Semiconductor and Optical Materials Commons^™

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Unified Study Of The Classical Hall Effect, Carter J. Reed, Javier E. Hasbun, Wyatt E. Ackerman, L Ajith Desilva

Georgia Journal of Science

Germanium (Ge) samples with different doping types, acceptors (p-type) and donors (n-type), were studied to investigate charge carrier behavior. Carrier concentrations were found to be 1.16×10^21 m^(-3) for the p-type sample and 7.337×10^20 m^(-3) for the n-type sample. These experiments were conducted for the standard Hall effect (Hall voltage versus low magnetic field (B) values) as well as conductivity and Hall voltage versus temperature for different B-fields. The measurements versus temperature at zero-field allow us to obtain band gap ( Eg). While we investigate the conductivities for n-type and p-type doped samples, we also study the conductivity of an undoped …

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah

Makara Journal of Science

Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …

Fabrication Of Microscale Oxide Architectures On Silicon Via A Cmos-Compatible, Deposition-Last Process, Jamal A. Brown

Material Science and Engineering Theses - Archive

This work explores the feasibility of integrating complex oxide devices on silicon using a CMOS-compatible, deposition-last approach. While previous demonstrations of this method have succeeded at larger scales, this study focuses on extending the process to microscale features, with lateral dimensions as small as two microns. The fabrication sequence begins with photolithographic patterning and reactive ion etching of the silicon substrate, followed by the deposition of a silicon nitride mask to delineate device regions. We then epitaxially grew SrTiO3 and La-doped SrTiO3 layers on top of the nitride mask via molecular beam epitaxy. Electrical transport measurements of the La:STO layer …

A Fault-Tolerant Exchange-Coupled Spin-Ensemble Qubit At Elevated-Temperatures, Aniruddha Chakraborty

Theses and Dissertations

This thesis introduces a novel qubit architecture: the ferromagnetic exchange-coupled spin ensemble qubit (E-qubit), designed to address the noise-induced instability. In this work, the time evolution of the ensemble’s density matrix is studied using the Liouville–von Neumann equation. To benchmark against a single-spin qubit, the gate fidelity of an E-qubit is computed in the presence of thermal noise. Coherence time is also analyzed under identical thermal condition and a linear scaling is observed with qubit size . The results show that, at 6 K , the gate fidelity error (0.7 % ) of the seven- spin ensemble is an order …

Investigating The Roles Of Intrinsic Point Defects And Transition Metal Doping In Monolayer And Bulk Tis2, Patrick J. Keeney

UNF Graduate Theses and Dissertations

Within this thesis, the magnetic and electronic properties of various 1T-TiS₂ systems are thoroughly examined using density functional theory (DFT) and scanning tunneling microscopy (STM). Formation energies and electronic implications of intrinsic point defects in bulk TiS₂ and monolayer TiS₂ are analyzed by approximating a computational monolayer of TiS₂ as the surface layer of a bulk sample. This approximation is validated given that intralayer covalent bonding dominates interlayer van der Waals interactions. We conclude that the most energetically favorable intrinsic defects are Ti atoms settling above the outermost S plane and S vacancies. In addition, the …

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

Shorting At Long Duration: Impact Of Extended Discharge Capacity On Battery Solid Electrolytes, Ryan C. Hill, Amanda S. Peretti, Leo J. Small, Erik D. Spoerke, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

Long-duration energy storage (LDES) is critical to a stable, resilient, and decarbonized electric grid. While batteries are emerging as important LDES devices, extended, high-power discharges necessary for cost-competitive LDES present new materials challenges. Focusing on a new generation of low-temperature molten sodium batteries, we explore here unique phenomena related to long-duration discharge through a well-known solid electrolyte, NaSICON. Specifically, molten sodium symmetric cells at 110 ° C were cycled at 0.1 A cm−2 for 1–23 h discharges. Longer discharges led to unstable overpotentials, reduced resistances, and decreased electrolyte strength, caused by massive sodium penetration not observed in shorter duration discharges. …

Machine Learning Prediction Of Photoluminescence In Mos2: Challenges In Data Acquisition And A Solution Via Improved Crystal Synthesis, Ethan Swonger, John Mann, Jared Horstmann, Daniel Yang

Seaver College Research And Scholarly Achievement Symposium

Transition metal dichalcogenides (TMDCs) like molybdenum disulfide (MoS2) possess unique electronic and optical properties, making them promising materials for nanotechnology. Photoluminescence (PL) is a key indicator of MoS2 crystal quality. This study aimed to develop a machine-learning model capable of predicting the peak PL wavelength of single MoS2 crystals based on micrograph analysis. Our limited ability to consistently synthesize high-quality MoS2 crystals hampered our ability to create a large set of training data. The project focus shifted towards improving MoS2 crystal synthesis to generate improved training data. We implemented a novel approach utilizing low-pressure chemical vapor deposition (LPCVD) combined with …

Thermal, Electrical, And Spin Transport: Encompassing Low-Damping Ferromagnets And Antiferromagnetic/Ferromagnetic Heterostructures, Matthew Ryan Natale

Electronic Theses and Dissertations

Continuing technological advancements bring forth escalating challenges in global energy consumption and subsequent power dissipation, posing significant economic and environmental concerns. In response to these difficulties, the fields of thermoelectrics, spintronics, and spincaloritronics emerge as contemporary solutions, each presenting unique advantages. Thermoelectric devices, based on the Seebeck effect, other a passive, carbon-free energy generating solution from waste heat. Although current thermoelectric technology encounters hurdles in achieving optimal efficiencies without intricate designs or complex materials engineering, recently research into low-damping metallic ferromagnetic thin films have provided a new method to enhance spin wave lifetimes, thus contributing to thermoelectric voltage improvements. As …

“Zero” Porosity High Loading Nmc622 Positive Electrodes For Li-Ion Batteries, Haidar Y. Alolaywi, Kubra Uzun, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

LiNi0.6 Mn0.2Co0.2 O 2 (NMC622) is a widely used positive electrode material for lithium-ion batteries, including electric vehicles. In this work, we investigated the effects of porosity, ranging from “zero” to the typical 35%, on the electrochemical behavior of high- loading NMC622 electrodes. Although it is well known that the energy density of the electrode increases with increasing areal capacity and decreasing porosity, NMC-positive electrodes with exceedingly low porosity (e.g., near zero) and high loading (e.g., 4 mAh cm−2 ) have not been investigated. Here, we report an intriguing observation that the “zero porosity” NMC electrode can have higher capacity …

Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov

Theses and Dissertations

This study explores the potential of beryllium (Be) as an alternative dopant to magnesium (Mg) for achieving higher hole concentrations in gallium nitride (GaN). Despite Mg prominence as an acceptor in optoelectronic and high-power devices, its deep acceptor level at 0.22 eV above the valence band limits its effectiveness. By examining Be, this research aims to pave the way to overcoming these limitations and extend the findings to aluminum nitride and aluminum gallium nitride (AlGaN) alloy. Key contributions of this work include. i)Identification of three Be-related luminescence bands in GaN through photoluminescence spectroscopy, improving the understanding needed for further material …

Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev

Theses and Dissertations

Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the Mg_Ga acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …

Breakdown Of The Drift-Diffusion Model For Transverse Spin Transport In A Disordered Pt Film, Kirill D. Belashchenko, Giovanni G. Baez Flores, Wuzhang Fang, Alexey Kovalev, Mark Van Schilfgaarde, Paul M. Haney, Mark D. Stiles

Department of Physics and Astronomy: Faculty Publications

Spin-accumulation and spin-current profiles are calculated for a disordered Pt film subjected to an in-plane electric current within the nonequilibrium Green's function approach. In the bulklike region of the sample, this approach captures the intrinsic spin Hall effect found in other calculations. Near the surfaces, the results reveal qualitative differences with the results of the widely used spin-diffusion model, even when the boundary conditions are modified to try to account for them. One difference is that the effective spin-diffusion length for transverse spin transport is significantly different from its longitudinal counterpart and is instead similar to the mean-free path. This …

Majorana Bound States In A D-Wave Superconductor Planar Josephson Junction, Hamed Vakili, Moaz Ali, Mohamed Elekhtiar, Alexey Kovalev

Department of Physics and Astronomy: Faculty Publications

We study phase-controlled planar Josephson junctions comprising a two-dimensional electron gas with strong spin-orbit coupling and d-wave superconductors, which have an advantage of a high critical temperature. We show that a region between the two superconductors can be tuned into a topological state by the in-plane Zeeman field, and can host Majorana bound states. The phase diagram as a function of the Zeeman field, chemical potential, and the phase difference between superconductors exhibits the appearance of Majorana bound states for a wide range of parameters. We further investigate the behavior of the topological gap and its dependence on the …

Thermal, Magnetic, And Electrical Properties Of Thin Films And Nanostructures: From Magnetic Insulators To Organic Thermoelectrics, Michael J. M. Roos

Electronic Theses and Dissertations

Modern fabrication and growth techniques allow for the development of increasingly smaller and more complex solid state structures, the characterization of which require highly specialized measurement platforms. In this dissertation I present the development of techniques and instrumentation used in magnetic, thermal, and electrical property measurements of thin films and nanostructures. The understanding of trapped-flux induced artifacts in SQUID magnetometry of large paramagnetic substrates allows for the resolution of increasingly small moments. Using these methods, the antiferromagnetic coupling of the interface between a Y₃Fe₅O₁₂ film and Gd₃Ga₅O₁₂substrate is quantitatively …

Fabrication Of Black Phosphorus Terahertz Photoconductive Antennas, Nathan Tanner Sawyers

Physics Undergraduate Honors Theses

Terahertz (THz) photoconductive antennas (PCAs) using 40nm thin-film flakes of black phosphorus (BP) and hexagonal boron nitride (hBN) have been shown computationally to be capable of THz emission comparable to those based on GaAs [2]. In this paper, I briefly describe the scientific and practical interest in THz emissions and explain what warrants research into black phosphorus as a photoconductive semiconductor in THz devices. Furthermore, I outline the basic principle of how these antennas work and mention alternative designs produced by other researchers in the past. Finally, I summarize the fabrication process of these antennas, as well as the measurements …

Description Of Reaction And Vibrational Energetics Of Co2-Nh3interaction Using Quantum Computing Algorithms, Manh Tien Nguyen, Yueh-Lin Lee, Dominic Alfonso, Qing Shao, Yuhua Duan

Markey Cancer Center Faculty Publications

CO2 capture is critical to solving global warming. Amine-based solvents are extensively used to chemically absorb CO2. Thus, it is crucial to study the chemical absorption of CO2 by amine-based solvents to better understand and optimize CO2 capture processes. Here, we use quantum computing algorithms to quantify molecular vibrational energies and reaction pathways between CO2 and a simplified amine-based solvent model—NH3. Molecular vibrational properties are important to understanding kinetics of reactions. However, the molecule size correlates with the strength of anharmonicity effect on vibrational properties, which can be challenging to address using classical computing. Quantum computing can help enhance molecular …

Fabrication And Optical Properties Of Two-Dimensional Transition Metal Dichalcogenides, Manpreet Boora

Dissertations, Master's Theses and Master's Reports

Two-dimensional layered materials such as graphene and transition metal dichalcogenides have gained a lot of attention because of their distinctive chemical, optical, and electronic properties. Transition metal dichalcogenides can have a tunable bandgap in the range of 1 − 3 eV (visible), which enables their applications in ultrathin field effect transistors, photovoltaics, sensors, and optoelectronic devices. They exhibit an indirect-to-direct band gap transition when thinned down from bulk to a single layer. They show strong photoluminescence, electron–photon interaction, valley pseudospin, nonlinear optical response, and lack of dangling bonds. Many exotic phenomena appear when materials are thinned to nanoscale size because …

Two-Dimensional Black Phosphorus For Terahertz Emission And Near-Field Radiative Heat Transfer, Mahmudul Hasan Doha

Graduate Theses and Dissertations

The main focus of this work is to investigate two potential optical and optoelectronic applications of black phosphorus (BP): the near-field radiative heat transfer in plasmonic heterostructures with graphene and terahertz emission from multi-layer BP photoconductive antennas. When the separation distance between graphene-black phosphorene is much smaller than or comparable to the thermal wavelength at different temperatures, a near-field radiation heat transfer breaks the Planck blackbody limit. The magnitude of the near-field radiation enhancement acutely depends on the gate voltage, doping, and vacuum gap of the graphene and BP pair. The strong near-field radiation heat transfer enhancement of the specific …

Nanoengineered Materials For Energy Conversion & Storage Applications: A Density Functional Theory Study, Ahmed Biby

Theses and Dissertations

The conventional approach for the development of novel materials has become long relative to the desired product development cycle. Thus, the sluggish pace of the development of materials within the conventional approach hinders the rapid transformation of the scientific outcomes into useful technological products. To this end, the field of hierarchical materials informatics evolved to bridge this gap. In this field, the multiscale material internal structure is considered the starting point and the core of this approach. This being said, the density functional theory (DFT) was used to generate useful materials data for the advancement of the hierarchical materials data-bases …

Schottky And Poole-Frenkel Conduction Mechanisms In Zron/Sic System, Lusus Vanessa

Student Works (2020-2029)

In this work, the conduction mechanisms of Schottky Emission (SE) and Poole–Frenkel (PF) Emission for the ZrON/SiC system with a temperature range between 400 oC to 900 oC were analyzed. Understanding of the conduction charge mechanisms will help to estimate leakage characteristics of the ZrON/SiC system. Based on the J-E plot measured at different temperatures for 15 minutes, the obtained r2 was ranged between 0.90–0.98, which confirmed the data obtained complied with the standard SE model. Furthermore, the data plotted from the Effective Barrier Height Extracted from the SE plot showed the highest values of

Mid-Ir Optical Refrigeration And Radiation Balanced Lasers, Saeid Rostami

Optical Science and Engineering ETDs

This dissertation reports recent advances in mid-infrared (mid-IR) optical refrigeration and Radiation Balanced Lasers (RBLs). The first demonstration of optical refrigeration in Ho:YLF and Tm:YLF crystals as promising mid-IR laser cooling candidates is reported. Room temperature laser cooling efficiency of Tm- and Ho-doped crystals at different excitation polarization is measured and their external quantum efficiency and background absorption are extracted. Complete characterization of laser cooling samples is obtained via performing detailed low-temperature spectroscopic analysis, and their minimum achievable temperature as well as conditions to achieve laser cooling efficiency enhancement in mid-IR are investigated. By developing a Thulium-doped fiber amplifier, seeded …

Ii-Vi Type-Ii Quantum Dot Superlattices For Novel Applications, Vasilios Deligiannakis

Dissertations, Theses, and Capstone Projects

In this thesis, we discuss the growth procedure and the characterization results obtained for epitaxially grown submonolayer type-II quantum dot superlattices made of II-VI semiconductors. We have investigated the spin dynamics of ZnSe layers with embedded type-II ZnTe quantum dots and the use of (Zn)CdTe/ZnCdSe QDs for intermediate band solar cell (IBSC). Samples with a higher quantum dot density exhibit longer electron spin lifetimes, up to ~1 ns at low temperatures. Tellurium isoelectronic centers, which form in the ZnSe spacer regions as a result of the growth conditions, were also probed. A new growth sequence for type-II (Zn)CdTe/ZnCdSe (QDs) was …

Magnetism In Γ-Fesi2 Nanostructures: A First Principles Study, Sahil Dhoka

Dissertations, Master's Theses and Master's Reports

First-principles calculations are performed on γ-FeSi₂ nanostructures grown on Si (111) and (001) substrate. An attempt to explain the origin of emergent magnetic properties of the metastable gamma phase of iron di-silicide (γ-FeSi₂) is made, which show ferromagnetic behavior on nanoscale, unlike its possible bulk form. Many papers try to explain this magnetism from factors like bulk, epitaxial strain, interface, surface, edges, and corners but doesn’t provide an analytical study for these explanations. Density functional theory is used to analyze the magnetic effects of these factors. The results for the epitaxial structures show no magnetic behavior for …

Synthesis Of Graphene Using Plasma Etching And Atmospheric Pressure Annealing: Process And Sensor Development, Andrew Robert Graves

Graduate Theses, Dissertations, and Problem Reports (ETD)

Having been theorized in 1947, it was not until 2004 that graphene was first isolated. In the years since its isolation, graphene has been the subject of intense, world-wide study due to its incredibly diverse array of useful properties. Even though many billions of dollars have been spent on its development, graphene has yet to break out of the laboratory and penetrate mainstream industrial applications markets. This is because graphene faces a ‘grand challenge.’ Simply put, there is currently no method of manufacturing high-quality graphene on the industrial scale. This grand challenge looms particularly large for electronic applications where the …