Engineering Commons^™

Multiple Content Adaptive Intelligent Watermarking Schemes For The Protection Of Blocks Of A Document Image, Chetan Kr Mr., S Nirmala Dr.

Journal of Digital Forensics, Security and Law

Most of the documents contain different types of information such as white space, static information and dynamic information or mix of static and dynamic information. In this paper, multiple watermarking schemes are proposed for protection of the information content. The proposed approach comprises of three phases. In Phase-1, the edges of the source document image are extracted and the edge image is decomposed into blocks of uniform size. In Phase-2, GLCM features like energy, homogeneity, contrast and correlation are extracted from each block and the blocks are classified as no-information, static, dynamic and mix of static and dynamic information content …

Reliability Underseepage Assessment Of Levees Incorporating Geomorphic Features And Length Effects, Lourdes Polanco Boulware

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

It has been estimated that approximately fifty percent of the United States’ population lives behind levees. Because these earth structures are typically long, subjected to seasonal changes and spatial variability, it is logical to analyze them in an uncertainty-based approach. This research is focused on assessing the potential of internal erosion related failure due to underseepage with the general objective of assessing the failure potential of individual geomorphic features while considering length effects. The project team was granted $204,000 from the National Science Foundation and $10,000 from the United States Society on Dams which resulted in research collaboration within graduate …

Experimental And Simplified Analytical Investigation Of Full Scale Sandwich Panel Walls, Salam Adil. Al-Rubaye

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Concrete sandwich wall panels have been used for decades in the precast concrete construction industry because of their thermal efficiency. To achieve full or partial-composite action in concrete sandwich panel walls, the engineer must obtain a percent composite action from a connector manufacturer, making some engineers uncomfortable. Engineers are dependent upon the recommendations given by the connector manufacturers to establish their designs. This project tested six full scale sandwich panel walls to evaluate the percent composite action of various connectors and compare the results to those provided by the composite connector manufacturers.

This project aimed to validate current procedures using …

An Obstacle Avoidance System For The Visually Impaired Using 3-D Point Cloud Processing, Evan Justin Taylor

Theses and Dissertations

The long white cane offers many benefits for the blind and visually impaired. Still, many report being injured both indoors and outdoors while using the long white cane. One frequent cause of injury is due to the fact that the long white cane cannot detect obstacles above the waist of the user. This thesis presents a system that attempts to augment the capabilities of the long white cane by sensing the environment around the user, creating a map of obstacles within the environment, and providing simple haptic feedback to the user. The proposed augmented cane system uses the Asus Xtion …

Characterization Of Mechanical Properties Of Battery Electrode Films From Acoustic Resonance Measurements, Kathryn Lanae Dallon

Theses and Dissertations

Measurements of the mechanical properties of lithium-ion battery electrode films can be used to quantify and improve manufacturing processes and to predict the mechanical and electrochemical performance of the battery. This thesis demonstrates the use of acoustic resonances to distinguish among commercial-grade battery films with different active electrode materials, thicknesses, and densities. Resonances are excited in a clamped circular area of the film using a pulsed infrared laser or speaker and responses are measured using an electret condenser microphone. A numerical model is used to quantify the sensitivity of resonances to changes in mechanical properties. When the numerical model is …

Life Cycle Assessment In Foundry Sand Reclamation – Comparison Of Secondary Reclamation Processes, Samuel Keith Ghormley

Department of Environmental Engineering: Theses and Other Student Research

Foundries represent a significant part of the base of the world’s economy and as a sector are one of the largest consumers of energy and producers of solid waste in the United States. Sand casting foundries use approximately 5-10% of their total energy on sand handling processes. By adding a secondary sand reclamation process, foundries can expect to become more energy efficient as well as reducing solid waste from the foundry. To measure the broader environmental impacts, life cycle assessment (LCA) can be used. The goal of the current research was to examine a medium-sized foundry in the United States …

Design And Validation Of An Experimental Setup To Study Single Phase Heat Transfer Enhancement Of Femtosecond Laser Processed Metallic Surfaces, Sarah Jane Wallis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In the present work, a single phase flow heat transfer experimental loop was designed with the intention of studying the effects of femtosecond laser surface processing (FLSP) on metallic surfaces with the specific goal of enhancing heat transfer in compact heat exchangers currently in use by NASA. This experimental setup went through two major design iterations which are detailed in this thesis. The first iteration consisted of a counterflow fluid-to-fluid heat exchanger, which measured overall heat transfer coefficients and pressure drops, where the overall heat transfer coefficient is defined in terms of the total thermal resistance to heat transfer between …

Synthesis And Characterization Of Glycidyl Methacrylate-Based Graft Copolymer Functional Interfaces, Nikolay Brordinov

All Dissertations

Modification of materials properties such as surface energy, wettability, ability to absorb, contain or release specific type of chemicals enables practical application of these materials in various scientific and engineering set-ups. However, designing protocol that could be easily adapted for different situations and simultaneously unlock multiple variations of the resulting properties is a non-trivial task. This dissertation is devoted to application of glycidyl methacrylate-based graft copolymers for the purposes of surface modification, establishing fundamental trends and dependencies of this process and exploring the possible range of applications. These materials have extremely valuable property to undergo controllable post-synthetic modifications including surface …

Micro-Cantilever Based Fiber Optic Hydrophone, Jie Liu

All Dissertations

Endoscopic photoacoustic imaging probe is becoming increasingly important for many clinical photoacoustic imaging applications in which the target tissue can only be accessed by introducing an endoscopic probe percutaneously or through a natural orifice. Miniature fiber optic hydrophone (FOH) has become an attractive choice for endoscopic photoacoustic imaging application. Fiber optic hydrophone has many proven advantages, including small size, light weight, immunity to electromagnetic interference, low cost for single-use application and capability of integration of excitation light source and acoustic wave receiver.

This dissertation demonstrates an open cavity, micro-cantilever based fiber optic Fabry-Perot interferometer (FPI) hydrophone. A fused silica micro-cantilever …

Kinetic Study Of Chitosan-Alginate Biopolymeric Nanoparticles For The Controlled Release Of Curcumin Diethyl Disuccinate, S Bhunchu, P Rojsitthisak, P Rojsitthisak

Journal of Metals, Materials and Minerals

The aim of this study was to investigate the release profile, and evaluate the best fitted kinetic model and mechanism, of curcumin diethyl disuccinate (CDD) from chitosan-alginate biopolymeric nanoparticles (CANPs) in simulated gastrointestinal fluids (without enzymes) and simulated body fluid. The CDD-loaded CANPs (CDD-CANPs) were prepared by oil-in-water emulsification and ionotropic gelation under the previously reported optimal condition (3 mg/mL of CDD, 4.05% (w/v) of TweenTM 80 and a chitosan:alginate mass ratio of 0.05:1), which resulted in CDD-CANPs with a favorable particle size (327±14 nm), zeta potential (-27.3±0.2 mV), encapsulation efficiency (51.2±2.2%) and loading capacity (11.2±0.8%). The in vitro release …

Utilization Of Aluminium Dross As A Main Raw Material For Synthesis Of Geopolymer, P Puksisuwan, P Laoratanakul, B Cherdhirunkorn

Journal of Metals, Materials and Minerals

Aluminium dross contains both small particles and large agglomerates, where the recyclable part is the large agglomerates with high aluminium metal content. The residual Al dross is unrecyclable small particles with very low aluminium metal content. In this research, the residual Al dross from the aluminium recycle industry and the bagasse ash from a biomass power plant were used as main raw materials for geopolymer fabrication with alkaline solutions (Na2SiO3 and NaOH) using in the typical geopolymerization process. After mixing with alkaline solutions, the mixtures were uniaxially pressed into a cylinder die. The samples were cured for 3, 7, 14 …

Modeling Acoustic Microfluidic Phenomena In Unconventional Geometries, Andrew Ledbetter

McKelvey School of Engineering Graduate Student Theses & Dissertations

In this work, the performance of a piezoelectrically-actuated ultrasonic droplet generator is analyzed by modeling the harmonic response of a two-dimensional representation of the device cross-section. Observed vibrational and acoustic resonances provide insight into optimal design conditions to achieve efficient, robust droplet ejection. Numerical simulations highlight the importance of the coupled electrical and mechanical behavior of the resonator assembly and show that elastic modes can effectively amplify or dampen acoustic modes within the fluid chamber. Experimentally-validated modeling results guide development of an optimization strategy to further improve device performance. In addition, the standing acoustic field that is the focus of …

Thermodynamics And Kinetics Of Dna Origami Cross-Tile Array Formation, Brett Michael Ward

Boise State University Theses and Dissertations

As the cost to continue scaling photolithography to pattern smaller semiconducting devices increases exponentially, new materials and fabrication approaches are being sought to extend and enhance current capabilities. DNA nanostructures have been identified as a promising material for patterning nanoscale devices, and several studies have demonstrated the ability to program DNA nanostructures to self-assemble into large scale arrays. These DNA arrays can be designed to create the patterns necessary for fabricating semiconductor device features. However, these structures are far from ideal and contain a number of defects that limit the adoption of this approach for manufacturing. In order to create …

Identifying Restaurants Proposing Novel Kinds Of Cuisines: Using Yelp Reviews, Haritha Akella

Boise State University Theses and Dissertations

These days with TV-shows and starred chefs, new kinds of cuisines appear in the market. The main cuisines like French, Italian, Japanese, Chinese and Indian are always appreciated but they are no longer the most popular. The new trend is the fusion cuisine, which is obtained by combining different main cuisines. The opening of a new restaurant proposing new kinds of cuisine produces a lot of excitement in people. They feel the need to try it and be part of this new culture. Yelp is a platform which publishes crowd sourced reviews about different businesses, in particular, restaurants. For some …

Cloudskulk: Design Of A Nested Virtual Machine Based Rootkit-In-The-Middle Attack, Joseph Anthony Connelly

Boise State University Theses and Dissertations

Virtualized cloud computing services are a crucial facet in the software industry today, with clear evidence of its usage quickly accelerating. Market research forecasts an increase in cloud workloads by more than triple, 3.3-fold, from 2014 to 2019 [33]. Integrating system security is then an intrinsic concern of cloud platform system administrators that with the growth of cloud usage, is becoming increasingly relevant. People working in the cloud demand security more than ever. In this paper, we take an offensive, malicious approach at targeting such cloud environments as we hope both cloud platform system administrators and software developers of these …

Development Of In-Vitro And In-Vivo Devices To Study The Mechanobiology Of Ligament Healing, John Bayard Everingham

Boise State University Theses and Dissertations

Ligament injuries are the most common sports injury in the United States. The current clinical practice for treating ligament injuries leaves many patients with significant pain and joint laxity for years following the initial injury. Controlled mechanical stimulation of the tissue after injury is necessary for robust healing, but the optimal mechanical environment for ligament healing is not fully understood. Alternative therapies, such as instrument assisted soft tissue mobilization (IASTM), offer a form of mechanical stimulation that is non-invasive and has shown promising clinical outcomes but the optimal dosage for IASTM treatments is unknown. The objective of this study was …

Effects Of The Internal Magnetic Field On The Magneto-Mechanical Properties Of Magnetic Shape Memory Alloys, Anthony Hobza

Boise State University Theses and Dissertations

Shape memory alloys are a class of functional material which recover from large strains without permanent deformation. The strain is accommodated by the displacement of twin boundaries in the martensite phase. The shape memory alloy Ni-Mn-Ga is also ferromagnetic. Ni-Mn-Ga preferentially magnetizes along a certain crystallographic axis. This direction of easy magnetization changes across twin boundaries, such that the directions in neighboring twin domains are nearly perpendicular.

The interaction of magnetic moments and interfaces including the crystal surface and twin boundary interfaces has a large role in the magnetization process of the material. The goal of this study is to …

Aliasing Of The Schumann Resonance Background Signal By Sprite-Associated Q-Bursts, Anirban Guha, Earle Williams, Robert Boldi, Gabriella Sátori, Tamás Nagy, József Bór, Joan Montanyà, Pascal Ortega

All Works

© 2017 The Authors The Earth's naturally occurring Schumann resonances (SR) are composed of a quasi-continuous background component and a larger-amplitude, short-duration transient component, otherwise called ‘Q-burst’ (Ogawa et al., 1967). Sprites in the mesosphere are also known to accompany the energetic positive ground flashes that launch the Q-bursts (Boccippio et al., 1995). Spectra of the background Schumann Resonances (SR) require a natural stabilization period of ∼10–12 min for the three conspicuous modal parameters to be derived from Lorentzian fitting. Before the spectra are computed and the fitting process is initiated, the raw time series data need to be properly …

Investigation Of Concrete Electrical Resistivity As A Performance Based Test, Amir Malakooti

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research project was to identify the extent that concrete resistivity measurements (bulk and/or surface) can be used as a performance based lab test to improve the quality of concrete in Utah bridge decks. By allowing UDOT to specify a required resistivity, concrete bridge deck quality will increase and future maintenance costs will decrease.

This research consisted of two phases: the field phase and the lab phase. In the field phase, concrete samples were gathered from local concrete producers in Utah. These concrete samples were made with common concrete mixes used in bridge decks across the state …

The Influence Of Varying Fiber Stacking Sequence On The Tensile, Impact, And Water Absorption Properties Of Unidirectional Flax/E-Glass Fiber Reinforced Epoxy Composite, Mohammed F. Al-Edhari

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis includes the study of the mechanical performance of two different types of fibers reinforced hybrid composites. Two kinds of fibers, natural fiber (flax) and synthetic fiber (E-glass), are used to reinforce epoxy resin. To evaluate the effective properties of the hybrid composites, a micromechanical analysis of the structure genome (SG) of a unidirectional fiber hybrid composites is performed using nite element analysis (FEA). Both fibers are assumed to be circular and packed in a hexagonal pattern. The effects of varying volume fractions and fiber locations, of the two fibers, on the elastic properties of the hybrid composites are …

Aerodynamic Centers Of Arbitrary Airfoils, Orrin Dean Pope

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The study of designing stable aircraft has been widespread and ongoing since the early days of Orville and Wilbur Wright and their famous Wright Flyer airplane. All aircraft as they fly through the air are subject to minor changes in the forces acting on them. The field of aircraft stability seeks to understand and predict how aircraft will respond to these changes in forces and to design aircraft such that when these forces change the aircraft remains stable. The mathematical equations used to predict aircraft stability rely on knowledge of the location of the aerodynamic center, the point through which …

Impacts Of Distributions And Trajectories On Navigation Uncertainty Using Line-Of-Sight Measurements To Known Landmarks In Gps-Denied Environments, Ryan D. Lamoreaux

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Unmanned vehicles are increasingly common in our world today. Self-driving ground vehicles and unmanned aerial vehicles (UAVs) such as quadcopters have become the fastest growing area of automated vehicles research. These systems use three main processes to autonomously travel from one location to another: guidance, navigation, and controls (GNC). Guidance refers to the process of determining a desired path of travel or trajectory, affecting velocities and orientations. Examples of guidance activities include path planning and obstacle avoidance. Effective guidance decisions require knowledge of one’s current location. Navigation systems typically answer questions such as: “Where am I? What is my orientation? …

Behavior Of Copper Oxide Nanoparticles In Soil Pore Waters As Influenced By Soil Characteristics, Bacteria, And Wheat Roots, Joshua Hortin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The goal of this project was to study the behavior of copper oxide nanoparticles in soil environments. Copper oxide nanoparticles have antimicrobial properties and may also be used in agricultural settings to provide a source of copper for plant health, but accidental or misapplication of these nanoparticles to soil may be damaging to the plant and its associated bacteria.

Dissolved soil organic matter that is present in soil pore waters dissolved nanoparticles, but did not dissolve the expected amounts from a geochemical model because the geochemical model did not take into account surface chemistry or coating of the nanoparticles by …

Advancing The Cyberinfrastructure For Integrated Water Resources Modeling, Caleb A. Buahin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Like other scientists, hydrologists encode mathematical formulations that simulate various hydrologic processes as computer programs so that problems with water resource management that would otherwise be manually intractable can be solved efficiently. These computer models are typically developed to answer specific questions within a specific study domain. For example, one computer model may be developed to solve for magnitudes of water flow and water levels in an aquifer while another may be developed to solve for magnitudes of water flow through a water distribution network of pipes and reservoirs. Interactions between different processes are often ignored or are approximated using …

Measurement Of Agriculture-Related Air Pollutant Emissions Using Point And Remote Sensors, Kori D. Moore

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Measuring air pollution emissions from agricultural activities is usually difficult because of their large area and variability. Traditional air quality sensors, called point samplers, measure conditions in one location, which may not adequately measure a plume. Remote sensors, instruments that measure pollution along a line rather than at a single point, are better able to measure conditions around large areas. This dissertation reports on four agricultural air emissions studies that used both point and remote sensors for comparison. The methods used to calculate the emissions are based on previous work and are further developed in these studies. In particular, an …

Investigation And Engineering Of Polyketide Biosynthetic Pathways, Lei Sun

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is focused on investigation and engineering of natural product biosynthetic pathways for efficient production of pharmaceutically important molecules or generation of new bioactive molecules for drug development.

Natural products are an important source of therapeutics, such as chromomycin (anti-cancer), emodin (anti-inflammatory and anti-tumor) and sprolaxine (anti-Helicobacter pylori). Metabolic engineering of natural product biosynthetic pathways shows its promise for creating and producing valuable compounds with chemical diversity for drug discovery. One goal of this research is to create highly efficient strains to biosynthesize valuable natural products. The engineered Streptomyces roseiscleroticus strain constructed in this work showed higher …

Estimating Evapotranspiration Using The Complementary Relationship And The Budyko Framework, Homin Kim

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Land surface actual evapotranspiration (ET) is an important process in terrestrial water balance and reliable estimates of ET are necessary to improve water resources management. In this regard, there is a growing body of literature that recognizes the importance of an accurate ET model. Among them, the complementary relationship between ET and potential ET (ETP) has been the subject of many studies because it uses only meteorological data as inputs. However, there is an increasing concern that some complementary relationship models perform poorly under dry conditions. To overcome this limitation, this dissertation was designed to extend the latest complementary relationship …

A Comparison Between Self-Cleaning Properties Via Rolling Droplets And Condensation On Superhyrophobic Surfaces, David Leland Miller

Theses and Dissertations

Superhydrophobic (SH) surfaces are super water repellent surfaces on which a droplet of water will bead up like a marble and roll off the surface with minimal tilting of the surface. This is caused by the combination of a hydrophobic coating and a rough surface structure. To achieve thermodynamic stability, surface tension of the water pulls the droplet into this shape to minimize the contact area between the droplet and the surface. This creates a high contact angle (CA) between the droplet and the surface and a low sliding angle (SA) of which the droplet begins to roll off the …

Microstructural Evaluation Of Hydrogen Embrittlement And Successive Recovery In Advanced High Strength Steel, Quentin Scott Allen

Theses and Dissertations

Advanced high strength steels (AHSS) have high susceptibility to hydrogen embrittlement, and are often exposed to hydrogen environments in processing. In order to study the embrittlement and recovery of steel, tensile tests were conducted on two different types of AHSS over time after hydrogen charging. Concentration measurements and hydrogen microprinting were carried out at the same time steps to visualize the hydrogen behavior during recovery. The diffusible hydrogen concentration was found to decay exponentially, and equations were found for the two types of steel. Hydrogen concentration decay rates were calculated to be -0.355 /hr in TBF steel, and -0.225 /hr …

Phased-Array Feed Instrumentation And Processing For Astronomical Detection, Interference Mitigation, And Transient Parameter Estimation, Richard Allen Black

Theses and Dissertations

Radio astronomy, the survey and study of naturally occurring astronomical radio signals, is a challenging field in terms of engineering requirements. The typical astronomical signal of interest is incredibly faint, resulting in very low signal-to-noise ratios (SNRs) on the order of -30 dB or lower. To detect such signals, one must have an uncommonly low and stable receiver noise temperature, high gain through large aperture reflectors, and state-of-the-art signal processing algorithms. One must also be able to mitigate the effects of interference, the presence of which, even if extremely weak, can completely mask the faint astronomical signals of interest. To …