Engineering Commons^™

Preparing School Leaders To Advance Equity In Computer Science Education, Julie Flapan, Jean J. Ryoo, Roxana Hadad, Joel Knudson

Journal of Computer Science Integration

Background and Context: Most large-scale statewide initiatives of the Computer Science for All (CS for All) movement have focused on the classroom level. Critical questions remain about building school and district leadership capacity to support teachers while implementing equitable computer science education that is scalable and sustainable.

Objective: This statewide research-practice partnership, involving university researchers and school leaders from 14 local education agencies (LEA) from district and county offices, addresses the following research question: What do administrators identify as most helpful for understanding issues related to equitable computer science implementation when engaging with a guide and workshop we …

Fully-Developed Fire Temperature In A Compartment With Varying Wood Fuel Loads, Keisuke Himoto, Masaki Noaki, Ken Matsuyama

Progress in Scale Modeling, an International Journal

Appropriate evaluation of fire behavior during the fully-developed phase is important for assessing the risk of building collapse and fire spread to adjacent buildings. In this study, a series of model experiments was conducted to investigate the fire behavior in compartments with varying wood fuel loads. Under small opening conditions, the increase in the wood fuel load had no notable effect on the heat release rate (HRR), but increased the fire duration and gas temperature. In certain cases, wood surface combustion continued even after flame ejection from the opening had ended, which maintained a high gas temperature for a long …

Open-Ended Hollow Coaxial Cable Resonator Sensor, Jie Huang, Chen Zhu, Rex E. Gerald Ii

Electrical and Computer Engineering Faculty Research & Creative Works

An open-ended hollow coaxial cable resonator probe configured to receive an aerosol sample for analysis. A metal post shorts the resonator's inner and outer conductors. A metal plate is spaced apart from an open end of the resonator by a dielectric layer that contains the received aerosol sample. Interrogator circuitry coupled to the resonator transmits an electromagnetic wave within the resonator and generates an electric field at the open end of the resonator. The interrogator circuitry is responsive to the generated electric field for determining a resonance frequency and an impedance of the resonator when the aerosol sample is present …

Ufuzzer: Lightweight Detection Of Php-Based Unrestricted File Upload Vulnerabilities Via Static-Fuzzing Co-Analysis, Jin Huang, Junjie Zhang, Jialun Liu, Chuang Li

Computer Science and Engineering Faculty Publications

Unrestricted file upload vulnerabilities enable attackers to upload malicious scripts to a web server for later execution. We have built a system, namely UFuzzer, to effectively and automatically detect such vulnerabilities in PHP-based server-side web programs. Different from existing detection methods that use either static program analysis or fuzzing, UFuzzer integrates both (i.e., static-fuzzing co-analysis). Specifically, it leverages static program analysis to generate executable code templates that compactly and effectively summarize the vulnerability-relevant semantics of a server-side web application. UFuzzer then “fuzzes” these templates in a local, native PHP runtime environment for vulnerability detection. Compared to static-analysis-based methods, UFuzzer preserves …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Undergrad Researcher to Present at National Conference

Correlation Of Segmental Lumbar Kinematics With A Wearable Skin Strain Sensor Array, Andrew Gibbons, Paul Mcmullin, Joseph Peterson, Spencer Baker, Kelly Clingo, Ulrike H. Mitchell, David T. Fullwood, Anton E. Bowden

Student Works

Introduction: Joint kinematics have been shown to be strongly diagnostic of underlying pathology in the knee, hip, shoulder, and ankle. However, the anatomical complexity of the spine has made obtaining accurate, segmental kinematics extremely challenging. Current approaches required specialized hardware (e.g., a dual x-ray system), or are highly invasive (e.g., bone pins implanted into the vertebrae). Recently, our lab has developed a wearable array of skin-mounted strain sensors that hopes to address this challenge. The purpose of the present work study was to quantify the utility of this array through comparison with real-time lumbar vertebral kinematics.

Materials and Methods: A …

Novel Insights Into Negative Pressure Wound Healing From An In Situ Porcine Perspective, Jacob G. Hodge, Ashley L. Pistorio, Christopher A. Neal, Hongyan Dai, Jennifer G. Nelson-Brantley, Molly E. Steed, Richard A. Korentager, David S. Zamierowski, Adam J. Mellott

School of Medicine Faculty Research

Negative pressure wound therapy (NPWT) is used clinically to promote tissue formation and wound closure. In this study, a porcine wound model was used to further investigate the mechanisms as to how NPWT modulates wound healing via utilization of a form of NPWT called the vacuum-assisted closure. To observe the effect of NPWT more accurately, non-NPWT control wounds containing GranuFoam™ dressings, without vacuum exposure, were utilized. In situ histological analysis revealed that NPWT enhanced plasma protein adsorption throughout the GranuFoam™, resulting in increased cellular colonization and tissue ingrowth. Gram staining revealed that NPWT decreased bacterial dissemination to adjacent tissue with …

Using Bibliometrics To Evaluate Outcomes And Influence Of Translational Biomedical Research Centers, Kristine M. Bragg, Gwen C. Marchand, Jonathan C. Hilpert, Jeffrey L. Cummings

Educational Psychology, Leadership, and Higher Education Faculty Research

Introduction. Federal grant funding to support infrastructure development of translational biomedical research centers is a form of public health intervention. Establishing rigorous methods for measuring center success and outcomes is essential to justify continued funding. Methods. Bibliometric data compiled from a 5-year funding cycle of a neurodegeneration and translational neuroscience research center was analyzed using the package bibliometrix for open source software R and the NIH-developed research tool iCite. Results. The research team and their collaborators (n=485) produced 157 grant-citing publications from 2015-2020. The science was produced by small research teams clustered around three main communities of topics: Alzheimer's Disease, …

The Design And Impact Of Unaccounted For Gas Reduction Policies For Natural Gas Distribution Network In Ireland And The United Kingdom, Utkarsha Chavan, Anthony Reynolds

Conference Papers

Unaccounted for gas (UAG) is the challenge faced by the natural gas industry which has financial, environmental as well as safety implications. The regulators have the authority to control the extent of the financial costs that can be passed on to the end-users by the transporters and distributors to recover the cost of UAG. There has been action taken by the regulators in Ireland and the United Kingdom to reduce the amount of UAG, which is beneficial to end-users as well as transporters and distributors. This paper discusses the design of the UAG calculation methodology of the distribution network. It …

Space And Defense – Volume Twelve – Number Two – Summer 2021, Space And Defense Journal

Space and Defense

No abstract provided.

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• ME Student to Compete on Netflix’s Baking Impossible

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• PCEC 2021-22 Faculty Research Seed Grant Awards Announced

Rotary Furnace Lining To Reduce Thermal Stress, Zamira Mukhamedbaeva, Erkin Kurbanov, Abduvali Mukhamedbaev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to reduce the thermal stresses of the lining in the areas adjacent to the flare sintering zone of rotary kilns intended for the production of cement clinker. It is proposed to use a lining made of parallel rows of alternating chamotte and chromium-magnesite refractory products to reduce thermal stresses in the areas adjacent to the flare sintering zone by up to 20%, increase the service life of the lining by 1.1-1.2 times as a result of equalizing thermal stresses in the areas of the sintering zone. Optimization of the initial raw material mixture, in …

Computer Simulation Of Particle Velocity In A Cyclone, Askar Artikov, Botir Usmonov, Dilshod Karabaev, Anvar Ulmasbaev, Lola Akabirova

CHEMISTRY AND CHEMICAL ENGINEERING

The article sets the goal of determining and calculating the speed of accelerated movement of particles in the gas-dust flow of an air cyclone, depending on the size of the cyclone, the physical properties of the particle and the gas-dust flow. A method for constructing a computer model of the motion of a particle in a roaring gas-dust flow of a cyclone is presented. The sequence of formalization of the computer model of the process of sedimentation of particles of a gas-dust flow of a cyclone unit is based on the theoretical foundations of aerodynamics and touches on the most …

Anti-Corrosion Protection Of Metal Parts Of Transportation Equipment With A Polymer Coating Based On Epoxiurethane, Aida Barkhanadjyan, Ravshan Khakimov, Botir Ibragimov, Oybek Vafayev, Dmitriy Ayrapetov

CHEMISTRY AND CHEMICAL ENGINEERING

Automotive vehicles are constantly exposed to corrosion processes, and the durability of metal parts depends on the intensity of corrosion. The loss of metals from corrosion is 8-10% of the initial metal mass. In total, losses from corrosion are 4-6% of national income in many countries. This indicates the need for research and the importance of scientific and technical work in this area. This can be achieved by developing a technology for producing anticorrosive compounds and applying them as protective coatings. The anticorrosive protection of a coating synthesized on the basis of local raw materials - epoxyurethane with an additive …

Synthesis And Research Of Silicon-Containing Phthalocyanine, Dilmurod Shukurov, Hayit Turayev, Abdulakhat Djalilov, Masud Karimov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this study is to synthesize, and study a new form of dye based on phthalocyanine, a silicon-containing phthalocyanine pigment used as a dye for dye-sensitive solar cells, which are currently third generation solar cells as one of the energy source alternatives. To achieve this goal, a silicon-containing phthalocyanine pigment containing urea, phthalic anhydride and sodium fluorosilicate was synthesized and studied. Based on the results of IR spectroscopy, the reaction of pigment formation is proposed and the data of scanning electron microscopy is presented. Its differential thermal analysis, photodynamic analysis and its relationship with inorganic and organic solvents …

Development Of The Composition Of A Composite Material Based On Thermoreactive Binder Ed-20, Umida Ziyamukhamedova, Gavhar Miradullayeva, Erkin Rakhmatov, Jasur Nafasov, Mavtuna Inogamova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to determine the effect of the type of structural modifier and filler on the structure formation and technological properties of potting composite polymeric materials (HCPM) and protective coatings for sheet and complex-configuration technological equipment, taking into account their rheological properties. Compositions of composite polymer materials based on a thermosetting binder of epoxy-diane resin ED-20 filled with a mineral filler - kaolin modified with gassipol resin (GS) - were developed using Newton's interpolation formula and the Lagrange method. The optimal amount of gossypol resin determined in the composition of the composite – in the amount …

Effect Of Talc On The Properties Of A Compound Based On Ethylene-Propylene Copolymer, Ikromjon Usmanov, Farrukh Kurbanbekov, Bobir Aykhodjaev, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to study the possibility of replacing Korean-made talc with inexpensive talc from an Afghan deposit, processed in Uzbekistan and used for the production of polypropylene compounds. In the future, these compounds are used for the manufacture of plastic car parts. A block copolymer produced by Uz Kor Gaz Chemical was chosen as a binder. For this, the influence of the content and type of talc on the properties of a compound based on an ethylene-propylene copolymer was studied.

The properties of the obtained compounds checked using ISO standards. The fractional composition of the studied …

Influence Of Sulfur Modification On The Properties Of Sulfur Concrete, Zhavkhar Khayitova, Khasan Beknazarov, Hayit Turaev, Abdulakhat Jalilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is the synthesis and study of modified sulfur concrete for use in industrial construction. To achieve this goal, sulfur concrete based on gossypol resin and pyrolysis distillate was modified and studied. The strength properties of sulfur-based concrete obtained from sulfur modified with gossypol resin and pyrolysis distillate were investigated. For the addition to sulfur concrete, industrial waste was used as a finely dispersed filler - fly ash from the Angren TPP and phosphogypsum generated at Ammophos-Maxam JSC. It was found that the best strength results correspond to sulfur-based concrete modified with gossypol resin using an …

Physical And Chemical Studies Of Overroof Rocks Of Clay Shales Of The Dzherdanak Deposit, Mastura Aripova, Ivan Levitskiy, Khabiba Khamidova, Odelbek Ammanov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is study of the physical and chemical properties of the overburden of the Dzherdanak deposit. The chemical and mineralogical composition of the overburden of the Djerdanak deposit has been studied by the methods of X-ray and thermography, electron microscopy and infrared spectroscopy. The main phases are quartz, kaolinite and muscovite. The study of the fine structure of the rock under an electron microscope showed the homogeneity of the rock with pronounced uniform inclusions, which is preserved even after firing. Changes in the rock after firing at 1050 °C have been determined. The formation of mullite …

On The Possibility Of Obtaining Effective Phosphoric Fertilizers As A Result Of Interaction Of Phosphorite-Containing Waste With Activated Glauconite Sands, Nargisa Takhirova, Fazlidin Khudoyberdiev, Shahlo Daminova

CHEMISTRY AND CHEMICAL ENGINEERING

These studies are devoted to the study of the chemical properties obtained as a result of chemical activation of glauconite and further neutralization of activated glauconite by waste products of phosphorite concentrates. Based on the results of X-ray structural studies of the obtained products, it is possible to obtain granular complex fertilizers after adding phosphorites to the system. Activation with mineral acids (nitric or sulfuric) should be carried out to accelerate the transformation of minerals from glauconite sands into an easily digestible form. Since the obtained compounds form an acidic environment, it is necessary to neutralize them. The neutralization process …

Study Of Sorption Of Rhenium Ions On Solid Extragents, Otabek Pardaev, Dildora Ilkhomjonkizi Khakimboeva, Shahlo Daminova, Ulugbek Sharafutdinov, Sharipov Khasan Turabovich

CHEMISTRY AND CHEMICAL ENGINEERING

In this work, the aim is to study the possibility of extracting rhenium from sulfuric acid solutions by sorption of impregnated sorbents based on polystyrene-divinylbenzene (MN202) and an organic reagent MAB (2-amino-1-methylbenzimidazole).New sorbent based on MN202 (Purolite) impregnated with organic reagents have been obtained and investigated. The sorbent characteristics determined using SEM, XRD and FTIR methods. The optimal conditions for the sorption of rhenium (VII) ions for the "element-sorbent" systems have been established. Under static conditions, the sorption of rhenium on impregnated sorbents in a sulfuric acid solution was studied in the periodic system with respect to the contact time, …

Nusat I: History, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "NUSat I: History" from October 5, 2021.

An Experimental Comparison Of Simple Measurements Used For The Characterization Of Sand Equestrian Surfaces, María Alejandra Blanco, Raúl Hourquebie, Kaleb Dempsey, Peter Schmitt, Michael L. Peterson

Biosystems and Agricultural Engineering Faculty Publications

Quantitative measurements of performance parameters have the potential to increase consistency and enhance performance of the surfaces as well as to contribute to the safety of horses and riders. This study investigates how factors known to influence the performance of the surface, incorporation of a drainage package, control of the moisture control, and introduction of a geotextile reinforcement, affect quantitative measurements of arena materials. The measurements are made by using affordable lightweight testing tools which are readily available or easily constructed. Sixteen boxes with arena materials at a consistent depth were tested with the Going Stick (GS), both penetration resistance …

Nusat I: History, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "NUSat I: History" from October 5, 2021.

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• GS engineering student competes on Netflix baking show

Defining The Innate Immune Responses For Sars-Cov-2-Human Macrophage Interactions, Mai M. Abdelmoaty, Pravin Yeapuri, Jatin Machhi, Katherine E. Olson, Farah Shahjin, Vikas Kumar, You Zhou, Jingjing Liang, Kabita Pandey, Arpan Acharya, Siddappa N. Byrareddy, R. Lee Mosley, Howard E. Gendelman

Nebraska Center for Biotechnology: Faculty and Staff Publications

Host innate immune response follows severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, and it is the driver of the acute respiratory distress syndrome (ARDS) amongst other inflammatory end-organ morbidities. Such life-threatening coronavirus disease 2019 (COVID-19) is heralded by virus-induced activation of mononuclear phagocytes (MPs; monocytes, macrophages, and dendritic cells). MPs play substantial roles in aberrant immune secretory activities affecting profound systemic inflammation and end-organ malfunctions. All follow the presence of persistent viral components and virions without evidence of viral replication. To elucidate SARS-CoV- 2-MP interactions we investigated transcriptomic and proteomic profiles of human monocyte-derived macrophages. While expression of the …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• 2021-22 Undergraduate Research Awards Announced

Optimal Tracking In Switched Systems With Free Final Time And Fixed Mode Sequence Using Approximate Dynamic Programming, Tohid Sardarmehni, Xingyong Song

Mechanical Engineering Faculty Publications

Optimal tracking in switched systems with fixed mode sequence and free final time is studied in this article. In the optimal control problem formulation, the switching times and the final time are treated as parameters. For solving the optimal control problem, approximate dynamic programming (ADP) is used. The ADP solution uses an inner loop to converge to the optimal policy at each time step. In order to decrease the computational burden of the solution, a new method is introduced, which uses evolving suboptimal policies (not the optimal policies), to learn the optimal solution. The effectiveness of the proposed solutions is …

Examining Thermal Management Strategies For A Microcombustion Power Device, Bhanuprakash Reddy Guggilla, Jack Perelman Camins, Benjamin Taylor, Smitesh Bakrania

Henry M. Rowan College of Engineering Departmental Research

Microcombustion attracts interest with its promise of energy dense power generation for electronics. Yet, challenges remain to develop this technology further. Thermal management of heat losses is a known hurdle. Simultaneously, non-uniformities in heat release within the reaction regions also affect the device performance. Therefore a combination of thermal management strategies are necessary for further performance enhancements. Here, a bench top platinum nanoparticle based microcombustion reactor, coupled with thermoelectric generators is used. Methanol-air mixtures achieve room temperature ignition within a catalytic cartridge. In the current study, the reactor design is modified to incorporate two traditional thermal management strategies. By limiting …