Biomechanical Engineering Commons^™

Design And Fabrication Of 3d Bioprinted Scaffold: Experimental And Machine Learning Methods, Mohan K. Dey

LSU Doctoral Dissertations

The development of reliable hydrogel-based scaffolds for extrusion bioprinting remains limited by the poor structural fidelity of low-viscosity bioinks and the lack of robust, high-throughput quality evaluation methods. This dissertation can resolve such challenges by developing the combination of optimized hydrogel formulations, cryogenic-assisted bioprinting, and artificial intelligence (AI)-based scaffold evaluation to the use of tissue engineering and preclinical cancer modelling applications. To assess the rheological behavior, printability, mechanical properties, and biocompatibility of the alginate – gelatin (Alg–Gel) system, a novel system of hydrogel was developed and characterized using Alg–Gel hydrogel system. The 7% alginate, 8% gelatin mixture was found to …

Smart Sleeve, Evan Abalos, Bright Jung, Owen Bowling, Wyatt Eberhart

Mechanical Engineering

Quantifying human arm muscle activity is essential for understanding human movements and helping individuals who suffer from motor or neurological impairments such as stroke or traumatic brain injuries. Today, these individuals, as well as clinicians, researchers, and athletes, face many challenges when using the traditional surface electromyography (sEMG) systems to monitor muscle activities, including complex setup, restricted mobility, discomfort, inconsistent placement of electrodes, and lack of accuracy. Therefore, a comfortable EMG sleeve device that accurately measures arm movement without interfering with daily tasks is needed, which the team will be designing, manufacturing, and testing as their senior project. In addition, …

Design And Evaluation Of An Assistive Powered Hand Orthosis For Grasp Activities For People Post-Stroke, Sydney Alexander

Master's Theses

After suffering a stroke, many survivors experience physical disability that affects their ability to complete daily tasks using their hands. Physical therapy is often pre scribed to people post-stroke, but is not fully effective at restoring hand function. The goal of this project was to design and fabricate an assistive device for people post-stroke to help with grasp and release. The device was designed to address com mon shortcomings of existing similar devices. State of the art devices in this domain were investigated to determine a set of design improvements. A novel motor-actuated hand orthosis was designed to decrease weight, …

Cathy’S Catcher, Marlee Scott, Regen Worsley, Alessandra Valenzano, Aviv Ben Zeev

Mechanical Engineering

Deep-sea fishing presents significant challenges for individuals with upper-limb differences, particularly when using prosthetic devices that are not designed for recreational fishing activities. This project developed a custom prosthetic fishing rod attachment for a user who had lost her forearm and desired a safe, comfortable, and independent method of fishing. Through interviews with the sponsor and an iterative design process, a lightweight aluminum attachment was created to interface directly with the user's existing prosthetic quick-connect system.

The design process included concept generation, CAD modeling, rapid prototyping with 3D-printed models, manufacturing, and user-centered refinement. The final design consists of a welded …

Multiscale Architecture Governs Stability In Suction-Actuated Variable Stiffness Catheters, Sheridan Lee

McKelvey School of Engineering Graduate Student Theses & Dissertations

Endovascular procedures require devices with widely varying mechanical properties: flexibility for navigating tortuous vessels and rigidity for stable therapeutic delivery. Suction-actuated variable stiffness sheaths address this challenge by incorporating axial wire string arrays that mechanically couple under suction to increase flexural rigidity. However, prototype devices achieve stiffening ratios below theoretical predictions, suggesting that interlayer mechanics and string positioning play a critical role. This study investigates whether interweaving polytetrafluoroethylene (PTFE) tape within the string array enhances flexural rigidity modulation and curvature stability. Prototype devices with varying wrap configurations were fabricated and evaluated using flexural testing, curvature stability testing, and mathematical modeling. …

An Experimental Study Of The Morphology Of Dna-Carbon Nanotube Hybrid Structures In Direct Dna Sequencing, Avery P. Davis

Biomedical Engineering Undergraduate Honors Theses

Hybrid structures formed between single-stranded DNA (ssDNA) and single-walled carbon nanotubes (SWCNT) have emerged as promising components in future direct DNA sequencing technologies due to their unique morphological and electronic properties. The nanoscale configuration of these hybrids, including the DNA wrapping angle, pitch, and contour behavior, directly influences their potential for stable electronic readout. This thesis presents an experimental study of DNA-SWCNT hybrid morphology using a fixed, reproducible wrapping protocol designed to minimize environmental variability and isolate the influence of DNA nucleotide sequence on hybrid structure. As described in prior work, this protocol produces well-dispersed hybrids suitable for high-resolution imaging. …

Effects Of A Passive Assistive Hamstring Device On Overground Running Kinematics And Hamstring Activation., Quinn Castner

All Theses

Hamstring strain injuries are among the most common and recurring injuries in sports, occurring most often during the terminal swing phase of gait. Despite progress in rehabilitation, the incidence of injury has only increased, suggesting a need for a novel intervention. We designed a passive, assistive, wearable device with two specific criteria in mind: to offload the hamstrings during running, and do so without hindering normal kinematic patterns. The device consists of an adjustable elastic band anchored proximally at the waist and distally just above the ankle joint center. It stretches and shortens with the hamstrings, providing passive hip extension …

Exercise-Induced Muscle Damage As A Model For Exploring The Effects Of Pain On Gait, Sydney Savage

All Theses

Persistent gait asymmetry following anterior cruciate ligament reconstruction (ACLR) is a recognized contributor to post-traumatic knee osteoarthritis, yet the independent role of pain in driving altered movement patterns remains poorly understood due to confounding factors inherent to clinical populations. This study used exercise-induced muscle damage (EIMD) as a controlled experimental model to isolate the effects of musculoskeletal pain on gait, independent of kinesiophobia, structural damage, and proprioceptive disruption. Eighteen healthy adults underwent unilateral eccentric calf-raise protocols to induce delayed onset muscle soreness (DOMS), with gait assessed at baseline, 48 hours, and 168 hours post-exercise using bilateral inertial measurement units. Outcomes …

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

Experimental And Computational Investigation Of The Effects Of Neck Musculature During Head Impacts In American Football, Anthony P. Marino

All Dissertations

Anthropometric test devices (ATDs) are human surrogate models used to represent the human body response in the context of compliance and safety testing. These devices are used in multiple industries, including automotive and aerospace, and have recently been incorporated into impact testing for the evaluation of helmet performance in American football. The Hybrid III 50^th percentile male ATD head and neck assembly is the most commonly used surrogate for these tests, although it was developed for automotive frontal crash scenarios that induce an inertial force on the body, leading to head and neck motion primarily in the sagittal plane. …

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Wearable Sensor System Used To Measure Linear And Angular Acceleration Of The Head Of American Football Players, David A. Emerson

LSU Master's Theses

American football players are repeatedly subject to high-velocity impacts; collisions can exceed 100 g in the NFL [1]. Rotational accelerations of the head caused by high-velocity collisions have been proven to be extremely damaging to the highly organized brain fibers at the brain-skull interface [2]. The sensor system (SS) measures the nonplanar acceleration at four locations on a chin strap using ADXL314 accelerometers and utilizes rigid-body kinematics to estimate the head rotational state from the measured acceleration of the SS [3]. The SS was validated through progressive testing, including steady-state, linear impact, and rotational impact testing. The ADLX314 sensor exhibited …

Mechanical Characterization And Modeling Of Rat Myocardia Under The Influence Of Epirubicin, Abdallah Mahmoud Alkhaiyat

Theses and Dissertations

Cancer remains a predominant health challenge that is responsible for a significant portion of global morbidity and mortality. Epirubicin (EPI), a chemotherapeutic anti-cancer drug, has shown remarkable efficacy in combating various malignancies. However, it is known to have undesirable side effects on the heart, collectively referred to as cardiotoxicity. This research investigates the adverse effects of chemotherapy on cardiac contractility through an in vitro examination of the mechanics of healthy and infarcted animal heart tissues. Electrically stimulated slices of rat ventricular tissue were tested using an isometric force measurement tissue bath. The tissue slices were subjected to uniaxial stretching, allowing …

Combining Haptic Feedback With Electromyography To Study Knee Injury In Stationary Cycling, Christopher Kirby

Honors Theses

Patellofemoral Pain Syndrome (PFPS) is the most prevalent overuse injury in cycling, often linked to altered neuromuscular activation patterns of the quadriceps and hamstrings. While sensory feedback has successfully modified cyclists posture, there is a critical lack of evidence-based interventions targeting the underlying muscle activation imbalances associated with chronic knee pain. This study aimed to develop and validate a novel, real-time biofeedback system that utilizes electromyography (EMG) to trigger vibrotactile cues, aiming to shift muscle onset timing earlier in the pedal stroke to mitigate PFPS-related imbalances. A closed-loop system was engineered by integrating a Delsys EMG system with a SageMotion …

Microgravity-Induced Alterations In Left Atrial Hemodynamics And Thrombogenic Risk: Insights From Healthy And Atrial Fibrillation Models, Grace M. Hoeppner

Dissertations, Master's Theses and Master's Reports

Background: Microgravity exposure alters cardiovascular loading, yet its impact on left atrial flow dynamics and thrombotic risk remains poorly understood. This study investigates how spaceflight-relevant microgravity-induced changes in cardiac outflow affect left atrial hemodynamics in healthy individuals and patients with atrial fibrillation.

Methods: Patient-specific left atrial models were generated for three healthy individuals and three AF patients. Computational fluid dynamics (CFD) simulations were performed using each patient’s baseline mitral outflow waveform and two modified waveforms representing short- and long-duration post-flight cardiac loading changes derived from echocardiographic observations. Hemodynamic metrics included left atrial velocity, time averaged wall shear stress, oscillatory shear …

The Development And Implementation Of A Computational Framework To Simulate Patellofemoral Joint Mechanics, Mahmood Rashedi

Master’s Theses

Anterior knee pain affects approximately 25% of adults and is associated with altered joint mechanics. Patellofemoral joint (PFJ) models vary widely in complexity, with no established gold standard. Musculoskeletal models efficiently estimate joint loading but do not capture tissue-level mechanics, whereas finite element (FE) models provide tissue-level predictions at greater computational cost. This thesis developed a workflow to evaluate relationships between musculoskeletal model-predicted PFJ loads and FE-predicted cartilage mechanics, examined the impact of altered quadriceps activation, and introduced improved computational models.

Marker trajectories and ground reaction forces were collected from four adults (2 male, 2 female) during walking and squatting. …

Expansion Limits Of Meshed Split-Thickness Skin Grafts, Haomin Yu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Split-thickness skin grafts are widely used to treat chronic wounds. Procedure design requires surgeons to predict how much a patch of the patient's own skin expands when it is meshed with rows of slits and stretched over a larger wound area. Accurate prediction of graft expansion remains a challenge, with current models overestimating the actual expansion, leading to suboptimal outcomes. Inspired by the principles of mechanical metamaterials, we developed a model that distinguishes between the kinematic rearrangement of structural elements and their stretching, providing a more accurate prediction of skin graft expansion. Our model was validated against extensive data …

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Recreating Fiber Recruitment With Fiber Recruitment Using Additive Manufacturing, Natalia D. Mciver

Biomedical Engineering ETDs

Injured ligaments are often repaired with tendon grafts which may over or under constrain the joint; there is a need for an artificial graft option with the mechanical properties of a native ligament. Crimped fibers within ligaments allow for recruitment which means the viscoelastic properties of stress relaxation and creep are not inversely related. A feasibility study using ACLs and large-scale crimp models to study viscoelasticity, led to an in-depth analysis of the scapholunate interosseous ligament. Using the Modified Kelvin spring-dashpot model, for describing viscoelasticity with a variable stiffness property (time dependent fiber recruitment), we defined the relationship between creep …

Reproducibility In Modeling Of Knee Joint Mechanics, Maryam Nazem

Electronic Theses and Dissertations

Computational modeling of knee joint biomechanics can provide valuable insights into joint function, injury mechanisms, and patient outcomes, and can support surgical planning and informed clinical decision-making. However, achieving consistent and repeatable results, or reproducibility, is a significant challenge that affects the credibility of these models. This thesis addresses reproducibility through two studies related to the KneeHub Project, which is a multi-institutional collaboration designed to investigate reproducibility in finite-element modeling of the knee.

The first study involved model benchmarking, where predicted results of the calibrated models were compared with the experimental data to evaluate model reproducibility. While all models replicated …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

Influence Of Obesity On Knee Joint Mechanics: A Subject-Specific Musculoskeletal Modeling Approach, Ryan C. Knowles

Electronic Theses and Dissertations

Obesity has been consistently linked to knee osteoarthritis (KOA), a debilitating joint disease. While prior work has shown that obese individuals often walk with altered biomechanics compared to normal-weight (NW) individuals, which may accelerate KOA progression, less is known about how these mechanics affect load distribution between the medial and lateral tibiofemoral (TF) compartments, particularly during higher-demand activities. This study developed subject-specific musculoskeletal models of five obese and five NW individuals, incorporating CT-based bone measurements and individualized joint contact points. Simulations were driven by six degree-of-freedom (6DOF) kinematics obtained from high-speed stereo radiography (HSSR) to predict TF loading and associated …

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Joint Kinematics And Kinetics During Vertical Jump Landings With Progressively Increasing External Loads, Darcie L. Yount

Dissertations

This study examined sagittal and frontal plane kinematics and kinetics during countermovement jump (CMJ) landings performed with either a traditional barbell (BB) or a hexagonal bar (HEX) across increasing submaximal loads in recreationally active males. Generally, hip and knee flexion angles and joint mean angular velocities decreased as loads increased. Hip extension and knee flexion moments increased as load increased up to 20 kg, at which point these values decreased. Performing the CMJ with the HEX exhibited increased frontal plane stability compared with the BB group. Additionally, the BB group exhibited stiffer landing strategies, with decreased sagittal plane joint angles …

The Development And Application Of A Method To Simulate Commotio Cordis Inducing Impacts For The Evaluation Of Football Chest Protective Equipment, Bianca J. Henline

All Theses

As one of the most widely played and watched contact sports in the United States, football presents a significant risk of blunt chest trauma. Thus, effective chest protection is essential to prevent rare but fatal injuries like commotio cordis. Despite this, current test methods for certifying chest protective equipment fail to account for injury metrics relevant to commotio cordis events. Recent literature identifies rib deformation and viscous criterion as critical predictors of commotio cordis, yet these metrics are not adequately addressed in the existing testing standard. Furthermore, this standard exclusively assesses chest gear specific to baseball and lacrosse through projectile …

Experimental Evaluation And Comparison Of Football-Related Head Impacts Among Ovine, Human, And Hybrid Iii Headforms, Madysn D. Cardinal

All Dissertations

Concussions and traumatic brain injury (TBI) remains a significant public health concern, especially in American football, where repeated head impacts pose long-term risks to athlete health. While current helmet testing standards rely heavily on the Hybrid III surrogate headform to evaluate protective performance, these surrogate models lack anatomical accuracy and exclude the presence of a brain component, limiting their ability to capture the true mechanics of concussion. To address this limitation, this research developed and validated a novel inverted impact testing method that allows the impact testing of a Hybrid III headform and a cadaveric specimen. Additionally, this fixture preserves …

Towards Improving Computational Modeling Of The Lumbar Spine - Impact Of Material Properties And Laminotomy On Spinal Biomechanics, Isaac K. Kumi

Mechanical & Aerospace Engineering Theses & Dissertations

Spinal ligaments play a crucial role in maintaining the mechanical stability of the lumbar spine. These dense, collagenous tissues not only resist excessive motion but also distribute loads between spinal components to protect neural structures. Traditionally, the mechanical response of ligaments has been modeled using linear elastic assumptions, which treat the tissue as having a constant stiffness regardless of loading history. While this simplifies analysis, it fails to capture the time-dependent behaviors, such as creep, stress relaxation, and hysteresis, that are characteristic of biological tissues.

Viscoelastic modeling may provide a more physiologically accurate representation by incorporating both elastic and viscous …

Inter-Cellular Forces Modulate Cell-Ecm Traction Forces, Zaria Booth

Mechanical & Aerospace Engineering Theses & Dissertations

Epithelial cells are among the most abundant cell types in the human body, making up sheets of epithelial tissues that cover the linings of organs and body cavities. Cellular adhesion and force transmission across epithelial tissues are crucial in maintaining tissue integrity and ensuring proper tissue regeneration. Defects in cellular force transmission have been found in various diseases, including cancer. Force transmission at cell-cell and cell-ECM junctions drive cell survival and development. It has been previously shown that changes in cell-ECM traction directly modulates forces at cell-cell contacts. In this study, we aim to determine the effects of perturbations in …

Van Accessibility, Ann Larson, Camelia Anne Noureddine, Stephanie Rose Ruzicka, Kayla Joanne Gowey

Mechanical Engineering

The SLO Achievement House provides resources and activities for their clients, including daily trips to different parts of the community, to keep their clients connected to society. These trips require the clients, many of whom struggle with general mobility and strength, to step up to the high entrance of a van or company car. This daily activity poses a challenge both physically and emotionally for the clients. The current solution utilizes commercially available step stools, which lack handrails, overall stability, and adequate step depth. The Achievement House needs a stool or ramp tailored to their client’s needs and their specific …