Engineering Commons^™

Performance Augmentation Of Single-Slope Solar Distiller Using An Evacuated Tube Solar Collector: Theoretical Study, Eman Mohammed Abuelezz Eng., Yasser El-Samadony Prof., Khaled Khodary Esmaeil Assoc. Prof., Mohamed Elsheshtawy Zayed Dr.

Journal of Engineering Research

In this research, the performance analysis of a solar-powered desalination system incorporating a single slope-slope solar still and an evacuated tube solar collector is theoretically investigated. The system comprises a solar evacuated tube that absorbs solar radiation, transferring heat to saline water. This water then flows into a solar still, where it absorbs solar energy, boosting the evaporation rate. Two solar distillers, namely the conventional solar distiller (Still-I) and solar still integrated with evacuated tube solar collector (Still-II), are simulated and analyzed under identical outdoor conditions in Tanta, Egypt. A comprehensive theoretical model, developed using FORTAN programming, simulates the performance …

Numerical Analysis Of Flow Fields For The Different Models Of The Shrouded Savonius Rotor, Alsaied Khalil Mahmoud, Mohamed Mahgoub Bassuoni, Mohamed Fawzy Obiaa, Ahmed Mostafa Khaira

Journal of Engineering Research

In this study, the effect of three different lengths (short, medium, and long) of flanged shrouded Savonius wind turbines is investigated three-dimensional (3-D) numerically by ANSYS-FLUENT. The 3-D numerical model of a simple rotor is validated by comparing the results with previous published experimental ones at the same operating conditions and geometry. The numerical and experimental results indicate a good agreement with each other when using the SST K-ω model with a time step size of 0.0025 s.The analysis of the numerical results of the three flanged shrouded models shows an enhancement of the torque coefficient at tip speed ratio …

Modeling Thermosyphon And Heat Pipe Performance For Mold Cooling Applications, Dwaipayan Sarkar

Electronic Thesis and Dissertation Repository

Thermosyphons are enhanced heat transfer devices that can continuously transfer very large amounts of heat rapidly over long distances with small temperature differences. The high heat transfer rate is achieved through simultaneous boiling and condensation of the working fluid and the continuous heat transfer is achieved through recirculation of the working fluid in its liquid and vapor phase. A potentially important application of the thermosyphons has been towards reducing the cycle times of the mold cooling processes which would provide economic incentives to the automotive industry.

Different operational and geometrical parameters such as the input heating power, fill ratio (FR), …

Enhancing The Performance Of Conventional Solar Still Using The Nano-Doped Paint (Ndp) Coating, Hagar Alm-Eldin Bastawissi Prof.Dr, Nermin Elgendy Engineer, Ayman R. El-Tohamy

Journal of Engineering Research

Nations are throughout the entire globe continuously confronting the problem of potable water shortage. Recently, it has been thought that using solar energy to desalinate brackish water offers a practical answer to the world's water crises. The output of these stills, is meager, and academics haven't done much to boost it in any way. Solar distillers have been proposed as an efficient method to produce potable water. In recent years, saltwater has produced drinking water by various ways. The efficiency of a solar distiller is significantly influenced by various factors, most important factor of them is the absorber surface. In …

Numerical Study Of The Effect Of Long Shroud Diffuser With And Without Plate Obstacle On The Performance Of Savonius Wind Turbine, Alsaied Khalil Mahmoud, Mohamed Mahgoub Bassuoni, Mohamed Fawzy Obiaa, Ahmed Mostafa Khaira

Journal of Engineering Research

This study presents the three-dimensional (3-D) numerical analysis of the influence of the plate obstacle installed at the entrance of the long flanged diffuser on the simple Savonius rotor performance by ANSYS 2022 R1. In the beginning, the 3-D numerical model is validated using the sst k-ω turbulence model with the previous published experimental results at the same conditions, and they are in good agreement with each other. The numerical results indicate the remarkable enhancement of the rotor performance at a tip speed ratio of 0 to 0.7 by using a flanged diffuser with a plate obstacle. The shrouded diffuser …

Data Driven And Machine Learning Based Modeling And Predictive Control Of Combustion At Reactivity Controlled Compression Ignition Engines, Behrouz Khoshbakht Irdmousa

Dissertations, Master's Theses and Master's Reports

Reactivity Controlled Compression Ignition (RCCI) engines operates has capacity to provide higher thermal efficiency, lower particular matter (PM), and lower oxides of nitrogen (NOx) emissions compared to conventional diesel combustion (CDC) operation. Achieving these benefits is difficult since real-time optimal control of RCCI engines is challenging during transient operation. To overcome these challenges, data-driven machine learning based control-oriented models are developed in this study. These models are developed based on Linear Parameter-Varying (LPV) modeling approach and input-output based Kernelized Canonical Correlation Analysis (KCCA) approach. The developed dynamic models are used to predict combustion timing (CA50), indicated mean effective pressure (IMEP), …

Depressurization Characteristics Of Steam-Based Reciprocating Vacuum Pump, Hongling Deng

Dissertations

This dissertation introduces a novel vacuum technology that leverages low-pressure saturated steam and cooling-controlled condensation, offering an efficient way to utilize low-grade thermal energy sources like waste heat, steam, or solar energy. At the heart of this technology is a unique duo-chamber vacuum pump system, featuring a reciprocating piston and a heat-conductive wall, designed to generate a vacuum through steam-condensation and cooling processes.

The core of this research lies in developing and validating mechanistic models for the steam-condensation depressurization process, a complex phenomenon involving phase change and transport mechanisms. Prior to this work, these mechanisms were not sufficiently modeled or …

Investigation Of Thermofluid Processes In A Pcm Based Thermal Storage Module, Luca M. Crnjac

Electronic Thesis and Dissertation Repository

Latent heat thermal energy storage systems can capture and store solar thermal energy, enhancing the reliability of solar energy by facilitating a continuous and consistent energy supply. However, phase change materials used in these systems suffer from low thermal conductivities making it difficult to achieve suitable charging and discharging rates. The present research investigated this issue using computational and experimental approaches to improve the design of a thermal storage module through heat transfer enhancement. Various heat transfer enhancements including a finned honeycomb structure, and metal wool were incorporated into a thermal storage module to analyze their effect on charging and …

Effects Of Back Reflectors And Thin Metal Covers On The Performance Of Near-Field Thermophotovoltaic Devices, Mehran Habibzadeh

Electronic Theses and Dissertations

Highly efficient energy harvesting devices that can recover a large amount of waste energy are of significant interest. Thermophotovoltaics (TPVs) are solid-state devices that can convert thermal energy radiated by a heated emitter into electrical power through the process of photovoltaic effect. In a TPV system, heat is converted to electricity by using a high-temperature emitter to radiate photons, which are then absorbed by a photovoltaic (PV) cell, generating electron-hole pairs and producing electrical power.

TPV devices have the advantages of producing High efficiency and being lightweight with low maintenance cost and zero pollution. However, these devices have not been …

Effect Of A Geothermal Heat Pump System On Cooling Residential Buildings In A Hot, Dry Climate, Rania Rushdy Moussa, Ayman H. Mahmoud

Architectural Engineering

ABSTRACT In the last century, electricity demand has doubled due to urban expansion, which has contributed to the formation of more urban heat islands (UHI) and the appearance of environmental hazards such as the global climate change phenomenon. Since residential buildings are considered the main electricity consumer sector in Egypt, they consume up to 42% of total energy consumption, which contributes to increasing temperatures and constitutes UHI in cities. In this context, the research aims to examine the effectiveness of using the closed vertical loop geothermal system (GSHPCV) for cooling residential buildings in a hot, dry climate, such as Cairo, …

Dynamics Modeling Of Molten Salt Reactors, Visura Umesh Pathirana

Doctoral Dissertations

The abundance of energy is a necessity for the prosperity of humans. The rise in energy demand has created energy shortages and issues related to energy security. Nuclear energy can produce vast amounts of reliable energy without many of the negative externalities associated with other competing energy sources, such as coal and natural gas. As a result, public interest in nuclear power has increased in the past decade. Many new types of nuclear reactor are proposed. These nuclear reactor designs feature many passive technologies that can operate without external influence. Reactors that feature advanced passive safety features are catagorized as …

Additively Manufactured Nature Inspired Morphology For Redesign: Advancing Next Generation Energy Systems, Vanshika Singh

Doctoral Dissertations

To meet cleaner energy goals and increasing demand, energy systems such as gas turbines and power plants are required to be operated under harsh loading conditions like higher temperatures and pressures, fluctuating loads, and corrosive environments. Advanced manufacturing techniques such as additive manufacturing (AM) have put us on the trajectory for next-generation system designs, allowing complex geometries and high-temperature alloys with tailored material properties. We need new and systematic design philosophies to use AM's unique characteristics prudently. For a given functionality, nature tends to provide similar solutions in animate and inanimate structures. We propose to take inspiration from nature's repetitive …

An Investigation Into Computational Modelling Of Melting And Solidification Of Phase Change Materials, Maryam Hemmat

Electronic Thesis and Dissertation Repository

This thesis evaluates the effectiveness of the enthalpy-porosity approach in simulating melting and solidification of phase change materials within latent heat thermal energy storage systems. It systematically investigates the sensitivity of the computational model to four adjustable parameters: mushy zone coefficient, thermal expansion coefficient, solidus/liquidus temperatures, and latent heat. The study includes individual and combined analyses of these factors in simulations of the melting process by comparing outcomes with extensive experimental data, resulting in a calibrated melting model. The calibrated model is validated across various heating conditions in the cylindrical cavity, and then in a rectangular cavity, confirming its reliability …

Onshore Power For The Docked Container Vessels In Apapa Port Through Blended Finance, Oladayo Matthew Atilola

World Maritime University Dissertations

No abstract provided.

Potential Roles Of Vessel Traffic Services (Vts) In Maritime Decarbonization, Suleiman Mustapha Bunza

World Maritime University Dissertations

No abstract provided.

Application Of Wind Propulsion In The Existing Fleet Of The Caspian Sea Using Real Wind Data, Mahmud Suleymanli

World Maritime University Dissertations

No abstract provided.

Analysis Of The Pros And Cons Of The Acquisition Of Training Ships By Metis, Jeremiah Yaw Frimpong

World Maritime University Dissertations

No abstract provided.

Exploring The Role Of Education In Addressing The Skills Gap For Seafarers In Bangladesh's Maritime Industry, Fatema Tuz Tahera

World Maritime University Dissertations

No abstract provided.

Design And Characterization Of A High Pressure Flow Loop For Heat Transfer Experiments Of Supercritical Carbon Dioxide, Joseph Sauerbrun

Doctoral Dissertations and Master's Theses

Supercritical carbon dioxide (sCO2) sees heightened heat transfer characteristics near its critical point due to its drastically changing thermophysical properties. Conventional single phase heat transfer theory was not developed to capture this nonlinear variation in properties and cannot predict the heat transfer characteristics of sCO2 to a practical level useful for design. To delve deeper into the behavior near the critical point and shed light on this crucial phenomenon, a state-of-the-art closed flow loop was developed. This setup enabled convective heat transfer experiments of sCO2 under diverse boundary conditions and test section geometries. Key components of the loop include the …

Investigation Of Solar Assisted Water Heating System Integrated With Pcm Storage Tank, Sohrab Saadat Pour

Major Papers

This study discusses the importance of integrating renewable energy sources, particularly Solar Water Heating Systems (SWHSs) with Thermal Energy Storage (TES) technology, to address the growing energy consumption in residential buildings, aligning with the United Nations' Sustainable Development 2030 agenda. The combination of SWHSs and TES helps reduce building energy consumption by storing excess solar energy, which can be used for Domestic Hot Water (DHW) needs during peak periods and nighttime. The study proposes a dynamic model using TRNSYS software to simulate a SWHS over a 30-hour period in a residential apartment. Additionally, a novel MATLAB component simulates an encapsulated …

Sustainability Matchmaking: Exploration Into Using Excess Renewable Energy To Deliver ‘Free’ Energy To Fuel Poor Homes – A Preliminary Case Study In Ireland, Ciara Ahern, Ronan Oliver

Articles

The aggregated fuel cost of domestic hot water (DHW) generation in Ireland, in 2022, was €529M with associated emissions/load of 1.3MtCO₂/289GWh. The shadow price of carbon monetises the negative impact of emissions, rising with time; DHW generation has an associated shadow carbon cost of €13M in 2022, rising to €42M in 2030 and €335M in 2050.

In 2020, c12%/€441M of wind was curtailed or wasted as inter alia, there was no demand at times of high wind. Meanwhile, a ‘silent crisis’ is occurring in Ireland wherein one-in-two dwellings were considered in fuel poverty in 2022. Households in …

Improving Energy Efficiency Of School Buildings With Solar-Assisted Cooling For The Maldives, Ahmed Fathhee

Masters Theses

Anthropogenic activities are responsible for the impact of global climate change because of burning fossil fuels releasing harmful gases into the environment. As a result, the global temperature has risen about 1.18 °C since 1880, causing the global sea level to rise by 178 mm over the past century. This is a threat to countries that are closer to the ocean, especially the low-lying countries such as the Maldives. It is predicted if the sea level keeps rising, most of these islands could be below sea level by 2030.

The Maldives has a tropical climate requiring cooling to achieve thermal …

Heat Pump Integrated Thermal Storage For Building Demand Response And Decarbonization, Sara Sultan

Doctoral Dissertations

This work presents a novel thermal energy storage (TES) integrated with existing residential heat pump (HP). The research focuses on controls and configuration for energy, demand, cost and carbon emissions savings for residential buildings’ energy consumption. This work will be significant in developing a framework especially for reduced energy demand and carbon emissions associated with space heating and cooling in residential buildings. Since buildings account for about 40% primary energy consumption in U.S. and half of that is associated with HP.

An existing air source HP in integrated with a phase change material (PCM) based TES via active configuration where …

Transient Thermal Performance Enhancement Of Phase Change Materials Through Novel Pin Arrangements Under Varied Gravity Conditions, Junaid Khan

Masters Theses

This thesis presents a comprehensive examination of encapsulation techniques and performance enhancement strategies for Phase Change Materials (PCMs) in the thermal management of spacecraft avionics. This research contributes to optimizing PCM applications in spacecraft through historical analysis, transient thermal performance enhancement, and computational studies.

The first chapter explains the significance of PCMs in passive thermal management since the beginning of space-age technology, it underlines the low thermal conductivity of PCMs and the necessity of incorporating materials with high thermal conductivity, such as metal foams, to improve heat transfer. It also discusses various advancements in PCM research for spacecraft thermal management …

Aeroponic System Optimization For Butterhead Lettuce Growth And Future Sustainability Using Flow Blurring Atomization, Taylor J. Johnson

Doctoral Dissertations and Master's Theses

The global population has grown by 6 billion people over the last century and is trending toward 9.7 billion people by the year 2050. Agriculture accounts for 70% of global fresh water usage. Technology must be developed to accommodate the increase of food production demanded by the growing global population and the subsequent increase in water usage. Aeroponic technology is a water-efficient vertical farming technology that can reduce water usage by 90% by suspending plant roots in air within a controlled chamber and supplying atomized droplets of a water-nutrient solution directly to the roots.

This study simultaneously tests six droplet …

Addressing Low Heat Pump Heating System Sales In The Uk, Ben Costelloe

Articles

The replacement of existing fossil fuel boilers with heat pumps is seen as a key measure in the decarbonisation of heating systems and addressing climate change. This policy however, is currently failing in many Western European states, particularly in the UK. The many reasons for this situation are examined. However, the age of UK housing stock and particularly the high number of dwellings built prior to the introduction of building insulation regulations in 1980, are key. To maintain the running cost of air source heat pumps competitive with those of the gas boilers they generally replace the heat pump lift …

A High-Speed Portable Ground Heat Exchanger Model For Use In Various Energy Simulation Software, Ryan Davies, Matt Mitchell, Edwin Lee

Macalester Journal of Physics and Astronomy

A portable component model (PCM) of a ground source heat pump system was developed and used as a test case in the creating of a PCM development framework. By developing this framework, new building energy simulation models will be able to be easily integrated into existing simulation software such as EnergyPlus and the Modelica Buildings Library. Our model uses a time responsive g-function and numerical methods to simulate ground source heat pumps for single time steps as well as long time scales. We validated our model against GHESim and GLHEPro and found that our model agrees with these two standards …

Rapid Composter, Shannon Shinozaki, Avin Atencio, Jonathan Fraser, Lukas Kolbl, Russell Occhipinti

Mechanical Engineering

This project was created with the intent of automatically composting equine bio waste to be reused as plant fertilizer. The system consists of four subsystems: power generation and storage, automatic controls, aeration, and structure. Each subsystem may be manufactured independently, then put together. This system will not have access to power outlets, so it was designed to be solar-powered.

The Modernization Of Large Power Transformer Tanks, Babajide O. Williams

Electronic Theses and Dissertations

Due to the current demands placed on the power grid in terms of climate change, increasing urbanization, and terrorist attacks, the U.S. government in response to these demands, mandated that all the grid components be modernized in order to increase their reliability. As a critical component of the grid, Large Power Transformers (LPTs) play a key role in ensuring sustainable power generation and distribution. A literature search performed in this work and the analysis of data retrieved from the search showed that the tanks of these LPTs are critical to their durability, longevity, and reliability. Therefore, the reliability of LPTs …

Power Thyristor Controller For Speed Control Of Dc Motor, Alejandra Zapata, Morgan Erich Boehme, Abdullah Mohammed Awidah, Payton Robert Chalstrom

Electrical Engineering

In this work, a Power Thyristor Controller for Speed Control of DC Motor has been developed with the purpose of replacing an existing simulation experiment, aiming to effectively implement the principle of learning by doing. The primary objective of the experiment setup is to illustrate the fundamental principles and operational mechanisms underlying the firing angle and controlled bridge rectifier. The new experiment is taking advantage of the existing FCRO4100 Single Phase Firing Board that was donated to the University by ENERPRO. The pre-programmed microcontroller is connected to the thyristor bridge rectifier that’s powered by 24VAC. Additionally, a DC motor will …