Biomechanical Engineering Commons^™

Predicting Articular Cartilage Constituent Material Properties Following In Vitro Growth Using A Proteoglycan-Collagen Mixture Model, Michael Stender

Master's Theses

      A polyconvex continuum-level  proteoglycan Cauchy stress function was developed based on the continuum electromechanical Poisson-Boltzmann unit cell model for proteoglycan interactions. The resulting proteoglycan model was combined with a novel collagen fibril model and a ground substance matrix material to create a polyconvex constitutive finite element model of articular cartilage. The true collagen fibril modulus , and the ground substance matrix shear modulus , were varied to obtain the best fit to experimental tension, confined compression, and unconfined compression data for native explants and explants cultured in insulin-like growth factor-1 (IGF-1) and transforming growth factor-β1 (TGF-β1).  Results indicate …

Crop Updates 2011 - Weeds, Grant Thompson, Abul Hashem, Catherine Borger, Peter Newman, Mike Ashworth, Glen Riethmuller, David Minkey, Harmohinder Dhammu, David Nicholson, Michael Walsh, Ray Harrington, Nicholas Woods

Crop Updates

This session covers twelve papers from different authors:

1. Herbicides for selective spot spraying application on winter weeds in chemical fallow, Grant Thompson, Landmark/Crop Circle Consulting, Geraldton

2. Management of emerging weeds within the Western Australian wheatbelt, Abul Hashem and Catherine Borger Department of Agriculture and Food

3. Integrated Weed Management (IWM) – it’s all about early sowing of a big crop, Peter Newman, Department of Agriculture and Food

4. Increased water rates improve the performance of trifluralin in minimum tillage systems, Catherine Borger1, Mike Ashworth2, Glen Riethmuller1, David Minkey2, Abul …

Characterising 3d Soft Tissue Features On Joint Surfaces, Colm O'Kane

Conference Papers

A crucial aspect of orthopaedic implant design is the prediction of surgical outcomes when the shape of a bone is necessarily altered by the addition of the implant. Matching native kinematics as closely as possible is generally considered a core aim of joint replacement surgery. The overall hypothesis behind this research is that soft tissue geometry, including cartilage thickness distribution and ligament attachment sites, influences kinematics in the knee joint. In order to enable investigation of possible links between geometry and kinematics, the ability to characterise the shape variation of the soft tissue relative to the underlying bony geometry must …

Label-Free Biochemical Recognition Using Mems Resonators For Microarray Technology, Babak Tousifar

Electronic Theses and Dissertations

Highly sensitive biosensors capable of detecting and characterizing smallest quantities of cellular and molecular targets are needed in pharmaceutical and medical diagnostics industries. In this work, the importance of biological target recognition specifically proteins through microarray technologies has been discussed and the most successful tools and techniques have been studied. Moreover, a thermally actuated Micro Electro-Mechanical Systems (MEMS) resonator has been demonstrated and fabricated in this work as an accurate, reliable and low cost biotechnology tool. As a proof of concept, amine to epoxide coupling of octadecylamine to functionalized silicon dioxide surface have been shown through resonator frequency monitoring. The …

Low-Cost Prosthetic Leg For The Vida Nueva Prosthesis Clinic, Sarah M. Baker, Justin G. Lekos, Jen Van Donk, Kevin Yamauchi

Mechanical Engineering

The Piernas de Vida team partnered with the Vida Nueva Clinic of Prostheses and Orthoses in Choluteca, Honduras to design, plan, and implement a prosthetic foot that could be manufactured entirely by the technicians at the clinic in order to reduce their costs and ultimately allow them to serve more patients each year. Currently, the clinic uses a prefabricated prosthetic lower limb provided by the International Committee of the Red Cross (ICRC) which can be adapted to both transDfemoral and transDtibial patients. The team has successfully developed a foot, currently called the Layer Foot, which can be used by the …

Implicit Methods For Efficient Musculoskeletal Simulation And Optimal Control, Antonie J. Van Den Bogert, Dimitra Blana, Dieter Heinrich

Mechanical Engineering Faculty Publications

The ordinary differential equations for musculoskeletal dynamics are often numerically stiff and highly nonlinear. Consequently, simulations require small time steps, and optimal control problems are slow to solve and have poor convergence. In this paper, we present an implicit formulation of musculoskeletal dynamics, which leads to new numerical methods for simulation and optimal control, with the expectation that we can mitigate some of these problems. A first order Rosenbrock method was developed for solving forward dynamic problems using the implicit formulation. It was used to perform real-time dynamic simulation of a complex shoulder arm system with extreme dynamic stiffness. Simulations …

Estimation Of The Centre Of Mass From Motion Capture And Force Plate Recordings: A Study On The Elderly, Sebastien Cotton, Michele Vanoncini, Philippe Fraisse, Nacim Ramdani, Emel Demircan, Andrew P. Murray, Thierry Keller

Mechanical and Aerospace Engineering Faculty Publications

The estimation of the centre of mass position in humans is usually based on biomechanical models developed from anthropometric tables. This method can potentially introduce errors in studies involving elderly people, since the ageing process is typically associated with a modification of the distribution of the body mass. In this paper, an alternative technique is proposed, and evaluated with an experimental study on 9 elderly volunteers. The technique is based on a virtual chain, identified from experimental data and locating the subject's centre of mass. Its configuration defines the location of the centre of mass, and is a function of …

Using Thermally Coupled Reactive Distillation Columns In Biodiesel Production, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Production of ethyl dodecanoate (biodiesel) using lauric acid and methanol with a solid acid catalyst of sulfated zirconia is studied by using two distillation sequences. In the first sequence, the methanol recovery column follows the reactive distillation column. In the second sequence, the reactive distillation and methanol recovery columns are thermally coupled. Thermally coupled distillation sequences may consume less energy by allowing interconnecting vapor and liquid streams between the two columns to elminate reboiler or condenser or both. Here we study the thermally coupled side-stripper reactive distillation and eliminate the condenser of the reactive distillation column. Both the sequences are …

Personal Navigation Via High-Resolution Gait-Corrected Inertial Measurement Units, Özkan Bebek, Michael A. Suster, Srihari Rajgopal, Michael J. Fu, Xuemei Huang, M. Cenk Çavu¸So˘Glu,, Darrin J. Young, Mehran Mehregany, Antonie J. Van Den Bogert, Carlos H. Mastrangelo

Mechanical Engineering Faculty Publications

In this paper, a personal micronavigation system that uses high-resolution gait-corrected inertial measurement units is presented. The goal of this paper is to develop a navigation system that uses secondary inertial variables, such as velocity, to enable long-term precise navigation in the absence of Global Positioning System (GPS) and beacon signals. In this scheme, measured zerovelocity duration from the ground reaction sensors is used to reset the accumulated integration errors from accelerometers and gyroscopes in position calculation. With the described system, an average position error of 4 m is achieved at the end of half-hour walks.

Concurrent Muscoskeletal Dynamics And Finite Element Analysis Predicts Altered Gait Patterns To Reduce Foot Tissue Loading, Jason P. Halloran, Marko Ackermann, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Current computational methods for simulating locomotion have primarily used muscle-driven multibody dynamics, in which neuromuscular control is optimized. Such simulations generally represent joints and soft tissue as simple kinematic or elastic elements for computational efficiency. These assumptions limit application in studies such as ligament injury or osteoarthritis, where local tissue loading must be predicted. Conversely, tissue can be simulated using the finite element method with assumed or measured boundary conditions, but this does not represent the effects of whole body dynamics and neuromuscular control. Coupling the two domains would overcome these limitations and allow prediction of movement strategies guided by …

Longitudinal Sex Differences During Landing In Knee Abduction In Young Athletes, Kevin R. Ford, Robert Shapiro, Gregory D. Meyer, Antonie J. Van Den Bogert, Timothy E. Hewett

Mechanical Engineering Faculty Publications

Purpose—

The objective of this study was to determine if biomechanical and neuromuscular risk factors related to abnormal movement patterns increased in females, but not males, during the adolescent growth spurt.

Methods—

315 subjects participated in two testing sessions approximately one year apart. Male and female subjects were classified based on their maturation status as pubertal or post-pubertal.Three trials of a drop vertical jump (DVJ) were collected. Maximum knee abduction angle and external moments were calculated during the DVJ deceleration phase using a 3D motion analysis system. Changes in knee abduction from the first to second year were compared among …

A Novel Piezoelectric Device With Dual Functions Of Studying Biological Soft Tissues, Avin A. Jamadagni

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents the design of a novel piezoelectric device with dual functions of studying soft biological tissues. The device consists of a central circular plate and a set of flexural beams. The flexural beams are partially covered with piezoelectric film for integrated transduction. It can function as a force sensor for measuring the mechanical behavior of a tissue sample and a load applier for mimicking physiological loads experienced by the tissue sample in vivo, while the mechanical behavior can be visually observed under a microscope simultaneously. By combining the classic theories in solid mechanics and piezoelectricity, the performance of …

Material Modeling And Analysis For The Development Of A Realistic Blast Headform, S. G. M. Hossain

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Blast traumatic brain injury (BTBI) has become an important topic of study because of the increase of such incidents, especially due to the recent growth of improvised explosive devices (IEDs). This thesis discusses a project in which laboratory testing of BTBI was made possible by performing blast loading on experimental models simulating the human head. Three versions of experimental models were prepared – one having a simple geometry and the other two having geometry similar to a human head. For developing the head models, three important parts of the head were considered for material modeling and analysis – the skin, …

Mechanical Testing Device For Viscoelastic Biomaterials, Jeff D. Berg

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Nearly all biologic tissues exhibit viscoelastic behavior. This behavior is characterized by hysteresis in the response of the material to load or strain. This information can be utilized in extrapolation of life expectancy of vascular implant materials including native tissues and synthetic materials. This behavior is exhibited in many engineering materials as well such as the polymers PTFE, polyamide, polyethylene, etc. While procedures have been developed for evaluating the engineering polymers the techniques for biologic tissues are not as mature. There are multiple reasons for this. A major one is a cultural divide between the medical and engineering communities. Biomedical …

Intelligibility Of Electrolarynx Speech Using A Novel Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. Following a laryngectomy, some people speak using an electrolarynx which replaces the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the buzzing monotonic sound emitted, the need for a free hand to operate the device, and difficulty experienced by many laryngectomees in adapting to its use. Despite these shortcomings, it remains the preferred method of speech rehabilitation for a substantial minority of laryngectomees. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal …

Strider, Eric Johnson, Alex Trask, Ricardo Garcia

Mechanical Engineering

No abstract provided.

Medtronic Universal Crimping Machine, Justin Ginochio, Andrew Hanson, Zachary (Zach) Dieterle

Mechanical Engineering

This project is geared towards the redesign and implementation of a crimping tool for use in the manufacturing of catheters produced by Medtronic Inc. Catheters require two steering cables to maneuver the end of the catheter through the body. The steering cables have a sleeve that is crimped onto their end in order to hold the cable in place inside the catheter steering handle. The current crimping tool, designed by Astro Tool Corp, has a few problems associated with its design. Additionally we are trying to get rid of a step in the manufacturing process that involves the adhesive, cyanoacrylate, …

Edwards Lifesciences: Heart Valve Tension Validation, Lucas Fochler, Alex Mark, Shilpan Shah

Mechanical Engineering

No abstract provided.

Optimization And Evaluation Of A Proportional Derivative Controller For Planar Arm Movement, Kathleen M. Jagodnik, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

In most clinical applications of functional electrical stimulation (FES), the timing and amplitude of electrical stimuli have been controlled by open-loop pattern generators. The control of upper extremity reaching movements, however, will require feedback control to achieve the required precision. Here we present three controllers using proportional derivative (PD) feedback to stimulate six arm muscles, using two joint angle sensors. Controllers were first optimized and then evaluated on a computational arm model that includes musculoskeletal dynamics. Feedback gains were optimized by minimizing a weighted sum of position errors and muscle forces. Generalizability of the controllers was evaluated by performing movements …

Optimality Principles For Model-Based Prediction Of Human Gait, Marko Ackermann, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Although humans have a large repertoire of potential movements, gait patterns tend to be stereotypical and appear to be selected according to optimality principles such as minimal energy. When applied to dynamic musculoskeletal models such optimality principles might be used to predict how a patient's gait adapts to mechanical interventions such as prosthetic devices or surgery. In this paper we study the effects of different performance criteria on predicted gait patterns using a 2D musculoskeletal model. The associated optimal control problem for a family of different cost functions was solved utilizing the direct collocation method. It was found that fatigue-like …

Design And Validation Of A General Purpose Robotic Testing System For Musculoskeletal Applications, Lawrence D. Noble, Robb W. Colbrunn, Dong-Gil Lee, Antonie J. Van Den Bogert, Brian L. Davis

Mechanical Engineering Faculty Publications

Orthopaedic research on in vitro forces applied to bones, tendons, and ligaments during joint loading has been difficult to perform because of limitations with existing robotic simulators in applying full-physiological loading to the joint under investigation in real time. The objectives of the current work are as follows: (1) describe the design of a musculoskeletal simulator developed to support in vitro testing of cadaveric joint systems, (2) provide component and system-level validation results, and (3) demonstrate the simulator’s usefulness for specific applications of the foot-ankle complex and knee. The musculoskeletal simulator allows researchers to simulate a variety of loading conditions …

An Investigation Of Humeral Stress Fractures In Racing Thoroughbreds Using A 3d Finite Element Model In Conjunction With A Bone Remodeling Algorithm, Ryan James Moore

Master's Theses

The humerus of a racing horse Thoroughbred is highly susceptible to stress fractures at a characteristic location as a result of cyclic loading. The propensity of a Thoroughbred to exhibit humeral fracture has made equines useful models in the epidemiology of stress fractures. In this study, a racing Thoroughbred humerus was simulated during training using a 3D finite element model in conjunction with a bone remodeling algorithm. Nine muscle forces and two contact forces were applied to the 3-dimensional finite element model, which contains four separate load cases representing fore-stance, mid-stance, aft-stance, and standing. Four different training programs were incorporated …

An Analytical Model For Rotator Cuff Repairs, A. Aurora, Jorge E. Gatica, Antonie J. Van Den Bogert, J. A. Mccarron, Kathleen A. Derwin

Mechanical Engineering Faculty Publications

Background

Currently, natural and synthetic scaffolds are being explored as augmentation devices for rotator cuff repair. When used in this manner, these devices are believed to offer some degree of load sharing; however, no studies have quantified this effect. Furthermore, the manner in which loads on an augmented rotator cuff repair are distributed among the various components of the repair is not known, nor is the relative biomechanical importance of each component. The objectives of this study are to (1) develop quasi-static analytical models of simplified rotator cuff repairs, (2) validate the models, and (3) predict the degree of load …

A Biomechanical Comparison Of Polymethylmethacrylate-Reinforced And Expansive Pedicle Screws In Pedicle-Screw Revisions, Bora Bostan, Irfan Esenkaya, Taner Gunes, Mehmet Erdem, Murat Asci, Mehmet Halidun Kelestemur, Cengiz Sen

Faculty Publications - Mechanical Engineering

Objectives: Different techniques and choices exist for revision of pedicle screws, two of which are pedicle screw combined with cement augmentation and expansive pedicle screw fixation. This biomechanical study was designed to compare the pullout strengths of two different revision techniques. Methods: Fourteen lumbar vertebrae obtained from four calves (mean age 15 months) were divided into two groups equal in number. Monoaxial 6.0-mm pedicle screws were inserted into the right pedicles, and axial pullout testing was performed at a rate of 10 mm/min and failure strengths were recorded. Revision was performed with the same-sized pedicle screws reinforced with polymethyl-methacrylate in …

Gender Dimorphic Acl Strain In Response To Combined Dynamic 3d Knee Joint Loading: Implications For Acl Injury Risk, Kiyonori Mizuno, Jack T. Andrish, Antonie J. Van Den Bogert, Scott G. Mclean

Mechanical Engineering Faculty Publications

While gender-based differences in knee joint anatomies/laxities are well documented, the potential for them to precipitate gender-dimorphic ACL loading and resultant injury risk has not been considered. To this end, we generated gender-specific models of ACL strain as a function of any six degrees of freedom (6DOF) knee joint load state via a combined cadaveric and analytical approach. Continuously varying joint forces and torques were applied to five male and five female cadaveric specimens and recorded along with synchronous knee flexion and ACL strain data. All data (~10,000 samples) were submitted to specimen-specific regression analyses, affording ACL strain predictions as …

An Elaborate Data Set Characterizing The Mechanical Response Of The Foot, Ahmet Erdemir, Pavana A. Sirimamilla, Jason P. Halloran, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Mechanical properties of the foot are responsible for its normal function and play a role in various clinical problems. Specifically, we are interested in quantification of foot mechanical properties to assist the development of computational models for movement analysis and detailed simulations of tissue deformation. Current available data are specific to a foot region and the loading scenarios are limited to a single direction. A data set that incorporates regional response, to quantify individual function of foot components, as well as the overall response, to illustrate their combined operation, does not exist. Furthermore, the combined three-dimensional loading scenarios while measuring …

Comment On "A Stochastic Biomechanical Model For Risk And Risk Factors Of Non-Contact Anterior Cruciate Ligament Injuries", Antonie J. Van Den Bogert, Scott G. Mclean

Mechanical Engineering Faculty Publications

No abstract provided.

Assessing Vaginal Surgical Skills Using Video Motion Analysis, Gouri B. Diwadkar, Antonie J. Van Den Bogert, Matthew D. Barber, J. Eric Jelovsek

Mechanical Engineering Faculty Publications

OBJECTIVE: To demonstrate the feasibility of using video motion analysis to quantitate a key step of vaginal hysterectomy and define measurable differences between novice and experienced surgical trainees during vaginal hysterectomy.

METHODS: Analyses focused on clamping, transecting, and suturing the left uterosacral ligament. Using a cutoff of 25, trainees were grouped as experienced (n=14) and novice (n=9) based on the total number of vaginal hysterectomies performed by each trainee. Contrasting-groups analysis was used to determine cutoff values that separated novices from experts.

RESULTS: Novice trainees took longer (112 seconds compared with 84 seconds) and had greater cumulative translational motion (92 …

Biomechanical Evaluation Of Glenohumeral Joint Stabilizing Muscles During Provocative Tests Designed To Diagnose Superior Labrum Anterior-Posterior Lesions, Vanessa J. C. Wood

Boise State University Theses and Dissertations

Despite considerable advances in the understanding of glenohumeral (GH) biomechanics and glenoid labral pathologies, arthroscopy remains the only definitive means of Superior Labrum Anterior-Posterior (SLAP) lesion diagnosis. Unfortunately, natural GH anatomic variants limit the reliability of radiography. Accurate clinical diagnostic techniques would be advantageous due to the invasiveness, patient risk, and financial cost associated with arthroscopy. Twenty provocative tests designed to elicit labral symptoms as a diagnostic sign have shown promising accuracy by their respective original authors, but later studies generally fail to reproduce those findings. The purpose of this study was to compare the behavior of GH joint stabilizing …

Mechanical Simulation Of Articular Cartilage Based On Experimental Results, Kevin Matthew Stewart

Master's Theses

Recently, a constituent based cartilage growth finite element model (CGFEM) was developed in order to predict articular cartilage (AC) biomechanical properties before and after growth. Previous research has noted limitations in the CGFEM such as model convergence with growth periods greater than 12 days. The main aims of this work were to address these limitations through (1) implementation of an exact material Jacobian matrix definition using the Jaumann-Kirchhoff (J-K) method and (2) quantification of elastic material parameters based upon research findings of the Cal Poly Cartilage Biomechanics Group (CPGBG). The J-K method was successfully implemented into the CGFEM and exceeded …