Engineering Commons^™

Size-Scale Effects Of Nonlinear Weir Hydraulics, Nathan L. Young

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Experimental physical model studies of hydraulic structures are often conducted to replicate flow behavior that may occur at the prototype scale. Geometric similitude is most often maintained between the prototype and model when studying reservoir and open channel hydraulic structures to account for the dominant gravity and inertia forces while other fluid forces (e.g., viscosity,surface tension) are assumed negligible. However, as model size and/or upstream head decreases, other fluid forces can exceed the negligible level and influence model flow behavior. This phenomenon is referred to as size-scale effects and is one potential origin of error in predicting the prototype behavior …

Simulation And Optimization Models To Evaluate Performance Of Aquifer Storage And Recovery Wells In Fresh Water Aquifers, Ali Forghani

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Aquifer storage and recovery (ASR) involves artificially recharging an aquifer through well(s) using surplus water for later recovery in high-demand months. The operators of the studied ASR system developed the system as a means of receiving additional water rights to supplement their pre-existing water rights for extraction in dry months. However, the region’s water regulators define the performance of this ASR system as the amount of the injected water that is recoverable from the same wells during extraction periods. The study proposes recovery effectiveness (REN) as the performance index of this ASR system. REN equals the injectate proportion that the …

Evaluation Of A Side-By-Side Full-Scale Biofiltration Conversion In A Nutrient-Limited Environment, Stetson S. Bassett

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In order to meet increasing water demands and more stringent regulations drinking water treatment plant managers must continually look to new treatment strategies and optimization techniques. One such strategy is to eliminate chlorine residual before filtration, allowing indigenous bacteria already present in the source water to grow on the filter media. These microorganisms help improve effluent water quality by increasing organic and inorganic contaminant removal. The process is known as biological filtration, or biofiltration. The implications of converting a conventional filtration plant (not specifically designed for biofiltration) to a biofiltration plant are still not well understood. Therefore, the purpose of …

Modular, Scalable Battery Systems With Integrated Cell Balancing And Dc Bus Power Processing, Muhammad Muneeb Ur Rehman

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Traditional electric vehicle and stationary battery systems use series-connected battery packs that employ centralized battery management and power processing architecture. Though, these systems meet the basic safety and power requirements with a simple hard- ware structure, the approach results in a battery pack that is energy and power limited by weak cells throughout life and most importantly at end-of-life. The applications of battery systems can benefit significantly from modular, scalable battery systems capable of advanced cell balancing, efficient power processing, and cost gains via reuse beyond first-use application. The design of modular battery systems has unique requirements for the power …

Superhydrophobic, Carbon-Infiltrated Carbon Nanotubes On Si And 316l Stainless Steel With Tunable Geometry, Kimberly A. Stevens, Christian D. Esplin, Taylor M. Davis, D. Jacob Butterfield, Philip S. Ng, Anton E. Bowden, Brian D. Jensen, Brian D. Iverson

Faculty Publications

Use of carbon nanotubes to create superhydrophobic coatings has been considered due to their ability to offer a relatively uniform nanostructure. However, carbon nanotubes (CNTs) may be considered delicate with a typical diameter of tens of nanometers for a multi‐walled CNT; as‐grown carbon nanotubes often require the addition of a thin‐film hydrophobic coating to render them superhydrophobic. Furthermore, fine control over the diameter of the as‐grown CNTs, or overall nanostructure is difficult. This work demonstrates the utility of using carbon infiltration to layer amorphous carbon on multi‐walled nanotubes to improve structural integrity and achieve superhydrophobic behavior with tunable geometry. These …

Development Of Scalable Simulator For Spiking Neural Network, Jae Sang Ha

McKelvey School of Engineering Graduate Student Theses & Dissertations

A neural network simulator for Spiking Neural Network (SNN) is a useful research tool to model brain functions with a computer. With this tool, different parameters can be explored easily compared to using a real brain. For several decades, researchers have developed many software packages and simulators to accelerate research in computational neuroscience. However, despite their advantages, different neural simulators possess different limitations, such as flexibility of choosing different neuron models and scalability of simulators for large numbers of neurons. This paper demonstrates an efficient and scalable spiking neural simulator that is based on growth transform neurons and runs on …

The Natural Aging Effect On Hardenability In Al-Mg-Si: A Complex Interaction Between Composition And Heat Treatment Parameters, Alex Poznak, Violet Thole, Paul G. Sanders

Michigan Tech Publications, Part 1

The technological relevance of Al-Mg-Si alloys has been rapidly growing over the last decade. Of particular interest to current and future applications is the problematic negative effect of prior natural aging on subsequent artificial age hardening. The influence of natural aging is dependent on both processing and compositional variables and has origins that are far from well-understood. This work examines the hardenability of 6000 series alloys under a wide range of conditions, paying particular attention to the natural aging effect. Experimental variables include alloy composition (Mg + Si, Mg/Si), cooling rate after solutionization, and duration of prior natural aging. Hardenability …

Wisdom Of Artificial Crowds Feature Selection In Untargeted Metabolomics: An Application To The Development Of A Blood-Based Diagnostic Test For Thrombotic Myocardial Infarction, Patrick J. Trainor, Roman V. Yampolskiy, Andrew P. Defilippis

Faculty and Staff Scholarship

Introduction: Heart disease remains a leading cause of global mortality. While acute myocardial infarction (colloquially: heart attack), has multiple proximate causes, proximate etiology cannot be determined by a blood-based diagnostic test. We enrolled a suitable patient cohort and conducted a non-targeted quantification of plasma metabolites by mass spectrometry for developing a test that can differentiate between thrombotic MI, non-thrombotic MI, and stable disease. A significant challenge in developing such a diagnostic test is solving the NP-hard problem of feature selection for constructing an optimal statistical classifier. Objective: We employed a Wisdom of Artificial Crowds (WoAC) strategy for solving the feature …

Protection, Automation, And Frequency Stability Analysis Of A Laboratory Microgrid System, Christopher Eric Osborn

Master's Theses

Due to increasing changes in the power industry, Cal Poly San Luis Obispo's electrical engineering department introduced a set of initiatives to adequately equip students with the skills and knowledge to interact with new technologies. Specifically, the department proposed a microgrid and power systems protection and automation laboratory to strengthen students' knowledge of microprocessor-based relays. This paper outlines a microgrid laboratory system that fulfills the initiative's goal and proposes a collection of laboratory experiments for inclusion in a new laboratory course at Cal Poly. The experiments provide students with practical experience using Schweitzer Engineering Laboratory (SEL) relays and teach fundamental …

Protection Against Ungrounded Single Phase Open Circuit Faults In 3-Phase Distribution Transformers, Higinio Ariel Montoya

Master's Theses

This thesis explores the impacts and behavior of 3-phase distribution transformers when subject to ungrounded single phase open circuit faults. A simple 3-phase system is modeled using MATLAB Simulink and operation under fault conditions are simulated and studied. Simulation results are confirmed via lab experimentation. Finally, a robust detection and protection method using neutral current injection (as proposed in industry literature) is built and demonstrated.

Electric utility operating experience has demonstrated that all too often, loads on 3-phase distribution transformers are not adequately protected against an ungrounded single phase open circuit fault (commonly called “single phasing”). This type of fault …

Knee Angles And Axes Crosstalk Correction In Gait, Cycling, And Elliptical Training Exercises, Jordan M. Skaro

Master's Theses

When conducting motion analysis using 3-dimensional motion capture technology, errors in marker placement on the knee results in a widely observed phenomenon known as “crosstalk” [1-18] in calculated knee joint angles (i.e., flexion-extension (FE), adduction-abduction (AA), internal-external rotation (IE)). Principal Component Analysis (PCA) has recently been proposed as a post hoc method to reduce crosstalk errors and operates by minimizing the correlation between the knee angles [1, 2]. However, recent studies that have used PCA have neither considered exercises, such as cycling (C) and elliptical training (E), other than gait (G) nor estimated the corrected knee axes following PCA correction. …

Thermal Removal Of Carbon Dioxide From The Atmosphere: Energy Requirements And Scaling Issues, Ted Von Hippel

Publications

I conduct a systems-level study of direct air capture of CO2 using techniques from thermal physics. This system relies on a combination of an efficient heat exchanger, radiative cooling, and refrigeration, all at industrial scale and operated in environments at low ambient temperatures. While technological developments will be required for such a system to operate efficiently, those developments rest on a long history of refrigeration expertise and technology, and they can be developed and tested at modest scale. I estimate that the energy required to remove CO2 via this approach is comparable to direct air capture by other techniques. The …

Remote Vibration Estimation Using Displaced-Phase-Center Antenna Sar For Strong Clutter Environments, Justin B. Campbell, Francisco Pérez, Qi Wang, Balasubramaniam Santhanam, Ralf Dunkel, Armin W. Doerry, Thomas Atwood, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

It has been previously demonstrated that it is possible to perform remote vibrometry using synthetic aperture radar (SAR) in conjunction with the discrete fractional Fourier transform (DFrFT). Specifically, the DFrFT estimates the chirp parameters (related to the instantaneous acceleration of a vibrating object) of a slow-time signal associated with the SAR image. However, ground clutter surrounding a vibrating object introduces uncertainties in the estimate of the chirp parameter retrieved via the DFrFT method. To overcome this shortcoming, various techniques based on subspace decomposition of the SAR slow-time signal have been developed. Nonetheless, the effectiveness of these techniques is limited to …

Building A Smart Nation: Singapore’S Digital Journey, Siu Loon Hoe

Research Collection School Of Computing and Information Systems

The journey towards smart city status is a strong global trend as governments around the world strive to harness technology to improve the quality of life for their citizens (United Nations, 2016). The widespread phenomenon of becoming “smart” is a key topic of discussion and research that continues to change as new digital technologies develop (Ishkineeva et al., 2015). The smart cities theme is important because it explores how governments, as providers of public goods, harness digital technologies to improve the lives of citizens around the world in the present and the future.

The Implementation Of Opportunistic Multiple Spacecraft Per Antenna Concepts On The Msu-Sta Deep Space Station 17, Murphy C. Stratton

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science, Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Murphy C. Stratton on April 30, 2018.

Thermal Freetop: A Free Open-Source Spacecraft Thermal Analysis Software Package, Yu Tso

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Yu Tso on April 30, 2018.

Investigation Of Deep Neural Network Image Processing For Cubesat Size Satellites, Adam D. Braun

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Adam D. Braun on April 30, 2018.

Hydrothermal Pre-Treatment Process Of Phosphogypsum For Enhanced Rare Earths Recovery, Volha Yahorava, Eugene Lakay, Wilma Clark

Beneficiation of Phosphates VIII

Phosphogypsum (PG) is an industrial waste of phosphoric acid (H₃PO₄) production from phosphate ore by sulphuric acid (H₂SO₄) digestion, commonly known as the “wet acid” process. Phosphate rock often contains some valuable rare earth elements (REE) and it is well-established that from 70% to 85% of REE originally present in the phosphate rock end up in the PG, with an average REE content of ~0.4 wt. % [1-4]. PG is considered to be an attractive secondary resource of REE. However, processes available currently for REE recovery are often very expensive, sometimes impractical, …

Surface Chemistry And Flotation Behavior Of Monazite, Apatite, Ilmenite, Quartz, Rutile, And Zircon With Octanohydroxamic Acid, Corby Anderson, Josue Mushidi

Beneficiation of Phosphates VIII

Global increase in rare earth demand and consumption has led to a further understanding of their beneficiation and recovery. Monazite is the second most important rare earth mineral that can be further exploited. In this study, the surface chemistry of monazite in terms of zeta potential, adsorption density, and flotation response by microflotation using octanohydroxamic acid is determined. Apatite, ilmenite, quartz, rutile, and zircon are minerals that frequently occur with monazite among other minerals, hence were chosen as gangue minerals in this study. The Iso Electric Point (IEP) of monazite, apatite, ilmenite, quartz, rutile, and zircon are 5.3, 8.7, 3.8, …

Program Progress Performance Report #2, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Holding Pattern: An Analysis Of Heathrow Airport’S Capacity Quandary, Dudley G. Oscar

Honors Program Theses and Projects

One of the most contentious topics of discussion in Aviation today revolves around what many describe as the “overcrowding” of Heathrow Airport in London. Operating at over 99% capacity between its only 2 runways, Heathrow is the world’s busiest airport, a title which it has had difficulty taking pride in due to its implications (“Airport Capacity in London,” 2013). This has also been an ordeal for passengers navigating through the airport and experiencing the often absurdly long delays as aircraft are kept in holding patterns over the congested airport waiting to land, but also for airlines that have had to …

Budget Planning Process & Forecasting For It Enterprise, Joel Fillmon

Senior Design Project For Engineers

No abstract provided.

Improvement Of Quality Processes- Asset Condition Assessment Tool And Process For Vanderlande Industries, Mariantonia Hoyos Lopez, Tori Shonk

Senior Design Project For Engineers

Vanderlande Industries is the global market leader in the value added logistic process automation for airports, the parcel market, warehouses, and e-commerce. The company’s extensive portfolio of integrated solutions results in fast, reliable and efficient automation technology. The VI Marietta office supports airport sites that have an operational BHS. These sites hire VI to operate and maintain the site. Preventive, corrective, and emergency maintenance is completed on the equipment to maintain operational success. Usually, the U.S. sites that are supported have BHS systems that are old and worn down. It is important for VI to determine the risk of maintaining …

Class A Average Handle Time Standard, Stephanie Lee

Senior Design Project For Engineers

This report provides an analysis and evaluation on the Average Handle Time performed at Class A. The Universal, Shipping, International, Tracking, InfoNotice, Amazon, Field Support Group, and Preferred Customer Associates call types are evaluated in this study. An Average Handle Time Standard is created, while meeting the appropriate sample size, covering multiple site locations, at various times of the day and days of the week, and meeting corporate quality expectations. Methods of cost analysis, Six Sigma, and optimization are utilized in this study. The V-Process Model is used to verify the system. The implementation and results served as the verification …

Carlex Glass Laminated Side Glass Process Optimization, Jake Massingill, Marshal Turner

Senior Design Project For Engineers

The intent of this project is to determine how many racks of glass should be inserted into the autoclave at a given time in order to maximize productivity of the Laminated Side Glass line. Based on this value, the total number of workers necessary at finishing and the cycle time of the bag furnace were determined. This was achieved by building a model of the line in Arena and analyzing it. The model demonstrated that twelve is the optimal number of racks to insert at a given time, only one team of two workers is necessary per shift, and that …

Atlanta (Kennesaw) Ereturn Project, Shannon Ard, Trisha Donnelly-Nelson, Scott Michael

Senior Design Project For Engineers

The Siemens Energy, Inc. Tool and Instrument Facility is an internal tool rental center that assembles tool kits and ships them to power generation sites. When miscellaneous, broken or extra tools are returned, they are sent to the eReturn area, where tools are processed and reentered into inventory. The current eReturn system is long and complex. The cluttered area causes tools to remain in eReturn for extended periods before being reentered into the inventory. The additional time causes unnecessary ordering and prevents tools from being used in more kits. The team's objective is to determine a solution that will allow …

Atlanta Traffic Optimization Final Design Review, Biram Nicol, Vick Abwavo, Brandon Harris

Senior Design Project For Engineers

To solve the Metro-Atlanta traffic problem, we have embarked in numerous efforts to find feasible goals that had worked in other states with similar situations. In dealing with the traffic problem around the Metro area, we have designed a rail system to counter if our proposed idea of eliminating trucks within the Metro area is realized. This will be a more cost-effective area as the rail system is set to pay for itself after a decade and half of operation.

This idea might be considered radical, but our findings showed that 39.50% of freight is transferred by rail according to …

Grady Health Systems Linen Optimization, Kyleia Hutton, Samira Abdi

Senior Design Project For Engineers

Grady Memorial Hospital, under Grady Health Systems (GHS), is the fifth largest public hospital systems in the United States of America. In the Southeast region, Grady Memorial Hospital is a premier level I trauma institution, that also provides other medical service specialties that accumulate a diverse, and knowledgeable set of medical professionals. Within this report, there are various recommendations that our team has presented based on different scenarios that could be present within the interaction of the linen management department and other departments at Grady Health Systems. These recommendations will aid in determining the best decision that can be made …

Advancing The Understanding Of Environmental Transformations, Bioavailability And Effects Of Nanomaterials, An International Us Environmental Protection Agency—Uk Environmental Nanoscience Initiative Joint Program, Mitch M. Lasat, Kian Fan Chung, Jamie Lead, Steve Mcgrath, Richard J. Owen, Sophie Rocks, Jason M. Unrine, Junfeng Zhang

Plant and Soil Sciences Faculty Publications

Nanotechnology has significant economic, health, and environmental benefits, including renewable energy and innovative environmental solutions. Manufactured nanoparticles have been incorporated into new materials and products because of their novel or enhanced properties. These very same properties also have prompted concerns about the potential environmental and human health hazard and risk posed by the manufactured nanomaterials. Appropriate risk management responses require the development of models capable of predicting the environmental and human health effects of the nanomaterials. Development of predictive models has been hampered by a lack of information concerning the environmental fate, behavior and effects of manufactured nanoparticles. The United …

Feasibility Study Of Mohawk Industries Water Bottle Recycling Program With Automated Compactor/Baler, Brody Cook, Chris Yeager, Parker Cook

Senior Design Project For Engineers

Mohawk Industries requested a senior design project for a feasibility study of a compactor/baler program. The compactor/baler program has the potential to reduce Mohawk Industries’ polyethylene terephthalate (PET) recycling center costs, thereby increasing the company’s profits. Mohawk Industries uses PET from recycled plastic bottles as a raw material to extrude carpet yarn fibers. Currently, Mohawk Industries has two methods to obtain the PET required to extrude the carpet yarn fibers: purchase recycled bottles from landfills/recycling centers and extrude into PET pellets, or purchase PET pellets from an outside source at a much higher cost. The compactor/baler program would introduce a …