Engineering Commons^™

The Santa Clara, 2018-11-08, Santa Clara University

The Santa Clara

No abstract provided.

Flight Simulation – What You Need To Know, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1587585) held at Minnesota State University, Mankato Wiecking Center Auditorium at 18:30 CST on Thursday, November 8, 2018.

Semi-Annual Program Progress Performance Report For University Transportation Center Pppr#10, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

The Electric Vehicle Transportation Center (EVTC) supports the U.S. Department of Transportation's strategic goal of planning for near-term integration of alternative fuel vehicles as a means to build a sustainable transportation system. The project objectives are to evaluate technologies, standards, planning and policies to ensure seamless integration of electric vehicles (EVs) into a complex transportation network and electricity grid. The EVTC bridges the gap between deployment of electric vehicles and the traditional transportation system.

Mechanical Engineering As A Career, Scott M. Larwood

All Faculty Presentations - School of Engineering and Computer Science

No abstract provided.

Web-Based Archaeology And Collaborative Research, Fabrizio Galeazzi, Heather Richards-Rissetto

Department of Anthropology: Faculty Publications

While digital technologies have been part of archaeology for more than fifty years, archaeologists still look for more efficient methodologies to integrate digital practices of fieldwork recording with data management, analysis, and ultimately interpretation.This Special Issue of the Journal of Field Archaeology gathers international scholars affiliated with universities, organizations, and commercial enterprises working in the field of Digital Archaeology. Our goal is to offer a discussion to the international academic community and practitioners. While the approach is interdisciplinary, our primary audience remains readers interested in web technology and collaborative platforms in archaeology

Collecting Standards For Scholarship, Organization, Industry, And Innovation, Julia Gelfand, Ibironke Lawal, Jill Powell, Anne Rauh

Librarian Publications

Building on the successful 2017 presentation, A Primer in Science and Engineering Collection Development, this presentation will explore a content type that stumps the engineering librarian and acquisitions librarian alike - standards. Technical standards are documents that establish a uniform practice or process for materials, procedures, and products. Each of us uses standards daily - from USB ports to elevators to lights, automobiles, bridges, standardized train tracks, and much more. Standards are prepared and issued by a professional groups, committees, societies, or governmental agencies, and can influence safety and performance and the role of business and manufacturing.

Four librarians from …

Heart Rate Variability Analysis As A Means Of Real-Time Hypercapnia Detection, Joseph Dituri

USF Tampa Graduate Theses and Dissertations

The motivation for this research is the high prevalence experienced by divers of carbon dioxide (CO₂) issues and concerns throughout their lives. Additionally, CO₂ is naturally occurring, the product of oxidative metabolism, and is undetectable to human senses. Current CO₂ sensor or detection technology is limited to high-cost machines such as arterial blood gas monitors and end tidal CO₂ monitors, or more modern technology relying upon bright lights which measure blood flow. The light technology is notoriously unreliable and does not produce a very effective heart beat allowing a user to detect minimal changes. Heart …

A Multi-Task Approach To Incremental Dialogue State Tracking, Anh Duong Trinh, Robert J. Ross, John D. Kelleher

Conference papers

Incrementality is a fundamental feature of language in real world use. To this point, however, the vast majority of work in automated dialogue processing has focused on language as turn based. In this paper we explore the challenge of incremental dialogue state tracking through the development and analysis of a multi-task approach to incremental dialogue state tracking. We present the design of our incremental dialogue state tracker in detail and provide evaluation against the well known Dialogue State Tracking Challenge 2 (DSTC2) dataset. In addition to a standard evaluation of the tracker, we also provide an analysis of the Incrementality …

Fractionation And Characterization Of Lignin Streams From Unique High-Lignin Content Endocarp Feedstocks, Wenqi Li, Kirtley Amos, Mi Li, Yunqiao Pu, Seth Debolt, Arthur J. Ragauskas, Jian Shi

Biosystems and Agricultural Engineering Faculty Publications

Background: Lignin is a promising source of building blocks for upgrading to valuable aromatic chemicals and materials. Endocarp biomass represents a non-edible crop residue in an existing agricultural setting which cannot be used as animal feed nor soil amendment. With significantly higher lignin content and bulk energy density, endo-carps have significant advantages to be converted into both biofuel and bioproducts as compared to other biomass resources. Deep eutectic solvent (DES) is highly effective in fractionating lignin from a variety of biomass feedstocks with high yield and purity while at lower cost comparing to certain ionic liquids.

Results: In the present …

An Investigation Of Conformality Of The Core-Shell Polymer Electrolyte Membrane (Pem) Fuel Cell Catalysts By Sputter Deposition, Mesut Yurukcu

Theses and Dissertations

Core-shell nanorod array geometry can offer enhanced durability for polymer electrolyte membrane (PEM) fuel cell electrodes if a catalyst shell is conformally coated around the nanorod support base. Uniform catalyst shell coating can minimize the interaction of acidic fuel cell medium with the nanorod base and can improve the overall electrocatalyst electrode stability. However, fabrication of the conformal shell layers on nanorod arrays using physical vapor deposition (PVD) methods (e.g. sputtering, thermal evaporation) has been a formidable task. In order to assess the PVD conditions for the production of conformal shell coatings, Monte Carlo simulation methods (MC) can provide useful …

Carbon-Supported Transition Metal Nanoparticles For Catalytic And Electromagnetic Applications, Kavita Meduri

Dissertations and Theses

Recently, there has been growing interest in using transition metals (TM) for catalytic and electromagnetic applications, due to the ability of TMs to form stable compounds in multiple oxidation states. In this research, the focus has been on the synthesis and characterization of carbon-supported TM nanoparticles (NPs), specifically palladium (Pd) and gold (Au) NPs, for catalytic applications, and transition metal oxides (TMO) NPs, specifically Fe₃O₄ NPs for electromagnetic applications. Carbon supports have several advantages, such as enabling even distribution of particles, offering large specific surface area with excellent electron conductivity, and relative chemical inertness.

In this dissertation, …

A Theoretical And Practical Analysis Of The Effect Of Drilling Fluid On Rebar Bond Strength, Kelly Costello

USF Tampa Graduate Theses and Dissertations

Drilled shafts are large cylindrical cast-in-place concrete structural elements that can be favored due to cost-effectiveness. These elements however, require strict quality control during construction to ensure a stable excavation. Drilling fluid is often used in construction to attain this stability. Drilling fluid, or slurry, can be ground water or salt water, but is typically made from a mixture of water and mineral or polymer powder to form a viscous fluid slightly more dense than ground water. During concreting, the drilling fluid is displaced by the heavier concrete, which is tremie placed at the base of the excavation from the …

The Icarus Floating Membrane Photobioreactor For Microalgae Cultivation In Wastewater: Advancing Technology From Lab To Field Prototype, Melanie Pickett

USF Tampa Graduate Theses and Dissertations

The ICARUS membrane photobioreactor, conceptualized and preliminarily tested at the University of South Florida, provides a viable platform for algae cultivation using wastewater as a growth medium. Progression of the technology is tracked using NASA’s Technology Readiness Level scale, and is herein described. Through the work described in this manuscript, the technology has evolved from TRL 3 to TRL 5. Completing the suggested future work will readily move the technology to TRL 6 and beyond.

The first study investigated the co-location of algal cultivation with wastewater treatment. This coupling provides a steady source of water and nutrients for algal growth. …

Improving The Palatability Of Colonoscopy Preparations, Phuong Anh Hoang Nguyen, Darnell Leon Cuylear, Heather Elizabeth Canavan

Shared Knowledge Conference

Colorectal cancer (CRC) is the second leading cause of cancer-related deaths in the United States. The most reliable screening method of CRC is a colonoscopy which requires a 4-Liter polymer with electrolytes preparation. Two in five patients are non-compliant to their colonoscopy schedules, with many patients who abstain reporting refusal due to significant discomfort associated with this preparation. Furthermore, there are distinct gender differences in the tolerance of colonoscopy preparations in male and female populations. We hypothesize the differences in clinic are a result of toxic effects of the drug associated with poor mixing by individual patients. PEG, the drug, …

An Engineer’S Take On The Bone-Ligament Interface: Utilizing Novel Technology To Improve Clinical Outcomes, Emma Garcia

Shared Knowledge Conference

Ligament repair is a common surgical practice with a significant lack of viable replacements. The current gold standard for repair is the use of tendon grafts from cadavers or from another place in the patient’s body; however, these often cause more problems than they solve including immune responses or a lack of mobility in another place in the body. Synthetic replacements are of growing interest, though the ability to mimic the complex structure of the ligament and how it connects to the bone remains an obstacle. Our lab built a 3D bioprinter combined with an electrospinner to address this complicated …

Evaluation Of A Novel Tool To Diagnose And Treat Alzheimer’S Disease, Adeline Marianne Fanni

Shared Knowledge Conference

More than 5 million Americans are currently suffering from Alzheimer’s disease, an incurable form of dementia characterized by cell brain death. Symptoms are memory loss, behavior changes as well as speech impediment which interfere with daily life. To this date, no efficient diagnostic or therapeutic tools have been successfully developed. Indeed, accurate detection is still challenging with up to 20% misdiagnoses of Alzheimer’s cases. Additionally, the lack of efficient treatment causes one of the highest cost of patient care in the United States ($259 billion for dementia care in 2017). This information highlights the urgent need to develop diagnostic and …

Computational Investigation Of The Interactions Between Bioactive Compounds And Biological Assemblies, Tye D. Martin

Shared Knowledge Conference

Design of small molecules is an ongoing focus for developing agents against pathogenic viruses and bacteria that are threats to worldwide health. Viruses such as Zika feature assemblies of repeat peptide subunits or capsid proteins which are potential targets for antiviral compounds. Other protein assemblies are implicated in pathology of Alzheimer’s Disease (AD) and additional neurodegenerative diseases characterized by large assemblies of misfolded proteins such as amyloid-beta (Aβ) and tau. Recent studies on a class of conjugated polyelectrolytes (CPEs) with phenylene ethynylene moieties and charged functional groups have shown potential both as bioactive antimicrobials and theragnostic sensing agents for tracking …

Controlled Nanomorphology Of Hybrid Organic/Inorganic Multi-Component Composites Through Cooperative Non-Covalent Interactions, Lingyao Meng

Shared Knowledge Conference

Hybrid organic–inorganic nanocomposite polymers, with inorganic nanoparticles embedded in organic matrix have emerged as a special category of multifunctional materials. With rational materials design, these hybrids can show the synergistic effect of the properties from both phases. Homogenous dispersion and orderly arrangement of the organic and inorganic components are key in their functionalities. By controlling the interface and corresponding interfacial interactions between the organic and inorganic entities, we have developed a logical approach to form stable and controlled hybrid nanofiber structures. We demonstrate the formation of hybrid polymer/quantum dots (or iron oxide nanoparticles) nanocomposites through non-covalent interactions (hydrogen bonding, ionic …

Autonomous Vehicle Traffic Impact Scenario Analysis: Central New Mexico Case Study, Razieh Nadafianshahamabadi

Shared Knowledge Conference

Autonomous Vehicles (AVs) are on their way to becoming a significant part of our transportation systems and cities. Previous studies have mainly focused on how much AVs could improve traffic flow and reduce congestion or improve safety. Reducing congestion and the cost of travel time is also expected to increase travel demand, but by how much is not well understood. This study, located in Albuquerque, New Mexico, uses an integrated travel demand and land-use modeling system to evaluate how AVs may affect congestion, travel demand and land use. Our modeling system considers how traffic patterns, travel demand and land use …

3d Bioprinting And Near-Field Electrospinning Composite Scaffolds For The Bone-Ligament Interface, Emma Garcia, Christina Salas, Matthew N. Rush, Christopher Buksa, Marissa Perez, Ava Mauser, Steven Nery, Fermin Prieto, Darielys Morales

Shared Knowledge Conference

3D bioprinting is an additive manufacturing technique that can utilize a range of bioactive materials to construct specific architectures that mimic native tissue. Near-field electrospinning (NFE) offers precise alignment control to create non-woven mats with high tensile strengths. We built a custom E-spin printer that enables layer-by-layer alternating deposition between 3D bioprinting and NFE to create composite scaffolds for the bone-ligament interface. This complex region is difficult to simulate due to its functionally graded mechanical and biochemical properties. We created NFE poly(caprolactone) highly aligned micro-fibers which formed collagen fibril-like bundles. Poly(ethylene glycol) diacrylate with decellularized bone was encased in the …

Radiation Transport In Stochastic Media, Corey Skinner

Shared Knowledge Conference

The need to investigate numerical methods for the transport of radiation (thermal photons, light, neutrons, gammas) in random mixtures of immiscible materials arises in numerous applications, including inertial confinement fusion, turbid media (e.g., skin tissue), stellar atmospheres, clouds, and pebble bed nuclear reactors. Stochastic geometry techniques enable rendering of realizations of such random media and deterministic finite difference/finite element as well as Monte Carlo techniques are used to numerically simulate radiation transport on a large ensemble of realizations. The results are then averaged to obtain statistical moments of the radiation intensity, in particular the mean and variance, to assess the …

Sustainable And Equitable Financing For Pedestrian Infrastructure Maintenance, Alexis Corning Padilla

Shared Knowledge Conference

In many communities, pedestrian infrastructure is discontinuous, inaccessible to those with physical disabilities, and poorly maintained. Correcting these problems would be a first step in providing infrastructure to achieve the active travel and related transportation goals of many communities. One nearly universal challenge to maintaining sidewalks in a state of good repair and addressing environmental justice concerns is an adequate, sustainable and equitable source of funding. Municipal governments across the country maintain and repair their streets and roadways; however, most require residents to maintain and repair public sidewalks adjacent to their property. These policies are difficult to enforce and may …

Demand Response Management In Smart Grid Networks: A Two-Stage Game-Theoretic Learning-Based Approach, Pavlos Athanasios Apostolopoulos

Shared Knowledge Conference

In this paper, the combined problem of power company selection and demand response management (DRM) in a smart grid network consisting of multiple power companies and multiple customers is studied via adopting a reinforcement learning and game-theoretic technique. Each power company is characterized by its reputation and competitiveness. The customers, acting as learning automata select the most appropriate power company to be served, in terms of price and electricity needs’ fulfillment, via a reinforcement learning based mechanism. Given customers’ power company selection, the DRM problem is formulated as a two-stage game theoretic optimization framework. At the first stage the optimal …

Genetic Algorithm Design Of Photonic Crystals For Energy-Efficient Ultrafast Laser Transmitters, Troy A. Hutchins-Delgado

Shared Knowledge Conference

Photonic crystals allow light to be controlled and manipulated such that novel photonic devices can be created. We are interested in using photonic crystals to increase the energy efficiency of our semiconductor whistle-geometry ring lasers. A photonic crystal will enable us to reduce the ring size, while maintaining confinement, thereby reducing its operating power. Photonic crystals can also exhibit slow light that will increase the interaction with the material. This will increase the gain, and therefore, lower the threshold for lasing to occur. Designing a photonic crystal for a particular application can be a challenge due to its number of …

Comparison Of Steady And Transient Flow Boiling Critical Heat Flux (Chf) For Fecral Accident Tolerant Fuel Cladding Alloy, Zircaloy, And Inconel, Soon Kyu Lee

Shared Knowledge Conference

The nuclear reactor design focuses on building a system that is robust and reliable, is efficient and economical, and do not run into undesirable transient accident scenarios. The nuclear reactor safety focuses on ensuring the system operation under the safety margins and requirements provided by the regulatory agencies. Following the Fukushima nuclear reactor accident, the US Department of Energy Office of Nuclear Energy (DOE-NE) Advanced Fuels Campaign (AFC) is working to develop fuel and cladding candidates with potentially enhanced accident tolerance: ‘Advanced Tolerant Fuel’ (ATF). As a part of the AFC, this research focuses on gaining mechanistic understanding of the …

Use Of High Fidelity Fission Models In Criticality Calculations, Daniel H. Timmons

Shared Knowledge Conference

The use of Monte Carlo, random number sampling, for neutron transport has been used for about half a century. There are many benchmarks that have been used to validate neutronics codes, mostly for critical systems. Critical systems are systems where the neutron population from one generation to the next is the same. Subcriticality is when there are less neutrons in the next generation and supercriticality is when there are more neutrons in the next generation than there were in the previous. To calculate criticality, a set number of neutrons are started in a system. Those neutrons interact and the number …

End-To-End Deep Learning Systems For Scene Understanding, Path Planning And Navigation In Fire Fighter Teams, Manish Bhattarai

Shared Knowledge Conference

Firefighting is a dynamic activity with many operations occurring simultaneously. Maintaining situational awareness, defined as knowledge of current conditions and activities at the scene, are critical to accurate decision making. Firefighters often carry various sensors in their personal equipment, namely thermal cameras, gas sensors, and microphones. Improved data processing techniques can mine this data more effectively and be used to improve situational awareness at all times thereby improving real-time decision making and minimizing errors in judgment induced by environmental conditions and anxiety levels. This objective of this research employs state of the art Machine Learning (ML) techniques to create an …

Optimal Attitude Control Of A Two-Cubesat Virtual Telescope In A Highly Elliptical Orbit, Reza Pirayeshshirazinezhad

Shared Knowledge Conference

This paper investigates a novel approach for attitude control of 2 satellites acting as a virtual telescope. The Virtual Telescope for X-ray Observations (VTXO) is a mission exploiting 2 6U-CubeSats operating in a precision formation. The goal of the VTXO project is to develop a space-based, X-ray imaging telescope with high angular resolution precision. In this scheme, one CubeSat carries a diffractive lens and the other one carries an imaging device to support a focal length of 100 m. In this mission, the attitude control algorithms are required to keep the two spacecraft in alignment with the Crab Nebula observations. …

Pulsed Fiber Optics Lasers As Highly Sensitive Sensors, Hanieh Afkhamiardakani

Shared Knowledge Conference

An interferometer or resonator is a device in which optical beams of specific frequencies circulate with minimal losses. These losses are completely compensated by the gain inside a laser resonator. A small perturbation introduced inside the laser can affect its frequency, which in turns becomes a metric of that perturbation. The perturbation is usually caused by an electric or magnetic field, rotation, acceleration, nonlinear index of refraction etc. Tiny changes of optical frequency are monitored by superimposing the laser field and a reference field (from the same laser) on a detector. This technique requires creating a laser in which two …

Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti

Shared Knowledge Conference

Ultrasonic monitoring in cementitious materials is challenging due to the high degree of attenuation. In wellbore environments, monitoring becomes more challenging due to inaccessibility. Meta materials, also known as acoustic bandgap materials, exhibit an interesting feature of forbidding the propagation of elastic/sound waves and isolate vibration in a certain frequency band. Traditionally, acoustic bandgap materials are developed with inclusions such as tin, aluminum, gold, steel in a polymer matrix. In this study, we present the development of three-dimensional cementitious sensors capable of exhibiting stopbands in the acoustic transmission spectra using carbon nanotubes. Relatively wide stopbands were engineered using Floquet-Bloch periodic …