Engineering Commons^™

Hall Effect Modeling In Fem Simulators And Comparison To Experimental Results In Silicon And Printed Sensors, Leonardo A. Frem

Master's Theses

Finite element method simulation models for thin-film semiconductor-based Hall sensors were developed using secondary data in order to understand their behavior under strong magnetic fields. Given a device geometry and charge carrier density and mobility, the models accurately calculated sensor resistance, Hall voltage under a normally-incident constant magnetic field, and expected offset from a population of Hall devices. The model was successfully matched against data from integrated chip Hall sensors from St. Jude Medical. Additionally, the feasibility of creating Hall effect devices with common carbon ink was explored experimentally. The material properties obtained from testing these ink-based devices through the …

Low-Frequency Series Loaded Resonant Inverter Characterization, Alfredo Medina

Master's Theses

Modern power systems require multiple conversions between DC and AC to deliver power from renewable energy sources. Recent growth in DC loads result in increased system costs and reduced efficiency, due to redundant conversions. Advances in DC microgrid systems demonstrate superior performance by reducing conversion stages. The literature reveals practical DC microgrid systems composed of wind and solar power to replace existing fossil fuel technologies for residential consumers. Although higher efficiencies are achieved, some household appliances require AC power; thus, the need for highly efficient DC to AC converters is imperative in establishing DC microgrid systems. Resonant inverter topologies exhibit …

The Bottlefly Ios Application For Wine Recommendations, Carson James Carroll

Master's Theses

The use of smartphone applications has taken over the way people interact with the world. The design of an application has become an important aspect in keeping the user engaged [22]. People are looking for applications that are easy to use and will get the job done. This thesis focuses on the design of a mobile application for iOS that recommends wine in various retail locations that match a user’s taste preferences.

The goals of this thesis are to design an iOS application that recommends wine to consumers, improve upon the wine recommendation algorithms by acquiring more customer data, and …

Design And Testing Of A Top Mask Projection Ceramic Stereolithography System For Ceramic Part Manufacturing, Dylan Robert De Caussin

Master's Theses

Ceramic manufacturing is an expensive process with long lead times between

the initial design and final manufactured part. This limits the use of ceramic as a viable material unless there is a large project budget or high production volume associated with the part. Ceramic stereolithography is an alternative to producing low cost parts through the mixing of a photo curable resin and ceramic particles. This is an additive manufacturing process in which each layer is built upon the previous to produce a green body that can be sintered for a fully dense ceramic part.

This thesis introduces a new approach …

The Effects Of Obesity On Resultant Knee Joint Loads For Gait And Cycling, Juan Gutierrez-Franco

Master's Theses

Osteoarthritis (OA) is a degenerative disease of cartilage and bone tissue and the most common form of arthritis, accounting for US$ 10.5 billion in hospital charges in 2006. Obesity (OB) has been linked to increased risk of developing knee OA due to increased knee joint loads and varus-valgus misalignment. Walking is recommended as a weight-loss activity but it may increase risk of knee OA as OB gait increases knee loads. Cycling has been proposed as an alternative weight-loss measure, however, lack of studies comparing normal weight (NW) and OB subjects in cycling and gait hinder identification of exercises that may …

Characterizing Neurotransmitter Receptor Activation With A Perturbation Based Decomposition Method, Stephen Gregory Jue

Master's Theses

The characterization of postsynaptic potentials, in terms of neurotransmitter receptor activation, is of clinical significance because information associated with receptor activation can be used in the diagnosis and study of neurological disorders. Single-unit recordings provide a method of measuring postsynaptic potentials in neurons using a microelectrode system, but yield no detailed information regarding the neurotransmitter receptors that contribute to the potential. To determine the types of neurotransmitter receptors that result in a compound postsynaptic potential from a microelectrode reading, decomposition of the potential is necessary. In this work, a perturbation-based decomposition method developed by R. Szlavik is evaluated for this …

Analysis Of Various Algorithmic Approaches To Software-Based 1200 Baud Audio Frequency Shift Keying Demodulation For Aprs, Robert F. Campbell

Master's Theses

Digital communications continues to be a relevant Field of study as new technologies appear and old methodologies get revisited or renovated. The goal of this research is to look into the old digital communication scheme of Bell 202 [67] used by APRS and improve software based demodulation performance. Improved performance is defined by being able to correctly decode more packets in an efficient, real time, manner. Most APRS demodulation is currently done using specialized hardware since that yields the best performance. This research shows that through using Sivan Toledo's javAX25 [72] software package, new demodulation algorithms can be implemented that …

Wavelength Accuracy Study For High-Density Fiber Bragg Grating Sensor Systems Using A Rapidly-Swept Akinetic-Laser Source, Jacob Egorov

Master's Theses

This thesis studies the center wavelength accuracy of a Fiber Bragg Grating Sensor system that has a large number of sensor elements both as a function of wavelength and as a function of position. Determining the center wavelength of each of the fiber optic sensors is a critical parameter that ultimately determines sensor accuracy. The high density environment can result in degradation of accuracy of the center wavelength measurement. This thesis aims to quantify this measurement error both with theoretical and experimental studies.

There are many sensing applications where optical fiber sensors are preferred over electrical sensors, such as the …

Energy Harvesting From Exercise Machines Buck-Boost Dc Dc Converter With The Lt8705 Controller, Ryan Matteo

Electrical Engineering

In order to increase sustainability and save money, the Energy Harvesting from Exercise Machines (EHFEM) system uses human supplied energy to self-power exercise equipment such as spin bikes, elliptical trainers, ergometers, etc. This document covers the design and implementation of a Buck-Boost DC-DC converter using the LT8705 controller into the EHFEM system. This project improves upon the overall efficiency of the Buck-Boost Converter designed by past groups working on the EHFEM system.

Transformer And Motor Protection Scheme, Bijan Vakilifathi

Electrical Engineering

No abstract provided.

Underwater Optical Wireless Audio Transceiver, Angel Ayala

Electrical Engineering

Scuba diving carries risks that can endanger lives. Many of these risks are preventable. However, an underwater communication system can increase a diver’s safety. Along with providing safety, an underwater communication device can enhance the scuba diver’s enjoyment.

A low cost underwater optical wireless audio transceiver is designed. The project consists of the off-the-shelf parts that uses a microphone and speaker to transmit and receive sound. The project uses the concepts of visible light communications and pulse width modulation to transmit and receive sound. Although sound is commonly transmitted through ultrasound methods, visible light communications has several advantages. Visible light …

Dynamic Liquefied Natural Gas (Lng) Processing With Energy Storage Applications, Farhad Fazlollahi

Theses and Dissertations

The cryogenic carbon capture™ (CCC) process provides energy- and cost-efficient carbon capture and can be configured to provide an energy storage system using an open-loop natural gas (NG) refrigeration system, which is called energy storing cryogenic carbon capture (CCC-ES™). This investigation focuses on the transient operation and especially on the dynamic response of this energy storage system and explores its efficiency, effectiveness, design, and operation. This investigation included four tasks.The first task explores the steady-state design of four different natural gas liquefaction processes simulated by Aspen HYSYS. These processes differ from traditional LNG process in that the CCC process vaporizes …

Purdue Mission To Mars: Recruiting High School Students To A Polytechnic College, Matthew Turner, Rustin Webster, Danielle Reynolds, Timothy Cooley, Andrew Mccart, Joseph F. Dues Jr.

School of Engineering Technology Faculty Publications

This paper presents the development and implementation of an integrative half-day recruiting event targeting high school students that combines elements of four degree programs: Organizational Leadership, Electrical Engineering Technology, Mechanical Engineering Technology, and Computer Graphics Technology. During the workshop, students engage in active learning: NAME REDACTED is transformed into an aerospace design think tank and high school students are transformed into Polytechnic interns. The interns are then presented with a challenge: A new form of bacteria has possibly been identified on Mars and soil samples must be collected for analysis. However, the next shuttle launch is in 3 hours and …

Systematic Review Of Engineering Technology Education Literature, Anne M. Lucietto, Eddy Efendy

School of Engineering Technology Faculty Publications

Few engineering technology education research publications exist; those that do are often viewed through the lens of the engineering education researcher. More specifically, engineering technology education is examined in the same manner as engineering education. The lack of rigorous research focusing on the education of engineering technology students may be the result of diverse engineering technology programs, and smaller research populations as compared to engineering and other STEM fields. Educators in engineering technology programs are challenged by this lack of discipline-specific rigorous research. The lack of engineering technology education research may be attributed to smaller numbers of engineering technology students …

Investigation Of Structural Capacity Of Geogrid-Reinforced Aggregate Base Materials In Flexible Pavements, Eric J. Sweat

Theses and Dissertations

The installation of geogrid as a means of extending the service life of a roadway or reducing the required base course thickness of a pavement structure has become increasingly popular. The realization of these benefits depends largely on the degree to which the geogrid reinforcement leads to an increase in the stiffness of the aggregate base course layer. The objective of this research was to investigate the structural capacity of geogrid-reinforced aggregate base materials in flexible pavements through full-scale testing. The scope involved field testing at two sites in northern Utah that each included five different geogrid-reinforced sections and five …

Quantifying Computer Vision Model Quality Using Various Processing Techniques, Samantha Anna Ruggles

Theses and Dissertations

Recently, the use of unmanned aerial vehicles (UAVs) has increased in popularity across several industries. Most notable, however, is the impact that this technology has had in research at academic institutions worldwide. As the technology for UAVs has improved, with that comes easier to operate, more accessible equipment. UAVs have been used in various types of applications and are quickly becoming a preferred method of studying and analyzing a site. Currently, the most common use of a UAV is to monitor a location of interest to a researcher that is difficult to gain access to otherwise. The UAV can be …

Nerve Regeneration Using Lysophosphatidylcholine And Nerve Growth Factor, Ryan Lavar Wood

Theses and Dissertations

Peripheral nerve damage affects hundreds of thousands of people every year. This study tested the effectiveness of using lysophosphatidylcholine (LPC) in combination with nerve growth factor (NGF) to increase the healing rate of damaged left sciatic nerves in female rats. The rats were randomly divided into eight groups: Sham, Right Sciatic, Crush, LPC, LPC-NGF, Crush- LPC, Crush-NGF, and Crush-LPC-NGF. The healing of the nerves was measured by monitoring gait, electrophysiological parameters (compound muscle action potential amplitudes and nerve conductance velocities) and morphological parameters (total fascicular area, total myelinated fiber counts, fiber densities, fiber diameters, and g-ratio). Gait and electrophysiological parameters …

Psychological Health Outcomes Within Usaf Remotely Piloted Aircraft Support Career Fields, Kris Anthony Ostrowski

Doctoral Dissertations and Master's Theses

Remotely piloted aircraft are now commonplace in modern warfare. Enlisted intelligence personnel in the U.S. Air Force (USAF) who support these activities have reported personal accounts of posttraumatic stress and fatigue, possibly due to viewing high-definition, full-motion-video, remote warfare. Rates of mental health diagnoses and counseling are unknown in this population. Incidence rates of 12 specific mental health outcomes were calculated for all enlisted active duty USAF Intelligence Specialists in the 1N1 and 1N0 career fields from 1 January 2006 through 31 December 2010, while considering various demographic and military variables. The incidence rates were compared to RPA sensor operators …

Incorporating Histograms Of Oriented Gradients Into Monte Carlo Localization, Michael K. Norris

Master's Theses

This work presents improvements to Monte Carlo Localization (MCL) for a mobile robot using computer vision. Solutions to the localization problem aim to provide fine resolution on location approximation, and also be resistant to changes in the environment. One such environment change is the kidnapped/teleported robot problem, where a robot is suddenly transported to a new location and must re-localize. The standard method of "Augmented MCL" uses particle filtering combined with addition of random particles under certain conditions to solve the kidnapped robot problem. This solution is robust, but not always fast. This work combines Histogram of Oriented Gradients (HOG) …

Bathymetric Survey For Lakes Azuei And Enriquillo, Hispaniola, Michael Piasecki, Mahrokh Moknatian, Fred Moshary, Joseph Cleto, Yolanda Leon, Jorge Gonzalez, Daniel Comarazamy

Publications and Research

The two largest lakes on the Caribbean Island of Hispaniola, Lake Azuei in Haiti and Lake Enriquillo in the Dominican Republic, have experienced dramatic growth and surface area expansion over the past few years leading to severe flooding and loss of arable land around the lake perimeters. In order to better understand the reasons for this unprecedented rate of expansion and the resulting consequences a multi-disciplinary team comprised of researchers from Haiti, the DR, and the US have embarked on an extensive data collecting and hydrologic and climatological modeling campaign. While the sensor deployment entails stations that measure climatological data …

Assessment Of A Writing Workshop Model For First-Year Engineering Students, Patricia Backer

Faculty Publications

This paper will report on a multi-year project to improve the writing skills of engineering freshmen at XXX University. For the last ten years, the college has offered an optional class to students who are not proficient in writing. Students can enroll in a one-unit lab class as many semesters as they wish to get practice in writing. The goal is to provide students with weekly writing activities that include: instruction in basic grammar, proofreading, and editing. In addition to study and practice exercises, students in this writing workshop have writing assignments, which provide practice in using correct grammar, spelling, …

Maker: Redesign Of A Multipurpose Hardware Tool To Improve Its Functionality And Marketability, David Alexander, Vimal Viswanathan, Shraddha Sangelkar, Johnathan Moody

Faculty Publications, Mechanical Engineering

In this maker project, we redesigned a hardware tool that is primarily used by linemen working in power companies. At the top of the posts where they work, it is essential to have easily accessible and easy-to-use tools with firm grip. With the use of a multi-purpose product that combines the functionalities of many other common tools, the handling of the tools can be made easy. This maker project is conducted as a case study for a larger research study where the investigators developed a new set of guidelines for the development of multi-purpose products. Though multi-purpose products are very …

User Interface Design Recommendations For Small Unmanned Aircraft Systems (Suas), Camilo Jimenez, Caitlin L. Faerevaag, Florian Jentsch

International Journal of Aviation, Aeronautics, and Aerospace

The number of small unmanned aircraft systems (sUAS) has dramatically increased in recent years. As a consequence, the number of incidents involving manned and unmanned aircraft has soared. For this reason, the Federal Aviation Administration has released a notice of proposed rulemaking to delineate the operational limitations for sUAS. Many efforts have been introduced to regulate the operations of these systems and educate operators. Despite these efforts, there are no clear standards related to the type of information that should be available to operators, or how this information should be conveyed during flight operations. For this reason we present a …

Design And Analysis Of Two Compliant Mechanism Designs For Use In Minimally Invasive Surgical Instruments, Jason Lon Dearden

Theses and Dissertations

Minimally invasive surgery (MIS) has several advantages over traditional methods. Scaling MIS instruments to smaller sizes and increasing their performance will enable surgeons to offer new procedures to a wider range of patients. In this work, two compliant mechanism-based minimally invasive surgical instrument wrist or gripper mechanisms are designed and analyzed.The cylindrical cross-axis flexural pivot (CCAFP) is a single-degree-of-freedom wrist mechanism that could be combined with existing gripper mechanisms to create a multi-degree-of freedom instrument. The simplicity of the CCAFP mechanism facilitates analysis and implementation. The flexures of the CCAFP are integral with the instrument shaft, enabling accessories to be …

Can We Teach A Programming Language As A Second Language?, Lulu Sun, Christina Frederick, Paula Sanjuan Espejo, Rachel Cunningham

Publications

This paper describes a design and implementation of a NSF sponsored project in 2015. This study will test the hypothesis that the use of cognitive frameworks in second language acquisition for the development of a blended learning of programming languages can improve engagement and the learning experience of engineering students. Using this approach will place greater emphasis on problem solving techniques that can be utilized in all courses. The online module consists of a series of short videos (10-20 minutes), online quizzes with tiered questions, and topic specified discussion board led by student researchers. Students’ demographic data, course-related behaviors such …

Investigation Of Thermal Scaling Effects For A Turbine Blade Leading Edge And Pressure Side Model, Ryan A. Lynch

Theses and Dissertations

Recent experiments have attempted to quantify the overall cooling effectiveness at elevated temperature conditions. The Film Cooling Rig (FCR) at the Air Force Institute of Technology has been modified to better match the configuration of a similar large scale, low temperature rig at the Air Force Research Laboratory. This has enabled comparison and trend identification of how various properties scale from the low to high temperature condition. Various internal cooling and hole geometry configurations were investigated over a range of temperatures while utilizing the thermal scaling capability of Inconel 718. Film cooling trends and measures of overall effectiveness were matched, …

Modelling And Energy Management Optimisation Of Battery Energy Storage System Based Photovoltaic Charging Station (Pv-Cs) For University Campus, Ayda Esfandyari, Brian Norton, Michael Conlon

Conference Papers

As utilization of Photovoltaic Charging Stations (PV-CS) that generate clean electricity from the sun increase, Technological University Dublin (DIT) adopts this application for accommodating the required charge of small campus Battery Electric Vehicles (BEVs). This paper presents the virtual simulation of the 10.5 kW Battery Energy Storage System (BESS) based PV-CS model. Transient System Simulation (TRNSYS) built-in climatic data and modular structure properties were adopted to replicate the experimentally proposed PV-CS, where special attention was paid to the electrical measurments and energy flow signals. The objective was set to model the PV-CS system, formulate an energy managment optimisation and justify …

Air Mobility Future: Evolving Command And Control Relationships In The Information Age, Ian M. Slazinik

Theses and Dissertations

This research paper analyzes information flow through theater Air Mobility Command and Control (C2) organizations. The purpose is to uncover guidelines going forward to adapt organizational structure and processes to increase the speed and reach of information. These guidelines could assist with improving organizational agility and decision making while adapting to future trends in the broader C2 enterprise. To collect data, the researcher conducted interviews with seventeen C2 experts with experience at various levels of C2, from worldwide to theater Air Mobility C2 organizations, from Air Mobility C2 leadership, to experts in non-mobility C2 divisions. Interview subjects shared their perceptions …

Planer Ultra Wide Band Antennas And Band Rejection Characteristics, Waqas Jamshed, Faiz Khalid, Zeeshan Ahmed, Farooq Bhatti

Articles

No abstract provided.

Resonant Effects In Nanoscale Bowtie Apertures, L. Ding, J. Qin, S. Guo, T. Liu, Edward C. Kinzel, L. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.