Biomechanical Engineering Commons^™

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

Automation And Habitat Development For A Space Based Marine Life Environment, Logan Trimmer, Alexander Hang

Harrisburg University Other Works

This project was a cross-collaboration between the Environmental Sciences and Advanced Manufacturing and Robotics programs for the company Monolith Space.

The goal of this project was to design an autonomous system to be able to track qualities of water in an aquaculture system designed to be sent to space.

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Gamified Gait Rehabilitation Via Real-Time Biofeedback And Adaptive Hip-Exoskeleton Control, Mariya Huzaifa Tohfafarosh

Theses

Gait impairments arise from systemic diseases, age-related degeneration, musculoskeletal dysfunctions, or neurological conditions. While traditional rehabilitation can be effective, they often face challenges such as high costs, inaccessibility, and low patient engagement. To address these challenges, my work introduces a virtual reality-based rehabilitation (VRBR) system, integrating real-time motion and electromyographic (EMG) muscle activation feedback with a gamified virtual environment for enhanced adaptability and engagement. The system includes a custom-designed hip-exoskeleton that provides adaptive spring-like assistance or resistance, supporting both mobility-impaired users and strength training. Assistance levels can be tuned to match the user's progress. Additionally, a custom pressure insole was …

Emg-Based Intraoperative Neuromonitoring Using Advanced Machine Learning Approaches, Abdalla Nabil Elsharkawy, Nourhan Zayed

Mechanical Engineering

Intraoperative neuromonitoring (IONM) plays a critical role in minimizing nerve damage during surgeries by providing real-time feedback on neural integrity. This study evaluated models associated with deep learning and machine learning models for electromyography classification of signal during intraoperative neuromonitoring (IONM). The CNNLSTM model achieved the highest accuracy (85.2%), outperforming traditional models like KNN (53%), RF (62%), and CNN (76%). This demonstrates the degree to which the CNN-LSTM model can gain insight into temporal and spatial dependencies throughout the EMG signals, which makes it optimal for real-time classification in IONM applications. This implies that deep learning techniques can improve surgical …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

Cochlear Electrode Insertion Training Model, Sarah Powell, Kaelyn E. Kraley, Nathan J. Smith

Williams Honors College, Honors Research Projects

Cochlear implant surgery is a delicate procedure performed by Otolaryngologists (ENTs) to implant an electronic device into the inner ear to provide a sense of sound for people who are profoundly deaf or hard of hearing. The current practices of training involve cadavers and 3D-printed models. Cadavers are commonly used but are expensive, single-use, and do not provide visual and haptic feedback, which are essential for medical students. 3D printed models are less commonly used and are hard to fabricate and not as realistic. If medical students are not properly trained for this delicate procedure, then risks are significantly increased …

Mechanically Cost-Effective Approach For Bipedal Walking In Robots Using Instantaneous Collision Angle, Smit R. Patel

UNLV Theses, Dissertations, Professional Papers, and Capstones

Humans, as bipedal locomotors, are effective at reducing the mechanical cost of transport (CoTmech) by adopting movement strategies and gaits that minimize energy expenditure for a given distance. By using different gaits at different speeds, leveraging their long spring-like tendons and muscle elasticity which store and release energy during movement, humans reduce the mechanical effort required for locomotion. Current locomotion solutions offered in bipedal robots, based on legacy walking and running gait models, are not great at energy efficiency unless walking at very low speeds. Additionally, the control system of robots, designed to ensure stability and adaptability, requires substantial resources, …

Alteration Of Peripheral Cytokines In Alzheimer’S Disease, Zhengshi Yang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Alzheimer’s disease (AD) is a progressive neurodegenerative disease with the clinical symptoms of gradual cognitive decline and memory loss. Biologically, abnormal accumulation of Aβ (Aβ) plaque and tau tangles in the brain are the core pathological hallmarks in AD. Although inflammatory response is not specific to AD, emerging evidence suggests that the disrupted innate immune system within the central nervous system, particularly microglial activation, might act as the bridge linking Aβ aggregation to pathological phosphorylation and aggregation of tau. The inflammatory response was suggested to initially have a neuroprotective role of attempting to clear Aβ plaques, and then become neurotoxic …

Delineating Genetic Influences On Neurodegenerative Disorders And Infectious Diseases Through Advanced Computational Methods, Xiaowei Zhuang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Genetics plays a critical role in understanding the molecular mechanisms underlying neurodegenerative disorders and pathogen evolution in infectious diseases. For example, identifying genetic variants associated with a disease phenotype uncovers functional pathways that could lead to potential drug targets and therapeutic interventions. In addition, tracking the genetic evolution of pathogens enables early detection and warning of infectious disease outbreaks. In both applications, given the large amount of genetic data, advanced computational methods, including longitudinal and multivariate models, could significantly boost the statistical power and capture interrelationships among traits, environmental factors and genetic influences. This dissertation focuses on four applications of …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Assessing The Impact Of Femur Morphological Variations On Pediatric Hip Joint Biomechanics Using Statistical Shape Modeling, Tamara Chambers

Doctoral Dissertations and Master's Theses

This dissertation aimed to (1) quantify morphological variations in the pediatric hip joint and (2) evaluate the sensitivity of an infant musculoskeletal model (MSM) to these variations, considering hip joint center estimation errors. A shape statistical model (SSM) of decedent infant femurs from the Ortolani collection was created using ShapeWorks, capturing key morphological features, such as variations in the femoral neck-shaft and anteversion angles. Seven synthetic femurs were generated from the SSM to create SSM-informed MSMs, which were systematically evaluated through kinematics and kinetics analyses in OpenSim. Incorporating the SSM led to slight changes in the pediatric MSMs’ kinematics but …

A Kinematic Analysis Of The Shoulder During The Volleyball Attack Using Euler And Helical Axis Methods, Victoria Jolliff

Biomedical Engineering Theses & Dissertations

The shoulder is a complex joint with a wide range of motion, including flexion, extension, abduction, adduction, and internal and external rotation. In volleyball, repetitive overhand movements can cause shoulder overuse injuries. The primary offensive move, the attack, involves the approach, arm cocking, arm acceleration, and follow-through phases. Motion capture analysis and techniques like calculating Euler angles and rotation about a mean helical axis can evaluate shoulder movements. This study aimed to calculate shoulder movements during each phase of the volleyball attack using the Euler angle YXY sequence and the helical axis method. Different attack types, such as cross-court and …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Characterizing The Molecular And Cellular Changes Of Senescent Cells Induced By Diverse Stressors In 2d And 3d Microenvironments, Apoorva Chauhan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Aging is a risk factor for myriad diseases and is often associated with the accumulation of senescent cells. Cellular senescence, a process of irreversible cell cycle arrest, is associated with various changes in cellular morphology and function. While senescence will occur naturally in a time-dependent manner, it can be prematurely induced by various extrinsic and intrinsic factors. Most senescence studies model cell behavior in two-dimensional (2D) microenvironments; however, these models are not physiologically relevant. In this study, the effects of naturally occurring reactive oxygen species (ROS) hydrogen peroxide (H2O2) and commonly used chemotherapy drugs, doxorubicin and palbociclib, on cellular senescence …

Hierarchical Based Classifcation Method Based On Fusion Ofgaussian Map Descriptors Foralzheimer Diagnosis Using T1‑Weighted Magnetic Resonance Imaging, Nourhan Zayed, Shereen E. Morsy, Inas A. Yassine

Mechanical Engineering

Alzheimer’s disease (AD) is considered one of the most spouting elderly diseases. In 2015, AD is reported the US’s sixth cause of death. Substantially, non-invasive imaging is widely employed to provide biomarkers supporting AD screening, diagnosis, and progression. In this study, Gaussian descriptors-based features are proposed to be efcient new biomarkers using Magnetic Resonance Imaging (MRI) T1-weighted images to diferentiate between Alzheimer’s disease (AD), Mild Cognitive Impairment (MCI), and Normal controls (NC). Several Gaussian map-based features are extracted such as Gaussian shape operator, Gaussian curvature, and mean curvature. The aforementioned features are then introduced to the Support Vector Machine (SVM). …

Novel Approach For Non-Invasive Prediction Of Body Shape And Habitus, Emma Young

Electronic Theses and Dissertations

While marker-based motion capture remains the gold standard in measuring human movement, accuracy is influenced by soft-tissue artifacts, particularly for subjects with high body mass index (BMI) where markers are not placed close to the underlying bone. Obesity influences joint loads and motion patterns, and BMI may not be sufficient to capture the distribution of a subject’s weight or to differentiate differences between subjects. Subjects in need of a joint replacement are more likely to have mobility issues or pain, which prevents exercise. Obesity also increases the likelihood of needing a total joint replacement. Accurate movement data for subjects with …

A Review Of Piezoelectric Footwear Energy Harvesters: Principles, Methods, And Applications, Bingqi Zhao, Feng Qian, Alexander Hatfield, Lei Zuo, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

Over the last couple of decades, numerous piezoelectric footwear energy harvesters (PFEHs) have been reported in the literature. This paper reviews the principles, methods, and applications of PFEH technologies. First, the popular piezoelectric materials used and their properties for PEEHs are summarized. Then, the force interaction with the ground and dynamic energy distribution on the footprint as well as accelerations are analyzed and summarized to provide the baseline, constraints, potential, and limitations for PFEH design. Furthermore, the energy flow from human walking to the usable energy by the PFEHs and the methods to improve the energy conversion efficiency are presented. …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Master's Theses

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Predicting The Progression Of Diabetes Mellitus Using Dynamic Plantar Pressure Parameters, Mathew Sunil Varre

UNLV Theses, Dissertations, Professional Papers, and Capstones

Introduction: Diabetic peripheral neuropathy is one of the common complications of type-2 diabetes mellitus (DM). Changes in the intrinsic plantar tissue coupled with repetitive mechanical loads and loss of sensation may lead to foot related complications (skin break down, ulcerations, and amputations) in persons with neuropathy if left untreated. The purpose of this dissertation was to stratify individuals with pre-diabetes, diabetes with and without neuropathy using dynamic plantar pressure parameters during walking, using machine learning algorithms.Methods: Plantar pressure data was collected from one hundred participants during walking with pressure measuring insoles fixed between the feet and thin socks. Simultaneously high-definition …

Radiomic Features To Predict Overall Survival Time For Patients With Glioblastoma Brain Tumors Based On Machine Learning And Deep Learning Methods, Lina Chato

UNLV Theses, Dissertations, Professional Papers, and Capstones

Machine Learning (ML) methods including Deep Learning (DL) Methods have been employed in the medical field to improve diagnosis process and patient’s prognosis outcomes. Glioblastoma multiforme is an extremely aggressive Glioma brain tumor that has a poor survival rate. Understanding the behavior of the Glioblastoma brain tumor is still uncertain and some factors are still unrecognized. In fact, the tumor behavior is important to decide a proper treatment plan and to improve a patient’s health. The aim of this dissertation is to develop a Computer-Aided-Diagnosis system (CADiag) based on ML/DL methods to automatically estimate the Overall Survival Time (OST) for …

Modeling Human Control Behavior In Command-Following Tasks, Sajad Koushkbaghi

Theses and Dissertations--Mechanical and Aerospace Engineering

Humans interact with a variety of complex dynamic systems on a daily basis. However, they are often the lesser understood component of human-in-the-loop (HITL) systems. In this dissertation, we present the results of two HITL experiments to investigate the control strategies that humans use when performing command-following tasks. The first experiment is designed to investigate the control strategies that humans use to interact with nonlinear dynamic systems. Two groups of human subjects interact with a dynamic system and perform a command-following task. One group interacts with a linear time-invariant (LTI) dynamic system and the other group interacts with a Wiener …

Creating Reel Designs: Reflecting On Arthrogryposis Multiplex Congenita In The Community, Iris Layadi

Purdue Journal of Service-Learning and International Engagement

Because of its extreme rarity, the genetic disease arthrogryposis multiplex congenita (AMC) and the needs of individuals with the diagnosis are often overlooked. AMC refers to the development of nonprogressive contractures in disparate areas of the body and is characterized by decreased flexibility in joints, muscle atrophy, and developmental delays. Colton Darst, a seven-year-old boy from Indianapolis, Indiana, was born with the disorder, and since then, he has undergone numerous surgical interventions and continues to receive orthopedic therapy to reduce his physical limitations. His parents, Michael and Amber Darst, have hopes for him to regain his limbic motion and are …

Healthy Aging In Place: An Integrated Smart Home Using Alexa-Compatible Technology, Tyler Kryst

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to address current healthcare concerns among the aging population. Around the globe, the average life expectancy is projected to continue increasing resulting in a higher prevalence of age-related disease. With the ever-increasing capabilities of modern technology, it is necessary to apply this technology to increase the health and safety of older adults. This work had three objectives. The first objective was the establishment of an integrated smart home aimed at creating a healthy aging-in-place environment through the use of Alexa. The second objective was the development and integration of a completely custom health device …

Patient-Specific Finite Element Analysis For Mandibular Fracture Fixation, Ethan Snyder

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis proposes an approach for Finite Element Analysis (FEA) of mandibular fracture fixation. Using a Computerized Tomography (CT) scan of mandible obtained from a specific person, the material characteristics, density and modulus of elasticity, were determined from a set of discrete points within the mandible that are 1mm spaced based on the Hounsfield Units of these points. The mandible geometry was sectioned to simulate a fracture. Muscle and mastication forces were added to replicate post-surgery loading. Using a standard linear miniplate, this material model was compared with two commonly used mandibular cortical shell bone models: isotropic and orthotropic. A …

Husky Hand: A Low-Cost Electro-Mechanical Prosthetic Arm For The Underprivileged, Adam Robert

Thinking Matters Symposium

A continuation of a low-cost prosthetic upper limb prototype design which was investigated in EGN 301. The prosthetic is specifically designed for the needs and requirements of under privileged individuals in the Dominican Republic with upper limb amputations. The project focuses on the creation of an open-source computer aided prosthetic hand/arm model. The design allows consumer-grade fused filament fabrication (FFF) 3-D printers to be used. The improved design allows for the integration of the PQ-12 linear actuator for grasp and finger control. This simplifies the assembly, while, also reducing the size and mass of the whole unit. Producing a low-cost …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …