Semiconductor and Optical Materials Commons^™

Integration Of Thin Film Tpv Cells To Cvd Diamond Heat Spreaders, Emma J. Renteria

Electrical and Computer Engineering ETDs

In this work, techniques to isolate thermophotovoltaic (TPV) devices from the growth substrate and their subsequent integration with Chemical Vapor Deposition (CVD) diamond heat spreaders will be discussed, with the envisioned goal of fabricating thermally managed cells. CVD diamond heat spreaders are a great option for thermal management of TPV cells. The key requirement, however, is the bonding of the TPV cell directly onto the diamond wafer without the presence of thick (>350 μm) growth substrates, which can offer significant thermal resistance.

The first approach is to release GaSb epitaxial layers from GaSb substrates. However, this is challenging due …

Superconductivity At Т≈200 K In Bismuth Cuprates Synthesized Using Solar Energy, J. Chigvinadze, Juana Acrivos, S. Ashimov, D. Gulamova, G. Donadze

Faculty Publications, Chemistry

When investigating low-frequency (0.1 Hz) oscillations of multiphase high-temperature cuprate superconductors (HTCS) Bi1,7Pb0,3Sr2Ca(n-1)CunOy (n=2-30), a wide attenuation peak (ΔT~100 К) with a maximum at Т≈200 К was detected. This peak was particularly pronounced in field cooling (FC) experiments, i.e. after abrupt cooling of the sample in the external magnetic field at the temperature Т<Тс with subsequent slow warming up to room temperature with invariance of the applied field. The attenuation peak height depended on the preliminaryorientation (before cooling) of the samples θ in the measured permanent magnetic field Н. On the one hand, it is well known that, after the FC procedure and subsequent slow warming up, at the temperatures close to the critical temperature Тс, the attenuation peak associated with “melting” of the Abrikosov frozen vortex structure and its disappearance at Т >Тс is detected in monophase samples. At the same time, in most multiphase bismuth HTCS samples, synthesized using solar energy and superfast quenching of the melt, the attenuation peak with the maximum at Т≈200 К was observed.Depending on the conditions of synthesis, the attenuation peak could …

Cu2znsn(S1-Xsex)4 Solar Cell Fabrication And Characterization, Weiwei Sun

Theses and Dissertations

Cu2ZnSn(S1-xSex)4 (CZTSSe) is a kesterite material with similar properties to CuInxGa1-xS2 (CIGS) but less expensive element contained. A significant progress has been made in terms of CZTSSe in solar cell applications. Despite its energy conversion efficiency of 12.6% has been achieved by IBM using solution processes, further research and understanding of the materials is still needed in order to improve the solar cell performance of CZTSSe. In this study, we use a facile chemical route to fabricating CZTSSe thin-film solar cells by spin-coating followed by selenization process. An environmentally friendly non-toxic solution of highly soluble, inexpensive, and commercially available precursors …

Use Of A Novel Infrared Wavelength-Tunable Laser Mueller-Matrix Polarimetric Scatterometer To Measure Nanostructured Optical Materials, Jason C. Vap, Stephen E. Nauyoks, Michael R. Benson, Michael A. Marciniak

Faculty Publications

Nanostructured optical materials, for example, metamaterials, have unique spectral, directional, and polarimetric properties. Samples designed and fabricated for infrared (IR) wavelengths have been characterized using broadband instruments to measure specular polarimetric transmittance or reflectance as in ellipsometry or integrated hemisphere transmittance or reflectance. We have developed a wavelength-tunable IR Mueller-matrix (Mm) polarimetric scatterometer which uses tunable external-cavity quantum-cascade lasers (EC-QCLs) to tune onto and off of the narrowband spectral resonances of nanostructured optical materials and performed full polarimeteric and directional evaluation to more fully characterize their behavior. Using a series of EC-QCLs, the instrument is tunable over 4.37-6.54 μm wavelengths …

Nanowire-Based Light-Emitting Diodes: A New Path Towards High-Speed Visible Light Communication, Mohsen Nami

Physics & Astronomy ETDs

Nano-scale optoelectronic devices have gained significant attention in recent years. Among these devices are semiconductor nanowires, whose dimeters range from 100 to 200 nm. Semiconductor nanowires can be utilized in many different applications including light-emitting diodes and laser diodes. Higher surface to volume ratio makes nanowire-based structures potential candidates for the next generation of photodetectors, sensors, and solar cells. Core-shell light-emitting diodes based on selective-area growth of gallium nitride (GaN) nanowires provide a wide range of advantages. Among these advantages are access to non-polar m-plane sidewalls, higher active region area compared to conventional planar structures, and reduction of threading …

Single-Step, Atmospheric Pressure Chemical Vapor Deposition Of Methylammonium Bismuth Iodide Thin Films, Xiao Chen

McKelvey School of Engineering Graduate Student Theses & Dissertations

Lead halide perovskites (CH₃NH₃PbI₃ and its variants) are promising solar cell absorber materials. Though the reported power conversion efficiencies of lead halide perovskite solar cells (up to 21%) are competitive with commercial silicon solar cells, lead toxicity in these perovskites present a challenge to further scale-up and eventual commercialization. Recently, bismuth (Bi³⁺) based organic halide perovskite has drawn attention as a substitution for lead-free perovskites, since it is a non-toxic 6p-block element, isoelectronic with Pb²⁺. Methylammonium bismuth iodide ((CH₃NH₃)₃Bi₂I₉) is reported …

Atomistic Simulations Of Novel Nanoscale Semiconductor Devices: Resistance Switches And Two-Dimensional Transistors, Joseph P. Anderson, Mahbubul Islam, David Guzman, Alejandro Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

As transistors get smaller, we are achieving record levels of memory density. However, there is a limit to how small transistors can be made before their functionality breaks down. Thus alternatives to traditional transistor technology are needed. The two such technologies we examined are: resistance switching devices, which reversibly grow metal filaments through a dielectric, and two-dimensional transistors, which are capable of breaking through the scalability limit of traditional transistors. In order to design resistance switching devices which create filaments with some level of consistency, the dynamics of the filament formation need to be explored. Herein we model this process …

Improving Methods Of Doping On Black Phosphorus, Yuqin Duan, Adam Charnas, Jingkai Qin, Peide Ye

The Summer Undergraduate Research Fellowship (SURF) Symposium

Black phosphorus (BP) is a 2D semiconducting material with high carrier mobility. It is usually p-type due to oxidation states near its valence band. Although achieved through other growth methods, n-type doping has not yet been accomplished through the modern chemical vapor transport (CVT) growth method. To address this issue, small amounts of tellurium were added to Red Phosphorus to act as a dopant during the CVT growth process in addition to tin(Sn) and tin(IV) iodide, which facilitate growth. The chemicals are heated up to 600°C and precisely cooled in a 21-hour process, during which BP crystals should form. After …

Electrical Characterization Of Irradiated Semiconducting Amorphous Hydrogenated Boron Carbide, George Glen Peterson

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Semiconducting amorphous partially dehydrogenated boron carbide has been explored as a neutron voltaic for operation in radiation harsh environments, such as on deep space satellites/probes. A neutron voltaic device could also be used as a solid state neutron radiation detector to provide immediate alerts for radiation workers/students, as opposed to the passive dosimetry badges utilized today. Understanding how the irradiation environment effects the electrical properties of semiconducting amorphous partially dehydrogenated boron carbide is important to predicting the stability of these devices in operation. p-n heterojunction diodes were formed from the synthesis of semiconducting amorphous partially dehydrogenated boron carbide on silicon …

Electron Paramagnetic Resonance Study Of Neutral Mg Acceptors In Β-Ga2O3 Crystals, Brant E. Kananen, Larry E. Halliburton, Elizabeth M. Scherrer, K. T. Stevens, G. K. Foundos, K. B. Chang, Nancy C. Giles

Faculty Publications

Electron paramagnetic resonance (EPR) is used to directly observe and characterize neutral Mg acceptors (Mg⁰_Ga) in a β-Ga₂O₃ crystal. These acceptors, best considered as small polarons, are produced when the Mg-doped crystal is irradiated at or near 77 K with x rays. During the irradiation, neutral acceptors are formed when holes are trapped at singly ionized Mg acceptors (Mg−Ga). Unintentionally present Fe³⁺ (3d⁵) and Cr³⁺ (3d³) transition-metal ions serve as the corresponding electron traps. The hole is localized in a nonbonding p orbital on a threefold-coordinated oxygen ion …

Real-Time Sensing Of Single-Ligand Delivery With Nanoaperture-Integrated Microfluidic Devices, W. Elliott Martin, Ning Ge, Bernadeta R. Srijanto, Emily Furnish, C. Patrick Collier, Christine A. Trinkle, Christopher I. Richards

Chemistry Faculty Publications

The measurement of biological events on the surface of live cells at the single-molecule level is complicated by several factors including high protein densities that are incompatible with single-molecule imaging, cellular autofluorescence, and protein mobility on the cell surface. Here, we fabricated a device composed of an array of nanoscale apertures coupled with a microfluidic delivery system to quantify single-ligand interactions with proteins on the cell surface. We cultured live cells directly on the device and isolated individual epidermal growth factor receptors (EGFRs) in the apertures while delivering fluorescently labeled epidermal growth factor. We observed single ligands binding to EGFRs, …

Estimating Index Of Refraction For Specular Reflectors Using Passive Polarimetric Hyperspectral Radiance Measurements, Jacob A. Martin, Kevin C. Gross

Faculty Publications

Results of a method of estimating index of refraction from passive, polarimetric hyperspectral imaging radiance measurements are presented. As off-nadir viewing hyperspectral imaging platforms gain prominence, estimating index of refraction, which is invariant to viewing angle, may prove advantageous to estimating the emissivity, which is not. Results show that index of refraction can be retrieved to within 8% rms error for fused silica and sapphire glass targets, while simultaneously estimating object temperature. The accuracy and self-consistency of this technique for estimating index of refraction are shown to compare favorably to the maximum smoothness temperature–emissivity separation algorithm. Additionally, the results show …

Operating Temperature Of A Solar Thermal Stirling Engine, Spencer Beck

Senior Theses

This paper explores the relationship between the operating temperature and electricity production of a simple heat engine. A Stirling engine was designed and constructed which runs on solar thermal energy collected by a Fresnel lens. The surface area of the solar collector was varied. This manipulated the operating temperature of the Stirling engine in order to measure power output. The mechanical energy from the engine was converted to electricity using a DC motor running in reverse, acting like a generator, in conjunction with an Arduino for data collection. Although adjustments must be made in order to improve the efficiency of …

Are Solar Panels A Viable Power Source For A Green Energy Vehicle?, Mason C. Adams

Senior Theses

A solar cell powered go-kart has been built and tested. The result shows using solar energy alone cannot meet the requirement of running a regular passenger car. This is due to the limited surface area of the passenger car. This thesis also discusses the operating principles of solar panels, the physics of P type and N type semiconductors, and the formation of the PN junction, as well as the solar current. Modifications of an existing go-kart are described in detail in this thesis. Suggestions for making green vehicles are discussed as well.

Ferroelectric-Semiconductor Systems For New Generation Of Solar Cells, Rahmatollah Eskandari

LSU New Orleans Theses and Dissertations

This dissertation includes two parts. In the first part the study is focused on the fabrication of multifunctional thin films for photovoltaic applications. There is no doubt about the importance of transforming world reliance from traditional energy resources, mainly fossil fuel, into renewable energies. Photovoltaic section still owns very small portion of the production, despite its fast growth and vast research investments. New methods and concepts are proposed in order to improve the efficiency of traditional solar cells or introduce new platforms. Recently, ferroelectric photovoltaics have gained interest among researchers. First objective in application of ferroelectric material is to utilize …

Understanding Photovoltaic Properties Of Pbs Quantum Dot Solids Via Solution Contacting, Vitalii Dereviankin, Erik Johansson

Student Research Symposium

Photovoltaic (PV) devices based on PbS quantum dot (QD) solids demonstrate high photontoelectron conversion yields. However, record power conversion efficiency remain low, in part due to small photovoltages, which in turn are affected by both bulk and interfacial defects. Their relative impacts on limiting the photovoltaic performance of QD solids are not known. Interfacial defects can be formed when contacting a semiconductor and may dominate the semiconductor/metal or metaloxide junction properties. The objective of this study is to explore whether electrochemical contacting using liquid electrolytes provides means of contacting QD solids without introducing interfacial defects. We have initially focused on …

Investigating The Classical And Non-Classical Mechanical Properties Of Gan Nanowires, Mohammad Reza Zamani Kouhpanji

Electrical and Computer Engineering ETDs

Study and prediction of classical and non-classical mechanical properties of GaN is crucial due to the potential application of GaN nanowires (NWs) in piezoelectric, probe-based nanometrology, and nanolithography areas. GaN is mainly grown on sapphire substrates whose lattice constant and thermal expansion coefficient are significantly different from GaN. These discrepancies cause mechanical defects and high residual stresses and strains in GaN, which reduce its quantum efficiency.

Specifically, for nanoscale applications, the mechanical properties of materials differ significantly compared to the bulk properties due to size-effects. Therefore, it is essential to investigate the mechanical properties of GaN NWs using the non-classical …

A Novel Technique For Designing High Power Semiconductor Optical Amplifier (Soa)-Based Tunable Fiber Compound-Ring Lasers Using Low Power Optical Components, Muhammad A. Ummy, Simeon Bikorimana, Roger Dorsinville

Publications and Research

A simple, stable and inexpensive dual-output port widely tunable semiconductor optical amplifier (SOA)-based fiber compound-ring laser structure is demonstrated. This unique nested ring cavity enables high optical power to split into different branches where amplification and wavelength selection are achieved by using low-power SOAs and a tunable filter. Furthermore, two Sagnac loop mirrors, which are spliced at the two ends of the compound-ring cavity not only serve as variable reflectors but also channel the optical energy back to the same port without using any high optical power combiner. We propose and discuss how the demonstrated fiber compound-ring laser structure can …

Compositionally Graded Indium Gallium Nitride Solar Cells, Christopher Matthews

Electrical Engineering Undergraduate Honors Theses

For the past several decades, methods to harvest solar energy have been investigated intensively. A majority of the work done in this field has been on solar cells made with silicon – the most mature semiconductor material. Recent developments in material fabrication and processing techniques have enabled other semiconductor materials to attract practical interest and research effort as well. Indium gallium nitride (InGaN) is one such material. The material properties of InGaN indicate that solar cells made with it have the potential to achieve much higher power density than a standard silicon solar cell. High power density InGaN solar cells …

Infrared Energy Conversion In Plasmonic Fields At Two-Dimensional Semiconductors, Gregory Thomas Forcherio

Graduate Theses and Dissertations

Conversion of infrared energy within plasmonic fields at two-dimensional, semiconductive transition metal dichalcogenides (TMD) through plasmonic hot electron transport and nonlinear frequency mixing has important implications in next-generation optoelectronics. Drude-Lorentz theory and approximate discrete dipole (DDA) solutions to Maxwell’s equations guided metal nanoantenna design towards strong infrared localized surface plasmon resonance (LSPR). Excitation and damping dynamics of LSPR in heterostructures of noble metal nanoantennas and molybdenum- or tungsten-disulfide (MoS2; WS2) monolayers were examined by parallel synthesis of (i) DDA electrodynamic simulations and (ii) near-field electron energy loss (EELS) and far-field optical transmission UV-vis spectroscopic measurements. Susceptibility to second-order nonlinear frequency …

Investigation Of Fes2 Nanoparticles For Use In Optoelectronic And Thermoelectric Applications, Rick Tefal Eyi Nkoghe

Graduate Theses and Dissertations

Iron pyrite (FeS2) is the most abundant sulfide material on earth. This material has been widely investigated by researchers because of its optical properties. However, it has been difficult to produce High efficiency FeS2 based solar cells. This is due to many different impurities that arise when making the materials. The ability to synthesize pure pyrite FeS2 material is therefore critical for applications.

Pure Iron pyrite nanocrystals were synthesized using hot injection by mixing sulfur with an iron precursor in the presence of an amine. To improve the stability, shorter ligands replaced the native amines ligands. The stability of the …

Plasmon-Mediated Energy Conversion In Metal Nanoparticle-Doped Hybrid Nanomaterials, Jeremy Dunklin

Graduate Theses and Dissertations

Climate change and population growth demand long-term solutions for clean water and energy. Plasmon-active nanomaterials offer a promising route towards improved energetics for efficient chemical separation and light harvesting schemes. Two material platforms featuring highly absorptive plasmonic gold nanoparticles (AuNPs) are advanced herein to maximize photon conversion into thermal or electronic energy. Optical extinction, attributable to diffraction-induced internal reflection, was enhanced up to 1.5-fold in three-dimensional polymer films containing AuNPs at interparticle separations approaching the resonant wavelength. Comprehensive methods developed to characterize heat dissipation following plasmonic absorption was extended beyond conventional optical and heat transfer descriptions, where good agreement was …

Fabrication And Study Of The Structure And Magnetism Of Rare-Earth Free Nanoclusters, Bhaskar Das

Department of Physics and Astronomy: Dissertations, Theses, and Student Research

No abstract provided.

Effect Of Plasma Dynamics On Gallium Nitride Nanorod And Growth By Molecular Beam Epitaxy, Dever Paul Norman

Theses and Dissertations

GaN is a wide bandgap semiconductor known for its use in high-frequency switching electronics and laser diodes, its stability as a high-temperature transistor material, and a radiation resistance which makes it an ideal material for space applications. Additionally, the discovery of the bandgap tunability of nitride materials using GaN has led to successful development of adjustable wavelength LED devices. However, the success of devices far outpaces the understanding of their material growth, making advances difficult to build upon. Plasma- Assisted Molecular Beam Epitaxy (PA-MBE) is an ideal growth method for achieving very precise structures for detailed study. Although plasma itself …

Defect-Related Optical Absorption Bands In Cdsip2 Crystals, Elizabeth M. Scherrer, Brant T. Kananen, Eric M. Golden, F. Kenneth Hopkins, Kevin T. Zawilski, Peter G. Schunemann, Larry E. Halliburton, Nancy C. Giles

Faculty Publications

When used as optical parametric oscillators, CdSiP₂ crystals generate tunable output in the mid-infrared. Their performance, however, is often limited by unwanted optical absorption bands that overlap the pump wavelengths. A broad defect-related optical absorption band peaking near 800 nm, with a shoulder near 1 µm, can be photoinduced at room temperature in many CdSiP₂ crystals. This absorption band is efficiently produced with 633 nm laser light and decays with a lifetime of ∼0.5 s after removal of the excitation light. The 800 nm band is accompanied by a less intense absorption band peaking near 1.90 µm. Data …

Single Molecule-Level Study Of Donor-Acceptor Interactions And Nanoscale Environment In Blends, Nicole Quist, Rebecca Grollman, Jeremy Rath, Alex Robertson, Michael Haley, John E. Anthony, Oksana Ostroverkhova

Chemistry Faculty Publications

Organic semiconductors have attracted considerable attention due to their applications in low-cost (opto)electronic devices. The most successful organic materials for applications that rely on charge carrier generation, such as solar cells, utilize blends of several types of molecules. In blends, the local environment strongly influences exciton and charge carrier dynamics. However, relationship between nanoscale features and photophysics is difficult to establish due to the lack of necessary spatial resolution. We use functionalized fluorinated pentacene (Pn) molecule as single molecule probes of intermolecular interactions and of the nanoscale environment in blends containing donor and acceptor molecules. Single Pn donor (D) molecules …

Assessment Of Individual Photovoltaic Module Performance After 26 Years Of Field Exposure At The Telonicher Marine Lab In Trinidad, California, Jake Rada

Projects

In 1990, 192 ARCO M75 photovoltaic (PV) modules were installed as a part of the Schatz Solar Hydrogen Project at the Humboldt State University (HSU) Telonicher Marine Lab in Trinidad, California, within 150 m of the Pacific Ocean. This 9.2 kW-rated PV array was used to power the marine laboratory air compressor and an electrolyzer. Individual current-voltage (IV) curve tests were performed on each of the PV modules prior to the array’s construction in 1990 and again in 2001, 2010, and, most recently, in 2016, following decommissioning of the array. After 25.5 years of use, 188 of the original 192 …

The Effects Of Carboxylic Acids In Aluminum Anodizing, Abby E. Koczera

Honors Theses and Capstones

Hard-anodized alumina coatings were formed in sulfuric acid at low temperature and high current density in the presence of carboxylic acid additives. Citric acid, trimesic acid, mellitic acid and ethylenediaminetetraacetic acid (EDTA) were utilized in varying concentrations. The additives were chosen for their capacity to form complexes with tri-valent aluminum and hence impart chemical stability to the coatings. The coatings were sealed in boiling water, and corrosion resistance was observed in a high pH solution of potassium hydroxide. The coatings were examined using scanning electron microscopy (SEM) to assess coating thickness and pore dimensions. Thicker coatings were produced when the …

Study Of Nano-Bio Interfaces In Nano-Bio Conjugates: Nanoparticles Of Zinc Oxide (Zno) And Biomolecules Of Glucose, Cytosine, And Thymine, Bithi Paul

Graduate Theses/Dissertations

Nano conjugates, composites of inorganic nanomaterials and bio molecules such as DNA, RNA and proteins, establish a sequence of wide varieties of nano-bio boundaries. The formation of these boundaries strongly depends on bio physicochemical reaction of biomolecules coated on the surface of nanomaterials. I am investigating various nano-bio conjugates consisting of zinc oxide (ZnO) nanoparticles with simple biomolecules including glucose and the nitrogenous bases of DNA such as cytosine and thymine. All nano-bio conjugates were fabricated using a standard bio-chemical synthesis process. Structural, physical, bio-chemical interface properties of nano-bio composites were probed using X-ray diffraction (XRD), Raman spectroscopy, and photoluminescence …

Electro-Optic Contact Poling Of Polymer Waveguide Devices And Thin Films, Michael Briseno

Dissertations, Master's Theses and Master's Reports

Optical communication is a high speed, large bandwidth, low cost, and power efficient method of transferring data over short-haul and long-haul channels. Optical communication requires devices (optical modulators) that utilize the originating electrical signal information to modulate a corresponding optical signal. State of the art optical modulators can be used for communicating signals at modulation frequencies up to 100 GHz and faster. Polymer modulators are used over lithium niobate due to the large potential electro-optic coefficient, which has been shown to be as high as 226 pm/V in thin films.

Organic electro-optic polymers used in thin film modulators contain nonlinear …