Engineering Commons^™

Experimental Investigation And Modeling Of The Response Surface Methodology For The Optimization Of A Multiloop Heat Pipe, Dar-Sun Liou

Journal of Marine Science and Technology–Taiwan

Considering thermohydrodynamic instabilities in the design of cooling systems has become a trend, which has led to the evolution of thermal management. However, such instabilities, which cause flow perturbations, are difficult to explain by using physical theories. The aim of this study was to use a parameter-based modeling technique, namely the response surface methodology (RSM), to characterize the dynamics of multiloop heat pipes (MLHPs) under various heat loads. The RSM, which is based on statistics, was used to determine the relationship between the design parameters and thermal responses of MLHPs, which are represented using polynomials. Th aim of our RSM …

Supply Chain Inventory Model With Markov Chain Demand, Zhi-Ping Lin, Su-Ping Ho

Journal of Marine Science and Technology–Taiwan

This study aims to develop a new one-vendor multiple-buyers integrated inventory model. We believe that our proposed model can forecast the demand of all buyers in the coming future by using data that have already existed and to minimize the total cost-for both buyers and vendors. In recent days, the Markov chain approach has played one of the critical methods of demand forecasting in the Supply Chain Management (SCM) field. The proposed model of this study is to analysis the demand of all buyers in one specific season that was impacted by the demand in the same season from last …

Fire Resistance Of Steel Connectors Of Precast Lightweight Concrete Walls, Jen-Hao Chi, Maochieh Chi, Yue-Lin Huang

Journal of Marine Science and Technology–Taiwan

In this study the fire test was performed to investigate the mechanic behaviors and failure patterns of precast normal weight concrete (NWC) and lightweight concrete (LWC) walls with three types of commonly used steel connectors, namely dry (61), wet (81), and bearing (56E) connectors. For the LWC wall specimens, on lateral application of tension, the cracking load values of the dry, wet, and bearing-type connectors were 95.1%, 86.3%, and 83.0%, respectively, of the original loads, and their ultimate load values were 81.6%, 90.7%, and 85.0%, respectively, of the original. In the shearing test after the fire resistance test, the cracking …

Differential Evolution Algorithm For Ship Path Planning In Open Waters, Yu-Tao Kang, Wei-Jiong Chen, Jin-Hui Wang

Journal of Marine Science and Technology–Taiwan

A general approach to the derivation of simple yet accurate formulas for identifying bandpass nonlinear channels in or-thogonal frequency-division multiplexing (OFDM) systems is proposed in this paper. The OFDM is an widely adopted tech-nique for wideband communication applications. An OFDM signal could be highly vulnerable to nonlinearities in a com-munication link. This makes proper estimation of the nonlin-ear channel essential for an OFDM system. A nonlinear bandpass communication channel is commonly described by a complex Voletrra series, in which the task of nonlinear channel identification is to determine the Volterra kernels. This task can become very difficult when the order …

Integrated Simulation Of Virtual Prototypes And Control Algorithms Of Unmanned Surface Vehicles Based On A Robot Operating System, Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, Luman Zhao, Sol Ha, Nak-Wan Kim, Chan-Woo Yu

Journal of Marine Science and Technology–Taiwan

Unmanned surface vehicles (USVs) require autonomous software with a high level of liberalization and automation to complete various missions. Therefore, experimental verification and validation of this software at the initial design stage are essential. However, such experiments are impossible before the actual hardware is developed, and the creation of an external environment for the mission requires substantial cost and time. In this study, virtual prototypes of the mission environment and hardware for the USV are developed. Then, a simulation environment for testing the control algorithms in the autonomous software is constructed. Data communication with the USV hardware is necessary for …

Identification Of Nonlinear Channels In Bandpass Communication Systems With Ofdm Inputs, Jen-Ho Cheng, Ching-Hsiang Tseng

Journal of Marine Science and Technology–Taiwan

A general approach to the derivation of simple yet accurate formulas for identifying bandpass nonlinear channels in or-thogonal frequency-division multiplexing (OFDM) systems is proposed in this paper. The OFDM is an widely adopted tech-nique for wideband communication applications. An OFDM signal could be highly vulnerable to nonlinearities in a com-munication link. This makes proper estimation of the nonlin-ear channel essential for an OFDM system. A nonlinear bandpass communication channel is commonly described by a complex Voletrra series, in which the task of nonlinear channel identification is to determine the Volterra kernels. This task can become very difficult when the order …

Image-Based Bridge Defect Detection And Monitoring Technologies, Jian Zhang

INSPIRE Archived Webinars

Computer-vision is an emerging technology which has been widely used in the field of structural health monitoring. This seminar will cover the latest achievements of our research group in defect detection, health monitoring, and construction control using image-based technologies. For defect detection, advanced unmanned aerial vehicles (UAVs) have been developed to automatically detect surface cracks and other types of structural damages based on digital image processing techniques. An integrated navigation system combining binocular camera and inertial sensor enables automated route planning for the developed UAVs in case of GPS failure. Specifically, a wall-climbing UAV is designed to acquire detailed surface …

A Modular Open-Technology Device To Measure And Adjust Concentration Of Sperm Samples For Cryopreservation, Nikolas C. Zuchowicz

LSU Master's Theses

Repositories for aquatic germplasm can safeguard the genetic diversity of species of interest to aquaculture, research, and conservation. The development of such repositories is impeded by a lack of standardization both within laboratories and across the research community. Protocols for cryopreservation are often developed ad hoc and without close attention to variables, such as sperm concentration, that strongly affect the success and consistency of cryopreservation. The wide dissemination and use of specialized tools and devices can improve processing reliability, provide data logging, produce custom hardware to address unique problems, and save costs, time, and labor. The goal of the present …

Metasurface Cloaks To Decouple Closely Spaced Printed Dipole Antenna Arrays Fed By A Microstrip-To-Balanced Transmission-Line Transition, Doojin Lee, Alexander B. Yakovlev

Faculty and Student Publications

In this work, we present a numerical study of 1D and 2D closely spaced antenna arrays of microstrip dipole antennas covered by a metasurface in order to properly cloak and decouple the antenna arrays operating at neighboring frequencies. We show that the two strongly coupled arrays fed by a microstrip-to-balanced transmission-line transition are effectively decoupled in 1D and 2D array scenarios by covering the dipole antenna elements with an elliptically shaped metasurface. The metasurface comprises sub-wavelength periodic metallic strips printed on an elliptically shaped dielectric cover around the dipole antennas and integrated with the substrate. We present a practical design …

Characterizing Behaviors And Functions Of Joints For Design Of Origami-Based Mechanical Systems, Nathan Chandler Brown

Theses and Dissertations

This thesis addresses a number of challenges designers face when designing deployable origami-based arrays, specifically joint selection, design, and placement within an array. In deployable systems, the selection and arrangement of joint types is key to how the system functions. The kinematics and performance of an array is directly affected by joint performance. This work develops joint metrics which are then used to compare joint performances, constructing a tool designers can use when selecting joints for an origami array. While often a single type of joint is used throughout an array, this work shows how using multiple types of joints …

Marketing Collateral And Social Media, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Marketing Collateral and Social Media" from September 14, 2021.

Evolutionary Algorithm-Based Adaptive Robust Optimization For Ac Security Constrained Unit Commitment Considering Renewable Energy Sources And Shunt Facts Devices, Aliasghar Baziar, Rui Bo, Misagh Dehghani Ghotbabadi, Mehdi Veisi, Waqas Ur Rehman

Electrical and Computer Engineering Faculty Research & Creative Works

An AC security constrained unit commitment (AC-SCUC) in the presence of the renewable energy sources (RESs) and shunt flexible AC transmission system (FACTS) devices is conventionally modeled as a deterministic optimization problem to minimize the operation cost of conventional generation units (CGUs) subject to AC optimal power flow (AC-OPF) equations, operation constraints of RESs, shunt FACTS devices, and CGUs. To cope with the uncertainties of load and RES generation, robust and stochastic optimization and linearized formulation have been used to achieve a sub-optimal solution. To arrive at a more optimal solution, an evolutionary algorithm-based adaptive robust optimization (EA-ARO) approach to …

Bridge Inspection And Defect Recognition With Using Impact Echo Data, Probability, And Naive Bayes Classifiers, Faezeh Jafari, Sattar Dorafshan

Civil Engineering Faculty Publications

Interpretation of IE data have been carried out by analyzing IE signals in frequency domain to determine the maximum frequency. However, the current peak frequency method can be inaccurate. The purpose of this research is to introduce features in IE signals that can be used for effective classification and interpretation for bridge deck evaluation through statistical analysis and Naive Bayes classifiers. The dataset contained IE data collected from eight slabs created at Advanced Sensing Technology FAST NDE laboratory (FHWA). A set of statistical features in time domain, normalized peak values, and length of preprocessed signals were used to classify the …

Thermal Barrier Coating For Carbon Fiber-Reinforced Composite Materials, Heejin Kim, Jungwon Kim, Juhyeong Lee, Min Wook Lee

Mechanical and Aerospace Engineering Faculty Publications

Carbon fiber-reinforced plastic (CFRP) composites are widely employed in lightweight and high performance applications including supercars, aero-vehicles, and space components. However, although carbon fibers are thermally stable, the low thermal endurance of the matrix materials remains a critical problem in terms of the performance of the material. In this study, we proposed a new, Al₂O₃-based thermal barrier coating (TBC) for the CFRP composites. The TBC comprised α-phase Al₂O₃ particles with a mean diameter of 9.27 μm. The strong adhesion between the TBC and the CFRP substrate was evaluated using a three point bending …

Session 3a: Watershed Management Ii, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• Salinization and Alkalinization of Kentucky Lake: A Result of Human Activity?
• Tools for Wetlands Assessment and Prioritization: Assets in Abating Nonpoint Source Pollution
• Monitoring McConnell Springs Stormwater Quality Wetland Pond and Gainesway Pond Retrofit: 2010-2021

Session 3b: Sediments And Nutrients, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• Starter Fertilizer Impacts on Turfgrass Establishment and Quality
• Blue Water Farms: Edge-of-Field Monitoring of Nutrient and Sediment Loss from No-Till Corn and Soybean Fields in the Lower Green River Watershed
• Blue Water Farms: Edge-of-Field Monitoring of Nutrient and Sediment Loss from Wetland Watersheds in the Northern Mississippi Embayment

Session 2a: Watershed Management I, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• Update to the 2019 Nutrient Loads and Yields in Kentucky Study
• Lexmark Rainwater Harvesting System – Turning Unused Infrastructure and Problematic Stormwater into an Award-Winning Asset
• Leveraging Intersections: Integrating Watershed Management and Hazard Mitigation Planning to Combat Climate Change
• Riparian Reforestation for Stream Water Quality Improvement: Evidence from Reforested Urban Sites in Lexington
• Red River Gorge, Kentucky Non-Point Source Pollution Program Implementation

Session 2b: Groundwater And Karst, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• In Situ 3D Electrical Resistivity Method for Understanding Water Dynamics in Shallow Karst Features*
• Identifying the Intersection of Contaminated Karst Water and Off-the-Grid Communities in Southcentral Kentucky Using GIS*
• Groundwater Characterization: How Much Data is Enough?
• Examining Hydrogeological Dynamics of Baselevel and Reverse Flow of the Green River and Major Springs of Mammoth Cave, Kentucky*
• Soil Moisture Micronet in the Daniel Boone National Forest

Poster Session, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

1. Advancing Prediction of Headwater Flow Permanence and Stream Expansion and Contraction Using a Process-Based Hydrologic Model
2. Developing ANN Model for Predicting Lake Michigan E.Coli Counts
3. Examining Long Term Trends in Rainfall and Stream Flow at Upper Wabash River Basin Using Self Organizing Map
4. Investigating Water and Sediment Transport Processes with High-Resolution Sensor Measurements and Hysteresis Analysis in the Cane Run Royal Spring Basin, Kentucky, USA
5. Blue Water Farms: Edge-of-Field Water Quality Monitoring of Nutrient and Sediment Loss from No-Till Corn and Soybean Fields in the Lower Cumberland River Watershed
6. Determination of Microcystin Cyanobacterial Toxins in Kentucky Lakes by Diffusive Gradients …

Session 1: Water Research: Impacting The Lives Of Kentuckians, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• Investigation and Remediation of an Urban Karst Groundwater Gasoline Leak at Lost River Cave, Bowling Green, Kentucky
• Spatial and Seasonal Variation in Concentrations of Disinfection Byproducts in the Public Drinking Water System of Martin County, Kentucky
• Farmer to Farmer: Virtual Shop Talks
• Solutions Begin with Understanding: Off-the-Grid Communities and Contaminated Karst Groundwater in Southcentral Kentucky*

Plenary Session, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

No abstract provided.

Proceedings Of 2021 Kentucky Water Resources Annual Symposium, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

This symposium was planned and conducted as a part of the state water resources research institute annual program that is supported by Grant/Cooperative Agreement Number G20AS00025 from the United States Geological Survey (USGS). The contents of this proceedings document and the views and conclusions presented at the symposium are solely the responsibility of the individual authors and presenters and do not represent the official views of the USGS or of the symposium organizers and sponsors. This publication is produced with the understanding that the United States Government is authorized to reproduce and distribute reprints for government purposes. Mention of trade …

Precision Grasp Using An Arm-Hand System As A Hybrid Parallel-Serial System: A Novel Inverse Kinematics Solution, Shuwei Qiu, Shuwei Qiu Ph.D., P.Eng.

Electrical and Computer Engineering Publications

In this letter, we present a novel inverse kinematics (IK) solution for a robotic arm-hand system to achieve precision grasp. This problem is kinematically over-constrained and to address the issue and to solve the problem, we propose a new approach with three key insights. First, we propose a human-inspired thumb-first strategy and consider one finger of the robotic hand as the “thumb” to narrow down the search space and increase the success rate of our algorithm. Second, we formulate the arm-thumb serial chain as a closed chain such that the entire arm-hand system is controlled as a hybrid parallel-serial system. …

Improving The Power Outage Resilience Of Buildings With Solar Pv Through The Use Of Battery Systems And Ev Energy Storage, Huangjie Gong, Dan M. Ionel

Electrical and Computer Engineering Faculty Publications

Buildings with solar photovoltaic (PV) generation and a stationary battery energy storage system (BESS) may self-sustain an uninterrupted full-level electricity supply during power outages. The duration of off-grid operation is dependent on the time of the power fault and the capabilities of the home energy management system (HEMS). In this paper, building resilience is quantified by analyzing the self-sustainment duration for all possible power outages throughout an entire year. An evaluation method is proposed and exercised on a reference house in California climate zone 9 for which the detailed electricity usage is simulated using the EnergyPlus software. The influence of …

Development Of Predictive Equations For Thermal Conductivity Of Compost Bedding, Flávio A. Damasceno, Joseph L. Taraba, George B. Day V, Randi A. Black, Jeffrey M. Bewley, Tales J. Fernandes, Carlos E. A. Oliveira, Rafaella R. Andrade, Matteo Barbari, Patrícia F. P. Ferraz, Lorenzo Leso

Biosystems and Agricultural Engineering Faculty Publications

Among animal facilities, compost-bedded pack (CBP) barns have attracted a lot of attention from milk producers and the scientific community. Systematic investigation of the main thermal properties utilizing sawdust in CBP barns is of environmental and economic relevance. In this paper, the aim was to (a) develop predictive equations for the thermal conductivity (k) of compost bedding as a function of moisture content (MC), the degree of compaction (DC_o), and particle size (PS); and (b) investigate the links between k and depth within bedding material. Samples of compost bedding materials were collected from 42 commercial CBP …

Three-Dimensional Microscopic Image Reconstruction Based On Structured Light Illumination, Taichu Shi, Yang Qi, Cheng Zhu, Ying Tang, Ben Wu

Henry M. Rowan College of Engineering Departmental Research

In this paper, we propose and experimentally demonstrate a three-dimensional (3D) microscopic system that reconstructs a 3D image based on structured light illumination. The spatial pattern of the structured light changes according to the profile of the object, and by measuring the change, a 3D image of the object is reconstructed. The structured light is generated with a digital micro-mirror device (DMD), which controls the structured light pattern to change in a kHz rate and enables the system to record the 3D information in real time. The working distance of the imaging system is 9 cm at a resolution of …

Automated Drone Detection Using Yolov4, Subroto Singha, Burchan Aydin

Faculty Publications

Drones are increasing in popularity and are reaching the public faster than ever before. Consequently, the chances of a drone being misused are multiplying. Automated drone detection is necessary to prevent unauthorized and unwanted drone interventions. In this research, we designed an automated drone detection system using YOLOv4. The model was trained using drone and bird datasets. We then evaluated the trained YOLOv4 model on the testing dataset, using mean average precision (mAP), frames per second (FPS), precision, recall, and F1-score as evaluation parameters. We next collected our own two types of drone videos, performed drone detections, and calculated the …

Ems Response Time For Patients Critically-Injured From Automobile Accidents Using Regression Analysis, Sneha R. Vanga, Phillip M. Ligrani, Mehrnaz Doustmohammadi, Michael Anderson

PRC-Affiliated Research

The ability to quickly and effectively receive medical treatment in the event of an automobile collision is one of the most important aspects in emergency medical services (EMS). Emergency medical service providers are the first to respond and manage cases related to trauma, emergency surgery, and critically injured patients. Response time for emergency medical services vehicles is especially important for areas, where travel distances are often much larger, compared to more urban areas. The importance of the present data and analysis procedures are their applicability to multiple environments, including urban settings. Methods: The present study is focused on optimization of …

Ems Response Time For Patients Critically-Injured From Automobile Accidents Using Regression Analysis, Sneha R. Vanga, Phillip M. Ligrani, Mehrnaz Doustmohammadi, Michael Anderson

PRC-Affiliated Research

The ability to quickly and effectively receive medical treatment in the event of an automobile collision is one of the most important aspects in emergency medical services (EMS). Emergency medical service providers are the first to respond and manage cases related to trauma, emergency surgery, and critically injured patients. Response time for emergency medical services vehicles is especially important for areas, where travel distances are often much larger, compared to more urban areas. The importance of the present data and analysis procedures are their applicability to multiple environments, including urban settings. Methods: The present study is focused on optimization of …

A Case Study To Quantify Variability In Building Load Profiles, Andrew Parker, Sam Moayedi, Kevin James, Dongming Peng, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent technology development and penetration of advanced metering infrastructure (AMI), advanced building control systems, and the internet-of-things (IoT) in the built environment are providing detailed information on building operation, performance, and user's comfort and behavior. Building owners can obtain a wide range of energy consumption details at various levels of time granularity to augment their decisions as they manage the building operation and interact with the grid. AMI data are providing a new level of detail and visibility that may enhance building services and assets in the smart grid domain and make buildings inch closer to becoming a grid-interactive energy …