Engineering Commons^™

Scenarios For Adoption Of Autonomous Vehicle Technologies In Freight, Sabya Mishra

PSU Transportation Seminars

Innovation adoption research has largely ignored organizational adoption, and little work has been done to understand or predict the adoption of innovations by freight organizations. Among the existing innovation adoption theoretical and methodological approaches this seminar will explore which are most appropriate methods for freight organizational adoption. The seminar will present a disaggregate market penetration model for freight transportation organizations adopting connected autonomous vehicle (CAV) technology and demonstrate an application using a case study area in Memphis, TN. The seminar will highlight ongoing and future organizational adoption research for CAVs, and other innovations.

Numerical Modeling Of Concrete Flow In Drilled Shaft, Jesudoss Asirvatham Jeyaraj

USF Tampa Graduate Theses and Dissertations

Drilled shafts are cylindrical, cast-in-place concrete deep foundation elements. Their construction involves drilled excavation of soil or rock using large diameter augers, and placement of the necessary reinforcing steel in the excavation followed by concreting. Where a high water table is encountered, drilling slurry is used to support the excavation walls and concreting is tremie-placed. Even though the history of drilled shaft construction goes back to the 1950s, the occurrence of anomalies persists in the form of soil inclusions, reduction in shaft cross-sectional area and exposure of reinforcement. One of the main reasons for the anomalies is attributed to the …

Pursuing Resilience Of Coastal Communities Through Sustainable And Integrated Urban Water Management, Pacia Díaz

USF Tampa Graduate Theses and Dissertations

Reliability of water supply in the urban setting has become essential for communities to function and thrive. It is needed for more than mere human consumption and well-being. Although modern cities have water treatment and distribution systems, pressures from urbanization, population growth and the anticipated pressures of climate change are affecting the quality of water supply and the reliability of treatment and distribution systems. There is therefore an urgent need to take appropriate measures to improve the resilience of water supply systems before the impacts are irreversible.

Improving the resilience of water supply systems can be a challenge. In the …

Smart Disease Prevention App: Informing The Public In Their Own Geographic Location, Apoorva Sulakhe, Shafali Rana, Zoe Disori, William Nogay, Kyle Plummer, Meredith Shannon, Morgan Young, Alyssa Zielinski, Vincent G. Duffy

Purdue Journal of Service-Learning and International Engagement

Apoorva Sulakhe and Shefali Rana are graduate students in the School of Industrial Engineering at Purdue. They have both been teaching assistants under their coauthor, Dr. Vincent Duffy, while supervising multiple projects. Coauthors Zoe Disori, William Nogay, Kyle Plummer, Meredith Shannon, Morgan Young, and Alyssa Zielinski are listed in alphabetical order. They were all seniors in School of Industrial Engineering at the time of this project in 2017. The purpose of their study, described in this article, was to develop an application to provide users with accurate information about diseases spreading in their geographic locations.

Engineering Success On The Field: A Reflection On The Epics Ironman Pediatric Prosthetic Project, Glynn Gallaway

Purdue Journal of Service-Learning and International Engagement

Glynn Gallaway is a student in the Purdue Mechanical Engineering Class of 2020 with interests in the health care, assistive technology, and medical device industries. Glynn is from Dallas, Texas, and was inspired to pursue this career path through her interactions with youth with special needs. She joined the EPICS Ironman team in the fall of 2016 during her first year at Purdue as a part of the learning community. In this article, she discusses her experiences on the Ironman team creating a pediatric prosthetic for a young local athlete. The goal of the Ironman team is to create a …

Habitat For Humanity: A Student-Led Service Trip To Thailand, Amber Reiff

Purdue Journal of Service-Learning and International Engagement

Amber Reiff started volunteering with Habitat for Humanity in high school and joined the Purdue Student Chapter as a freshman in 2014. During her sophomore year, she became more involved and held the position of Vice President of Development. While serving in this role, she planned on-campus advocacy events and recruited volunteers for Saturday site builds. In 2017, she traveled to Lampang, Thailand, over spring break with a group of like-minded students striving to make a difference. In this article, she shares her experiences on this trip and explores the impact of her participation. Beyond this trip, she has continued …

Transcribing Braille Code: Learning Equations Across Platforms, Deegan Atha, Courtney Balogh

Purdue Journal of Service-Learning and International Engagement

Deegan Atha, a graduating senior in electrical engineering and a future engineer, is interested in human-centered design and developing technology that helps students engage and be successful in STEM.

Courtney Balogh, a junior in mechanical engineering, is interested in human-centered design and the importance it plays in product development. Deegan and Courtney are members of the Purdue EPICS project, Learning Equations Across Platforms (LEAP). They partnered with the Indiana School for the Blind and Visually Impaired (ISBVI) to develop a braille transcription device and web application that converts braille to print in real time.

The Development Of Hybrid Lipid-Polymer Nanoparticle Architectures For The Sustained-Release Of Small Hydrophilic Molecules, Keegan Curry, Jill M. Steinbach-Rankins Dr.

Posters-at-the-Capitol

Introduction: Polymeric nanoparticles (NPs) have been utilized as drug delivery vehicles for a variety of applications. However, achieving sustained-release of small hydrophilic agents is a primary challenge for their use in prolonged delivery applications.

Objective: This study investigates how novel lipid-polymer hybrid particle architectures can be used to improve the release profile of small hydrophilic encapsulants. Here, PLGA NPs were produced via electrospraying and emulsions. Particles with a core-shell architecture were produced via coaxial electrospraying and the ability of this architecture to sustain release was examined. In addition, we combined polymeric core-shell NPs with a lipid coating to improve biocompatibility, …

Advances In Automotive Conversion Coatings During Pretreatment Of The Body Structure: A Review, Mark Doerre, Larry Hibbitts, Gabriela Patrick, Nelson K. Akafuah

Institute of Research for Technology Development Faculty Publications

Automotive conversion coatings consist of layers of materials that are chemically applied to the body structures of vehicles before painting to improve corrosion protection and paint adhesion. These coatings are a consequence of surface-based chemical reactions and are sandwiched between paint layers and the base metal; the chemical reactions involved distinctly classify conversion coatings from other coating technologies. Although the tri-cationic conversion coating bath chemistry that was developed around the end of the 20th century remains persistent, environmental, health, and cost issues favor a new generation of greener methods and materials such as zirconium. Environmental forces driving lightweight material selection …

A Validation Study Of Time Series Data Forecasting Using Neural Networks, Marco Martinez, Jeremy Evert

Student Research

Artificial Intelligence(AI) is a growing topic in Computer Science and has many uses in real world applications. One application is using Al, or more specifically Neural Networks to model data and predict outcomes. Neural Networks have been used in the past to predict weather changes, create facial recognition software , and to create self-driving cars. Our project is a validation study of, “Modeling Time Series Data With Deep Fourier Neural Networks” by Gashler and Ashmore, 2016. Here we show that a neural network can be trained to be an effective predictor of weather patterns in Alaska over several years. Our …

Cost Benefit Analysis Of Led Vs Florescent Lighting, Kurtis Clark, Phillip Humphrey

Student Research

Over the last few years, the state of Oklahoma has been looking at ways to reduce expenses to address concerns about a budget deficit. There have been efforts made to reduce expenses due to the use of energy. It has been said, when the lights are on, work is getting done. Running lights is therefore the cost of doing business. Our research examines the question, “is there a way to provide better lighting while operating at a lower cost.” This research examines the current lighting at Southwestern State University, primarily fluorescent lighting (FL), and a cost benefit analysis of switching …

Effect Of Cross-Section-Change Induced Advective Flow On The Primary Dendrite Array Morphology Of Hypoeutectic Pb-Sb Alloys During Directional Solidification, K. Pandit, S. R. Upadhyay, Surendra N. Tewari

Chemical & Biomedical Engineering Faculty Publications

The morphology and distribution of primary dendrites have been examined in Pb-2.2, 5.8 and 10.8 wt. pct. Sb alloy samples directionally solidified (DSed) in ampoules shaped like an hour-glass to examine the influence of cross-section change induced advective flow on the cellular/dendritic interface. This sample design increases the advective flow of the melt towards the array tips, as the liquid-solid interface enters the neck of the ampoule, and then decreases it as the interface exits the neck. The warm solute-rich melt flowing towards the growth front suppresses the extent of side-branching, decreases the primary dendrite spacing, and increases the primary …

Programmable Time-Domain Digital-Coding Metasurface For Non-Linear Harmonic Manipulation And New Wireless Communication Systems, Jie Zhao, Xi Yang, Jun Yan Dai, Qiang Cheng, Xiang Li, Ning Hua Qi, Jun Chen Ke, Guo Dong Bai, Shuo Liu, Shi Jin, Andrea Alù, Tie Jun Cui

Publications and Research

Optical non-linear phenomena are typically observed in natural materials interacting with light at high intensities, and they benefit a diverse range of applications from communication to sensing. However, controlling harmonic conversion with high efficiency and flexibility remains a major issue in modern optical and radio-frequency systems. Here, we introduce a dynamic time-domain digital-coding metasurface that enables efficient manipulation of spectral harmonic distribution. By dynamically modulating the local phase of the surface reflectivity, we achieve accurate control of different harmonics in a highly programmable and dynamic fashion, enabling unusual responses, such as velocity illusion. As a relevant application, we propose and …

Frameworks To Investigate Robustness And Disease Characterization/Prediction Utility Of Time-Varying Functional Connectivity State Profiles Of The Human Brain At Rest, Anees Abrol

Electrical and Computer Engineering ETDs

Neuroimaging technologies aim at delineating the highly complex structural and functional organization of the human brain. In recent years, several unimodal as well as multimodal analyses of structural MRI (sMRI) and functional MRI (fMRI) neuroimaging modalities, leveraging advanced signal processing and machine learning based feature extraction algorithms, have opened new avenues in diagnosis of complex brain syndromes and neurocognitive disorders. Generically regarding these neuroimaging modalities as filtered, complimentary insights of brain’s anatomical and functional organization, multimodal data fusion efforts could enable more comprehensive mapping of brain structure and function.

Large scale functional organization of the brain is often studied by …

Structural Transformations In Porous Glasses Under Mechanical Loading. Ii. Compression, Nikolai V. Priezjev, Maxim A. Makeev

Mechanical and Materials Engineering Faculty Publications

The role of porous structure and glass density in response to compressive deformation of amorphous materials is investigated via molecular dynamics simulations. The disordered, porous structures were prepared by quenching a high-temperature binary mixture below the glass transition into the phase coexistence region. With decreasing average glass density, the pore morphology in quiescent samples varies from a random distribution of compact voids to a porous network embedded in a continuous glass phase. We find that during compressive loading at constant volume, the porous structure is linearly transformed in the elastic regime and the elastic modulus follows a power-law increase as …

Criticality Assessments For Improving Algorithmic Robustness, Thomas B. Jones

Computer Science ETDs

Though computational models typically assume all program steps execute flawlessly, that does not imply all steps are equally important if a failure should occur. In the "Constrained Reliability Allocation" problem, sufficient resources are guaranteed for operations that prompt eventual program termination on failure, but those operations that only cause output errors are given a limited budget of some vital resource, insufficient to ensure correct operation for each of them.

In this dissertation, I present a novel representation of failures based on a combination of their timing and location combined with criticality assessments---a method used to predict the behavior of systems …

Scalable, Biofunctional, Ultra-Stable Nano- Bio- Composite Materials Containing Living Cells, Patrick E. Johnson, C. Jeffrey Brinker, Graham Timmins, Jacob Agola, Jason Harper

Nanoscience and Microsystems ETDs

Three-dimensional encapsulation of cells within nanostructured silica gels or matrices enables applications as diverse as biosensors, microbial fuel cells, artificial organs, and vaccines. It also allows study of individual cell behaviors. Recent progress has improved the performance and flexibility of cellular encapsulation, yet there remains a need for robust scalable processes for large format production of cell-encapsulating materials. Here, we detail two novel techniques, that enable the large-scale production of functional Nano-Bio-Composites (NBCs) containing living cells within ordered 3-D lipid/silica nanostructures: 1) thick-casting and 2) spray drying. Furthermore, we detail a third technique for material scaling in which aqueous, silicate-based …

Vertical Transport Study Of Iii-V Type-Ii Superlattices, Zahra Taghipour

Optical Science and Engineering ETDs

Type-II strained layer superlattice (T2SL) semiconductors hold great promise for mid- and long-wavelength infrared photodetectors. While T2SL-based materials have advanced significantly in the last three decades, an outstanding challenge to improve the T2SLs is to understand the carrier transport and its limitations, in particular along the superlattice growth layers.

In this dissertation, an overview of the current state-of-the-art InAs/GaSb T2SLs is presented. Fundamental semiconductor device equations and transport properties, including miniband conduction and the drift-diffusion parameters, are reviewed, and the fundamental limiting factors in carrier's transport are discussed. Furthermore, the standard method of electron-beam-induced current technique to measuring these parameters …

Investigation Of The Formation Of Γꞌꞌ Precipitates Under Ion Irradiation And Elevated Temperature Environments, James R. Pike

Nuclear Engineering ETDs

During a preventative maintenance at the Los Alamos Neutron Science Center (LANSCE) Isotope Production Facility (IPF), a beam window made of solution annealed Alloy 718 was replaced and the old beam window was analyzed. The old beam window underwent mechanical testing and microstructure analysis. During the microstructure analysis, the formation of γꞌꞌ precipitates was observed in Transmission Electron Microscopy (TEM) electron diffraction pattern. The formation of γꞌꞌ precipitates was not expected since they are not stable under irradiation. Furthermore, the formation of γꞌꞌ precipitates was observed only at a temperature of 33ºC, and a dose of 0.7 displacement per atom …

Apparatus, Methods And Systems For Fabricating Thin Nanoporous Membranes, Sankar Nair, Jeffrey H. Drese, Kiwon Eum, Ryan P. Lively, Ali A. Rownaghi, Yash Tamhankar, Shaowei Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Embodiments of the present disclosure provide apparatuses, methods and systems for scalable fabrication of thin, nanoporous membranes useful in industrial applications. One embodiment of the present disclosure provides a molecular separation device configured to efficiently separate molecular species. In this particular embodiment, porous hollow fibers form a supporting scaffold for synthesis of a molecular organic framework (MOF) membrane. The MOF membrane may be synthesized on the inner or outer porous hollow fiber surface as well as within the porous fiber wall. Embodiments of the present disclosure provide a variety of methods for producing the aforementioned molecular separation devices as well …

Scalable Stochastic Reachability: Theory, Computation, And Control, Abraham Puthuvana Vinod

Electrical and Computer Engineering ETDs

Guaranteeing safety and performance are crucial components in any control system, and particularly relevant in light of growing interest in reliable autonomy. In safety-critical applications like biomedical devices, spacecraft applications, and self-driving cars, the cost of failure can be severe. Verification provides these guarantees by characterizing the ``good'' initial states or configurations from which a state can be driven to remain within a collection of pre-specified safe sets, while respecting the system dynamics, bounds on control authority, and additive uncertainties. We also wish to design controllers to achieve this objective. This dissertation proposes novel theory and scalable algorithms for tractable …

Exposure Assessment Of Citizens To Traffic Related Air Pollutants In A Long-Range Transportation Plan, Amir Poorfakhraei

Civil Engineering ETDs

A large body of evidence links fine particulate matter (PM_2.5) exposure with a wide range of negative health outcomes. Research finds that about 30% of individuals’ exposure to particulate matter in urban areas come from mobiles sources. Evaluating regional transportation plans and estimating how they impact air quality and exposure to PM_2.5 in the future is thus of major concern.

There are two major concerns about the current practice of evaluating regional transportation plans also known as long-range transportation plans (LRTPs). First, how LRTPs affect future air quality are at best evaluated by estimating the change in …

Frequency Response Of The Leap Motion Controller And Its Suitability For Measuring Tremor, Clay J. Kincaid, Austin C. Vaterlaus, Nathan R. Stanford, Steven Knight Charles

Faculty Publications

Although tremor is one of the most common movement disorders, it is evaluated using relatively coarse clinical scales. We propose to measure tremor in clinical settings using the Leap Motion Controller (LMC), which is a markerless motion capture sensor that has a low cost, zero set-up time, and dynamic accuracy of 1.2mm. However, the frequency response of the LMC has not been characterized, so its ability to track oscillations such as tremor is unknown. To characterize the frequency response of the LMC, we measured the position of a mannequin hand simultaneously with the LMC and a high-resolution encoder while the …

Improving Early-Age Cracking Resilience And Durability Of Concrete Elements, Ananya Markandeya

USF Tampa Graduate Theses and Dissertations

Control of early-age cracking in concrete structures due to restrained deformation, thermal and/or autogenous, presents a major durability challenge for state highway agencies. This study details research conducted on improving the early-age cracking resilience of plain concrete and supplementary cementitious materials (SCM) blended concrete. Three specific areas, within concrete structural elements, with high incidence of early-age cracking are addressed:

• High early-age strength (HES) concrete mixtures used in slab-replacement of Jointed Plain Concrete Pavements (JPCP)
• Use of metakaolin (MK) in bridge deck mixtures
• Use of slag blended concrete, at high cement replacement levels, in massive structural elements

Three cracking mitigation measures …

Materials And Methods To Fabricate Porous Structures Using Additive Manufacturing Techniques, Mohsen Ziaee

USF Tampa Graduate Theses and Dissertations

Additive Manufacturing (AM), as the name implies, produces three-dimensional objects by progressively adding material rather than cutting away unneeded material. Typically this is done by processing a series of cross-sections obtained from a Computer Aided Design (CAD) model of the object. AM systems can process liquid photopolymers and solid materials in form of powder, wire and laminates to create intricate geometries in a short lead time.

This superb capability of AM methods enables to locally suit the properties of the part for the desired function by incorporating the designed pores in the CAD model [2]. The pore gradient creation opens …

Prediction Of Metal Sample Failure From Scanning Electron Microscope Images Using Deep Learning Neural Network, Lawrence Madriaga, Ivan Novikov, Morteza Nurcheshmeh

Posters-at-the-Capitol

We present the preliminary results on using a deep learning neural network to predict a metal sample failure based on a set of images obtained with a Scanning Electron Microscope.

Various metal alloy samples were prepared according to ASTM E8/E8M-11 standards for a tensile test. Each sample was prepared for circle grid analysis and then stressed on a tensile machine. Stress and strain values were obtained for each position along the sample by measuring dimensions of each elongated circle. Increasing stress and strain values were found closer to the breakage of the sample with low values found at the holding …

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore

Posters-at-the-Capitol

Piezoelectric materials have the unique ability to convert electrical energy to mechanical vibrations and vice versa. This project takes a stab to develop a reliable computational tool to simulate the vibration control of a novel “partial differential equation” model for a piezoelectric device, which is designed by integrating electric conducting piezoelectric layers constraining a viscoelastic layer to provide an active and lightweight intelligent structure. Controlling unwanted vibrations on piezoelectric devices (or harvesting energy from ambient vibrations) through piezoelectric layers has been the major focus in cutting-edge engineering applications such as ultrasonic welders and inchworms. The corresponding mathematical models for piezoelectric …

3d Wi-Fi Campus Coverage: Flying A Drone, Richard Thompson, Tyler Williams, Seth Pritchett, Tracy Whitlock

Posters-at-the-Capitol

Everyone in a college environment is immersed in their electronic devices. Whether it be in the quad, the classroom, the library or their favorite nook by the windows, they all need a reliable Wi-Fi signal to get their work done. In this era most of the tasks that has to be completed require some sort of connection between electronic devices especially if the individuals require information located on the internet. The main method of accessing the internet is using Wifi technology which uses electromagnetic waves to propagate information across a certain area. Considering the properties of these electromagnetic frequencies it …

Online Course Preperation - 101: Summary Of Online Course Certification Training, Albena Yordanova

ASEE Best Practice Series Presentations

No abstract provided.

A Study On The Adaptability Of Immune System Principles To Wireless Sensor Network And Iot Security, Vishwa Alaparthy

USF Tampa Graduate Theses and Dissertations

Network security has always been an area of priority and extensive research. Recent years have seen a considerable growth in experimentation with biologically inspired techniques. This is a consequence of our increased understanding of living systems and the application of that understanding to machines and software. The mounting complexity of telecommunications networks and the need for increasing levels of security have been the driving factor. The human body can act as a great role model for its unique abilities in protecting itself from external, foreign entities. Many abnormalities in the human body are similar to that of the attacks in …