emulate human center of pressure rollover trajectories. In addition, a 2D dynamic Finite Element Analysis (FEA) of the gait cycle was created in Abaqus to rapidly prototype foot designs. Data from the FE model provided impact forces, parameters for distal foot power evaluation and maximum lean angles. From this model a flexible nylon foot was optimized for the given design objectives. The …

Respiratory Compensated Robot For Liver Cancer Treatment: Design, Fabrication, And Benchtop Characterization, Mishek Jair Musa

Graduate Theses and Dissertations

Hepatocellular carcinoma (HCC) is one of the leading causes of cancer-related death in the world. Radiofrequency ablation (RFA) is an effective method for treating tumors less than 5 cm. However, manually placing the RFA needle at the site of the tumor is challenging due to the complicated respiratory induced motion of the liver. This paper presents the design, fabrication, and benchtop characterization of a patient mounted, respiratory compensated robotic needle insertion platform to perform percutaneous needle interventions. The robotic platform consists of a 4-DoF dual-stage cartesian platform used to control the pose of a 1-DoF needle insertion module. The active …

Fatigue Monitoring Through Wearable Sensors For Construction Workers, Srikanth Sagar Bangaru

LSU Doctoral Dissertations

About 40% of the US construction workforce experiences high-level fatigue, which leads to poor judgment, increased risk of injuries, a decrease in productivity, and a lower quality of work. Excessive fatigue from working in unpleasant working conditions, long working hours, or heavy workloads can aggravate fatigue's adverse effects, leading to work-related musculoskeletal disorders (WMSDs) and productivity loss. Therefore, it is essential to monitor fatigue to reduce the adverse effects and preventing long-term health problems. However, since fatigue demonstrates itself in several complex processes, there is no single standard measurement method for fatigue detection. This research aims to develop a system …

Automated And Standardized Tools For Realistic, Generic Musculoskeletal Model Development, Trevor Rees Moon

Graduate Theses, Dissertations, and Problem Reports (ETD)

Human movement is an instinctive yet challenging task that involves complex interactions between the neuromusculoskeletal system and its interaction with the surrounding environment. One key obstacle in the understanding of human locomotion is the availability and validity of experimental data or computational models. Corresponding measurements describing the relationships of the nervous and musculoskeletal systems and their dynamics are highly variable. Likewise, computational models and musculoskeletal models in particular are vitally dependent on these measurements to define model behavior and mechanics. These measurements are often sparse and disparate due to unsystematic data collection containing variable methodologies and reporting conventions. To date, …

The Affective Perceptual Model: Enhancing Communication Quality For Persons With Pimd, Jadin Tredup

UNLV Theses, Dissertations, Professional Papers, and Capstones

Methods for prolonged compassionate care for persons with Profound Intellectual and Multiple Disabilities (PIMD) require a rotating cast of import people in the subjects life in order to facilitate interaction with the external environment. As subjects continue to age, dependency on these people increases with complexity of communications while the quality of communication decreases. It is theorized that a machine learning (ML) system could replicate the attuning process and replace these people to promote independence. This thesis extends this idea to develop a conceptual and formal model and system prototype.

The main contributions of this thesis are: (1) proposal of …

Estimation And Prediction Of The Human Gait Dynamics For The Control Of An Ankle-Foot Prosthesis, Guilherme Aramizo Ribeiro

Dissertations, Master's Theses and Master's Reports

With the growing population of amputees, powered prostheses can be a solution to improve the quality of life for many people. Powered ankle-foot prostheses can be made to behave similar to the lost limb via controllers that emulate the mechanical impedance of the human ankle. Therefore, the understanding of human ankle dynamics is of major significance. First, this work reports the modulation of the mechanical impedance via two mechanisms: the co-contraction of the calf muscles and a change of mean ankle torque and angle. Then, the mechanical impedance of the ankle was determined, for the first time, as a multivariable …

Estimation Of Multi-Directional Ankle Impedance As A Function Of Lower Extremity Muscle Activation, Lauren Knop

Dissertations, Master's Theses and Master's Reports

The purpose of this research is to investigate the relationship between the mechanical impedance of the human ankle and the corresponding lower extremity muscle activity. Three experimental studies were performed to measure the ankle impedance about multiple degrees of freedom (DOF), while the ankle was subjected to different loading conditions and different levels of muscle activity. The first study determined the non-loaded ankle impedance in the sagittal, frontal, and transverse anatomical planes while the ankle was suspended above the ground. The subjects actively co-contracted their agonist and antagonistic muscles to various levels, measured using electromyography (EMG). An Artificial Neural Network …

Control Of A Powered Ankle-Foot Prosthesis: From Perception To Impedance Modulation, Guilherme Aramizo Ribeiro

Dissertations, Master's Theses and Master's Reports

Active ankle prostheses controllers are demonstrating gaining smart features to improve the safety and comfort offor users. The perception of user intention to modulate the ankle dynamics is a well-known example of such feature. But not much work focused on the perception of the environment, nor how the environment should be included in the mechanical design and control of the prosthesisprostheses. The proposed work aims to improve the feasibility of integrate the environment perception integration intoto the prostheses controllersler, and to define the desired ankle dynamics, as mechanical impedance, duringof the human walk on different environmental settings. As a preliminary …

Using Lower Extremity Muscle Activations To Estimate Human Ankle Impedance In The External-Internal Direction, Lauren N. Knop

Dissertations, Master's Theses and Master's Reports

For millions of people, mobility has been afflicted by lower limb amputation. Lower extremity prostheses have been used to improve the mobility of an amputee; however, they often require additional compensation from other joints and do not allow for natural maneuverability. To improve upon the functionality of ankle-foot prostheses, it is necessary to understand the role of different muscle activations in the modulation of mechanical impedance of a healthy human ankle. This report presents the results of using artificial neural networks (ANN) to determine the functional relationship between lower extremity electromyography (EMG) signals and ankle impedance in the transverse plane. …

An Emg-Based Patient Monitoring System Using Zynq Soc Device, Farhad Fallahlalehzari

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis describes the design, development, and testing of an EMG-based patient monitoring system using the Zynq device. Zynq is a system on chip device designed by Xilinx which consists of an ARM dual cortex-A9 processor as well as an FPGA integrated into one chip. This work also analyzes the performance of image-processing algorithms on this system and compares that performance to more traditional PC-based systems. Image processing algorithms, such as Sobel edge detection, dilation and erosion, could be used in conjunction with a camera for the patient monitoring purposes. These algorithms often perform sub-optimally on processors because of their …

In-Shoe Plantar Pressure System To Investigate Ground Reaction Force Using Android Platform, Ahmed A. Mostfa

Theses and Dissertations

Human footwear is not yet designed to optimally relieve pressure on the heel of the foot. Proper foot pressure assessment requires personal training and measurements by specialized machinery. This research aims to investigate and hypothesize about Preferred Transition Speed (PTS) and to classify the gait phase of explicit variances in walking patterns between different subjects. An in-shoe wearable pressure system using Android application was developed to investigate walking patterns and collect data on Activities of Daily Living (ADL). In-shoe circuitry used Flexi-Force A201 sensors placed at three major areas: heel contact, 1st metatarsal, and 5th metatarsal with a PIC16F688 microcontroller …

Designing A Biomimetic Testing Platform For Actuators In A Series-Elastic Co-Contraction System, Ryan Tyler Schroeder

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actuators determine the performance of robotic systems at the most intimate of levels. As a result, much work has been done to assess the performance of different actuator systems. However, biomimetics has not previously been utilized as a pretext for tuning a series elastic actuator system with the purpose of designing an empirical testing platform. Thus, an artificial muscle tendon system has been developed in order to assess the performance of two distinct actuator types: (1) direct current electromagnetic motors and (2) ultrasonic rotary piezoelectric motors. Because the design of the system takes advantage of biomimetic operating principles such as …

Polygrasp: Reach; Myoelectric Prosthetic Hand Iteration, Devon Patrick Augustus, Mighells Blaed Deuel, Ian Noel Fraser, Nicholas Philip Moesser

Mechanical Engineering

Amputations are a common occurrence in soldiers returning home who have suffered the effects of IED and munitions explosions. For upper limb amputees, trans-radial amputations are the most common. Traditional hook devices do not offer an adequate level of normalcy for users, prompting the use of myoelectric devices. While current myoelectric devices do offer a more natural experience, they come with a host of other problems that makes their adoption by service personnel not desirable or not permitted by the VA. PolyGrasp Reach seeks to reduce weight and cost and improve performance. This addresses several of the issues with devices …