Engineering Commons^™

Why I Don't Weld In Computer Labs, Mark Deegan

Level 3

Until very recently, like many people in DIT, I had never even seen a welding laboratory. To listen to me now, you’d swear I was raised with a welding torch in my hand. That’s not the case, but when I moved jobs in September 2015, I discovered that DIT runs evening courses in welding, so I decided to sign up. Way back, when I was in college, the greatest threat to life-and-limb was either an alcoholinduced idiot injury, or at worst, the risk of burning myself with a soldering Iron. They get pretty hot, sometimes as hot as 215°C. That …

Biodegradable Magnesium Alloys For Orthopaedic Applications: A Review On Corrosion, Biocompatibility And Surface Modifications., Sankalp Agarwal, James Curtin, Brendan Duffy, Swarna Jaiswal

Articles

Magnesium (Mg) and its alloys have been extensively explored as potential biodegradable implant materials for orthopaedic applications (e.g. Fracture fixation). However, the rapid corrosion of Mg based alloys in physiological conditions has delayed their introduction for therapeutic applications to date. The present review focuses on corrosion, biocompatibility and surface modifications of biodegradable Mg alloys for orthopaedic applications. Initially, the corrosion behaviour of Mg alloys and the effect of alloying elements on corrosion and biocompatibility is discussed. Furthermore, the influence of polymeric deposit coatings, namely sol-gel, synthetic aliphatic polyesters and natural polymers on corrosion and biological performance of Mg and its …

Bitrate Classification Of Twice-Encoded Audio Using Objective Quality Features, Colm Sloan, Damien Kelly, Naomi Harte, Anil C. Kokaram, Andrew Hines

Conference papers

When a user uploads audio files to a music stream- ing service, these files are subsequently re-encoded to lower bitrates to target different devices, e.g. low bitrate for mobile. To save time and bandwidth uploading files, some users encode their original files using a lossy codec. The metadata for these files cannot always be trusted as users might have encoded their files more than once. Determining the lowest bitrate of the files allows the streaming service to skip the process of encoding the files to bitrates higher than that of the uploaded files, saving on processing and storage space. This …

Mg2+ Differentially Regulates Two Modes Of Mitochondrial Ca2+ Uptake In Isolated Cardiac Mitochondria: Implications For Mitochondrial Ca2+ Sequestration, Christoph A. Blomeyer, Jason Bazil, David F. Stowe, Ranjan K. Dash, Amadou Ks Camara

Biomedical Engineering Faculty Research and Publications

The manner in which mitochondria take up and store Ca²⁺ remains highly debated. Recent experimental and computational evidence has suggested the presence of at least two modes of Ca²⁺ uptake and a complex Ca²⁺ sequestration mechanism in mitochondria. But how Mg²⁺ regulates these different modes of Ca²⁺ uptake as well as mitochondrial Ca²⁺ sequestration is not known. In this study, we investigated two different ways by which mitochondria take up and sequester Ca²⁺ by using two different protocols. Isolated guinea pig cardiac mitochondria were exposed to varying concentrations of CaCl₂ in the …

Evaluating Descriptive Metrics Of The Human Cone Mosaic, Robert F. Cooper, Melissa A. Wilk, Sergey Tarima, Joseph Carroll

Biomedical Engineering Faculty Research and Publications

Purpose: To evaluate how metrics used to describe the cone mosaic change in response to simulated photoreceptor undersampling (i.e., cell loss or misidentification).

Methods: Using an adaptive optics ophthalmoscope, we acquired images of the cone mosaic from the center of fixation to 10° along the temporal, superior, inferior, and nasal meridians in 20 healthy subjects. Regions of interest (n = 1780) were extracted at regular intervals along each meridian. Cone mosaic geometry was assessed using a variety of metrics − density, density recovery profile distance (DRPD), nearest neighbor distance (NND), intercell distance (ICD), farthest neighbor distance (FND), percentage of …

Image-Based Quantification Of 3d Morphology For Bifurcations In The Left Coronary Artery: Application To Stent Design, Laura M. Ellwein, David S. Marks, Raymond Q. Migrino, Dennis Foley, Sara Sherman, John F. Ladisa Jr.

Biomedical Engineering Faculty Research and Publications

Background

Improved strategies for stent‐based treatment of coronary artery disease at bifurcations require a greater understanding of artery morphology.

Objective

We developed a workflow to quantify morphology in the left main coronary (LMCA), left anterior descending (LAD), and left circumflex (LCX) artery bifurcations.

Methods

Computational models of each bifurcation were created for 55 patients using computed tomography images in 3D segmentation software. Metrics including cross‐sectional area, length, eccentricity, taper, curvature, planarity, branching law parameters, and bifurcation angles were assessed using open‐sources software and custom applications. Geometric characterization was performed by comparison of means, correlation, and linear discriminant analysis (LDA).

Results …

Prosthetic Leg Kit For Deployment In Developing Countries, Brian Murphy, Dominique Porcincula, Derek Morgan, Kendall Ruggles, Christian Aguayo

Biomedical Engineering

The World Health Organization estimates that over 30 million people require some sort of prosthetic technology. However, traditional prosthetic fitting practices take a lot of time and cost a lot of money, making them inaccessible to millions of people around the world. StandUP Worldwide is an interdisciplinary project team devoted to creating low-cost prosthetic technologies for use around the world, especially in resource poor areas. They are currently developing a low cost, below-the-knee prosthetic kit that can be easily deployed in a resource-poor area. The following presents their solution for a below-the-knee prosthetic socket, foot, and leg.

Comparison Of Energy Analysis Platforms For Title 24compliance, Holli L. Tripp

Construction Management

The 2013 Building Energy Efficiency Standards for Low-Rise Residential Buildings allow users to demonstrate compliance via two methods: performance or prescriptive. Prescriptive documentation requires analysis to be conducted by-hand while performance compliance utilizes computer modeling software to analyze trade-offs, and demonstrate compliance through alternative building design parameters. Typically computer demonstrated compliance via the performance method is the most popular choice because it allows for complex buildings to be analyzed using their actual metrics which results in a more accurate report of proposed energy consumption (Ross, 2016). This method however requires additional software outside of the tools that architects and designers …

Carbon Fiber Reinforced Polymer Roofing At Ac2 Auditorium: A Case Study, Jacob R. Hague

Construction Management

Carbon Fiber Reinforced Polymer (CFRP) has been used in several capacities in the manufacturing of products such as high performance cars and airplanes, as well as many other smaller products. In construction, it has primarily been used as a way to strengthen or repair existing structures, and in some more recent applications, in tension cables. This paper will examine a new way to use CFRP- as a roofing material, and will specifically focus on the design and installation of a CFRP roof installed at Apple’s new AC2 Auditorium, forming the roof for the main entrance lobby. Installed in February of …

Integrating Bim To The Construction Industry: The Hardships, Benefits, And An Unyielding Educational Gap Between Technology And Field Application, Torrie Peth

Construction Management

In recent years, Building Information Modeling has taken the construction industry by storm and revolutionized the construction process entirely. It allows for trades to coordinate more efficiently and effectively, while providing a hands-on, 3D overview of a structure being built. Certain characteristics are more easily adoptable by existing companies than others, but there are vast "fallacies of hype" in the concept. This study will examine the effects as BIM, positive and negative, and its current usage in industry. In addition it will identify the gap developing between students exiting the university setting that has a strong emphasis on technological integration, …

Roborodentia Robot (Amazon Prime), Alec Cheung

Computer Science and Software Engineering

Roborodentia is an annual autonomous robotics competition sponsored and hosted by Cal Poly. In the 2016 competition, participants are to design a robot that scores the most points by gathering rings from marked supply pegs and placing them onto marked scoring pegs. For Roborodentia I designed, constructed, and programmed a robot, named Amazon Prime, to compete.

Senior Project: Control System For An Underwater Remotely Operated Vehicle, Tyler Mau, Joseph Mahoney

Computer Engineering

No abstract provided.

Slo Dancing, Ryan Moelter, Audrey Bruscia, Matthew Smith

Computer Engineering

No abstract provided.

Car Safe, David Van Workum

Electrical Engineering

The Car Safe project helps protect parents and caretakers from the dangers associated with leaving children in hot vehicles. The device supports parents through notifying them of the child’s wellbeing and status while within an automobile. Specifically, the device monitors the child’s ergonomic experience and the spatial proximity between the caretaker and child. Car Safe utilizes this information and determines if the child finds himself in a dangerous environment. Due to its compact design, the device functions independently of a specific car seat design, allowing customers to integrate Car Safe in the car seat environment of their choosing.

Evaluating The Cost Efficiency Of Modular Construction, Deborah R. Rampoldi

Construction Management

The use of modular construction techniques, also referred to as prefabricated or off-site construction, has been suggested as a practical method for reducing construction costs. However, quantifying these potential cost reductions and identifying the cost items most affected by modular delivery remain significant challenges. This study evaluates the financial effectiveness of 3D volumetric modular construction in which fully fitted modules are manufactured in a factory and assembled onsite. The study aims to identify the primary cost savings and cost increases associated with off-site construction and to support more informed contractor decision-making during project planning and preconstruction. Data was collected through …

Grain Orientation Effects On The Rotating-Bending Fatigue Properties Of Forged 7050-T7452 Aluminum Alloy, Matt Cristler, Jonas Zhang

Materials Engineering

In order to investigate the effects of grain orientation on the high cycle fatigue properties of 7050-T7452 aerospace grade aluminum, rotating-bending fatigue tests were performed on longitudinal (LG) and short transverse (ST) specimens taken from two sample sets (Method A and Method B) of open die forged 7050 aluminum. The fatigue specimens were machined to a 0.2" gage diameter and 4" length and subsequently hand polished to a mirror finish to minimize potential crack initiation sites. The tests were conducted on a Fatigue Dynamics RBF-300 HT tester in the fully reversed loading condition, with stress levels varying from 20 ksi …

Manufacturing And Characterization Of Poly (Lactic Acid)/Carbon Black Conductive Composites For Fdm Feedstock: An Exploratory Study, Dylan Fitz-Gerald, Justin Boothe

Materials Engineering

This exploratory study developed methods of manufacturing and characterizing the electrical properties of small batches of conductive composite feedstock for the Fused Deposition Modeling (FDM) manufacturing process, commonly known as 3D printing. We utilized a solution casting process of Poly(lactic acid) (PLA) (Grade 4043D, NatureWorks, LLC.) and Carbon Black (CB) (Vulcan® XC72, Cabot Corp.) in chloroform. The resulting composite precursor was cryogenically treated with liquid nitrogen and milled in a coffee grinder in order to achieve particles that could be fed into the extruder. Composite precursors were dried in a vacuum oven at an elevated temperature of 38°C. Filaments were …

Ultra-Light Bear Canister, Naveen Beasley, Eli Rogers, Cory Wilson, Donald Wood

Mechanical Engineering

A bear canister is the primary tool used by outdoor enthusiasts to protect their food from bears while camping or backpacking. There are many effective products currently on the market, however many are not designed with reduced weight in mind. Hardcore backpackers want to have the lightest gear possible to ease the strain of carrying a large pack for sometimes weeks at a time.

Current bear canisters exist that utilize carbon fiber for weight reduction, however they rely on stock carbon tubes and lack engineering analysis, and no competitor has a fully composite bear canister available. Our sponsor, Nick Hellewell, …

Universal Weight Machine, Oscar Andrade, Bibiana Koch, Robert Molloy, Haley Rentfro, Emily Woods

Mechanical Engineering

The purpose of this project is to design and build an inexpensive, universally accessible multi-station exercise machine for the physical and mental well-being of athletes of the Special Olympics and Pathpoint Life Education & Advancement Program. The machine has three sides tiered to higher resistance: the first station offers a minimal resistance aerobic exercise focused on moving the arms with an ergometer, the second station provides numerous locations to latch on resistance bands that will build strength in the athlete’s arms and chest, and the final station has a donated weight machine that offers lat pulldowns and flys with maximum …

Automated Pintail Machine, Stephen Etheredge, Andrew Evans, Michael Fernicola

Mechanical Engineering

No abstract provided.

High­Impact Textile Joining For Uav Landing Application: Tensile Testing Of Textiles, Patrick Michniuk, Matthew Ferretti, Jennifer Ford

Mechanical Engineering

The main objective of this project is to improve upon the current stitching pattern used in UAV catch net applications with the intention of lengthening their useable life cycle. To achieve this, a testing setup and procedure has been developed to produce material strength and stiffness data for nylon­ webbing strap, and for sewn intersections of the same strap material. The current stitching pattern was tested, and quantitatively characterized based on strength and stiffness. New stitching designs were generated and tested using the same procedure, and the results compared. This allowed for the selection of the most optimized stitching pattern …

Flow Meter Test Rig, Cory Davis, Emily Guss, Michael Swartz

Mechanical Engineering

As part of a fluid mechanics laboratory, there should be an experiment that demonstrates the proper use of flow meters, devices that are necessary and relevant in many fluids-related industries. In order to provide students with exposure to these types of devices and how they work, a test rig was developed with the ability to interchange a variety of flow meters in order to broaden the students’ knowledge of the different types of measuring devices. This report was also written to outline the steps taken to ensure the test rig would match a laboratory and industry setting. Additionally, it was …

Designing And Comparing Multiple Portfolios Of Parameter Configurations For Online Algorithm Selection, Aldy Gunawan, Hoong Chuin Lau, Mustafa Misir

Research Collection School Of Computing and Information Systems

Algorithm portfolios seek to determine an effective set of algorithms that can be used within an algorithm selection framework to solve problems. A limited number of these portfolio studies focus on generating different versions of a target algorithm using different parameter configurations. In this paper, we employ a Design of Experiments (DOE) approach to determine a promising range of values for each parameter of an algorithm. These ranges are further processed to determine a portfolio of parameter configurations, which would be used within two online Algorithm Selection approaches for solving different instances of a given combinatorial optimization problem effectively. We …

Strategic Planning For Setting Up Base Stations In Emergency Medical Systems, Supriyo Ghosh, Pradeep Varakantham

Research Collection School Of Computing and Information Systems

Emergency Medical Systems (EMSs) are an important component of public health-care services. Improving infrastructure for EMS and specifically the construction of base stations at the ”right” locations to reduce response times is the main focus of this paper. This is a computationally challenging task because of the: (a) exponentially large action space arising from having to consider combinations of potential base locations, which themselves can be significant; and (b) direct impact on the performance of the ambulance allocation problem, where we decide allocation of ambulances to bases. We present an incremental greedy approach to discover the placement of bases that …

Dual Formulations For Optimizing Dec-Pomdp Controllers, Akshat Kumar, Hala Mostafa, Shlomo Zilberstein

Research Collection School Of Computing and Information Systems

Decentralized POMDP is an expressive model for multi-agent planning. Finite-state controllers (FSCs)---often used to represent policies for infinite-horizon problems---offer a compact, simple-to-execute policy representation. We exploit novel connections between optimizing decentralized FSCs and the dual linear program for MDPs. Consequently, we describe a dual mixed integer linear program (MIP) for optimizing deterministic FSCs. We exploit the Dec-POMDP structure to devise a compact MIP and formulate constraints that result in policies executable in partially-observable decentralized settings. We show analytically that the dual formulation can also be exploited within the expectation maximization (EM) framework to optimize stochastic FSCs. The resulting EM algorithm …

Self-Organizing Neural Network For Adaptive Operator Selection In Evolutionary Search, Teck Hou Teng, Stephanus Daniel Handoko, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Evolutionary Algorithm is a well-known meta-heuristics paradigm capable of providing high-quality solutions to computationally hard problems. As with the other meta-heuristics, its performance is often attributed to appropriate design choices such as the choice of crossover operators and some other parameters. In this chapter, we propose a continuous state Markov Decision Process model to select crossover operators based on the states during evolutionary search. We propose to find the operator selection policy efficiently using a self-organizing neural network, which is trained offline using randomly selected training samples. The trained neural network is then verified on test instances not used for …

Demo: Ta$Ker: Campus-Scale Mobile Crowd-Tasking Platform, Nikita Jaiman, Thivya Kandappu, Randy Tandriansyah, Archan Misra

Research Collection School Of Computing and Information Systems

We design and develop TA$Ker, a real-world mobile crowd- sourcing platform to empirically study the worker responses to various task recommendation and selection strategies.

Poster: Improving Communication And Communicability With Smarter Use Of Text-Based Messages On Mobile And Wearable Devices, Kenny T. W. Choo

Research Collection School Of Computing and Information Systems

While smartphones have undoubtedly afforded many modern conveniences such as emails, instant messaging or web search, the notifications from smartphones conversely impact our lives through a deluge of information, or stress arising from expectations that we should turn our immediate attention to them (e.g., work emails). In my latest research, we find that the glanceability of smartwatches may provide an opportunity to reduce the perceived disruption from mobile notifications. Text is a common medium for communication in smart devices, the application of natural language processing on text, together with the physical affordances of smartwatches, present exciting opportunities for research to …

Poster: Air Quality Friendly Route Recommendation System, Savina Singla, Divya Bansal, Archan Misra

Research Collection School Of Computing and Information Systems

To model the overall personal inhalation of hazardous gases through the air (both indoor and outdoor) by an individual, provide air quality friendly route recommendations, thus raising the overall quality of urban movement and living healthy life.

Google Flu Trends Spatial Variability Validated Against Emergency Department Influenza-Related Visits, Joseph Jeffrey Klembczyk, Mehdi Jalalpour, Scott Levin, Raynard E. Washington, Jesse M. Pines, Richard E. Rothman, Andrea Freyer Dugas

Civil and Environmental Engineering Faculty Publications

Background: Influenza is a deadly and costly public health problem. Variations in its seasonal patterns cause dangerous surges in emergency department (ED) patient volume. Google Flu Trends (GFT) can provide faster influenza surveillance information than traditional CDC methods, potentially leading to improved public health preparedness. GFT has been found to correlate well with reported influenza and to improve influenza prediction models. However, previous validation studies have focused on isolated clinical locations.

Objective: The purpose of the study was to measure GFT surveillance effectiveness by correlating GFT with influenza-related ED visits in 19 US cities across seven influenza seasons, and to …