Biomechanical Engineering Commons^™

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

Wearable Sensor System Used To Measure Linear And Angular Acceleration Of The Head Of American Football Players, David A. Emerson

LSU Master's Theses

American football players are repeatedly subject to high-velocity impacts; collisions can exceed 100 g in the NFL [1]. Rotational accelerations of the head caused by high-velocity collisions have been proven to be extremely damaging to the highly organized brain fibers at the brain-skull interface [2]. The sensor system (SS) measures the nonplanar acceleration at four locations on a chin strap using ADXL314 accelerometers and utilizes rigid-body kinematics to estimate the head rotational state from the measured acceleration of the SS [3]. The SS was validated through progressive testing, including steady-state, linear impact, and rotational impact testing. The ADLX314 sensor exhibited …

Long-Term Simulation Of Stem Cell Mechanobiology, Manoochehr Rabiei

Mechanical and Aerospace Engineering Dissertations - Archive

An accurate representation of cellular mechanobiology necessitates the inclusion of subcellular elements characterized by minute masses and dimensions. These minute objects yield multiscale dynamic models with disproportionate terms, which require inordinate amounts of computational time to simulate. The computational requirements limit the time span of the simulation to time histories shorter than one second, even when employing supercomputers. This work presents a high-speed approach to simulating the mechanobiology of stem cells. The proposed approach separates the computational time from the size, and distribution, of masses of the subcellular elements, enabling the simulation of weeks-long cellular processes within hours on a …

Computational Study On The Acoustic Footprint Of Stenosis In Larger Arteries, Ahmed Abdelnabi

Theses and Dissertations

We identify a new (acoustic) frequency-stenosis relations whose frequencies fall within the recommended auscultation threshold for stethoscopy (< 120 Hz) in this study. We demonstrate that these relations can be used to extend the application of phonoangiography (the measurement of the degree of stenosis from bruits) to stethoscopes that are broadly available. The First relationship is successfully identified using an analysis limited to the acoustic signature of the von Karman vortex street, which we automatically isolate using a metric based on an area-weighted average of the Q-criteria for the post-stenotic region. Specifically, we conduct LES-CFD simulations on simplified 2D internal flow geometries that represent blood vessels with varying degrees of stenosis. Then, using the Ffowcs Williams-Hawkings (FW-H) equation, we extract their emitted acoustic signals, which we subtract from a pure signal (stenosis-free) at the same heart rate. Next, we transform this differential signal to the frequency domain and meticulously classify its acoustic signatures according to six stenosis-invariant flow phases of a cardiac cycle. Using our Q-criterion-based metric, we then automatically restrict our acoustic analysis to the noises emitted by the von Karman vortex street (phase 4). Our analysis of its acoustic signature demonstrates a strong linear relationship between the degree of steno- sis and its dominant frequency, which differs significantly from the break frequency and heart rate (previously identified dominant frequencies). For the Second relationship, we develop a frequency-stenosis scaling law for particularly supravalvular aortic stenosis that falls within the preferred frequency range (30-120 Hz) for echocardiography. We expand to 3D patient specific geometry using Simulia’s Living Heart Human Model (LHHM), which has an anatomically accurate aorta geometry. This LHHM geometry is modified with stenoses ranging from 30 to 80 percent (moderate to severe). For physiologically consistent hemodynamic boundary conditions, we expand the study to employ the Windkessel model, which has been implemented on Fluent using UDF. We demonstrate that physiological boundary conditions reduce simulation time significantly compared to static boundary conditions. The FW-H model extracted the flow-generated acoustic signal of the stenotic geometries and analysed it at clinically relevant receiver locations. A preferred receiver location consistent with clinical practise is determined, and a correlation between the degree of stenosis and the prevalent acoustic frequency (within the frequency range of 70-120 Hz) is established. The obtained second scaling law is shown to be clinically reliable in assessing stenotic severity. Future research will investigate incorporating the vibroacoustic role of adjacent organs and tissue to expand the clinical applicability of our findings. Expansion of clinical and numerical datasets will be pursued in future research to enhance the reliability of our scaling law, possibly by leveraging much-needed ML-based acceleration schemes.

A Proof Of Concept For Detection Of Palato-Lingual Contact Without Intraoral Electrodes In A Human Participant, Amitava Biswas

Master's Theses

The author of this thesis conceived and investigated an unexpected electrical signal that may not be noticed during regular electroglottography (EGG) when electrodes are conventionally placed on the anterior surface of the throat. It appears that there is a measurable electrical signal from the EGG equipment when electrodes are placed over the frontal cheek (belly of zygomatic muscle), and the tongue is elevated to contact the hard palate, or the tongue is lowered to break the contact. Therefore, this phenomenon is designated as unconventional electroglottography (UEGG, Dr. Steven Cloud, private communication, July 17, 2022).

Two distinctive patterns of waveforms were …

Engineered Material Systems For Mimicking Tissue And Disease, Margrethe Ruding

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis comprises two studies involving design and application of soft material systems. The goal of the first study was to design, fabricate, and characterize hydrogel lattice structures with consistent, controllable, anisotropic mechanical properties. Lattices, based on four types of unit cells (cubic, diamond, vintile, and Weaire-Phelan), were printed using stereolithography (SLA) of polyethylene glycol diacrylate (PEGDA). In order to create structural anisotropy in the lattices, unit cell design files were scaled in one direction by a factor of two in each layer and then printed. The mechanical properties of the scaled lattices were measured in shear and compression and …

Modeling Human Control Behavior In Command-Following Tasks, Sajad Koushkbaghi

Theses and Dissertations--Mechanical and Aerospace Engineering

Humans interact with a variety of complex dynamic systems on a daily basis. However, they are often the lesser understood component of human-in-the-loop (HITL) systems. In this dissertation, we present the results of two HITL experiments to investigate the control strategies that humans use when performing command-following tasks. The first experiment is designed to investigate the control strategies that humans use to interact with nonlinear dynamic systems. Two groups of human subjects interact with a dynamic system and perform a command-following task. One group interacts with a linear time-invariant (LTI) dynamic system and the other group interacts with a Wiener …

3-D Positioning System For Trackable Adjustments Of Papillary Muscles, Ryan Michael Winters, Micaela Andrea Bataclan, Christine Do, Giselle Morales

Biomedical Engineering

Redacted.

Magnetic Gradient-Based Magnetic Tweezer System For 3d And Swarm Control Of Microswimmer, Xiao Zhang

Mechanical Engineering Research Theses and Dissertations

Microscale manipulation has very promising potential in medical applications such as drug delivery, minimal and invasion surgery. Contactless control is preferable as remote manipulation is necessary for in vivo applications. Among different control methods, magnetic power source is more suitable and robust for the applications mentioned above. Presented here is a magnetic tweezer system, which manipulates microscale magnetic particles using magnetic forces created by magnetic field gradient. The proposed system has three advantages: First, force applied by the magnetic tweezer system does not contact with the target object and can be generated in different directions. Second, the magnetic tweezer system …

Microparticle Propulsion For In Vivo Navigation, Louis Rogowski

Mechanical Engineering Research Theses and Dissertations

Microscale propulsion impacts a diverse array of fields, with simplistic microrobots allowing for novel innovations in microscale surgery and drug delivery. Propulsion at the microscale is constrained by physics, with time-reversal and geometric symmetries limiting available propulsion mechanisms. However, certain fluid environments and surface coatings allow for the propulsion of microparticles through externally applied magnetic fields. Presented here is a detailed analysis of microparticles propelling using spontaneous symmetry breaking, flagella surface coatings, and multi-modal actuation mechanisms. Spontaneous symmetry breaking in nonlinearly viscoelastic fluids is presented for the first time in literature, with two equal and opposite propulsion states existing along …

Control And Locomotion Of Inertially And Magnetically Actuated Multi-Scale Robotic Systems, Ehab Al Khatib

Mechanical Engineering Research Theses and Dissertations

In this research, two actuation systems were introduced, inertial and magnetic actuation. In the inertial actuation, the robot used the transfer of momentum to navigate, and this momentum could be generated by spinning masses and wheels. Recent studies in our System Laboratory proved that a wide range of inertially actuated locomotion systems could be generated. This can be achieved by using a family tree approach, starting from a very simple system, and progressively evolving it to more complex ones. The motion diversity of these robots inspired us to extend their locomotion from a macro scale to millimeter and micro scales. …

Kinematic Analysis Of Forehand Drop Shot And Long Shot Services In Table Tennis, Ibrahim Norzuria

Student Works (2020-2029)

Table tennis is one of the most widely played sports in the world. A frequent hand movement is compulsory to execute stroke than other limbs, especially the projection of racket and ball speeds,which can help to improve players’ performance. Until now, research on table tennis serving is limited. Service was assumed important in table tennis because the effective serve may allow the serving player to have advantage and control over the game. The 3D dynamic analysis is the appropriate method to analyze a sport activity such as table tennis. Therefore, the aim of research was to determine the kinematic involved …

Adaptable Clean Energy Laboratory, Joao Marcelo Rocha Belmonte, Marc D. Compere

Sustainability Conference

The Adaptable Clean Energy (ACE) Lab is a real-world, long term, test platform that will guide the courses of the Energy Systems track. The lab will provide realistic electrical and HVAC loads that mimic a solar powered office. The lab is a 20’ high cube shipping container modified with a door, windows, lights computers, air conditioner and appliances. The lab is Net-Zero and powered entirely from the sun. Two insulation test sections expose the exterior walls for research access to real external heat loads in a real building

Automated And Standardized Tools For Realistic, Generic Musculoskeletal Model Development, Trevor Rees Moon

Graduate Theses, Dissertations, and Problem Reports (ETD)

Human movement is an instinctive yet challenging task that involves complex interactions between the neuromusculoskeletal system and its interaction with the surrounding environment. One key obstacle in the understanding of human locomotion is the availability and validity of experimental data or computational models. Corresponding measurements describing the relationships of the nervous and musculoskeletal systems and their dynamics are highly variable. Likewise, computational models and musculoskeletal models in particular are vitally dependent on these measurements to define model behavior and mechanics. These measurements are often sparse and disparate due to unsystematic data collection containing variable methodologies and reporting conventions. To date, …

System Integration Of C-Arm Robotic Prototype Using Motion Capture Guidance For Accurate Repositioning, Alireza Yazdanshenas

Mechanical Engineering Theses

One of the important surgical tools in spinal surgery is the C-Arm X-ray System. The C-Arm is a large “C” shaped and manually maneuvered arm that provides surgeons and X-ray technicians the ability to take quick quality X-rays during surgery. Because of its five degrees of freedom, the C-Arm can be manually maneuvered around the patient to provide many angles and perspectives, ensuring surgical success.

This system works fine for most surgical procedures but falls short when the C-Arm must be moved out of the way for complicated surgical procedures.

The aim of this thesis is to develop an accurate …

Investigation Of Fundamental Principles Of Rigid Body Impact Mechanics, Khalid Alluhydan

Mechanical Engineering Research Theses and Dissertations

In impact mechanics, the collision between two or more bodies is a common, yet a very challenging problem. Producing analytical solutions that can predict the post-collision motion of the colliding bodies require consistent modeling of the dynamics of the colliding bodies. This dissertation presents a new method for solving the two and multibody impact problems that can be used to predict the post-collision motion of the colliding bodies. Also, we solve the rigid body collision problem of planar kinematic chains with multiple contacts with external surfaces.

In the first part of this dissertation, we study planar collisions of Balls and …

A Biomimetic Approach To Controlling Restorative Robotics, Matthew T. Boots

Graduate Theses, Dissertations, and Problem Reports (ETD)

Movement is the only way a person can interact with the world around them. When trauma to the neuromuscular systems disrupts the control of movement, quality of life suffers. To restore limb functionality, active robotic interventions and/or rehabilitation are required. Unfortunately, the primary obstacle in a person’s recovery is the limited robustness of the human-machine interfaces. Current systems rely on control approaches that rely on the person to learn how the system works instead of the system being more intuitive and working with the person naturally. My research goal is to design intuitive control mechanisms based on biological processes termed …

Wheelie King Trainer And Controller, Michael C. Uytingco, Paul E. Hubner, Dmitriy Petrovykh

Mechanical Engineering

The ``wheelie'' is a popular, classic bicycle trick which novice bicyclists often attempt as an introduction to advanced bike tricks. However, many are hesitant to try due to the risks and safety hazards associated with performing one. The purpose of this project is to create an on-board system which will assist a user in maintaining a wheelie after achieving the required position while incorporating safety mechanisms to prevent the user from injuring themselves or others. Additional requirements of the system are non-obstructive features and seamless transitioning between wheelie conditions.

Upon researching the state of wheelie technology, existing products, such as …

Soft-Microrobotics: The Manipulation Of Alginate Artificial Cells, Samuel Sheckman

Mechanical Engineering Research Theses and Dissertations

In this work, the approach to the manipulation of alginate artificial cell soft-microrobots, both individually and in swarms is shown. Fabrication of these artificial cells were completed through centrifugation, producing large volumes of artificial cells, encapsulated with superparamagnetic iron oxide nanoparticles; these artificial cells can be then externally stimulated by an applied magnetic field. The construction of a Permeant Magnet Stage (PMS) was produced to manipulate the artificial cells individually and in swarms. The stage functionalizes the permanent magnet in the 2D xy-plane. Once the PMS was completed, Parallel self-assembly (Object Particle Computation) using swarms of artificial cells in complex …

Modeling Of Swimming Cells From Nano-Scale To Micro-Scale, Yicheng Zhao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Certain human genetic diseases -- primary ciliary dyskinesia, infertility, and hydrocephalus -- are characterized by changes in beat frequency and waveform of cilia and flagella. Chlamydomonas reinhardtii, which is a single-cell green alga about ten micrometers in diameter that swims with two flagella, serves as an excellent biological model because its flagella share the same structure and genetic background as mammalian cilia and flagella. This study uses the finite element method to investigate the behavior of C. reinhardtii swimming from nano-scale to micro-scale. At the device-level, micro-scale modeling indicates that well-designed acoustic microfluidic devices can be used to trap groups …

Nonlinear Model-Based Control For Neuromuscular Electrical Stimulation, Ruzhou Yang

LSU Doctoral Dissertations

Neuromuscular electrical stimulation (NMES) is a technology where skeletal muscles are externally stimulated by electrodes to help restore functionality to human limbs with motor neuron disorder. This dissertation is concerned with the model-based feedback control of the NMES quadriceps muscle group-knee joint dynamics. A class of nonlinear controllers is presented based on various levels of model structures and uncertainties. The two main control techniques used throughout this work are backstepping control and Lyapunov stability theory.

In the first control strategy, we design a model-based nonlinear control law for the system with the exactly known passive mechanical that ensures asymptotical tracking. …

Electroencephalographic Signal Processing And Classification Techniques For Noninvasive Motor Imagery Based Brain Computer Interface, Md Erfanul Alam

College of Graduate Studies: Theses & Dissertations

In motor imagery (MI) based brain-computer interface (BCI), success depends on reliable processing of the noisy, non-linear, and non-stationary brain activity signals for extraction of features and effective classification of MI activity as well as translation to the corresponding intended actions. In this study, signal processing and classification techniques are presented for electroencephalogram (EEG) signals for motor imagery based brain-computer interface. EEG signals have been acquired placing the electrodes following the international 10-20 system. The acquired signals have been pre-processed removing artifacts using empirical mode decomposition (EMD) and two extended versions of EMD, ensemble empirical mode decomposition (EEMD), and multivariate …

Simulation Of Human Ankle Trajectory During Stance Phase Of Gait, Leslie Castelino

Dissertations, Master's Theses and Master's Reports

A simulation was developed which mimics the human gait characteristics based on the input of an individual’s gait trajectory. This simulation also estimates the impedance of the human ankle based on the ground reaction forces measured by the force plate. This simulation will accept alterations of the following parameters: total body weight, weight of the shank, weight of the foot, trajectories of the shank and foot of the individual and orientation of the force plate, which would generate a new gait trajectory for the ankle during the stance phase of gait. The goal of this simulation was to validate the …

Team Nathan Suspension, Frankie J. Wiggins, Alex D. Seitz, Justin P. Bautista

Mechanical Engineering

Nathan Cooper is an 8-year old boy with Spinal Muscular Atrophy (SMA). SMA has affected Nathan’s muscle development and requires him to use the Standing Dani™ mobility device. The Standing Dani is a motorized standing wheelchair, or Wheelstand. Nathan controls and uses it to get around. Though the Standing Dani performs well for most functions, it has some distinct issues. The primary issue that this project addresses is its lack of suspension and the discomfort that Nathan feels as a result. After talking with our client, we developed several specifications generally related to geometry, safety, vehicle dynamics, and reliability. Many …

Intelligibility Of Electrolarynx Speech Using A Novel Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. Following a laryngectomy, some people speak using an electrolarynx which replaces the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the buzzing monotonic sound emitted, the need for a free hand to operate the device, and difficulty experienced by many laryngectomees in adapting to its use. Despite these shortcomings, it remains the preferred method of speech rehabilitation for a substantial minority of laryngectomees. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal …