Engineering Commons^™

Mems 411: Lift Demonstration, Dean Ryan-Simmons, Marketa Riley, Puja Chhetri

Mechanical Engineering Design Project Class

A portable lift demonstration was requested to get children interested and thinking about what happens with fluid movement. The demonstration had size and weight requirements, which were both met. Accuracy of lift force representation was not requested, but simple force and flow visualizations were required. The demonstration had variable wind speeds, and showed the change in force with change in angle of attack.

Mems 411: The Pill Cutter, Alex Posly, Alex Austin, Drew Marolf, Dylan Stubbs

Mechanical Engineering Design Project Class

The goal of this design project was to improve the current method of pill cutting for STL Hills Pharmacy. Pharmacists and other medical professionals cut hundreds of pills weekly. Their current methods can only cut one pill at a time with an error rate of 50%. Pills are often split without enough precision and need to be thrown out. Our project was designed to have a 10% maximum error rate, require 1/4 of the force, and split pills 4 times as fast.

Mems 411: The Amazing Renewable Race, Kayla Murphy, Alitzel Yépiz, Daryl Wilson, Rebecca Davis

Mechanical Engineering Design Project Class

The project’s goal was to convey the importance of renewable energy to a 6 through 12 years old audience. This demo was designed to be installed at the St. Louis Science Center. To engage a younger audience, the renewable energy demonstration had to be interactive. As a result, a design similar to a carnival game was chosen. There are 3 stations that represent wind, hydroelectric, and solar energy. In this design, it is a multiplayer interactive race that portrays renewable energy. The initial design was to have each form of energy produced by the users. The user at the hydro …

Mems 411: Compact Sewing Pin Dispenser, Jacob L. Weinstein, Eric Y. Lu, Nick J. Armanino

Mechanical Engineering Design Project Class

Sewing pins are small and hard to handle, and managing the pins can be very distracting (or painful) for a sewist. Our goal was to design a simple and easy sewing pin dispenser for a home sewist that can dispense small headed dressmaker pins. For our design to be a viable product, it would have to dispense pins very quickly, accurately, and safely. Additionally, it has to handle many pins at the same time so it does not have to be reloaded during use. Based on the design of a toothpick dispenser, our prototype small, lightweight, and portable device that …

Mems 411: Self Lacing Shoes, Peter Pigatti, Bryce Roberts, Al-Amin Yusuf

Mechanical Engineering Design Project Class

For our senior design project we have chosen to design and prototype a pair of self lacing shoes with the initial target audience being people with disabilities who are limited in their ability to tie their own shoes for a variety of reasons. However, we hope that this product will catch on in popularity and become normalized for all people. These shoes will allow the wearer to easily slip them on and then secure the shoes to the foot with the push of a button rather than tying laces as in conventional shoes. This process will be driven by a …

Mems 411: Lost Grains Winnower, Seth Jack, Matthew Finer, Alex Maggioni, Kristian Nilsen

Mechanical Engineering Design Project Class

This project involved designing an upgrade for the grain winnower in Dr. Mueller’s anthropology lab at Washington University in St. Louis. A winnower is a device that separates chaff from usable grain after harvesting and threshing. Many such devices exist, from industrial-scale winnowers sorting high volumes of grain to personal coffee bean winnowers. However, the constraints of the lab space and the specialized nature of the grain being winnowed presented specific constraints. An interview with Dr. Mueller was necessary to determine a ranked list of needs for use in the final product. After creating these rankings, a mock-up was used …

Mems 411: Portable Bridge Crane, Alex Eckels, Will Hurley, Zarya Desouza, Troy Bauer

Mechanical Engineering Design Project Class

The team designed and built a portable bridge crane for use in class demonstrations. The design was be based off a typical gantry crane, which consists of a trolley spanning across two horizontal parallel beams that are part of a gantry with a payload hanging from the trolley. The group also needed to design the gantry itself and ensure it was both stable enough to support the trolley and payload at the desired operation speeds as well as scaled properly for the desired use.

Mems 411: The Adjustable Bit Brace, Alex Levy, Alex Dutton, Daniel Luberda, Aidan Murphy

Mechanical Engineering Design Project Class

This group set out to create an open-source adjustable bit brace as a tool to lower the barrier to entry for smaller individuals looking to pick up tools and work on DIY projects. The brace is designed to highlight 3D printed parts, as well as components that can be fabricated at home by an experienced maker. The design uses standard adjustment mechanisms such as button clips and bolts to bring the bit brace from full size down to 2/3 scale in seconds. The device is advised by engineering models, FEA analysis, stiffness/strength targets, and destructive testing protocols to create a …

Mems 411: Dressmaker Pin Dispenser, Alex Goertz, Henry Holtz, Seamus Boyle, Youngjin Hong

Mechanical Engineering Design Project Class

The goal of this project was to design, manufacture, and test a machine which can dispense dressmaker pins in a consistent orientation, allowing the user can easily, and safely remove them one at a time. The purpose of the machine is to increase the efficiency and safety of sewers who may use dressmaker pins daily.

Mems 411: Ground Work Station Design Project, Jakub A. Gawedzki, Mark H. Wood, John B. Campoverde

Mechanical Engineering Design Project Class

Researchers from Washington University had requested us to design and develop a ground work station that allows them to work comfortable in the field for our senior design class.

Mems 411: Automatic Sewing Pin Dispenser, Edric Choi, Enrico Milletti, Adrian Odamtten, Chad Picerni

Mechanical Engineering Design Project Class

The aim of our project is to design and embody an automatic pin dispenser for our customer, Melanie, a recreational sewer. Namely, our pin dispenser design aims to address the need for sewers to safely receive and handle dressmaker pins with one hand whilst working with garments. We have identified three main performance goals for an automatic pins dispenser: Store at least 50 pins at a time, produce at least 1 pin every 2-3 seconds, and present at least 90% of all sorted pins in an upward orientation to the user. These performance goals were identified by interviewing our customer …

Mems 411: Portable Ground Work Station - Group C, Samantha Hudson, Valeria Pinedo Chipana, Valentina Harding, Luis Acosta

Mechanical Engineering Design Project Class

Build a ergonomic, portable, and weather resistant ground work station for members of the department of Biology to use during field research.

Mems 411: St. Louis Science Center Vibration Station, Allie Periman, Hailey Hayes, Brian Higgins

Mechanical Engineering Design Project Class

Student groups work on an open-ended mechanical design problem and finish the semester with a physical prototype, a design report, and a presentation delivered to an external review board. Groups are guided through the engineering design process by completing a set of project deliverables. The quality of these deliverables provides a basis for the evaluation of individual and team performance. This course emphasizes the importance of user-centric design, communication and presentation skill, consideration of real-world constraints, sketching and creativity, prototyping, and data-driven decision-making using engineering models and analyses.

Mems 411: Arliss Canister Vehicle, Patrick Smith, Brannon Boyd, Matthew Donaldson, Kieran Natarajan

Mechanical Engineering Design Project Class

To design, build, and test an autonomous canister vehicle to compete in the ARLISS competition. Design must autonomously drive to a given set of GPS coordinates, record and store GPS data during operation, survive a parachute drop, and traverse rough, uneven terrain.

Mems 411: Portable Bridge Crane With Pulleys, Daniel Shen, Man Kit Mau, Haoxiang Lu, Kaijun Xu

Mechanical Engineering Design Project Class

The bridge crane demonstrates dynamics behavior that the flexible mode has a natural frequency depending on the string length. In this project, a portable bridge crane is designed and made to demonstrate this dynamical phenomena by changing speed and string length. The portable bridge crane requires a light mass and a small size. At the same time, because it needs to be observed in a two-dimensional plane, the trolley must be able to move horizontally on a bridge with tracks, and the speed of the trolley needs to be controlled by a speed controllable motor. The crane needs to suspend …

Santa Clara Community Garden Composter Device, Nick Buccino, Kyle Uyehara, Jay Weber

Interdisciplinary Design Senior Theses

Although studies show that people understand the negative effects of organic waste thrown into landfills, few take steps to help reduce the amount of methane pumped into the environment by composting their food scraps, garden waste, grass clippings, etc. Composting meets with resistance because it actually encompasses a complicated combination of factors and processes that involves knowledge, attention, and manual labor to perform correctly. Composting done improperly results in offensive odors such as ammonia and rotten eggs, a sloppy mess of half-decomposed raw materials, and an abundance of pests such as flies, racoons, and skunks. Individuals, communities, and cities often …

Preferential Vaporization Potential Of Crude Oils And Its Impact On Flame Flashback Behaviors, Ayuob Al Wahaibi

Theses and Dissertations

As combined cycle gas turbines for power generation operating on light distillate fuels provide a sufficient energy, there is a global trend in using heavy liquids (e.g. HFO, crude oils) for direct-firing in gas turbine. However, using these heavy fuels imposes many challenges due to their wide range of physical/chemical properties, which control near-limit combustion behaviors, such lean blow-out and flashback. In addition, the ignition propensity of these heavy fuels is not reported in crude assays, and utilizing a simple, with small sample, and quick methodology to characterize the ignition propensity is important in determining the fuel quality.

In this …

Polymer Microparticles For Encapsulation And Presentation Of Anti-Inflammatory Agents For Inflammatory Diseases, Christopher Isely

Theses and Dissertations

Inflammatory diseases have a huge economic impact on the healthcare system. Incidence of obesity and muscle atrophy, two high profile inflammatory diseases, continues to increase. Anti-inflammatory agents are potential therapeutics for these diseases. Resveratrol is a polyphenol that has anti-inflammatory effects; however, resveratrol suffers from low bioavailability and hasn’t had impressive clinical results when delivered orally. Mannose is a monosaccharide that also has anti-inflammatory effects, however, effects are highest when mannose is presented on the surface of a support the size of a bacteria. Incorporation of resveratrol and mannose into biodegradable polymer microparticles could be a feasible approach to overcome …

Defining The Pathophysiology Of Gut Humoral Immunodeficiency, Ahmed Dawood Mohammed

Theses and Dissertations

Mucosal antibodies maintain gut homeostasis by promoting spatial segregation between host tissues and luminal microbes. Antibody-deficiency is the most common form of primary immunodeficiency observed in humans. In antibody-deficient humans, abnormal composition of the gut microbiota ('dysbiosis') is associated with chronic inflammatory responses and gastrointestinal complications. However, the mechanisms by which dysbiosis promotes inflammatory disease are poorly defined. In the studies described in this dissertation, we utilize CD19-/- mice as a model of antibody deficiency to test the hypothesis that antibody deficiency negatively impacts gut physiology under steady-state conditions. Chapter #1 is an overview of B cell development and how …

Anisotropic Scaffolds For Peripheral Nerve And Spinal Cord Regeneration, Wen Xue, Wen Shi, Yunfan Kong, Mitchell Kuss, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

The treatment of long-gap (>10 mm) peripheral nerve injury (PNI) and spinal cord injury (SCI) remains a continuous challenge due to limited native tissue regeneration capabilities. The current clinical strategy of using autografts for PNI suffers from a source shortage, while the pharmacological treatment for SCI presents dissatisfactory results. Tissue engineering, as an alternative, is a promising approach for regenerating peripheral nerves and spinal cords. Through providing a beneficial environment, a scaffold is the primary element in tissue engineering. In particular, scaffolds with anisotropic structures resembling the native extracellular matrix (ECM) can effectively guide neural outgrowth and reconnection. In …

Internet Of Things Based Messaging Protocols For Aquaculture Applications - A Bibliometric Analysis And Review, Rupali Shete, Anupkumar M. Bongale Dr., Arunkumar Bongale Dr.

Library Philosophy and Practice (e-journal)

Internet of Things (IoT) which connects real-world physical objects with various identities involves different technologies and research areas. As it is an integration of different standards and technologies with numerous capabilities, the implementation phase needs to consider important parameters of communication. In IoT this is achieved through messaging protocols. Each object has its own limitations in terms of sensing capability, storage capacity, connectivity, power utilization, etc. And hence when such objects are deployed for different applications, they need to perform well in terms of their various capabilities. Messaging protocols at this stage need to consider these diverse elements. One of …

Hydrothermal Synthesis And Structural Investigation Of A Crystalline Uranyl Borosilicate, Kristen A. Pace, Vladislav V. Klepov, Mark D. Smith, Travis Williams, Gregory Morrison, Jochen A. Lauterbach, Scott T. Misture, Hans Conrad Zur Loye

Faculty Publications

The relevance of multidimensional and porous crystalline materials to nuclear waste reme-diation and storage applications has motivated exploratory research focused on materials discovery of compounds, such as actinide mixed-oxoanion phases, which exhibit rich structural chemistry. The novel phase K1.8 Na1.2 [(UO2)BSi4 O12 ] has been synthesized using hydrothermal methods, rep-resenting the first example of a uranyl borosilicate. The three-dimensional structure crystallizes in the orthorhombic space group Cmce with lattice parameters a = 15.5471(19) Å, b = 14.3403(17) Å, c = 11.7315(15) Å, and V = 2615.5(6) Å3, and is composed of UO6 octahedra linked by [BSi4 O12 ]5− chains to …

Signatures Of Vibrational And Electronic Quantum Beats In Femtosecond Coherence Spectra, Paul C. Arpin, Daniel B. Turner

Materials Science and Engineering Faculty Publications and Presentations

Femtosecond laser pulses can produce oscillatory signals in transient-absorption spectroscopy measurements. The quantum beats are often studied using femtosecond coherence spectra (FCS), the Fourier domain amplitude, and phase profiles at individual oscillation frequencies. In principle, one can identify the mechanism that gives rise to each quantum-beat signal by comparing its measured FCS to those arising from microscopic models. To date, however, most measured FCS deviate from the ubiquitous harmonic oscillator model. Here, we expand the inventory of models to which the measured spectra can be compared. We develop quantum-mechanical models of the fundamental, overtone, and combination-band FCS arising from harmonic …

Behavior Of Steel Fiber-Reinforced Geopolymer Concrete Made With Recycled Concrete Aggregates, Abdalla Ahmed Moallim Hussein

Theses

Industrial by-products and recycled concrete aggregates (RCA) have the potential to fully replace cement and natural aggregates, respectively, in the production of concrete rather than being discarded wastefully into landfills or stockpiles. Yet, their combined use in the development of a novel RCA geopolymer concrete has been limited to nonstructural purposes, owing to the inferior mechanical and durability properties of said concrete. To improve the properties of geopolymer concrete made with RCA, steel fibers may be added to the mix. This research aims to study the feasibility of reutilizing locally available industrial solid wastes and RCA in geopolymer concrete for …

Wireless Antenna Multiplexing Using Tunable Antenna For Space Applications, Saifudeen Ahammed Kabeer

Dissertations

Recent development in communication technologies shifts the communication paradigm from point to point to multi-user wireless systems. These developments eased the use of mobile telephone, satellite services, 5G cellular, smart application, and the

Internet of Things. The proliferation of mobile devices has necessitated an elaborate mechanism to serve multiple users over a shared communication medium, and a multiplexing approach is introduced to serve this purpose. Multiplexing refers to a method that aims at combining multiple signals into one signal such that each user would be able to extract its desired data upon receiving the multiplexed signal. This spectrum sharing allows …

Thermal Evaluation Of Advanced Leading Edge For Rotating Gas Turbine Blade: Numerical And Experimental Investigations, Amin Safi

Dissertations

Gas turbine engines play a vital role in our life. Our power demand is significantly and continuously growing. One approach to improve thermal efficiency in gas turbine engines requires a higher turbine inlet gas temperature. Advanced gas turbine engines operate at high temperatures, around 2000 K. Since operating at high temperatures may compromise the blade structure integrity, different cooling systems are used in a turbine blades. One of the most efficient cooling techniques is impingement cooling, mostly used in the leading edge. The leading edge experiences the highest temperature in the blade exposed to the hottest gas.

Researchers studied different …

Conversion Of Lignocellulose Biomass From Date Palm Waste To High Value Chemicals, Emmanuel Galiwango

Dissertations

Lignocellulose biomass has gained growing popularity because of its low cost of production compared to food crops, it solves problems of food and energy security, can grow in various climates and land, and it is CO₂ neutral. Date palm trees produce large amounts of fibrous wastes that are good sources of lignocellulose. There are over 40 million date palm trees in UAE and most of their lignocellulosic wastes (i.e., leaves, surface fibers, bunches, etc.) are currently used for low value applications such as compost or electric generation. However, the lignocellulosic components of this waste stream have the potential to …

Experimental And Computational Investigations Of Type Iii Deep Eutectic Solvents For Btx Removal From Light Naphtha, Kyle Mcgaughy

Theses and Dissertations

Light naphtha is a crucial chemical feedstock that is used to make value-added products from plastic to fuels. Whether it is derived from fossil fuels or renewable resources, naphtha typically contains small fraction of aromatic contaminants such as benzene, toluene, and xylene (BTX). Polar solvents such as sulfolane, ethylene glycol, and glycerol are industrially used to separate BTX from naphtha. Each of these solvents has some processing difficulties though, whether it be sulfolane degrading and corroding equipment or ethylene glycol and glycerol not being particularly selective for BTX over light naphtha. Some of the traditional solvents used for naphtha purification …

Soft Robot Locomotion Via Mechanical Metamaterials: Application In Pipe Inspection, John Barr, Andrew Boyle, Matthew Goodfellow, Nick Rogers, Caroline Stephens

Mechanical Engineering Senior Theses

Pipe inspections are performed using large robots that utilize wheels or tracks for locomotion. Due to their large size, weight and hard exterior, these robots can occasionally cause damage to the pipe interiors during inspection. In addition, these pipe inspection robots struggle with the ability to move in a congested environment and adapt to obstacles or geometry changes within the pipe. This project investigates the capabilities of auxetic and conventional metamaterials to achieve locomotion in an enclosed channel through the different metamaterials reactions to an axial force. The resulting robot is capable of both horizontal and vertical locomotion. Computer simulation …

Generating Rock Volumes Of Lower Radii (Grvlr) - Rock Crusher, Samuel Broyles, James Forman, Karla Raigoza, Hailee Silva

Mechanical Engineering Senior Theses

The GRVLR team designed and constructed a human powered rock crusher intended to assist impoverished widows in Birendranagar, Nepal. These women crush rocks for a living as a result of intense gender discrmination which limits their access to better employment opportunities. The goal of this device was to provide an alternative method to this work that was superior under the criteria of efficiency, ergonomics, and safety. In order to inform the design of the machine, the GRVLR team used customer needs data to generate design requirements and success metrics, and finite element analysis (FEA) in order to evaluate and improve …