Open Access. Powered by Scholars. Published by Universities.®
Semiconductor and Optical Materials Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
- Publication Year
- Publication
- Publication Type
Articles 1 - 22 of 22
Full-Text Articles in Semiconductor and Optical Materials
Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov
Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov
Theses and Dissertations
This study explores the potential of beryllium (Be) as an alternative dopant to magnesium (Mg) for achieving higher hole concentrations in gallium nitride (GaN). Despite Mg prominence as an acceptor in optoelectronic and high-power devices, its deep acceptor level at 0.22 eV above the valence band limits its effectiveness. By examining Be, this research aims to pave the way to overcoming these limitations and extend the findings to aluminum nitride and aluminum gallium nitride (AlGaN) alloy. Key contributions of this work include. i)Identification of three Be-related luminescence bands in GaN through photoluminescence spectroscopy, improving the understanding needed for further material …
Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev
Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev
Theses and Dissertations
Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the MgGa acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …
Characterizing Gesn Alloys By Sem/Eds And Photoluminescence Spectroscopy, Christopher M. Sutphin
Characterizing Gesn Alloys By Sem/Eds And Photoluminescence Spectroscopy, Christopher M. Sutphin
Theses and Dissertations
Germanium tin (GeSn) alloys are being studied as potential transition metal (Group IV) photoelectric semiconductors or optical detectors. GeSn alloys could be employed as an optically active material within a computer. Compared to current technologies, a direct band gap GeSn alloy can be engineered to operate with higher thermal stability and efficiency. The GeSn alloy studied was composed of Ge and Si substrates with various Sn percentages grown using remote plasma-enhanced chemical vapor deposition (RPECVD). Photoluminescence spectroscopy (PL) techniques were initially used to determine the GeSn properties, including the band gap. The Ge91.2Sn8.8 PL spectra suggested the …
Pulsed Laser Annealing On The Optoelectronic Properties Of Zno Thin Films, Md Abu Zobair
Pulsed Laser Annealing On The Optoelectronic Properties Of Zno Thin Films, Md Abu Zobair
Graduate Theses/Dissertations
ZnO thin films have attracted great attention recently due to their unique electronic and optical properties. However, for proper implementation of ZnO in electronic devices it is necessary to understand the role of native point defects present inside the material as these wide bandgap semiconductors are inherently n-type due to oxygen vacancies. The objective is to control the electronic and optical properties of ZnO thin films through pulsed laser annealing (PLA). Thin films of ZnO have been grown on different substrates using pulsed laser deposition. Then PLA of the films are done by changing laser parameters (energy, frequency, pulse width, …
Deep Donors And Acceptors In Β-Ga2O3 Crystals: Determination Of The Fe2+/3+ Level By A Noncontact Method, Christopher A. Lenyk, Timothy D. Gustafson, Larry E. Halliburton, Nancy C. Giles
Deep Donors And Acceptors In Β-Ga2O3 Crystals: Determination Of The Fe2+/3+ Level By A Noncontact Method, Christopher A. Lenyk, Timothy D. Gustafson, Larry E. Halliburton, Nancy C. Giles
Faculty Publications
Electron paramagnetic resonance (EPR), infrared absorption, and thermoluminescence (TL) are used to determine the Fe2+/3+ level in Fe-doped β-Ga2O3 crystals. With these noncontact spectroscopy methods, a value of 0.84 ± 0.05 eV below the conduction band is obtained for this level. Our results clearly establish that the E2 level observed in deep level transient spectroscopy (DLTS) experiments is due to the thermal release of electrons from Fe2+ ions. The crystals used in this investigation were grown by the Czochralski method and contained large concentrations of Fe acceptors and Ir donors, and trace amounts of Cr …
Structure And Properties Of Zno-Zns Heterostructures, Sanchali Das
Structure And Properties Of Zno-Zns Heterostructures, Sanchali Das
Graduate Theses/Dissertations
Heterostructures consisting of at least two layers of dissimilar materials have always been well studied due to potential applications in nano-electronic and optoelectronic devices. In this study, I have investigated the structural and physical properties of zinc oxide -zinc sulfide (ZnO-ZnS) based heterostructures of thin films and core-shell nanoparticles. Pulsed laser deposition technique was employed to grow ZnO thin film on sapphire substrate. ZnO-ZnS heterostructures were obtained using hydrothermal synthesis where thiourea has served as a precursor solution for the source of sulfur. X-ray diffraction analysis on the parent and the sulfidized samples gives the information about the crystallinity and …
Near Bandgap Two-Photon Excited Luminescence Of Inas Quantum Dots, Xian Hu
Near Bandgap Two-Photon Excited Luminescence Of Inas Quantum Dots, Xian Hu
Graduate Theses and Dissertations
Semiconductor quantum dots (QDs) confine carriers in three dimensions, resulting in atomic-like energy levels as well as size-dependent electrical and optical properties. Self-assembled III-V QD is one of the most studied semiconductor QDs thanks to their well-established fabrication techniques and versatile optical properties. This dissertation presents the photoluminescence (PL) study of the InAs/GaAs QDs with both above bandgap continuous-wave excitation (one-photon excitation) and below-bandgap pulse excitation (two-photon excitation). Samples of ensemble QDs, single QD (SQD), and QDs in a micro-cavity, all grown by molecular beam epitaxy, are used in this study. Morphology of these samples was examined using atomic force …
Copper-Doped Lithium Triborate (Lib3o5) Crystals: A Photoluminescence, Thermoluminescence, And Electron Paramagnetic Resonance Study, Brant E. Kananen, John W. Mcclory, Nancy C. Giles, Larry E. Halliburton
Copper-Doped Lithium Triborate (Lib3o5) Crystals: A Photoluminescence, Thermoluminescence, And Electron Paramagnetic Resonance Study, Brant E. Kananen, John W. Mcclory, Nancy C. Giles, Larry E. Halliburton
Faculty Publications
When doped with copper ions, lithium borate materials are candidates for use in radiation dosimeters. Copper-doped lithium tetraborate (Li2B4O7) crystals have been widely studied, but little is known thus far about copper ions in lithium triborate (LiB3O5) crystals. In the present investigation, Cu+ ions (3d10) were diffused into an undoped LiB3O5 crystal at high temperature. These ions occupy both Li+ and interstitial positions in the crystal. A photoluminescence (PL) band peaking near 387 nm and a photoluminescence excitation (PLE) band peaking near 273 nm verify that a portion of these Cu+ ions are located at regular Li+ sites. After an …
Photoluminescence From Gan Co-Doped With C And Si, Mykhailo Vorobiov
Photoluminescence From Gan Co-Doped With C And Si, Mykhailo Vorobiov
Theses and Dissertations
This thesis devoted to the experimental studies of yellow and blue luminescence (YL and BL relatively) bands in Gallium Nitride samples doped with C and Si. The band BLC was at first observed in the steady-state photoluminescence spectrum under high excitation intensities and discerned from BL1 and BL2 bands appearing in the same region of the spectrum. Using the time-resolved photoluminescence spectrum, we were able to determine the shape of the BLC and its position at 2.87 eV. Internal quantum efficiency of the YL band was estimated to be 90\%. The hole capture coefficient of the BLC …
Photoluminescence Studies Of Amorphous Boron Carbide And Tungsten Diselenide Thin Films, David M. Allendorfer
Photoluminescence Studies Of Amorphous Boron Carbide And Tungsten Diselenide Thin Films, David M. Allendorfer
Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research
For many years scientists and engineers have been researching semi-conducting materials for use in a broad array of electronic devices. With the growing demand for faster, smaller and more efficient electronics, new materials must be characterized and their properties quantified. The focus of this thesis is to develop a system to measure photoluminescence in opto-electronic materials. Photoluminescence measurements are important because it can give researchers valuable information about a material’s band structure. This thesis begins by presenting the carrier recombination mechanisms and how they apply to photoluminescence. A system was developed to measure photoluminescence spectroscopy. This system was tested with …
Beyond Conventional C-Plane Gan-Based Light Emitting Diodes: A Systematic Exploration Of Leds On Semi-Polar Orientations, Morteza Monavarian
Beyond Conventional C-Plane Gan-Based Light Emitting Diodes: A Systematic Exploration Of Leds On Semi-Polar Orientations, Morteza Monavarian
Theses and Dissertations
Despite enormous efforts and investments, the efficiency of InGaN-based green and yellow-green light emitters remains relatively low, and that limits progress in developing full color display, laser diodes, and bright light sources for general lighting. The low efficiency of light emitting devices in the green-to-yellow spectral range, also known as the “Green Gap”, is considered a global concern in the LED industry. The polar c-plane orientation of GaN, which is the mainstay in the LED industry, suffers from polarization-induced separation of electrons and hole wavefunctions (also known as the “quantum confined Stark effect”) and low indium incorporation efficiency that …
A Systematic Study Of The Optical And Electrical Properties Of Ge1-YSnY And Ge1-X-YSiXSnY Semiconductor Alloys, Thomas R. Harris
A Systematic Study Of The Optical And Electrical Properties Of Ge1-YSnY And Ge1-X-YSiXSnY Semiconductor Alloys, Thomas R. Harris
Theses and Dissertations
In order to fully utilize newly developed Ge1-ySny and Ge1-x-ySixSny materials for new novel optoelectronic devices, the optical and electrical properties of these alloys were investigated using photoluminescence (PL) and Hall-effect measurements. Direct bandgap PL emission was observed from almost all the samples, making them very promising candidates for Si-based light emitting devices. T-dependent PL studies also indicate that the indirect-to-direct bandgap transition of Ge1-ySny alloys might take place at a much lower Sn content than the theory predicts. T-dependent Hall-effect measurements showed both degenerate parallel conducting layers as …
Feasibility Of Manipulating Correlated Color Temperatures With A Phosphor Converted High-Powered Light Emitting Diode White Light Source, Matthew Michael Little
Feasibility Of Manipulating Correlated Color Temperatures With A Phosphor Converted High-Powered Light Emitting Diode White Light Source, Matthew Michael Little
Master's Theses
In this thesis we examine the feasibility of developing a white light source capable of producing colors between 2500 and 7500 Kelvin on the black-body radiator spectrum by simply adjusting amperage to a blue and ultraviolet (UV) light emitting diode (LED). The purpose of a lighting source of this nature is to better replicate daylight inside a building at a given time of day. This study analyzes the proposed light source using a 385 nm UV LED, a 457 nm blue LED, a 479 nm blue LED, a 562 nm peak cerium doped yttrium aluminum garnet (YAG:Ce) phosphor, and a …
Characterization Of Passivated Indium Antimonide, Catherine Ann Taylor
Characterization Of Passivated Indium Antimonide, Catherine Ann Taylor
Theses and Dissertations
Infrared absorption and photoluminescence measurements have been used to optically characterize bulk-grown, 680-μm thick, indium antimonide (InSb), both as-grown and after passivation by either anodization or a 700-Å layer of silicon oxide (SiOx). Spectra were obtained using Fourier transform infrared (FT-IR) spectroscopy. Results include the effects of sample temperature in the range of 10 to 300 K and 4.636 μm laser pump power in the range of 28 mW to 1.43 W for the photoluminescence spectrum.
Optical Characterization And Modeling Of Compositionally Matched Indium Arsenide-Antimonide Bulk And Multiple Quantum Well Semiconductors, Scott C. Phillips
Optical Characterization And Modeling Of Compositionally Matched Indium Arsenide-Antimonide Bulk And Multiple Quantum Well Semiconductors, Scott C. Phillips
Theses and Dissertations
Indium arsenide-antimonide (InAsSb) semiconductors have been determined to emit in the 3-5 micrometer range, the window of interest for countermeasures against infrared electro-optical threats. This experiment set out to cross the bulk to quantum well characterization barrier by optically characterizing two sets of compositionally matched type I quantum well and bulk well material samples. Absorption measurements determined the band gap energy of the bulk samples and the first allowed subband transition for the quantum wells. By collecting absorption spectra at different temperatures, the trend of the energy transitions was described by fitting a Varshni equation to them. The expected result …
Time-Resolved Photoluminescence Of Inas/Gainsb Quantum Well Lasers, Michael R. Mckay
Time-Resolved Photoluminescence Of Inas/Gainsb Quantum Well Lasers, Michael R. Mckay
Theses and Dissertations
In the world of semiconductor photonic device fabrication, one important objective may be to extract as much light as possible from the device. In these devices, photons are created when electrons recombine with holes by transitioning from a high-energy state to a lower one. Unfortunately, electron-hole recombination does not always result in the formation of a photon. There are three basic types of recombination: the first results in the formation of a photon and is called radiative recombination; and the second and third, known as Shockley-Read-Hall and Auger recombination, result in the heating of the device and do not produce …
Photoluminescence Of Single Quantum Well Structures In Gallium Arsenide, Christian A. Bartholomew
Photoluminescence Of Single Quantum Well Structures In Gallium Arsenide, Christian A. Bartholomew
Theses and Dissertations
The continued development of state-of the-art semiconductor technologies and devices by the United States Air Force and the Department of Defense requires accurate and efficient techniques to evaluate and model these new materials. Of particular interest to the Air Force are quantum well structures which can be used for small-scale laser sources in fly-by-light applications, as efficient infrared countermeasures to heat-seeking missiles, or as advanced seekers in optically guided missiles. This thesis provides the initial experimental procedures and data necessary to begin producing accurate yet robust models. Although carrier effective masses could not be evaluated using hot-electron photoluminescence, photoluminescence excitation …
Photoluminescence And Electroluminescence Of Erbium And Neodymium Implanted Semiconductors, James R. Hunter
Photoluminescence And Electroluminescence Of Erbium And Neodymium Implanted Semiconductors, James R. Hunter
Theses and Dissertations
Low temperature photoluminescence (PL) and electroluminescence (EL) measurements were used to study the excitation of erbium- and neodymium-implanted GaAs and AlxGa1-xAs (x=0. 1, 0.3) pn-junctions. The rare-earth (RE) emissions were investigated as a function of ion dose, aluminum mole fraction, laser excitation power, and applied forward bias voltage for the implanted samples. Low temperature PL was also measured from Er doped silicon grown by the metalorganic chemical vapor-phase deposition (MOCVD) method using various growth parameters.. The MOCVD-grown Si samples were studied as a function of metalorganic source temperature, silane (SiH4) flow, growth time, and …
Photoluminescence Spectroscopy Of 4h- And 6h-Sic, William A. Davis
Photoluminescence Spectroscopy Of 4h- And 6h-Sic, William A. Davis
Theses and Dissertations
Typical undoped bulk grown SiC shows n- or p-type conductivity due to residual impurities such as nitrogen, boron, or aluminum. In order to produce high resistivity material, vanadium can be used as a compensating dopant. Since vanadium is an amphoteric dopant in SiC, it produces either a donor state, VSi4+(3d1) → VSi5+(3d0), or an acceptor state, VSi4+(3d1) → VSi3+(3d2). Thus, vanadium doping can compensate both n- and p-type conductivity. In this work, vanadium doped and undoped 4H- and 6H-SiC grown …
The Excitation Mechanism Of Praseodymium-Doped Semiconductors, Paul L. Thee
The Excitation Mechanism Of Praseodymium-Doped Semiconductors, Paul L. Thee
Theses and Dissertations
This study on praseodymium Pr luminescence in AlxGa1-xAs was conducted to enhance the understanding of the excitation mechanism. Pr was implanted at 390 keV with doses from 5 x 1012 to 5 x 1013 sq cm into AlxGa1-xAs x0.0 to 0.50 wafers which were annealed using the rapid thermal annealing RTA method. Low temperature photoluminescence PL was conducted using an Ar-ion laser and Ge detector. PL emissions of Pr from all hosts include peaks near 1.3 and 1.6 µm which are assigned to the intra-4f transitions of 1G4 yielding 3H5 …
Luminescence Study Of Ion-Implanted And Mbe-Grown Er-Doped Gaas And AlXGa1-XAs, Jose E. Colon
Luminescence Study Of Ion-Implanted And Mbe-Grown Er-Doped Gaas And AlXGa1-XAs, Jose E. Colon
Theses and Dissertations
The excitation and de-excitation mechanisms of the 1.54 microns emissions, from ion implanted and MBE grown GaAs:Er and AlxGa1-xAs:Er, were studied through luminescence experiments. Experimental techniques included photoluminescence, time resolved photoluminescence, and selective excitation photoluminescence. The Er3+ emissions were studied as a function of Er concentration, aluminum mole friction, n- and p-type doping level, and annealing temperature. In addition oxygen co-doping studies were done in order to determine the role played by oxygen in the Er3+ luminescence.
Low Temperature Photoluminescence Study Of Holmium And Thulium Implanted Into Iii-V Semiconductors And Silicon, Eric Silkowski
Low Temperature Photoluminescence Study Of Holmium And Thulium Implanted Into Iii-V Semiconductors And Silicon, Eric Silkowski
Theses and Dissertations
Low temperature photoluminescence studies were performed on holmium implanted into InP, GaAs, and Si; and thulium implanted into AlGaAs, GaAs, and Si. Samples were annealed by the conventional furnace and rapid thermal techniques. None of the characteristic 4f emissions of holmium were found in the spectral region of .73 to 1.55 eV. AlGaAs:Tm showed strong thulium emissions in the .93 to 1.03 eV region. These emissions were studied and compared to those in GaAs:Tm. Low and high temperature annealed samples showed evidence of trivalent Tm centers. Temperature dependence studies showed that thulium 4f emissions were present above 200 K but …