Engineering Commons^™

Simulation On Aviation Maintenance Support System Based On Goal-Driven, Jiping Cong, Lijie Cui, Ding Gang, Ren Bo

Journal of System Simulation

Abstract: Aiming at the large investment and long time for optimization in aviation maintenance support model practice, for the first time, based on Netlogo platform, the multi-agent aviation maintenance support simulation system is constructed, which provides a reference to adapt the current support tasks and improve the evaluation efficiency. Selecting the annual mission flight time, echelon status, aircraft intact rate, and mission completion rate as the goal drivers, the simulation on different aviation maintenance support process is carried out, which displays the changes in flight arrangements, aircraft status, personnel, support equipment, etc. The simulation experiment shows that the multi-agent …

Modeling And Simulation On Optimum Maneuver Control Surface Configuration Of Aircraft In Low Altitude Penetration Mode, Huzi Wu, Wang Jin, Wantao Qi, Kaibao Jin

Journal of System Simulation

Abstract: Optimum maneuver control surface can ensure the safety flight cability of aircraft in low altitude penetration mode, and it is of great siginifcance to establish the valid and effective numerical simulation model. The numerical differential equations with muti-constraints is adopted for the first time, to construct the simulaton model for the aircraft with small wing load and mutifunctional and combined CS in low altitude manuever, the schemes of different maneuver CS considering the obstacle, the limit of angle of bank, the graident of climb are built. The simulation results show that the model is effective for solving the …

Research On Simulation Object Interfaces Oriented To Plug-In-Play Pattern, Zhongwei Lin, Xiuhe Li, Yiping Yao, Shen Yang, Shaoqi Dai, Qianqian Shi

Journal of System Simulation

Abstract: Models and simulation engines provide services mainly in the format of executable files in cloud environment, thus plug-in-play pattern becomes the first choice of simulation, which needs necessitating interfaces to connect the model processing logics and the simulation engine control logics. A set of simulation object interfaces that covers the simulation full life cycle of initialization, event scheduling, processing and cancel, publish and processing of subscription, roll-back and termination is proposed, and then defined in C++ language. Two examples show the process of the interfaces and the effectiveness of constructing the simulation objects. With the instantiation and disposal …

Research And Implementation Of A High Performance Distributed Object-Oriented Simulation Engine, Xiaodong Huang, Kongshu Xie

Journal of System Simulation

Abstract: Simulation engine is the core of simulation platform and the operating system of simulation field. On the basis of the reflection-based object-oriented simulation modeling framework and programing specification, aiming at the developing integration and operation requirements for the large-scale multi-granularity computation intensive simulation system, a High-performance Distributed Object-oriented Simulation Engine (HDOSE) is developed. Combined with the brief review of HDOSE development, on the basis of expounding the HDOSE function services and architecture, the key technology, large-scale multi-granularity parallel computation, programming model and interface, parameterized componentized modeling and so on are mainly introduced. The HDOSE typical application cases …

Whole Ship Simulation Training Platform Based On Virtual Reality, Jiawen Sun, Hongxiang Ren, Fangbing Xiao, Xiaobin Jiang

Journal of System Simulation

Abstract: Under the current navigation education mode, it is common that trainees lack the overall navigation knowledge and the operation practice on onboard equipment and instruments. It is necessary to develop a whole ship simulation training platform that is not limited by time and sites. The six-degree freedom mathematical model of ship motion is established by using the separation modeling theory of ship maneuverability. The flexible object simulation technology, the modeling and rendering of ocean wave technology, and the reverse dynamics technology are adopted to realize the ship scene roaming and equipment interaction. The simulation results show that …

Evolutionary Simulation Of Medical Products Export Safety Supervision Considering Regulation Of Importing Country, Xiaoli Li, Cejun Cao, Fanshun Zhang

Journal of System Simulation

Abstract: In order to investigate the impacts of the regulation of importing country on export safety supervision regarding medical products in the COVID-19 epidemic situation, an evolutionary game model considering the relation between export enterprise and supervision of government is constructed. Based on MATLAB simulation, the influences of different factors including regulation level of importing country, punishment mechanism on export safety supervision of medical products are analyzed. Results show that the illegal behaviors of the export enterprises of medical products can be restrained when the regulation level of importing country reaches a certain threshold. But that would fuel the passively …

Classification Of Flight Delay Based On Nonlinear Weighted Xgboost, Tang Hong, Wang Dong, Song Bo, Wenkui Chu, Linyuan He

Journal of System Simulation

Abstract: Aiming at the classification of flight delay under imbalance data, a novel method based on nonlinear weighted XGBoost (extreme gradient boosting) is proposed. The imbalance of flight delay data and the influence for classification performance caused by the data imbalance are analyzed. A heuristic nonlinear weighting method based on sample proportion is proposed, and the negative log likelihood loss function is optimized. The real flight delay dataset is used to validate the performance of the classification algorithm. The experiment results show that the proposed nonlinear weighted XGBoost algorithm can improve the classification accuracy of flight delay, while ensuing a …

Research On Benefits Of Mixed Traffic Flow Of Intelligent Connected Vehicles, Mingwei Hu, Zhiming Zhang, Xiangsheng Chen

Journal of System Simulation

Abstract: In order to study the benefits of the mixed traffic flow Intelligent Connected Vehicles (ICV) and non-connected vehicles, aiming at the intelligent and connected characteristics of ICV. Through the microscopic traffic simulation software Vissim redevelopment, ICV having the function of intelligent connected vehicles traffic flow modeling is realized. The mixed traffic flow composed of intelligent connected vehicles and non-connected vehicles under different market penetration rates is simulated. By comparing the traffic benefits at different time periods and different penetration rates, it is found that with the increase of the market penetration rate of intelligent connected vehicles, the average speed …

Visual Analysis Method Of Tobacco Quality Data Based On Dimension Reduction, Tian Dong, Guihua Shan, Xuebin Chi, Yanling Zhang, Weihua Feng, Jianwei Wang, Aiguo Wang, Wang Rui

Journal of System Simulation

Abstract: In order to meet the requirements of tobacco leaf matching across regions in tobacco material selection, a visual analysis method of tobacco leaf quality data that incorporating dimension reduction and correlation analysis methods is developed. Through the dimension reduction algorithm, the comparison algorithm and the visual interaction method based on the classification of aroma area for tobacco leaf quality data, a visual analysis method for exploring space division and correlation analysis of tobacco leaf quality data is provided. National tobacco leaf quality data analysis cases and expert demonstrations show that the method can carry out the tobacco leaf quality …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• Women in Cyber Security

Build Your Own Body Mod: Empowerment Through Prototyping And Design, Anaiss Arreola, Katherine R. Ganim

Journal of Science Education for Students with Disabilities

When you don’t have a hand, what could you have instead? This article introduces the impact of inviting youth with disabilities to learn tools and technology to design their own solutions and advocate for their own future. This approach to programming is rooted in a mindset of designing WITH, not FOR. Not only are design outcomes improved when users are incorporated into the process, but this approach has been shown to improve confidence in creating one’s own solutions. These programs include hands-on “design-your-own-body-mod” workshops, as well as a budding inclusive design consultancy led by youth with disabilities. Through this programming, …

Excited-State Lifetimes Of Dna-Templated Cyanine Dimer, Trimer, And Tetramer Aggregates: The Role Of Exciton Delocalization, Dye Separation, And Dna Heterogeneity, Jonathan S. Huff, Daniel B. Turner, Olga A. Mass, Lance K. Patten, Christopher K. Wilson, Simon K. Roy, Matthew S. Barclay, Bernard Yurke, William B. Knowlton, Paul H. Davis, Ryan D. Pensack

Materials Science and Engineering Faculty Publications and Presentations

DNA-templated molecular (dye) aggregates are a novel class of materials that have garnered attention in a broad range of areas including light harvesting, sensing, and computing. Using DNA to template dye aggregation is attractive due to the relative ease with which DNA nanostructures can be assembled in solution, the diverse array of nanostructures that can be assembled, and the ability to precisely position dyes to within a few Angstroms of one another. These factors, combined with the programmability of DNA, raise the prospect of designer materials custom tailored for specific applications. Although considerable progress has been made in characterizing the …

Design Of A Custom Digital Light Projection Printer For In-Situ Production Of Composites With Improved Thermomechanical Properties, Margaret Anne Gillan

Theses and Dissertations

This work seeks to improve upon the existing state-of-the-art for vat photopolymerization additive manufacturing; namely, producing in-situ composites that combine the precision and high-performance materials of the vat photopolymerization with the strength of fiber-reinforced polymer composites. A custom-designed digital light projection printer was designed and built for printing composites, which includes an automated fiber tape system to place woven E-glass fiber mats in-situ. To validate the performance improvement of composites versus the neat matrix, composites were fabricated on the custom printer with hand-placed fiber mats. A high-performance, dual-cure resin was used for these studies. The effect of layer height on …

Blood Biomarkers For Mild Traumatic Brain Injury: A Selective Review Of Unresolved Issues, Daniel B. Hier, Tayo Obafemi-Ajayi, Matthew S. Thimgan, Gayla R. Olbricht, Sima Azizi, Blaine Allen, Bassam A. Hadi, Donald C. Wunsch

Biological Sciences Faculty Research & Creative Works

Background: The use of blood biomarkers after mild traumatic brain injury (mTBI) has been widely studied. We have identified eight unresolved issues related to the use of five commonly investigated blood biomarkers: neurofilament light chain, ubiquitin carboxy-terminal hydrolase-L1, tau, S100B, and glial acidic fibrillary protein. We conducted a focused literature review of unresolved issues in three areas: mode of entry into and exit from the blood, kinetics of blood biomarkers in the blood, and predictive capacity of the blood biomarkers after mTBI.

Findings: Although a disruption of the blood brain barrier has been demonstrated in mild and severe traumatic brain …

The Factors Impacting The Incorporation Of The Sustainable Development Goals Into Raw Materials Engineering Curricula, Dimitris Damigos, George Valakas, Anna Gaki, Katerina Adam

Journal of Sustainable Mining

It is widely recognised and acknowledged that the mining industry, if properly operating and managed, has the potential to positively contribute to “The 2030 Agenda for Sustainable Development”. In this direction, the Raw Materials (RM) engineering education possesses a crucial role, given the need to instil in tomorrow’s mining engineers the sustainability principles. This paper explores the educational needs of the Greek RM sector and the factors constituting the RM whole value chain SDGs-education-innovation eco-system. The research follows a two-stage focus group approach. First, the perceptions, opinions and beliefs of invited stakeholders were explored in the context of semi-structured interviews. …

Hidden In Plain Sight: Why Sustainment Is So Critical To The Circular Supply Chains For Technical Products, Dave Peterson

Operations Management Presentations

• Technical products are typically complex, long-lived and high-cost equipment—such as: aircraft, vehicles, ships, capital equipment/machinery and utilities infrastructure. While many technical products are manufactured via traditional linear supply chains, their useful lives often rely upon sustainment systems incorporating significant aspects of circular supply chains. This webinar takes a closer look at technical products and the critical role of systems sustainment to achieve and fulfill circular supply chains. The key takeaways from this webinar are:
  • The Earth is running out of resources which will have a direct impact upon maintaining/improving our quality of life.
  • The circular economy philosophy has definite relevance …

Drone-Based Vibration Monitoring And Assessment Of Structures, Sabrina Carroll, Joud Satme, Shadhan Alkharusi, Nikolaos Vitzilaios, Austin Downey, Dimitris Rizos

Faculty Publications

This paper presents a novel method of procuring and processing data for the assessment of civil structures via vibration monitoring. This includes the development of a custom sensor package designed to minimize the size/weight while being fully self-sufficient (i.e., not relying on external power). The developed package is delivered to the structure utilizing a customized Unmanned Aircraft System (UAS), otherwise known as a drone. The sensor package features an electropermanent magnet for securing it to the civil structure while a second magnet is used to secure the package to the drone during flight. The novel B-Spline Impulse Response Function (BIRF) …

Framework To Develop Time- And Voltage-Dependent Building Load Profiles Using Polynomial Load Models, Andrew Parker, Mhd Anas Alkrch, Kevin James, Ahmad Almaghrebi, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The power consumption of buildings over the course of each minute, hour, day and season plays a major role in how this load influences the Electric Power System voltage and frequency, and vice versa. This consumption is based on the building's load component types, efficiencies, and how they consume power and react to changes in real time. Due to this complexity, standard full-building load models are typically voltage-invariant. This paper proposes a novel framework to transform these voltage-invariant building load models into fully time- and voltage-dependent load profiles using available data on the voltage sensitivity of individual load components. While …

Cape 4 Stem Outreach, Hayden Hulin, Nick Pugh

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Hayden Hulin and Nick Pugh titled "CAPE4 STEM Outreach" from September 15, 2021.

Development Of An Origami Inspired Composite Deployable Structure Utilizing Compliant Joints As Surrogate Folds, Samuel Porter Smith

Theses and Dissertations

This work presents the design and construction of a self-deployable, self-stiffening,and retractable (SDSR) space array from carbon fiber reinforced polymers (CFRP’s) and a working prototype is demonstrated. The effort required developing principles for the design of high-strain composite flexural joints and their integration into angled composite panels. Designing LET arrays in angled panels is explored. Analysis of simple composite LET joints is presented for two degrees of freedom. Validation of the composite LET modeling is sought through numerical methods and empirical testing. Testing of several composite LET joint specimens is conducted and the results are reported. Results indicate that (while …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• TV News Report With Dr. Scott’s Expert Opinion about Dunwoody Apartment in Ruins After Explosion

Structure And Photocatalytic Influence Of N-Doping Ato Nano-Tubes On Antibacterial Activity Toward Escherichia Coli, Shing-Hoa Wang, Shiu-Mei Liu, Kan-Hung Hu, Chien-Chon Chen, Tai-Yuan Lin, Shuei-Wan Juang, Chia-Yuen Yen, Shu-Ting Lu, Chia-Heng Liu

Journal of Marine Science and Technology–Taiwan

The photocatalytic antibacterial properties of anodic titanium oxide (ATO) nanotubes in the anatase structure derived from annealing at 450°C or 550°C or N-doping treatment were tested on Escherichia coli under UV-A, visible light illumi-nation, and dark conditions. Under UV-A illumination and dark conditions, in most cases, E. coli cultures containing ATO nanotubes of different treatments showed either no or slight differences in their growth from the cultures without ATO nanotubes. However, under visible light illumination, the growth of E. coli was inhibited in cultures containing ATO nanotubes. Among the three forms of ATO nanotubes, N-doped ATO nanotubes had the strongest …

Effectiveness Against White Sharks Of The Rpela Personal Shark Deterrent Device Designed For Surfers, Craig Blount, Dan Pygas, Marcus P. Lincoln Smith, Daryl P. Mcphee, Colby Bignell, Ocean Ramsey

Journal of Marine Science and Technology–Taiwan

Many shark bites to humans, including fatalities, have involved surfers. Various personal shark deterrents are commercially available to surfers, including Rpela v2, which is a battery-powered device fitted to a surfboard. It produces an electric field around the surfer aimed at deterring sharks from approaching or biting by disrupting their electro-reception organs. The device was tested on white sharks (Carcharodon carcharias) at Salisbury Island, Western Australia. In total, 46 trials were done with the Rpela v2 either active or not active to determine the device’s effect on sharks’ response to a floating board with fish bait attached (to tempt a …

Inter-Annual Changes Of Water Temperature In The Southern South China Sea's Continental Shelf: The Influence Of Enso On Malaysian Waters, Afifi Johari, Mohd Fadzil Akhir, Muhammad Naim Satar, Zuraini Zainol, Guo Jingsong

Journal of Marine Science and Technology–Taiwan

An extensive amount of data from the World Ocean Database (WOD) that covers the southern South China Sea (SSCS) were analysed to study the long-term trends and variations of the El-Nino Southern Oscillation (ENSO) event. The WOD data were selected from 1951 to 2010, which included the area within 0–10 °N and 100–117 °E. El-Nino and La-Nina anomaly results showed that the sea surface temperature anomalies (SSTa) trend of SSCS was higher during offset-El-Nino years and lower during offset-La-Nina years. Besides, the inter-annual vertical water temperature profile revealed that the deepening of the warmer water temperature occurred in February and …

The Eumedonine Genera Eumedonus H. Milne Edwards, 1834, And Gonatonotus White, 1847 (Crustacea: Brachyura: Pilumnidae) In Taiwan, Peter K. L Ng, Chia-Wei Lin

Journal of Marine Science and Technology–Taiwan

Two species of eumedonine crabs, Eumedonus zebra Alcock, 1895, and Gonatonotus nasutus Chia & Ng, 2000, are recorded from Taiwan, the former for the first time. Both are also new genera records for the island. Notes on variation are noted and their taxonomy briefly treated. The number of eumedonine species, all of which are obligate symbionts on echinoderms, known from the island is now seven genera and seven species.

An Analysis Of Consumer Evaluations Of The “Tagonoura Shirasu” Certification Under The Japan Geographical Indication Protection System, Yu-Heng Lu, Takahiro Sajiki

Journal of Marine Science and Technology–Taiwan

Over time, the Geographical Indication (GI) protection system has been independently adopted in more than 100 countries worldwide. In Japan, the GI protection system has been operating since 2015 in response to a growing interest in local brands. Therefore, based on a questionnaire survey, we econometrically analyze the consumer evaluation of Shizuoka Prefecture’s Shirasu “Tagonoura Shirasu,” which is registered under the GI protection system. Shirasu is a collective term for long and narrow larvae such as anchovy (Engraulis japonicus), sardine (Sardinops melanostictus), or red-eye round herring (Etrumeus sadina). Based on the contingent valuation method, we clarified that consumers' additional willingness …

A Two-Stage Approach To Integrate Vessel Geo-Tracking Data And Logbooks For Monitoring Fishing Activity Of Coastal Fisheries In Waters Off Northwestern Taiwan, Yi-Jou Lee, Nan-Jay Su, Cheng-Hsin Liao, Wei-Chuan Chiang, Chun-Huei Li

Journal of Marine Science and Technology–Taiwan

Catch and fishing effort data are fundamental information to stock assessment and fisheries management, but difficult to obtain without the support of administration and sound fishery data collection system. This study integrated various sources of data from a simplified vessel geo-tracking system and logbooks from interviews with captains of coastal gillnet fisheries. We developed a two-step approach based on hierarchical cluster analysis to characterize the operation patterns and infer the fishing activities of the fishery. Results showed that the fishing effort in terms of operation duration could be estimated precisely for various vessel sizes, with catch composition and harvest information …

Effect Of Chlorine Dioxide On The Removal Of Sulfadimethoxine And Sulfamethoxazole In Freshwater And Seawater, Zhen-Hao Liao, Dai-Chee Ng, Yu-Sheng Wu, Fan Hua Nan

Journal of Marine Science and Technology–Taiwan

This study aimed to understand the fate of sulfonamides (SAs) under dark condition in a laboratory-scale aquatic system, and evaluate the removal of SAs by using Chlorine dioxide. Based on the mass spectrometry quantification, our results have shown that two sulfonamides were transformed at very slow rate in the dark. The 180 day degradation efficiencies (%) of sulfadimethoxine (SDM) in freshwater and seawater were 6.37 ± 2.56 and 4.38 ± 3.43, respectively, while those of sulfamethoxazole (SMX) in freshwater and seawater were 7.81 ± 2.15 and 6.60 ± 2.69, respectively. In the treatment of Chlorine dioxide for the removal of …

Long-Term Observations Of Interannual And Decadal Variation Of Sea Surface Temperature In The Taiwan Strait, Ming-An Lee, Wei-Po Huang, Yi-Lo Shen, Jinn-Shing Weng, Bambang Semedi, Yi-Chen Wang, Jui-Wen Chan

Journal of Marine Science and Technology–Taiwan

Long-term observations of interannual and decadal variation of sea surface temperature (SST) in the Taiwan Strait (TS) were studied for the period 1870–2018; the climatology data were obtained from the Met Office Hadley Centre, UK. In the study period, the highest annual mean and lowest SST observed were 25.3°C in 1998 and 22.4°C in 1919, respectively. Six distinct regimes were identified. The first regime of fairly stable or slightly cooling SST lasted through the 1920s. The two regime shifts of 1919 to 1945 and 1976–1977 to 1998 led to the two fast warming trends of 2.0°C in 26 years, from …

Experimental Investigation And Modeling Of The Response Surface Methodology For The Optimization Of A Multiloop Heat Pipe, Dar-Sun Liou

Journal of Marine Science and Technology–Taiwan

Considering thermohydrodynamic instabilities in the design of cooling systems has become a trend, which has led to the evolution of thermal management. However, such instabilities, which cause flow perturbations, are difficult to explain by using physical theories. The aim of this study was to use a parameter-based modeling technique, namely the response surface methodology (RSM), to characterize the dynamics of multiloop heat pipes (MLHPs) under various heat loads. The RSM, which is based on statistics, was used to determine the relationship between the design parameters and thermal responses of MLHPs, which are represented using polynomials. Th aim of our RSM …