Semiconductor and Optical Materials Commons^™

Nanomagnet Based Reservoir Computing And Quantum Control, Fahim F. Chowdhury

Theses and Dissertations

Conventional CMOS scaling has driven remarkable advances in computing but faces increasing physical and energy constraints, motivating alternative computing paradigms that integrate memory and computation while improving energy efficiency. Nanoscale magnetic systems offer a promising platform for such approaches because their intrinsic nonlinear dynamics and localized magnetic fields can support both classical and quantum information processing. This thesis investigates nanomagnetic systems for physical reservoir computing and, with primary emphasis, for localized quantum control of spin qubits.

The first part explores dipole-coupled nanomagnet arrays as physical reservoirs. Micromagnetic simulations demonstrate nonlinear dynamical behavior with high short-term memory and parity-check capacity, enabling …

A Fault-Tolerant Exchange-Coupled Spin-Ensemble Qubit At Elevated-Temperatures, Aniruddha Chakraborty

Theses and Dissertations

This thesis introduces a novel qubit architecture: the ferromagnetic exchange-coupled spin ensemble qubit (E-qubit), designed to address the noise-induced instability. In this work, the time evolution of the ensemble’s density matrix is studied using the Liouville–von Neumann equation. To benchmark against a single-spin qubit, the gate fidelity of an E-qubit is computed in the presence of thermal noise. Coherence time is also analyzed under identical thermal condition and a linear scaling is observed with qubit size . The results show that, at 6 K , the gate fidelity error (0.7 % ) of the seven- spin ensemble is an order …

Synthesis Of Selenium Nanostructures: Rods, Wires, And Fibers By Pulsed Laser Ablation In Liquids, Atikur Rahman

Theses and Dissertations

Selenium is a semiconductor that has a bulk energy bandgap of 1.74 eV, is mainly used in sensors, rectifiers, and advanced photovoltaic solar cells. Selenium is very important for the energy applications and was declared as Energy Critical Element (ECE) by the American Physical Society (APS) and the Materials Research Society (MRS). The goal of this dissertation was to control the growth of selenium when being irradiated by a pulsed laser within a liquid environment. The method called “Pulsed Laser Ablation in Liquids” is a green synthesis technique that allows for ligand-free nanoparticles to be created. Laser repetition rates were …

Characterization Of An Omega Type Bi-Anisotropic Material, Moriel Gindi

Theses and Dissertations

A theory is presented for the extraction of the complete set of material parameters for a bi-anisotropic sample consisting of conductive omega-type particles governed by the mm21′ point-group symmetry. A rectangular-to-square wave-guide can be used to obtain the required measurements by allowing three distinct orientations of the material. The focus of this work is to develop the appropriate theory detailing the derivation of how the material parameters are extracted from the measurements in an analytical methodology that is similar in manner to the well-known Nicolson-Ross-Weir (NRW) algorithm.

Spectroscopic Characterization Of Trivalent Holmium In Liyf4 And Bay2F8 Crystals, Vivian R. Hedberg

Theses and Dissertations

Yttrium-fluoride crystals doped with trivalent holmium are promising laser gain media for mid-infrared laser systems. To accurately model laser systems, a complete optical characterization of the laser gain medium is required. The key modeling parameters were obtained by a spectroscopic investigation of Ho³⁺ in LiYF₄ and BaY₂F₈ crystal hosts. Several important mid-infrared laser transitions were characterized at nominal Ho³⁺ ion concentrations of 10-30 at.%. Polarized emission cross-sections were determined from the fluorescence spectra using the Füchtbauer-Ladenburg method. Polarized absorption cross-sections were obtained using the Integral Reciprocity method. The upper-state lifetimes were measured at room …

The Effect Of Mechanical Strain On The Electronic Conductivity Of Α- Fe2o3: A Density Functional Theory Study, Sheriff Naziru Abdulmutalib

Theses and Dissertations

Hydrogen has emerged as a promising future energy carrier due to its ability to produce zero carbon dioxide (CO2) emissions when burned. However, the limited natural abundance of hydrogen necessitates the development of cost-effective and environmentally friendly methods for large-scale hydrogen production. Among the different hydrogen production approaches, photoelectrochemical water splitting, which employs a photoanode material in a cell using solar energy to split water into hydrogen and oxygen, is the focus of this work. α-Fe2O3 (hematite) is a photoanode material that shows a promising future for hydrogen generation in a photoelectrochemical cells due to its cheapness, availability, and its …

Nano-Patterned Si Structures For Optical Filters And Electro-Mechanical Relays: Fabrication, Characterization, Prospects, And Limitations, Md Ataul Mamun

Theses and Dissertations

Nanofabrication technology, especially nanopatterning, is a rapidly advancing field that has already resulted in creating novel devices and holds promise for producing even more with unmatched performance. These techniques also allow us to gain insight into physical phenomena at the micro- and nanoscale. The ultimate performance of nanofabricated devices and their compatibility with existing Si-based CMOS technology hinge upon the careful selection of materials and precise design, coordinated with meticulous pattern transfer. In this work, we applied nanopatterning techniques on silicon to create optical filters for the shortwave infrared (SWIR) region and nanoelectromechanical system (NEMS) relay-based logic gates. Additionally, these …

Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov

Theses and Dissertations

This study explores the potential of beryllium (Be) as an alternative dopant to magnesium (Mg) for achieving higher hole concentrations in gallium nitride (GaN). Despite Mg prominence as an acceptor in optoelectronic and high-power devices, its deep acceptor level at 0.22 eV above the valence band limits its effectiveness. By examining Be, this research aims to pave the way to overcoming these limitations and extend the findings to aluminum nitride and aluminum gallium nitride (AlGaN) alloy. Key contributions of this work include. i)Identification of three Be-related luminescence bands in GaN through photoluminescence spectroscopy, improving the understanding needed for further material …

Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev

Theses and Dissertations

Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the Mg_Ga acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …

Elucidating Self-Assembly Of Semiconducting Polymers In The Presence Of A Low Molecular Weight Gelator, Madhubhashini Lakdusinghe

Theses and Dissertations

Semiconducting polymers with a conjugated backbone are important for energy storage, conversion, and biomedical field applications. The self-assembly process of these polymers in solutions depends on the polymer concentration and quality of the solvent. The electrical properties of thin films obtained from the solution phase depend on the self-assembled process. Thin films of conjugated polymer gels with percolating networks of self-assembled structures display improved electrical conductivities. In this dissertation, we studied the impact of the secondary gel matrix formed by a low molecular weight gelator, on the self-assembly of conjugated polymers, the preservation of assembled structures in dried gel films …

Angle Resolved Photoelectron Spectroscopy Study Of Germanium Tin: Experimentally Determined Electronic Band Gap And Surface Analysis, Jeremy M. Hunter

Theses and Dissertations

The germanium tin band gap is responsive to wavelengths in the mid to near infrared spectrum; this shows promise in meeting the detection demands of the next generation infrared detectors. Recent developments in germanium tin (GeSn) alloy growth techniques have peaked the scientific community’s interest in GeSn based optoelectrical and detection devices. Detection materials made entirely of group IV elements are compatible with complementary metal-oxide semiconductor manufacturing techniques. Understanding the surface chemistry of this alloy is fundamental for solid state device design and must be analyzed to optimize device performance. Studies have shown that with the addition of tin, the …

Characterizing Gesn Alloys By Sem/Eds And Photoluminescence Spectroscopy, Christopher M. Sutphin

Theses and Dissertations

Germanium tin (GeSn) alloys are being studied as potential transition metal (Group IV) photoelectric semiconductors or optical detectors. GeSn alloys could be employed as an optically active material within a computer. Compared to current technologies, a direct band gap GeSn alloy can be engineered to operate with higher thermal stability and efficiency. The GeSn alloy studied was composed of Ge and Si substrates with various Sn percentages grown using remote plasma-enhanced chemical vapor deposition (RPECVD). Photoluminescence spectroscopy (PL) techniques were initially used to determine the GeSn properties, including the band gap. The Ge_91.2Sn_8.8 PL spectra suggested the …

Identification And Characterization Of Point Defects In Nonlinear Optical Crystals: Barium Gallium Selenide And Lithium Triborate, Brian C. Holloway

Theses and Dissertations

Increased interest in developing new nonlinear optical materials has led to 3rd generation materials, such as BaGa4Se₇ and LiB₃O₅. These two nonlinear optical crystals have the potential to enable development of tunable lasers operating across the mid-wave infrared and the ultraviolet regions, respectively. Coherent light sources are used in the development of enhanced technologies with commercial and defense-based applications such as: health and environmental monitoring devices, next-generation infrared countermeasures, and ballistic missile booster exhaust plume characterization. The performance of optical materials in high-powered military applications is largely limited by the presence of defects. These defects …

Determination Of Nonlinear Optical Properties For Gallium Arsenide Phosphide Ternary Compounds And For Tin Thiohypodiphosphate, Peter F. Norris

Theses and Dissertations

The Department of Defense and the commercial sector rely on coherent light sources to emit light that transmits through the atmosphere. Nonlinear optical effects in crystalline materials can be used to generate the laser waves, but certain nonlinear effects negatively impact the performance of laser generating materials. This thesis focuses on characterizing nonlinear optical properties for gallium arsenide phosphide ternary compounds and for tin thiohypodiphosphate. The Maker Fringe experiment is used to determine the d-coefficients of the materials, which describe the magnitude of the nonlinear response of the material. The Z-Scan experiment is used to calculate the nonlinear refractive …

Towards The Integration Of Ferroelectric Negative Capacitance With Gallium Oxide Semiconductors For High Power Applications, Guillermo A. Salcedo

Theses and Dissertations

Gallium oxide is a relatively new semiconductor material with characteristics auspicious for high frequency and high-voltage applications. Although several research groups have already demonstrated radio-frequency (RF) devices on Ga₂O₃ with remarkable features, there is still room for improvement. For instance, the operating frequency of RF field-effect transistors (FET) decreases with the parasitic capacitance, which can be counteracted by higher gate capacitance. Implementing ferroelectric dielectrics with suitable parameters in Ga₂O₃ FET promises to enhance the gate capacitance and therefore increase operating frequency. This work investigated the effect of various factors (film composition, film thickness, TiN …

Formulation And Characterization Of Fast-Curing Plastic Scintillators With High-Z Loading, Theodore W. Stephens

Theses and Dissertations

Development of novel fast-curing plastic scintillators is highly advantageous due to their potential to be manufactured via 3D printing. Several formulations were developed that exhibit enhanced photon sensitivity, producing modest but discernible photopeaks at an incident gamma energy of 122 keV. The photon sensitivity is achieved via bismuth high-Z loading; however, this practice typically results in diminished light yields. Subsequent formulations, which varied the photoinitiator concentration and curing time, demonstrated successful curing with sufficient plastic hardness, reduced purple discoloration, reduced heat buildup during curing, and resulted in less cracking during the curing process, all of which were correlated with lower …

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem

Theses and Dissertations

Designing highly active, durable, and nonprecious electrodes for overall water splitting is of urgent scientific importance to realize sustainable hydrogen production. Accordingly, the need to search efficient energy production systems is of crucial necessity. In this thesis, two various systems for sustainable hydrogen production have been reported using electrochemical and photoelectrochemical pathways. In the first part of the thesis, electrochemical water splitting involving both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been established. To this end, an innovative approach is demonstrated to synthesize flower-like 3D homogenous trimetallic Mn, Ni, Co phosphide catalysts directly on nickel foam via …

Branched Chain Amino Acid Strain State Monitoring With Raman Spectroscopy And Plasmonic Bowtie Nanoantenna Devices For Early Disease Detection, Caroline A. Campbell

Theses and Dissertations

This work centers on the development and the down-selection of nano-manufactured devices to be used in conjunction with Raman spectroscopy for probing a branched chain amino acid. The nano-manufactured devices integrate plasmonic nanoantennas for the purpose of amplifying molecular fingerprints, which are otherwise difficult to detect, through Surface Enhanced Raman Spectroscopy (SERS). Plasmonic nanostructures can be utilized for a variety of biomedical and biochemical applications to detect the characteristic fingerprint provided by Raman Spectroscopy. The nano-manufactured devices create an electric field that amplifies minute perturbations and raises the signal above background noise. This may provide a deeper understanding of signal …

Design And Fabrication Of Zinc Oxide Optofluidic Laser Elements, Kyle T. Bodily

Theses and Dissertations

This thesis systematically goes through the derivation, simulation, and experimentation of Zinc Oxide optofluidic micro laser elements. Single and coupled ring resonators were simulated to show single mode transmission as well as enhanced coupling capabilities when surrounded by high refractive index liquid. Devices with diameters ranging from 100-500 µm were successfully fabricated inexpensively through standard cleanroom procedures. The devices were tested using two different pump laser systems. Testing included such factors as high pump intensity, various angles of excitation, and low temperature. In all cases PL emission was observed and recorded.

Nanoengineered Materials For Energy Conversion & Storage Applications: A Density Functional Theory Study, Ahmed Biby

Theses and Dissertations

The conventional approach for the development of novel materials has become long relative to the desired product development cycle. Thus, the sluggish pace of the development of materials within the conventional approach hinders the rapid transformation of the scientific outcomes into useful technological products. To this end, the field of hierarchical materials informatics evolved to bridge this gap. In this field, the multiscale material internal structure is considered the starting point and the core of this approach. This being said, the density functional theory (DFT) was used to generate useful materials data for the advancement of the hierarchical materials data-bases …

Nature-Inspired Material Strategies Towards Functional Devices, Sayantan Pradhan

Theses and Dissertations

Naturally sourced, renewable biomaterials possess outstanding advantages for a multitude of biomedical applications owing to their biodegradability, biocompatibility, and excellent mechanical properties. Of interest in this dissertation are silk (protein) and chitin (polysaccharide) biopolymers for the fabrication of functional biodevices. One of the major challenges restricting these materials beyond their traditional usage as passive substrate materials is the ability to combine them with high-resolution fabrication techniques. Initial research work is directed towards the fabrication of micropatterned, flexible 2D substrates of silk fibroin and chitin using bench-top photolithographic techniques. Research is focused on imparting electrochemical properties to silk proteins using conducting …

Perovskite Thin Films Annealed In Supercritical Fluids For Efficient Solar Cells, Gilbert Annohene

Theses and Dissertations

In the field of photovoltaics, scientists and researchers are working fervently to produce a combination of efficient, stable, low cost and scalable devices. Methylammonium lead trihalide perovskite has attracted intense interest due to its high photovoltaic performance, low cost, and ease of manufacture. Their high absorption coefficient, tunable bandgap, low-temperature processing, and abundant elemental constituent provide innumerable advantages over other thin film absorber materials. Since the perovskite film is the most important in the device, morphology, crystallization, compositional and interface engineering have been explored to boost its performance and stability. High temperatures necessary for crystallization of organic-inorganic hybrid perovskite films …

Dynamic Micromechanical Fabry-Perot Cavity Sensors Fabricated By Multiphoton Absorption Onto Optical Fiber Tips, Jeremiah C. Williams

Theses and Dissertations

This research leveraged two-photon polymerization microfabrication to integrate dynamic mechanical components with Fabry-Perot resonators onto the ends of low-loss optical fibers to prototype 3 micro-optic devices. The first device featured a multi-positional mirror that enabled thin-film deposition onto cavities of any length with mirrors of significant curvature, for refractive index sensing. The second device combined an FP cavity with a spring body featuring easily scalable stiffness for pressure sensing. The third device presented a high-speed rotating micro-anemometer for measuring a wide range of gas flows. All devices represent a significant reduction in size and weight over commercially available devices.

The Design Of A Continuous Wave Molecular Nitrogen Stimulated Raman Laser In The Visible Spectrum, Timothy J. Bate

Theses and Dissertations

Hollow-core photonic crystal fibers (HCPCFs) shows promise as a hybrid laser with higher nonlinear process limits and small beam size over long gain lengths. This work focuses on the design of a CW molecular nitrogen (N₂) stimulated Raman laser. N₂ offers Raman gains scaling up to 900 amg, scaling higher than H₂. The cavity experiment showed the need to include Rayleigh scattering in the high pressure required for N₂ Raman lasing. Even at relatively low pressure ssuch as 1,500 psi, high conversion percentages should be found if the fiber length is chosen based on …

Generation Of Warm Dense Plasma On Solar Panel Infrastructure In Exo-Atmospheric Conditions, Harrison C. Wenzel

Theses and Dissertations

The use of a weaponized thermo-nuclear device in exo-atmospheric conditions would be of great impact on the material integrity of orbiting satellite infrastructure. Particular damage would occur to the multi-layered, solar cell components of such satellites. The rapid absorption of X-ray radiation originating from a nuclear blast into these layers occurs over a picosecond time scale and leads to the generation of Warm Dense Plasma (WDP). While incredibly difficult and costly to replicate in a laboratory setting, a collection of computational techniques and software libraries may be utilized to simulate the intricate atomic and subatomic physics characteristics of such an …

Structure, Morphology And Composition-Property Elucidation Of Ni–Mo And Ni−Mo−P Nanocrystals For Water Splitting Reactions And Group Iv Alloy And Silicate Nanocrystals For Visible To Near Ir Optoelectronics, Ebtesam Hassan Abuelenein Eladgham

Theses and Dissertations

Abstract

Structure, Morphology and Composition-Property Elucidation of Ni–Mo and Ni−Mo−P Nanocrystals for Water Splitting Reactions and Group IV Alloy and Silicate Nanocrystals for Visible to Near IR Optoelectronics

by

Ebtesam Hassan Abuelenein Eladgham

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Advisor: Indika U Arachchige

Associate Professor, Department of Chemistry

Nanomaterials have gained a great attention because of their unique physical properties with size intermediate between molecular materials and extended solids. They have a large surface to volume ratio and display size tunable physical properties that was not …

Cuo/Cu Core/Shell Nanostructured Photoconductive Devices By Hwt And Hips, Khalidah Hussein Habeeb Al-Mayalee

Theses and Dissertations

Over recent years, great efforts are being dedicated to developing low cost and high-efficiency nanostructured design for optoelectronic applications. Nanostructured semiconductor materials have demonstrated superior performance as compared to bulk materials. Core/shell nanostructured geometries have received a great deal of attention not only in the area of synthesis and characterization but also in their potential applications. These structures have been used in abundance in various areas such as electronics, sensors, catalysis, biomedical, and optical devices. Well-controlled core/shell nanostructured geometries can offer a significant improvement in the devices' performance. Therefore, the fabrication of complex 3D core/shell architectures with controlled morphology, homogeneous …

Nonlinear Characterizing Of A New Titanium Nitride On Aluminum Oxide Metalens, Michael A. Cumming

Theses and Dissertations

A sample metalens generated from Titanium Nitride deposited onto Aluminum Oxide was designed to focus at 10 microns with a beam centered at 800nm, and when analyzed with high intensity illumination was found to have a focal length of 9.650 ±.003µm at an intensity of 16.93[MW/cm² ]. Analyzing this change by comparing it to a Fresnel Lens’ physics shows that for this lens, the effective nonlinear index of refraction is certainly greater than the nonlinear index of just Titanium Nitride itself, at −1.6239 × 10⁻¹⁵[m²/W] compared to the materials −1.3 × 10⁻¹⁵[m^{2 …}

Characterization Of Metal Contacts On Hydrothermally Synthesized Uranium Dioxide For Novel Semiconductor Applications, Tory E. Robinson

Theses and Dissertations

This research is focused on determining which metals or combinations of metals form effective electrical contacts on hydrothermally synthesized UO2 substrates to allow for additional work in characterization of the material as well as the feasibility of its use in semiconductor devices such as solid-state neutron detectors. A methodology was established for selection of candidate metals. Target mixtures composed of Au, Ag, Pt, and Mg were chosen along with several single-metals. Thin metal films were deposited onto tungsten probe tips and hydrothermally synthesized UO2 samples to allow for analysis of mechanical and deposited contact to the substrates through I-V measurements.

3-D Multifunctional Sensors Fabricated On Fiber Tips Using A Two-Photon Polymerization Process, Jonathan W. Smith

Theses and Dissertations

This thesis conducts research involving designing, fabricating, and testing optical fiber tip refractive index sensors. The fabrication process used for these sensors is a two-photon polymerization process utilizing a photo sensitive polymer. Unlike planar lithography, this fabrication process allows the creation of arbitrary shapes with a great degree of freedom. Three different fiber tip sensors were fabricated and tested. The first is a flat surfaced single cavity Fabry-Pérot interferometer (FPI) device, the second is a flat surfaced double cavity FPI device, and the final is a confocal surfaced double cavity FPI device. These sensors are tested for thermal radiation and …