Biomechanical Engineering Commons^™

An Experimental Study Of The Morphology Of Dna-Carbon Nanotube Hybrid Structures In Direct Dna Sequencing, Avery P. Davis

Biomedical Engineering Undergraduate Honors Theses

Hybrid structures formed between single-stranded DNA (ssDNA) and single-walled carbon nanotubes (SWCNT) have emerged as promising components in future direct DNA sequencing technologies due to their unique morphological and electronic properties. The nanoscale configuration of these hybrids, including the DNA wrapping angle, pitch, and contour behavior, directly influences their potential for stable electronic readout. This thesis presents an experimental study of DNA-SWCNT hybrid morphology using a fixed, reproducible wrapping protocol designed to minimize environmental variability and isolate the influence of DNA nucleotide sequence on hybrid structure. As described in prior work, this protocol produces well-dispersed hybrids suitable for high-resolution imaging. …

Effects Of A Passive Assistive Hamstring Device On Overground Running Kinematics And Hamstring Activation., Quinn Castner

All Theses

Hamstring strain injuries are among the most common and recurring injuries in sports, occurring most often during the terminal swing phase of gait. Despite progress in rehabilitation, the incidence of injury has only increased, suggesting a need for a novel intervention. We designed a passive, assistive, wearable device with two specific criteria in mind: to offload the hamstrings during running, and do so without hindering normal kinematic patterns. The device consists of an adjustable elastic band anchored proximally at the waist and distally just above the ankle joint center. It stretches and shortens with the hamstrings, providing passive hip extension …

Exercise-Induced Muscle Damage As A Model For Exploring The Effects Of Pain On Gait, Sydney Savage

All Theses

Persistent gait asymmetry following anterior cruciate ligament reconstruction (ACLR) is a recognized contributor to post-traumatic knee osteoarthritis, yet the independent role of pain in driving altered movement patterns remains poorly understood due to confounding factors inherent to clinical populations. This study used exercise-induced muscle damage (EIMD) as a controlled experimental model to isolate the effects of musculoskeletal pain on gait, independent of kinesiophobia, structural damage, and proprioceptive disruption. Eighteen healthy adults underwent unilateral eccentric calf-raise protocols to induce delayed onset muscle soreness (DOMS), with gait assessed at baseline, 48 hours, and 168 hours post-exercise using bilateral inertial measurement units. Outcomes …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Combining Haptic Feedback With Electromyography To Study Knee Injury In Stationary Cycling, Christopher Kirby

Honors Theses

Patellofemoral Pain Syndrome (PFPS) is the most prevalent overuse injury in cycling, often linked to altered neuromuscular activation patterns of the quadriceps and hamstrings. While sensory feedback has successfully modified cyclists posture, there is a critical lack of evidence-based interventions targeting the underlying muscle activation imbalances associated with chronic knee pain. This study aimed to develop and validate a novel, real-time biofeedback system that utilizes electromyography (EMG) to trigger vibrotactile cues, aiming to shift muscle onset timing earlier in the pedal stroke to mitigate PFPS-related imbalances. A closed-loop system was engineered by integrating a Delsys EMG system with a SageMotion …

Microgravity-Induced Alterations In Left Atrial Hemodynamics And Thrombogenic Risk: Insights From Healthy And Atrial Fibrillation Models, Grace M. Hoeppner

Dissertations, Master's Theses and Master's Reports

Background: Microgravity exposure alters cardiovascular loading, yet its impact on left atrial flow dynamics and thrombotic risk remains poorly understood. This study investigates how spaceflight-relevant microgravity-induced changes in cardiac outflow affect left atrial hemodynamics in healthy individuals and patients with atrial fibrillation.

Methods: Patient-specific left atrial models were generated for three healthy individuals and three AF patients. Computational fluid dynamics (CFD) simulations were performed using each patient’s baseline mitral outflow waveform and two modified waveforms representing short- and long-duration post-flight cardiac loading changes derived from echocardiographic observations. Hemodynamic metrics included left atrial velocity, time averaged wall shear stress, oscillatory shear …

Recreating Fiber Recruitment With Fiber Recruitment Using Additive Manufacturing, Natalia D. Mciver

Biomedical Engineering ETDs

Injured ligaments are often repaired with tendon grafts which may over or under constrain the joint; there is a need for an artificial graft option with the mechanical properties of a native ligament. Crimped fibers within ligaments allow for recruitment which means the viscoelastic properties of stress relaxation and creep are not inversely related. A feasibility study using ACLs and large-scale crimp models to study viscoelasticity, led to an in-depth analysis of the scapholunate interosseous ligament. Using the Modified Kelvin spring-dashpot model, for describing viscoelasticity with a variable stiffness property (time dependent fiber recruitment), we defined the relationship between creep …

Influence Of Obesity On Knee Joint Mechanics: A Subject-Specific Musculoskeletal Modeling Approach, Ryan C. Knowles

Electronic Theses and Dissertations

Obesity has been consistently linked to knee osteoarthritis (KOA), a debilitating joint disease. While prior work has shown that obese individuals often walk with altered biomechanics compared to normal-weight (NW) individuals, which may accelerate KOA progression, less is known about how these mechanics affect load distribution between the medial and lateral tibiofemoral (TF) compartments, particularly during higher-demand activities. This study developed subject-specific musculoskeletal models of five obese and five NW individuals, incorporating CT-based bone measurements and individualized joint contact points. Simulations were driven by six degree-of-freedom (6DOF) kinematics obtained from high-speed stereo radiography (HSSR) to predict TF loading and associated …

Towards Improving Computational Modeling Of The Lumbar Spine - Impact Of Material Properties And Laminotomy On Spinal Biomechanics, Isaac K. Kumi

Mechanical & Aerospace Engineering Theses & Dissertations

Spinal ligaments play a crucial role in maintaining the mechanical stability of the lumbar spine. These dense, collagenous tissues not only resist excessive motion but also distribute loads between spinal components to protect neural structures. Traditionally, the mechanical response of ligaments has been modeled using linear elastic assumptions, which treat the tissue as having a constant stiffness regardless of loading history. While this simplifies analysis, it fails to capture the time-dependent behaviors, such as creep, stress relaxation, and hysteresis, that are characteristic of biological tissues.

Viscoelastic modeling may provide a more physiologically accurate representation by incorporating both elastic and viscous …

Advancing Tka Biomechanics: From Joint Simulator To Boundary Condition Development, Yashar Ali Behnam

Electronic Theses and Dissertations

This dissertation addresses four specific aims that collectively attempted to advance the experimental and computational analysis of total knee arthroplasty (TKA) components. The first study focused on the development of a novel whole knee joint simulator capable of simultaneous tibiofemoral and patellofemoral knee loading. This simulator employs custom fixturing to facilitate dynamic, unconstrained, muscle-driven PF articulation alongside controlled TF contact mechanics. Validation against experimental measurements showed strong agreement, demonstrating the simulator's potential as a valuable tool for future TKA design and surgical technique investigations.

The second study verified implant-specific physiological boundary conditions which accurately simulate activities of daily living using …

The Design Of A Bioinspired Impact Mitigation System Towards The Prevention Of Brain Injuries, Bryce H. Reimer

Master’s Theses

Traumatic brain injuries (TBIs), including concussions and chronic traumatic encephalopathy (CTE), remain a major concern across contact sports, military operations, and transportation. Despite advancements in protective equipment, current strategies often fall short in preventing the mechanical conditions that contribute to long-term neurological damage. This thesis presents the design and validation of a bioinspired impact mitigation system modeled after bighorn sheep horn structures, which have evolved to endure high-energy collisions without apparent brain injury.

Using biomimetic principles, the research integrates experimental and computational methods to evaluate how horn-like geometries reduce impact-induced accelerations. A custom drop tower was built to test dynamic …

Direct Numerical Simulation Of Pulsating Flow In Curved Pipes: Insights Into Aortic Dissection In Humans, Gokul Anugrah Gopakumar

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation investigates the hemodynamics of pulsating blood flow in curved vessels through direct numerical simulations (DNS), with the overarching aim of uncovering fluid dynamic mechanisms linked to the onset and progression of aortic dissection in humans. The work is structured in two parts: (i) fundamental studies in idealized geometries and (ii) preliminary investigations in patient-specific anatomies. In the first part, curved pipe models representing the aortic arch are used to isolate the effects of pulsation frequency, amplitude ratio, and curvature ratio on transitional and turbulent flow dynamics. The simulations reveal that curvature-driven centrifugal forces shift the peak velocity toward …

Integrated Compliant Structure For A Hand Exoskeleton, Tristan R. Koopman

Honors Undergraduate Theses

This thesis presents the design and prototyping of a wearable hand exoskeleton that integrates a flexible structural framework to assist with hand movement while maintaining comfort and anatomical conformity. The goal was to create a device that supports tendon-driven actuation through a compliant structure, combining elements of rigidity and flexibility to match the natural geometry and motion of the human hand. Traditional hand exoskeletons often trade off motion for structure or vice versa. This project aims to bridge that gap with a hybrid compliant design that balances flexibility and support. The design process followed an iterative approach involving rapid prototyping …

Effects Of Changes In Strouhal And Reynolds Numbers On Beetle Wing Aerodynamics, Keith L. Thiha

Honors Undergraduate Theses

Insect flight has long been a subject of interest across the scientific community, largely due to the exceptional aerodynamic performance insects demonstrate relative to their size. Insects tend to have very high aerodynamic performance characteristics like thrust and lift generation compared to their size. This has many potential applications in improving aircraft performance, however the flow phenomena concerning insect wing aerodynamics is still an area of ongoing research. This study aims to investigate how variations in key nondimensional flow parameters—specifically the Reynolds number and Strouhal number—affect the aerodynamic performance of beetle wings. Strouhal numbers ranging from 0.2 to 0.6 were …

Biomechanical Effects Of Worn-Out Shoe Outsoles And Insoles On The Human Foot, Yuka M. Iwashita, James A. Engebretson, Shreeshan Jena

College of Engineering Summer Undergraduate Research Program

The combination of outsole, midsole and insole layers of new shoes provide proper cushioning to the foot during the daily activities of life. Subsequently, the wear-based degeneration or damage to one or more of these sole layers can reduce the cushioning effect to the plantar surface of the foot. This reduction of cushioning effect can impact the distribution of stress concentration regions along the foot plantar surfaces and lead to foot pathologies. The present proposed research intends to study these effects of shoe-wear on the plantar surface of the human foot, using FEA (ABAQUS) and experimental methods. Commonly, the worn-out …

Patient-Specific Musculoskeletal Modeling Of Total Shoulder Arthroplasty, Brendan M. Curran

Electronic Theses and Dissertations

Total shoulder arthroplasty (TSA) is often considered a surgery of last resort for patients with debilitating pathologies of the glenohumeral joint such as osteoarthritis, humeral head fracture, and advancing rotator cuff tears. TSA replaces the articulation between the humeral head and the glenoid fossa, with the goals of relieving pain and restoring function. Two types of total shoulder implants are available: Anatomic Total Shoulder Arthroplasty (aTSA) and Reverse Total Shoulder Arthroplasty (rTSA). TSA survivorship is lower than that of the survivorship seen in total knee and hip replacements [1]. Shoulder muscle moment arms and lines of action have been measured …

Simultaneous Evaluation Of Tibiofemoral And Patellofemoral Mechanics In Total Knee Arthroplasty: A Combined Experimental And Computational Approach, Yashar A. Behnam, Ahilan Anantha Krishnan, Hayden Wilson, Chadd W. Clary

Center for Orthopaedic Biomechanics: Faculty Scholarship

Contemporary total knee arthroplasty (TKA) has not fully restored natural patellofemoral (P-F) mechanics across the patient population. Previous experimental simulations have been limited in their ability to create dynamic, unconstrained, muscle-driven P-F articulation while simultaneously controlling tibiofemoral (T-F) contact mechanics. The purpose of this study was to develop a novel experimental simulation and validate a corresponding finite element model to evaluate T-F and P-F mechanics. A commercially available wear simulator was retrofitted with custom fixturing to evaluate whole-knee TKA mechanics with varying patella heights during a simulated deep knee bend. A corresponding dynamic finite element model was developed to validate …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Computational Modeling Using A Novel Continuum Approach Coupled With Pathway-Informed Neural Networks To Optimize Dynein-Mediated Centrosome Positioning In Polarized Cells, Arkaprovo Ghosal, Padmanabhan Seshaiyar Dr., Adriana Dawes Dr., General Genomics Inc.

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Kinematic Analysis Of Gait And Deep Knee Flexion For Pre- And Post-Operative Total Knee Arthroplasty, Samantha Collins

Electronic Theses and Dissertations

Osteoarthritis (OA) is a form of arthritis that develops in the joint due to overuse and aging causing pain, discomfort, and disability. Total Knee Arthroplasty (TKA) is a surgical procedure performed when OA symptoms are severe with an estimated 600,000 patients in the United States currently receiving TKA. Studies have reported dissatisfaction of the knee for 14-39% of patients. This study collected knee kinematics before and after surgery using stereo radiography for precise measurement of gait and deep knee flexion activities. Results showed healthy knee kinematics were not restored and no significant changes could be seen from OA kinematics in …

Computational Methodology For Generating Patient-Specific Soft Tissue Representations, Ahilan Anantha Krishnan

Electronic Theses and Dissertations

This dissertation focused on modeling specimen-specific soft tissue structures in the context of joint replacement surgery. The research addressed four key aspects. The first study involved developing a workflow for creating finite element models of the hip capsule to replicate its torque-rotational response. Experimental data from ten cadaveric hips were used to calibrate the models, resulting in improved accuracy and relevance for surgical planning and implant design. The second study tackled the challenge of expediting the calibration of mechanical properties of the hip capsule to match patient-specific laxities. A statistical shape function model was proposed to generate patient-specific finite element …

Digital Twins Of The Living Knee: From Measurements To Model, Thor Erik Andreassen

Electronic Theses and Dissertations

Modern medicine has dramatically improved the lives of many. In orthopaedics, robotic surgery has given clinicians superior accuracy when performing interventions over conventional methods. Nevertheless, while these and many other methods are available to ensure treatments are performed successfully, far fewer methods exist to predict the proper treatment option for a given person. Clinicians are forced to categorize individuals, choosing the best treatment on “average.” However, many individuals differ significantly from the “average” person, for which many of these treatments are designed. Going forward, a method of testing, evaluating, and predicting different treatment options' short- and long-term effects on an …

Finite Element Modeling Of Patient-Specific Total Shoulder Arthroplasty, Ignacio Rivero Crespo

Electronic Theses and Dissertations

Total Shoulder Arthroplasty (TSA) is a surgical procedure designed to improve joint functionality by replacing the articulation between the humeral head and the glenoid fossa. Anatomic Total Shoulder Arthroplasty (aTSA) and Reverse Total Shoulder Arthroplasty (rTSA) are two types of replacement surgery to relieve pain and restore function of the shoulder. The overall goal of this study was to evaluate the effects of variation of certain patient and implant alignment parameters that may influence long-term outcomes of these surgical procedures, including kinematics, joint loads and contact mechanics. Computational models of six TSA subjects, three aTSA and three rTSA, were created …

Bespoke Bicycle Enclosure, Thomas Link, Kyle Mcafee, Marc Monier, Hunter Walden

Mechanical Engineering

Brian Higgins is an American veteran with retinitis pigmentosa who relies on cycling for transportation. The motivation for this project is to design and manufacture a refined prototype bicycle attachment to support him while biking in the rain and cold. The attachment will serve to enclose him for optimal protection from inclement weather, while maintaining sufficient mobility for daily cycling. Mr. Higgins’ bicycle is equipped with an attached sensor system which assists his visual impairment by using an ultrasonic sensor. Therefore, the attachment cannot adversely affect the function of the sensor system. The project timeline is set at approximately 7 …

Patient Movement Monitoring Based On Imu And Deep Learning, Mohsen Sharifi Renani

Electronic Theses and Dissertations

Osteoarthritis (OA) is the leading cause of disability among the aging population in the United States and is frequently treated by replacing deteriorated joints with metal and plastic components. Developing better quantitative measures of movement quality to track patients longitudinally in their own homes would enable personalized treatment plans and hasten the advancement of promising new interventions. Wearable sensors and machine learning used to quantify patient movement could revolutionize the diagnosis and treatment of movement disorders. The purpose of this dissertation was to overcome technical challenges associated with the use of wearable sensors, specifically Inertial Measurement Units (IMUs), as a …

A Proof Of Concept For Detection Of Palato-Lingual Contact Without Intraoral Electrodes In A Human Participant, Amitava Biswas

Master's Theses

The author of this thesis conceived and investigated an unexpected electrical signal that may not be noticed during regular electroglottography (EGG) when electrodes are conventionally placed on the anterior surface of the throat. It appears that there is a measurable electrical signal from the EGG equipment when electrodes are placed over the frontal cheek (belly of zygomatic muscle), and the tongue is elevated to contact the hard palate, or the tongue is lowered to break the contact. Therefore, this phenomenon is designated as unconventional electroglottography (UEGG, Dr. Steven Cloud, private communication, July 17, 2022).

Two distinctive patterns of waveforms were …

Blood Flow Regulates Atherosclerosis Progression And Regression, Morgan A. Schake

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Atherosclerosis is the most prevalent pathology of cardiovascular disease with no known cure. Despite the many systemic risk factors for atherosclerosis, plaques do not form randomly in the vasculature. Instead, they form around bifurcations and the inner curvature of highly curving arterial segments that contain so-called disturbed blood flow that is low in magnitude and multidirectional over the cardiac cycle. Conversely, straight, non-bifurcated arterial segments that contain moderate-to-high and unidirectional (i.e., normal) blood flow are protected from plaque development. Thus, blood flow is a key regulator of atherosclerosis that may be able to be leveraged to develop new therapeutics. Towards …

Concurrent Validity Study Of 3d Motion Measurement Systems: Vicon Vs. Xsens, Pias Das

Masters Theses

As the Inertial Measurement System (IMS) being a potential alternative to the Optoelectronic Measurement System (OMS) in terms of capturing comprehensive and objective musculoskeletal data, they need to be verified concurrently with the OMS before we start using the IMS in clinical motion analysis. To achieve this, a concurrent validity experiment of the Xsens system (IMS) in comparison to the Vicon system (OMS) was conducted for both upper and lower extremity movements during walk, squat, and lateral lunge (left and right) to quantify the degree of similarity of kinematic data between the two systems by direct comparison, root mean square …

Computational Simulations Of The Effects Of Gravity On Lymphatic Transport, Huabing Li, Huajian Wei, Timothy P. Padera, James W. Baish, Lance L. Munn

Faculty Journal Articles

Physical forces, including mechanical stretch, fluid pressure, and shear forces alter lymphatic vessel contractions and lymph flow. Gravitational forces can affect these forces, resulting in altered lymphatic transport, but the mechanisms involved have not been studied in detail. Here, we combine a lattice Boltzmann-based fluid dynamics computational model with known lymphatic mechanobiological mechanisms to investigate the movement of fluid through a lymphatic vessel under the effects of gravity that may either oppose or assist flow. Regularly spaced, mechanical bi-leaflet valves in the vessel enforce net positive flow as the vessel walls contract autonomously in response to calcium and nitric oxide …

Development Of A Reverse Engineered, Parameterized, And Structurally Validated Computational Model To Identify Design Parameters That Influence American Football Faceguard Performance, William Ferriell

All Dissertations

Traumatic brain injury (TBI) continues to have the greatest incidence among athletes participating in American football. The headgear design research community has focused on developing accurate computational and experimental analysis techniques to better assess the ability of headgear technology to attenuate impacts and protect athletes from TBI. Despite efforts to innovate the headgear system, minimal progress has been made to innovate the faceguard. Although the faceguard is not the primary component of the headgear system that contributes to impact attenuation, faceguard performance metrics, such as weight, structural stiffness, and visual field occlusions, have been linked to athlete safety. To improve …