Engineering Commons^™

Trend Analysis Of Las Vegas Land Cover And Temperature Using Remote Sensing, Haroon Stephen

Civil and Environmental Engineering and Construction Faculty Research

The Las Vegas urban area expanded rapidly during the last two decades. In order to understand the impacts on the environment, it is imperative that the rate and type of urban expansion is determined. Remote sensing is an efficient and effective way to study spatial change in urban areas and Spectral Mixture Analysis (SMA) is a valuable technique to retrieve subpixel landcover information from remote sensing images. In this research, urban growth trends in Las Vegas are studied over the 1990 to 2010 period using images from Landsat 5 Thematic Mapper (TM) and National Agricultural Imagery Program (NAIP). The SMA …

Enhancement Of Rainfall-Triggered Shallow Landslide Hazard Assessment At Regional And Site Scales Using Remote Sensing And Slope Stability Analysis Coupled With Infiltration Modeling, Thilanki Maneesha Dahigamuwa Rajaguru Mudiyanselage

USF Tampa Graduate Theses and Dissertations

Landslides cause significant damage to property and human lives throughout the world. Rainfall is the most common triggering factor for the occurrence of landslides. This dissertation presents two novel methodologies for assessment of rainfall-triggered shallow landslide hazard. The first method focuses on using remotely sensed soil moisture and soil surface properties in developing a framework for real-time regional scale landslide hazard assessment while the second method is a deterministic approach to landslide hazard assessment of the specific sites identified during first assessment. In the latter approach, landslide inducing transient seepage in soil during rainfall and its effect on slope stability …

X-Search: An Open Access Interface For Cross-Cohort Exploration Of The National Sleep Research Resource, Licong Cui, Ningzhou Zeng, Matthew Kim, Remo Mueller, Emily Ruth Hankosky, Susan Redline, Guo-Qiang Zhang

Computer Science Faculty Publications

Background: The National Sleep Research Resource (NSRR) is a large-scale, openly shared, data repository of de-identified, highly curated clinical sleep data from multiple NIH-funded epidemiological studies. Although many data repositories allow users to browse their content, few support fine-grained, cross-cohort query and exploration at study-subject level. We introduce a cross-cohort query and exploration system, called X-search, to enable researchers to query patient cohort counts across a growing number of completed, NIH-funded studies in NSRR and explore the feasibility or likelihood of reusing the data for research studies.

Methods: X-search has been designed as a general framework with two loosely-coupled components: …

Wastewater In Context: Systems-Based Approaches To Improving Wastewater Infrastructure Transitions, Christine Prouty

USF Tampa Graduate Theses and Dissertations

Coastal communities and ecosystems around the world are some of those most vulnerable to the impacts of climate change. In particular, the wastewater treatment systems in these areas are on the forefront of the effects of increasing frequency, duration, and intensity associated with extreme weather events. As such, decision making about adopting new wastewater technologies or transitioning to an improved treatment portfolio is an important area of research for coastal communities because they are critically linked to the health of the nearby aquatic ecosystems (i.e. tourism, fishing, cultural heritage, climate protection).

The decision making process about technology adoption and transitions …

Aqueous Humor Dynamics And The Constant-Pressure Perfusion Model Of Experimental Glaucoma In Brown-Norway Rats, Kayla R. Ficarrotta

USF Tampa Graduate Theses and Dissertations

Glaucoma affects tens of millions of people and is the leading cause of irreversible blindness worldwide. Virtually all current glaucoma therapies target elevated intraocular pressure (IOP); however, the contribution of intracranial pressure (ICP) to glaucoma has recently garnered interest. Strain at the optic nerve head is now known to depend on the translaminar pressure difference (TLPD), which is the difference between IOP and ICP, rather than IOP alone. A better understanding of how IOP and ICP relate to glaucoma development and progression is essential for developing improved therapies and diagnostic tests. Glaucoma is commonly modeled in rats, yet aqueous humor …

A New Efficient Domain Decomposition Method For Highly Irregular Via Patterns, Ping Li, Lijun Jiang, Xiaoyan Xiong, Hakan Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

In the high-speed signal path on PCB and packagings, vias usually causes most discontinuities and thereby crosstalks. In simulation and characterizations, they also generate more errors than the trace parts due to rich modes around them. To achieve both efficiency and accuracy, in this paper, a new domain decomposition based finite element time domain (FETD) method is proposed for the analysis of power/ground plate pairs with various types of antipads. Using the magnetic field feature, the 3D computational domain is firstly represented by a quasi-2D field. Then by taking advantage of the fast decaying property of high order modes, the …

Analysis Of Printed Electronic Adhesion, Electrical, Mechanical, And Thermal Performance For Resilient Hybrid Electronics, Clayton Neff

USF Tampa Graduate Theses and Dissertations

Today’s state of the art additive manufacturing (AM) systems have the ability to fabricate multi-material devices with novel capabilities that were previously constrained by traditional manufacturing. AM machines fuse or deposit material in an additive fashion only where necessary, thus unlocking advantages of mass customization, no part-specific tooling, near arbitrary geometric complexity, and reduced lead times and cost. The combination of conductive ink micro-dispensing AM process with hybrid manufacturing processes including: laser machining, CNC machining, and pick & place enables the fabrication of printed electronics. Printed electronics exploit the integration of AM with hybrid processes and allow embedded and/or conformal …

Micro-Flow Nanocatalysis: Synergic Effect Of Tfoh@Spions And Micro-Flow Technology As An Efficient And Robust Catalytic System For The Synthesis Of Plasticizers, Maryam Tashi, Behnaz Shafiee, Yoshie Sakamaki, Ji-Yun Hu, Zachary Heidrick, Ahmad R. Khosropour, M. Hassan Beyzavi

Chemistry & Biochemistry Faculty Publications and Presentations

The combination of continuous flow technology with immobilizing of only 0.13 mol% of triflic acid (TfOH) on silica-encapsulated superparamagnetic iron oxide nanoparticles (SPIONs) under solvent-free conditions successfully provided a powerful, efficient, and eco-friendly route for the synthesis of plasticizers. The turnover frequency value in micro-flow conditions varied in the range of 948.7 to 7384.6 h−1 compared to 403.8 to 3099 h−1 for in-flask. This technique works efficiently, encouraging future applications of micro-flow nano-catalysis in green chemistry.

System And Methods For Ventilation Through A Body Cavity, Mark A. Borden, Benjamin S. Terry

Department of Mechanical and Materials Engineering: Faculty Publications

A system and methods for the delivery of oxygen through a body cavity of a subject using oxygen microbubbles . Through circulation of oxygen microbubbles through the body cavity , oxygen and carbon dioxide exchange may occur . Overall improvement in extending survival rate time during emergency situations caused by pulmonary or similar oxygen - intake restricting injury and / or failure may be achieved through use of the invented system and methods .

Cloudsat: Iot Approach To Small Satellite Ground Infrastructure, Brian Zufelt

Electrical and Computer Engineering ETDs

Over the last decade, the cost of space access has dramatically decreased with the creation of the CubeSat standard. The CubeSat standard defines the structural requirements for an on-orbit deployer and satellite to be placed into orbit. The average cost of creating a space mission with the CubeSat standard can range from $200 thousand to over $3 million. This lower cost has allowed many Universities, and small businesses to create their own space programs. However, a significant portion of the investment for any new space asset is the development of the ground system to communicate with the satellite. These costs …

The Application Of Electric Cell-Substrate Impedance Sensing (Ecis) Biosensors, Xudong Zhang, Sunghoon Jang

Publications and Research

Electric cell-substrate impedance sensing (ECIS) is a label-free and non-invasive technique for analyzing the activities and morphologies of cells. The ECIS sensors are able to measure the impedance spectroscopy of cells attaching on the sensor substrates. The cell activities and morphologies influence the measure impedance directly. Traditional toxicity analysis has complicated processes compared to biosensor-based analysis. In this study, the toxicity analysis was performed with biosensor based on ECIS technique. The experimental results show that the ECIS sensor is able to quickly distinguish the toxic and non-toxic substance.

Sensor-Based Safety Performance Assessment Of Individual Construction Workers, Jeewoong Park, Yong K. Cho, Ali Khodabandelu

Civil and Environmental Engineering and Construction Faculty Research

Over the last decade, researchers have explored various technologies and methodologies to enhance worker safety at construction sites. The use of advanced sensing technologies mainly has focused on detecting and warning about safety issues by directly relying on the detection capabilities of these technologies. Until now, very little research has explored methods to quantitatively assess individual workers’ safety performance. For this, this study uses a tracking system to collect and use individuals’ location data in the proposed safety framework. A computational and analytical procedure/model was developed to quantify the safety performance of individual workers beyond detection and warning. The framework …

Multilayer Dielectric Rod Waveguide And Dielectric Rod Antenna With Enhanced Performance, Denise C. Lugo

USF Tampa Graduate Theses and Dissertations

This dissertation presents first a comprehensive study of the design and performance of a multilayer dielectric rod waveguide (DRW) with rectangular cross-section. The design is comprised of a high permittivity core encased by a low permittivity cladding. A modal analysis of the multilayer DRW with a 2:1 core aspect ratio is presented and a mathematical model is proposed to characterize the fundamental mode cutoff frequency in terms of the core and cladding permittivity and the core dimensions. The explicit nature of the model is useful for design and it offers an excellent match to the full-wave EM simulation data. The …

Investigation Of Acetaminophen And Caffeine Removal Using Manganese Oxides And Granular Activated Carbon In Column Experiments, Rachael E. Miera

Civil Engineering ETDs

This study was conducted to investigate the application of manganese dioxide (MnO_x(s)) and granular activated carbon (GAC) media for the removal of the acetaminophen and caffeine. Treatment of emerging micropollutants has become a concern due to their effects on environmental health. Manganese oxides can be a viable alternative for water treatment due to their abundance in the environment. Laboratory scale flow through column experiments were performed using different combinations of commercial MnO_x(s) and GAC to assess the removal of caffeine and acetaminophen, and the release of Mn due to the reductive dissolution of MnO_x(s). Results …

Carrier Dynamics In High-Speed Iii-Nitride Light-Emitting Diodes For Visible-Light Communication, Arman Rashidi

Optical Science and Engineering ETDs

III-nitride light-emitting diodes (LEDs) are now ubiquitous in solid-state lighting (SSL) systems. Despite the significant advancement of III-nitride LEDs, the origins of fundamental challenges such as efficiency droop, thermal droop, and green gap are not completely understood. In addition, emerging applications such as micro-pixel LED displays and visible-light communication (VLC) require efficient LEDs capable of high-speed modulation. Studies of carrier dynamics are essential to better understand the fundamental efficiency challenges and enable the design of high-efficiency, high-speed LEDs. Among approaches to characterize the carrier dynamics in LEDs, electrically injected methods are preferred over optically pumped methods to capture the carrier …

Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly

Faculty Publications

In recent years, as a result of significant climate change, stringent windstorms are becoming more frequent than before. Given the threat that windstorms bring to people and property, wind/structural engineering research is imperative to improve the resilience of existing and new infrastructure, for community safety and assets protection. The Windstorm Impact, Science and Engineering (WISE) research program at Louisiana State University (LSU) focuses on creating new knowledge applicable to the mitigation of existing and new infrastructure, to survive and perform optimally under natural hazards. To achieve our research goals, we address two imperious challenges: (i) characterization of realistic wind forces …

Axial Compressive Behavior Of Square Ice Filled Steel Tubular Stub Columns, Yanlei Wang, Guipeng Chen, Baolin Wan, Hao Lin

Civil and Environmental Engineering Faculty Research and Publications

Concrete has many limitations in the building construction in cold areas. However, there is abundant ice in those regions. Therefore, using ice as a substitute for concrete has been explored by researchers. Inspired by the idea of square concrete filled steel tube (CFT), a new column form termed square ice filled steel tubular (IFT) column is proposed in this study. It consists of a square outer steel tube with the inner space filled with ice. A total of eighteen stub columns were made and tested under axial compression, including three circular plain ice specimens, nine square IFT specimens and six …

Search And Review Of The Literature On Engineering Design Challenges In Secondary School Settings, Matthew Lammi, Cameron Denson, Paul Asunda

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering design activities offer the promise of enhanced learning and teaching in pre-college science, technology, engineering, and mathematics (STEM) settings. The wide variation and lack of coherence in research and practice concerning pre-college engineering design challenges necessitates an investigation of the literature. The overarching research question guiding this search and review of literature was, ‘‘How are engineering design challenges conceptualized in pre-college environments?’’ A search and review coupled with iterative thematic analysis was employed to understand and conceptualize the current body of literature on pre-college engineering design challenges. It is anticipated that this review will provide a general picture of …

Evaluation Of The Weak Constraint Data Assimilation Approach For Estimating Turbulent Heat Fluxes At Six Sites, Xinlei He, Tongren Xu, Sayed M. Bateni, C.M.U. Neale, Thomas Auligne, Shaomin Liu, Kaicun Wang, Kebiao Mao, Yunjun Yao

Daugherty Water for Food Global Institute: Faculty Publications

A number of studies have estimated turbulent heat fluxes by assimilating sequences of land surface temperature (LST) observations into the strong constraint-variational data assimilation (SC-VDA) approaches. The SC-VDA approaches do not account for the structural model errors and uncertainties in the micrometeorological variables. In contrast to the SC-VDA approaches, the WC-VDA approach (the so-called weak constraint-VDA) accounts for the effects of structural and model errors by adding a model error term. In this study, the WC-VDA approach is tested at six study sites with different climatic and vegetative conditions. Its performance is also compared with that of SC-VDA at the …

Climate Futures 1| Climate Futures, Design And The Just Transition, Schedule, Liberal Arts Division, Ncss Graduate Program

Climate Futures Symposia

Schedule of events distributed at the Symposium.

Investigative Study On Nitric Oxide Production In Human Dermal Fibroblast Cells Under Normal And High Glucose Conditions, Maria Paula Kwesiga, Emily Cook, Jennifer Hannon, Sarah Wayward, Caroline Gwaltney, Smitha Rao, Megan C. Frost

Michigan Tech Publications, Part 1

Diabetic foot ulcers (DFU) are a major health problem associated with diabetes mellitus. Impaired nitric oxide (NO) production has been shown to be a major contributor to the dysregulation of healing in DFU. The level of impairment is not known primarily due to challenges with measuring NO. Herein, we report the actual level of NO produced by human dermal fibroblasts cultured under normal and high glucose conditions. Fibroblasts produce the extracellular matrix, which facilitate the migration of keratinocytes to close wounds. The results show that NO production was significantly higher in normal glucose compared to high glucose conditions. The real-time …

Demonstration Of Monolithic-Silicon Carbide (Sic) Neural Devices, Evans K. Bernardin

USF Tampa Graduate Theses and Dissertations

Brain Machine Interfaces (BMI) provide a communication pathway between the electrical conducting units of the brain (neurons) and external devices. BMI technology may provide improved neurological and physiological functions to patients suffering from disabilities due to damaged nervous systems. Unfortunately, microelectrodes used in Intracortical Neural Interfaces (INI), a subset of the BMI device family, have yet to demonstrate long-term in vivo performance due to material, mechanical and electrical failures. Many state-of-the-art INI devices are constructed using stacks of multiple materials, such as silicon (Si), titanium (Ti), platinum (Pt), parylene C, and polyimide. Not only must each material tolerate the biological …

Cfd Modeling On Hydrodynamic Characteristics Of Multiphase Counter-Current Flow In A Structured Packed Bed For Post-Combustion Co2 Capture, Li Yang, Fang Liu, Kozo Saito, Kunlei Liu

Mechanical Engineering Faculty Publications

Solvent-based post combustion CO₂ capture is a promising technology for industrial application. Gas-liquid interfaces and interactions in the packed bed are considered one of the key factors affecting the overall CO₂ absorption rate. Understanding the hydrodynamic characterizations within packed beds is essential to identify the appropriate enhanced mass transfer technique. However, multiphase counter-current flows in the structured packing typically used in these processes are complicated to visualize and optimize experimentally. In this paper, we aim to develop a comprehensive 3D multiphase, counter-current flow model to study the liquid/gas behavior on the surface of structured packing. The output from …

A Comparative Study Of Defeasible Argumentation And Non-Monotonic Fuzzy Reasoning For Elderly Survival Prediction Using Biomarkers, Lucas Rizzo, Ljiljana Majnaric, Luca Longo

Conference papers

Computational argumentation has been gaining momentum as a solid theoretical research discipline for inference under uncertainty with incomplete and contradicting knowledge. However, its practical counterpart is underdeveloped, with a lack of studies focused on the investigation of its impact in real-world settings and with real knowledge. In this study, computational argumentation is compared against non-monotonic fuzzy reasoning and evaluated in the domain of biological markers for the prediction of mortality in an elderly population. Different non-monotonic argument-based models and fuzzy reasoning models have been designed using an extensive knowledge base gathered from an expert in the field. An analysis of …

Reinforcement Learning-Based Multi-Auv Adaptive Trajectory Planning For Under-Ice Field Estimation, Chaofeng Wang, Li Wei, Zhaohui Wang, Min Song, Nina Mahmoudian

Michigan Tech Publications, Part 1

This work studies online learning-based trajectory planning for multiple autonomous underwater vehicles (AUVs) to estimate a water parameter field of interest in the under-ice environment. A centralized system is considered, where several fixed access points on the ice layer are introduced as gateways for communications between the AUVs and a remote data fusion center. We model the water parameter field of interest as a Gaussian process with unknown hyper-parameters. The AUV trajectories for sampling are determined on an epoch-by-epoch basis. At the end of each epoch, the access points relay the observed field samples from all the AUVs to the …

Stem Roles: How Students’ Ontological Perspectives Facilitate Stem Identities, Dina Verdín, Allison Godwin, Monique Ross

Journal of Pre-College Engineering Education Research (J-PEER)

Educational researchers have explored the importance of performance, recognition, and interest in establishing and maintaining a STEM identity. Research has also demonstrated that the ways students describe themselves and how they participate in STEM communities can provide insight into their role identity salience; however, there has been little work to explore the ontological beliefs of students about STEM people and how this influences their ability to see themselves as possessing a STEM identity. This research explores the ontological beliefs of high school students, with specific attention to the ways in which they describe what constitutes a math person, science person, …

Dynamic Modeling And Analysis Of Propulsion Effect Of 3 Dof Robot, Ahmet Shala, Xhevahir Bajrami

International Journal of Business and Technology

Dynamical Modeling of robots is commonly first important step of Modeling, Analysis and Control of robotic systems. This paper is focused on using Denavit-Hartenberg (DH) convention for kinematics and Newton- Euler Formulations for dynamic modeling of 3 DoF - Degree of Freedom of 3D robot. The process of deriving of dynamical model is done using Software Maple. Simulations are done using Matlab/Simulink for analysis of propulsion effect under Earth gravity when First Link rotates with 1000 rpm, second Link can move free in vertical direction and Third Link can rotates free around their rotations axle. Simulations results shows very good …

Material Balance Adjustement In Raw Material Processing, Migena Hoxha, Piro Zoga, Aida Bode

International Journal of Business and Technology

Circuit of one processing plant was studied in order to adjust the mass balance. The granulometric composition of the streams that belong to grinding and classifying processes was analyzed, while the chemical content was determined only at the streams related to separation process. Three connection matrixes are considered in this paper, one corresponding to the size fraction equations, the second corresponding to the chemical content measurements and the third, the solid flow rate balance. The technique used consisted of filtering all the data by a weighted least-squares procedure. Then running the output data in a custom designed feature of the …

The Effectiveness Of The Use Of Solar Panels In Hotels Of Durres Area, Asllan Hajderi, Shkelqim Gjevori

International Journal of Business and Technology

In the present study is analyzing the case of the application of solar energy with vacuum tube collectors for heating water for sanitary needs in hotels of Durres areas. In recent years there has been a special interest by the leading authorities to the EU countries and the U.S., for the use of renewable energies in general and solar energy in particular. This is mainly related with the reduction of environmental pollution from gas CO2, which directly influences the greenhouse effect and global warming.

Unlike other forms of renewable energy, like wind turbines, photovoltaic panels and biomass usages, the use …

Advancement Of The Plastering Machine, Bujar Ademi, Peter Kopacek

International Journal of Business and Technology

Automation of water flow at plastering machines is a solution which serves the process of plastering, to adhere international standards. Automation of water flow by taking signals from the condition of the material depending on humidity. So its output is used to influence the increase or decrease of the amount of water flow in the valve. Water flow automation is a system which consists of several components in which the already, develop different processes. To release the feedback we need a sensor which is built by piezoelemnt in which we have the phenomenon of the frequency. With which we have …