Engineering Commons^™

Cfd Modeling Of Aerial Dispersion Of Pollutants In Urban Environments, Alec Tauer

Master's Theses (2009 -)

Population growth and urbanization across the globe is contributing to anincrease in air pollution emissions. Because air pollution can negatively impact public health there is a desire to model the aerial dispersion of the pollutants in urban environments. Computational Fluid Dynamics (CFD) is becoming an increasingly common tool used to provide high spatial and temporal resolution of the wind flow and pollutant transport in urban environments. In the present study, CFD is utilized to model the aerial pollutant dispersion in three domains: a flat field, an idealized urban environment, and a real urban environment neighboring the Jones’ Island Water Reclamation …

Diffuse Reflectance Spectroscopy For The Evaluation Of Mid-Palatal Suture Maturation After Expansion, Binhuan Yuan

Master's Theses (2009 -)

Diffuse reflectance spectroscopy (DRS) is a technique for characterizing the optical properties of biological tissues and has been extensively studied for diagnosis and therapeutic monitoring of various diseases. This thesis investigates the potential use of DRS for the evaluation of mid-palatal suture maturation after expansion. The most common evaluation technique for palatal expansion is Computed Tomography (CT). The major issue with CT is that during serial radiological scanning, patients are repeatedly exposed to ionizing radiation. DRS is a non-invasive, non-ionizing method which can be used to quantify the tissue optical properties in the visible wavelength in vivo. This study demonstrates …

Accuracy And Computational Cost Assessment Of Radiation Solvers For Combustion Simulations, Chloe David

Master's Theses (2009 -)

High-fidelity combustion simulations necessitate the accurate and efficient calculation of radiative heat transfer. A successful radiation calculation requires the use of a spectral model, which describes the variation of radiative properties across the entire electromagnetic spectrum, and a radiative transfer equation (RTE) solver, which solves the governing equation for radiation transport. Three primary categories of RTE solvers are the discrete ordinates method (DOM), the spherical harmonics method (SHM), and the photon Monte Carlo (PMC) method. The accuracy and computational cost of each type of RTE solver is compared in detail in this work. The PMC RTE solver is considered the …

The Development And Implementation Of A Virtual Reality-Based Radiation Therapy Education And Anxiety Mitigation Program, Sophia Shanahan

Master's Theses (2009 -)

Radiation therapy (RT) is commonly used in the treatment of breast cancer. According to the literature, RT is an unknown to many patients and can be a source of anxiety and fear. Towards that end, a virtual reality (VR) education program was developed that leverages head-mounted display technology to virtually place a patient in immersive representations of a CT simulation suite, dosimetry room, and treatment room that mimic the actual clinical spaces associated with RT. A virtual model of a radiation oncologist “meets” the patient in each environment and provides verbal narration. In the treatment environment, the patient is able …

Laboratory-Scale Research Of Non-Catalyzed Supercritical Alcohol Process For Continuous Biodiesel Production, Aso A. Hassan, Joseph D. Smith

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work investigates the non-catalyzed supercritical methanol (SCM) process for continuous biodiesel production. The lab-scale setup was designed and used for biodiesel production in the temperature range of 520–650 K and 83–380 bar with an oil-to-methanol molar ratio ranging from 1:5 to 1:45. The experiments were performed in the coiled plug flow tubular reactor. The volumetric flow rate of the methanol/oil ranged from 0.1-10 mL/min. This work examines a new reactor technology involving preheating and pre-mixing of the methanol/oil mixture to reduce setup cost and increase biodiesel yield under the same reaction conditions. Work performed showed that FAME’s yield increased …

Understanding And Avoiding Ai Failures: A Practical Guide., Robert Max C Williams

Electronic Theses and Dissertations

As AI technologies increase in capability and ubiquity, AI accidents are becoming more common. Based on normal accident theory, high reliability theory, and open systems theory, we create a framework for understanding the risks associated with AI applications. In addition, we also use AI safety principles to quantify the unique risks of increased intelligence and human-like qualities in AI. Together, these two fields give a more complete picture of the risks of contemporary AI. By focusing on system properties near accidents instead of seeking a root cause of accidents, we identify where attention should be paid to safety for current …

Santa Clara Community Garden Composter Device, Nick Buccino, Kyle Uyehara, Jay Weber

Interdisciplinary Design Senior Theses

Although studies show that people understand the negative effects of organic waste thrown into landfills, few take steps to help reduce the amount of methane pumped into the environment by composting their food scraps, garden waste, grass clippings, etc. Composting meets with resistance because it actually encompasses a complicated combination of factors and processes that involves knowledge, attention, and manual labor to perform correctly. Composting done improperly results in offensive odors such as ammonia and rotten eggs, a sloppy mess of half-decomposed raw materials, and an abundance of pests such as flies, racoons, and skunks. Individuals, communities, and cities often …

Preferential Vaporization Potential Of Crude Oils And Its Impact On Flame Flashback Behaviors, Ayuob Al Wahaibi

Theses and Dissertations

As combined cycle gas turbines for power generation operating on light distillate fuels provide a sufficient energy, there is a global trend in using heavy liquids (e.g. HFO, crude oils) for direct-firing in gas turbine. However, using these heavy fuels imposes many challenges due to their wide range of physical/chemical properties, which control near-limit combustion behaviors, such lean blow-out and flashback. In addition, the ignition propensity of these heavy fuels is not reported in crude assays, and utilizing a simple, with small sample, and quick methodology to characterize the ignition propensity is important in determining the fuel quality.

In this …

Polymer Microparticles For Encapsulation And Presentation Of Anti-Inflammatory Agents For Inflammatory Diseases, Christopher Isely

Theses and Dissertations

Inflammatory diseases have a huge economic impact on the healthcare system. Incidence of obesity and muscle atrophy, two high profile inflammatory diseases, continues to increase. Anti-inflammatory agents are potential therapeutics for these diseases. Resveratrol is a polyphenol that has anti-inflammatory effects; however, resveratrol suffers from low bioavailability and hasn’t had impressive clinical results when delivered orally. Mannose is a monosaccharide that also has anti-inflammatory effects, however, effects are highest when mannose is presented on the surface of a support the size of a bacteria. Incorporation of resveratrol and mannose into biodegradable polymer microparticles could be a feasible approach to overcome …

Defining The Pathophysiology Of Gut Humoral Immunodeficiency, Ahmed Dawood Mohammed

Theses and Dissertations

Mucosal antibodies maintain gut homeostasis by promoting spatial segregation between host tissues and luminal microbes. Antibody-deficiency is the most common form of primary immunodeficiency observed in humans. In antibody-deficient humans, abnormal composition of the gut microbiota ('dysbiosis') is associated with chronic inflammatory responses and gastrointestinal complications. However, the mechanisms by which dysbiosis promotes inflammatory disease are poorly defined. In the studies described in this dissertation, we utilize CD19-/- mice as a model of antibody deficiency to test the hypothesis that antibody deficiency negatively impacts gut physiology under steady-state conditions. Chapter #1 is an overview of B cell development and how …

Anisotropic Scaffolds For Peripheral Nerve And Spinal Cord Regeneration, Wen Xue, Wen Shi, Yunfan Kong, Mitchell Kuss, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

The treatment of long-gap (>10 mm) peripheral nerve injury (PNI) and spinal cord injury (SCI) remains a continuous challenge due to limited native tissue regeneration capabilities. The current clinical strategy of using autografts for PNI suffers from a source shortage, while the pharmacological treatment for SCI presents dissatisfactory results. Tissue engineering, as an alternative, is a promising approach for regenerating peripheral nerves and spinal cords. Through providing a beneficial environment, a scaffold is the primary element in tissue engineering. In particular, scaffolds with anisotropic structures resembling the native extracellular matrix (ECM) can effectively guide neural outgrowth and reconnection. In …

Internet Of Things Based Messaging Protocols For Aquaculture Applications - A Bibliometric Analysis And Review, Rupali Shete, Anupkumar M. Bongale Dr., Arunkumar Bongale Dr.

Library Philosophy and Practice (e-journal)

Internet of Things (IoT) which connects real-world physical objects with various identities involves different technologies and research areas. As it is an integration of different standards and technologies with numerous capabilities, the implementation phase needs to consider important parameters of communication. In IoT this is achieved through messaging protocols. Each object has its own limitations in terms of sensing capability, storage capacity, connectivity, power utilization, etc. And hence when such objects are deployed for different applications, they need to perform well in terms of their various capabilities. Messaging protocols at this stage need to consider these diverse elements. One of …

Hydrothermal Synthesis And Structural Investigation Of A Crystalline Uranyl Borosilicate, Kristen A. Pace, Vladislav V. Klepov, Mark D. Smith, Travis Williams, Gregory Morrison, Jochen A. Lauterbach, Scott T. Misture, Hans Conrad Zur Loye

Faculty Publications

The relevance of multidimensional and porous crystalline materials to nuclear waste reme-diation and storage applications has motivated exploratory research focused on materials discovery of compounds, such as actinide mixed-oxoanion phases, which exhibit rich structural chemistry. The novel phase K1.8 Na1.2 [(UO2)BSi4 O12 ] has been synthesized using hydrothermal methods, rep-resenting the first example of a uranyl borosilicate. The three-dimensional structure crystallizes in the orthorhombic space group Cmce with lattice parameters a = 15.5471(19) Å, b = 14.3403(17) Å, c = 11.7315(15) Å, and V = 2615.5(6) Å3, and is composed of UO6 octahedra linked by [BSi4 O12 ]5− chains to …

Signatures Of Vibrational And Electronic Quantum Beats In Femtosecond Coherence Spectra, Paul C. Arpin, Daniel B. Turner

Materials Science and Engineering Faculty Publications and Presentations

Femtosecond laser pulses can produce oscillatory signals in transient-absorption spectroscopy measurements. The quantum beats are often studied using femtosecond coherence spectra (FCS), the Fourier domain amplitude, and phase profiles at individual oscillation frequencies. In principle, one can identify the mechanism that gives rise to each quantum-beat signal by comparing its measured FCS to those arising from microscopic models. To date, however, most measured FCS deviate from the ubiquitous harmonic oscillator model. Here, we expand the inventory of models to which the measured spectra can be compared. We develop quantum-mechanical models of the fundamental, overtone, and combination-band FCS arising from harmonic …

Behavior Of Steel Fiber-Reinforced Geopolymer Concrete Made With Recycled Concrete Aggregates, Abdalla Ahmed Moallim Hussein

Theses

Industrial by-products and recycled concrete aggregates (RCA) have the potential to fully replace cement and natural aggregates, respectively, in the production of concrete rather than being discarded wastefully into landfills or stockpiles. Yet, their combined use in the development of a novel RCA geopolymer concrete has been limited to nonstructural purposes, owing to the inferior mechanical and durability properties of said concrete. To improve the properties of geopolymer concrete made with RCA, steel fibers may be added to the mix. This research aims to study the feasibility of reutilizing locally available industrial solid wastes and RCA in geopolymer concrete for …

Wireless Antenna Multiplexing Using Tunable Antenna For Space Applications, Saifudeen Ahammed Kabeer

Dissertations

Recent development in communication technologies shifts the communication paradigm from point to point to multi-user wireless systems. These developments eased the use of mobile telephone, satellite services, 5G cellular, smart application, and the

Internet of Things. The proliferation of mobile devices has necessitated an elaborate mechanism to serve multiple users over a shared communication medium, and a multiplexing approach is introduced to serve this purpose. Multiplexing refers to a method that aims at combining multiple signals into one signal such that each user would be able to extract its desired data upon receiving the multiplexed signal. This spectrum sharing allows …

Thermal Evaluation Of Advanced Leading Edge For Rotating Gas Turbine Blade: Numerical And Experimental Investigations, Amin Safi

Dissertations

Gas turbine engines play a vital role in our life. Our power demand is significantly and continuously growing. One approach to improve thermal efficiency in gas turbine engines requires a higher turbine inlet gas temperature. Advanced gas turbine engines operate at high temperatures, around 2000 K. Since operating at high temperatures may compromise the blade structure integrity, different cooling systems are used in a turbine blades. One of the most efficient cooling techniques is impingement cooling, mostly used in the leading edge. The leading edge experiences the highest temperature in the blade exposed to the hottest gas.

Researchers studied different …

Conversion Of Lignocellulose Biomass From Date Palm Waste To High Value Chemicals, Emmanuel Galiwango

Dissertations

Lignocellulose biomass has gained growing popularity because of its low cost of production compared to food crops, it solves problems of food and energy security, can grow in various climates and land, and it is CO₂ neutral. Date palm trees produce large amounts of fibrous wastes that are good sources of lignocellulose. There are over 40 million date palm trees in UAE and most of their lignocellulosic wastes (i.e., leaves, surface fibers, bunches, etc.) are currently used for low value applications such as compost or electric generation. However, the lignocellulosic components of this waste stream have the potential to …

Experimental And Computational Investigations Of Type Iii Deep Eutectic Solvents For Btx Removal From Light Naphtha, Kyle Mcgaughy

Theses and Dissertations

Light naphtha is a crucial chemical feedstock that is used to make value-added products from plastic to fuels. Whether it is derived from fossil fuels or renewable resources, naphtha typically contains small fraction of aromatic contaminants such as benzene, toluene, and xylene (BTX). Polar solvents such as sulfolane, ethylene glycol, and glycerol are industrially used to separate BTX from naphtha. Each of these solvents has some processing difficulties though, whether it be sulfolane degrading and corroding equipment or ethylene glycol and glycerol not being particularly selective for BTX over light naphtha. Some of the traditional solvents used for naphtha purification …

Soft Robot Locomotion Via Mechanical Metamaterials: Application In Pipe Inspection, John Barr, Andrew Boyle, Matthew Goodfellow, Nick Rogers, Caroline Stephens

Mechanical Engineering Senior Theses

Pipe inspections are performed using large robots that utilize wheels or tracks for locomotion. Due to their large size, weight and hard exterior, these robots can occasionally cause damage to the pipe interiors during inspection. In addition, these pipe inspection robots struggle with the ability to move in a congested environment and adapt to obstacles or geometry changes within the pipe. This project investigates the capabilities of auxetic and conventional metamaterials to achieve locomotion in an enclosed channel through the different metamaterials reactions to an axial force. The resulting robot is capable of both horizontal and vertical locomotion. Computer simulation …

Generating Rock Volumes Of Lower Radii (Grvlr) - Rock Crusher, Samuel Broyles, James Forman, Karla Raigoza, Hailee Silva

Mechanical Engineering Senior Theses

The GRVLR team designed and constructed a human powered rock crusher intended to assist impoverished widows in Birendranagar, Nepal. These women crush rocks for a living as a result of intense gender discrmination which limits their access to better employment opportunities. The goal of this device was to provide an alternative method to this work that was superior under the criteria of efficiency, ergonomics, and safety. In order to inform the design of the machine, the GRVLR team used customer needs data to generate design requirements and success metrics, and finite element analysis (FEA) in order to evaluate and improve …

Cost Functions Of Crabs: Applications Of Hermit Crab Shell Exchange Behavior To Vacancy Chain Modelling, Hannah Miele

Senior Honors Theses

Vacancy chain systems function as a method of resource distribution in domains such as housing and labor markets. Hermit crabs also employ vacancy chains as a method of shell exchange. Application of vacancy chain modelling in engineering has been attempted, but numerous flaws exist in the developed vacancy chain scheduling algorithm. This work addresses the lack of an appropriate vacancy chain cost function by developing a generalizable cost function based on hermit crab shell exchange behavior. The cost function’s purpose is enabling development of realistic engineering experiments and models based on real-world vacancy chain systems.

The Impact Of Uas On The Passenger Airline Industry, Matthew Whitten

Senior Honors Theses

This study seeks to cover the state of modern autonomous unmanned aerial systems (UAS) integration into commercial aviation, the future applications of the technology in the airline industry, and the roadblocks currently hindering its integration into passenger operations. Although great advancements are being made in the field, technological developments, economic impact, legal restrictions, airline cost, and public perception stand in the way of the full adaptation of autonomous technology into everyday passenger operations. However, technology is rapidly developing, perhaps allowing for the possibility of autonomous air travel even today, but there are likely years of refinement before regulators, executives, and …

Improving The Intellectual And Social Development Of Children With Autism: Design Of A Training Center For Autism, Hasti Jalalian

Makara Journal of Technology

Research on the relationship between the role of architecture and the psychology of children with autism, which indicates that appropriate environments for these children can have a significant effect on their healthcare process, has been recently conducted. However, statistics show that autism spectrum disorders are pervasive, and its extent in Iran has been increasing. Moreover, centers that are specifically designed for children with autism are limited, and paradigms are made without considering the mood of these children. Given the role of architecture in designing a suitable space for these children, an investigation that can identify the specific requirements of these …

Numerical Study Of A Buckling Restrained Brace (Brb) In Steel Structures And Comparison With A Convergent Ordinary Brace (Ocb) Under Static And Dynamic Loading, Fatemeh Habibpour

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Spike Nozzle Design For Use In Nanosat Orbital Maneuvering, Drew Nemeth

Undergraduate Research Symposium Podium Presentations

Annular spike nozzle engines have long been the holy grail of rocket engine design, promising superior performance in a smaller footprint when compared to conventional bell nozzles. However, flaws inherent to the design of spike nozzles have prevented widespread adoption and testing. As a result, research on potential applications has been quite sparse. This project aims to further spike nozzle research by investigating rarely tested materials that literature suggests have potential for use in a spike nozzle design. The goal of the overall research project is to examine 3D printed polycarbonate component longevity under conditions representative of a small satellite …

A Study On Modified Biochars For The Removal Of Trichloroethylene (Tce), Ashtin Hofert, Christina Obra, Suraj Venkat, Padmanabhan Krishnaswamy, Erica Marti Ph.D.

Undergraduate Research Symposium Posters

Biochar (BC), a biomass-derived black carbon with interconnected networks of micropores, is an economical substitute for conventional adsorbents, such as activated carbon. In this study, we investigated the effect of acid modification on the functional groups and adsorptive capacity of the biochar. The BC used here is prepared through pyrolysis at temperatures in the range between 700 °C and 900 °C in an argon gas inert environment from three different biomasses: walnut shells, pecan shells, and loblolly pine. Then, the BCs are modified using hydrochloric acid (HCl) and used for the remediation of chlorinated hydrocarbons such as trichloroethylene (TCE). The …

Collective Risk Of Construction Development On Desert Tortoise Populations, Paulina Smith

Undergraduate Research Symposium Posters

Desert tortoises (Gopherus agassizii) are threatened, extremely territorial reptiles living on a rapidly-shrinking landscape. This literature review was conducted with the goal of determining whether the desert tortoises of the Mojave Desert are experiencing compounded effects from construction development which are not reflected in mortality/fecundity calculations in the current literature. Seventeen peer-reviewed sources were identified from the last 20 years which related to roads, railroads, wind-harvesting, solar energy, and man-made barriers/flood control centers in the Mojave. Current literature reveals that researchers do not have the time nor resources to pursue long-term studies on all of the possible effects on this …

Toward The Use Of Drones For Photovoltaic Panel Inspection, Fausto Vega

Undergraduate Research Symposium Posters

The monitoring of photovoltaic panels is an essential task to maintain the efficiency of the power plant. The conventional form of inspection consists of manual inspection with a thermal camera which takes several days as fields contain thousands of panels. Solar panel installation is costly, and the installation does not guarantee maximum power generation without proper maintenance and handling. A drone with a thermal camera payload was developed to reduce labor costs as well as increase efficiency of the inspection as it can survey the field with a large field of view. Several image processing methods were used to process …

An Experimental Study On Concrete’S Durability And Mechanical Characteristics Subjected To Different Curing Regimes, Edgar L.S. Borrero, Visar Farhangi, Kazem Jadidi, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Considering a constant demand in construction of concrete structures to develop novel approaches for predicting the concert’s properties, a host of investigations were performed on concrete’s mechanical properties and durability under various curing regimes. However, few studies were concerned with evaluating the concrete’s durability using non-destructive concrete surface resistivity tests by applying various curing conditions. The present study compares the influence of different curing regimes on durability and compressive strength of concrete to recommend the most effective curing conditions on concrete’s characteristics. Five curing conditions including ambient, laboratory, dry oven, wet oven and 7-days were analyzed. Accordingly, a non-destructive concrete …