Engineering Commons^™

Research Into Modular Construction, Richard L. Tash

Retrospective Theses and Dissertations

No abstract provided.

High Pressure Flange Design, Kermit Frederick Allerman

Retrospective Theses and Dissertations

This research report summarizes high pressure flange design techniques and considerations utilized by Pratt & Whitney Aircraft, Florida Research & Development Center, during its development programs for high pressure liquid rocket engines. The report covers: 1) Aspects of cooling, heating, pressure, and external loading with design safety factors 2) Cantilever type flanges optimized for weight 3) Seals and fastener considerations for 6000 psi environment 4) An example high pressure, cryogenic cantilever flange design

Conversion And Validation Of Sigart Program, A Progressive Traffic Signal Lights System Computer Model, Dennis F. Troyan

Retrospective Theses and Dissertations

The purpose of this research paper was to translate a Computer Model (SIGART), capable of simulating a progressive traffic signal lights system, from Burroughs B5500 FORTRAN II to the IBM 360 FORTRAN IV computer language, to outline the program algorithm, to set up detailed program documentation and to validate this model by applying practical system data. Expansion of the SIGART program by addition of an option to produce a time space plot of the output data utilizing a Calcomp plotter was also to be considered.

The Heat Treatment Of Soil By Microwaves To Control Pathogenic Parasitic Fungi, Dean Franklin Rich

Retrospective Theses and Dissertations

No abstract provided.

An Investigation Of Thermal Energy Potential In Florida Lakes As A Power Source To Arrest Conditions Of Oxygen Deficiency, John. Jackson

Retrospective Theses and Dissertations

No abstract provided.

Automation In Banking, Donald P. Matteson

Retrospective Theses and Dissertations

It has been estimated that the Apollo Program, which placed a man on the moon, each year produced enough paper work, that if put on one stack, would reach to the moon. The forthcoming Space Shuttle Program will require even more documentation; however, present plans call for very little paperwork. The necessary documentation will instead be created, updated and retained in a large computer data base with access throughout the country. Present technology will support this system. The banking industry has been faced with a similar problem in the processing of demand deposit records (checks) and other repetitive tasks. Banks …

The Restoration Of Lake Waters, Charles James Boyter

Retrospective Theses and Dissertations

Lake restoration procedures are reviewed with the objective of making recommendations toward future lake restorations for central Florida lakes. The progress of drawdown for restoration is examined. A total phosphorus model is developed for Lake Eola to predict the success of the drawdown. No one restoration procedure should be applied to every lake in central Florida. Each situation must be studied separately. It appears that lake drawdown was the best technique to use for Lake Eola. However, the stormwater inputs and free-flowing drains must be purified to insure the success of the drawdown or the Lake will return within the …

The Operations Research Approach For An Effective Management Information System, Joel L. Mutzman

Retrospective Theses and Dissertations

This report serves as an overview to the design of an effective Management Information System (MIS) by incorporating the modeling techniques of an Operations Research (OR) approach. It will be shown that the consideration of OR input requirements mixed with the information requirements for a data base existing at the everyday accounting and operational level creates a responsible management control and decision-making tool. This mix of OR and everyday information approach varies as a function of the managerial activities and the organizational level of effort. In lieu of designing a "total" MIS system, MIS designers should structure a loosely connected …

Electrostatic Precipitation, Robert C. Hinsey

Retrospective Theses and Dissertations

No abstract provided.

Sinkholes In Florida And Their Effect On Man's Environment, Gregory Jackson Skinner

Retrospective Theses and Dissertations

The primary reason for making the research study on "Sinkholes in Florida and Their Effect on Man's Environment", is an interest in learning more about this somewhat unique phenomenon and how it is likely to affect man in the future, particularly here in Central Florida. This is significant at this time in view of the large number of existing sinkholes, the frequency of occurrence, the projected population and economic growth, and the possible impact this growth may have on future sinkhole occurrences. The research concentrated on possible causes, effects, frequencies, locations and mean of predicting future sinkhole development. There is …

Survey Of Instrumentation For Air Quality Surveillance, John Bowling

Retrospective Theses and Dissertations

No abstract provided.

A Mathematical Model For Determining The Thermal Distribution Resulting From Discharge Of A Heated Effluent, Alan H. Epstein

Retrospective Theses and Dissertations

A mathematical model is presented for the problem of determining the two-dimensional temperature distribution resulting from the discharge of a heated effluent into a shallow, quiescent receptacle. The physical model of the problem is the two-dimensional jet augmented by an imposed condition of viscous drag due to bottom friction effects. By virtue of the assumption that the physical properties of the effluent are independent of temperature over the operational temperature range of the plume, the analysis separates the total problem into a flow problem and a temperature problem. Solution of the temperature distribution is accomplished both analytically and numerically. Analytically, …

Suppression Of Turbofan And Turbojet Engine Generated Noise, Harry David Master

Retrospective Theses and Dissertations

Every advance in the transformation of heat energy into mechanical energy has involved a noise problem, and in general it increases with the power production. The jet airplane is a good example: the large-scale turbulence of the exhaust gases in the jet forms an unusually intense source of sound the control of which is quite difficult. The additionally generated fan noises add characteristic fan tones which are particularly noticeable on landing approaches. the human ear is the vulnerable receiver of these noises, and the problem becomes one of deciding how much jet engine noise reduction is required for the comfort …

Data Management For A Police Command/Control Simulation Study, Gerald Louis Locasale

Retrospective Theses and Dissertations

The primary purpose of this thesis is to aid the Orlando Police Department locate areas of improvement with the effect of reducing the total response time of the Command/Control Center through the application of basic industrial engineering techniques. This work is presented in three major chapters. The first is concerned with the definition of the present operation of the Center, the total scope of each separate function within the Center and the interactions with the general public and other public safety departments. The second chapter develops the studies which provide the input values for the simulation model and the analysis …

Asynchronous Digital Multiplexing, Carlos F. Ojeda

Retrospective Theses and Dissertations

No abstract provided.

Feasibility Study Of A New Approach To Resolve Radar Range Bin Ambiguity, Donald Shue Yee

Retrospective Theses and Dissertations

This report describes the study of a new approach to resolve pulse radar range bin ambiguity problem. The nature and the cause of the problem are discussed, and various methods presently used to solve this problem are presented. The report points out the disadvantages of these methods and, thus, introduces a new approach to resolve the radar range bin ambiguity problem by examining the reasonableness of the trajectory of the object being traced. Necessary algorithm and computer programs to support the study are given in Appendices I, II, and III.

The Application Of Impact Dampers To Continuous Systems, Ranjit Kumar Roy

Doctoral Dissertations

"A study has been made of the application of impact dampers to two types of continuous systems, a simply supported and a clamped beam. Previous efforts have included the effect of impact dampers on single degree of freedom and other systems with finite numbers of degrees of freedom.

Experimental models were tested in the laboratory and finite element computer programs were developed to calculate response. Results from calculations agree favorably with experimental tests. Further, results from the first few natural modes also compare reasonably with data published on systems with finite number of degrees of freedom.

Curves are presented which …

Digital Spectrum Analyzer Systems: A Model And System Implementation, Richard Ray Kuenzer

Doctoral Dissertations

"This thesis introduces digital spectrum analyzer systems and presents a generalized model which can be used to implement new systems. The model is presented using the Digital Design Language (DDL) to facilitate system programming. Three hardware systems are defined and their merits are considered. Procedures are given to aid in implementing an analyzer system on a wide range of hardware configurations. A digital spectrum analyzer system which was implemented at the University of Missouri - Rolla and is presently being used by electrical engineering students is presented. This system utilizes the IBM 360/SO computer located in the Computer Center at …

Methods And Applications Of Systems Identification, Allen Glenn Behring

Doctoral Dissertations

"A "Schmidt filter" is proposed to compute an optimal orthonormal basis for a set of "noisy" filter input functions. Procedures for determining the transfer function and inverse transfer function of the filter are given. The Schmidt filter is applied to the problem of determining mathematical models of discrete, stationary, linear, dynamic systems for the case where measurements may be corrupted by noise of unknown statistics. The identification problem is reconsidered for the case where noise and signal moments are specified. Procedures are given which insure unbiased, adaptive estimates of system order and parameters for this case. These theoretical propositions are …

Experimental Study On Viscoelastic Properties And Fracture Characteristics In Polymers, Debaranjan Mohanty

Electronic Theses and Dissertations

The research reported in this thesis is undertaken with the following objectives:
1. To determine the viscoelastic properties of polymers on creep test under constant load;
2. To determine the internal friction (loss factor) of polymers under periodic loading condition;
3. To determine the delayed time or life time on fracture of the polymer under constant loading ; and
4. To verify the relationship, theoretically predicted, between the time to fracture and the material characteristics of the polymer with experimental observations.

The Plasma Polymerization Of Vinyl Monomers. I. The Design, Construction, And Operation Of An Inductively Coupled Plasma Generator And Preliminary Studies With Nine Monomers, L. F. Thompson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

An apparatus was constructed which would allow vinyl‐type monomers (and others) to polymerize at ambient temperatures in the presence of an inductively coupled RF field. The details of the construction of the system are reported along with preliminary results obtained from nine monomers: styrene, methylvinyldichlorosilane, vinyl acetate, acrylonitrile, vinyl fluoride, 1,1‐difluoroethylene, vinyl chloride, ethylene, and 1,3‐butadiene. Copyright © 1972 John Wiley & Sons, Inc.

Saturated Enthalpies For Mixtures Of Propane And Propene, David B. Manley, George W. Swift

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

The Plasma Polymerization Of Vinyl Monomers. Ii. A Detailed Study Of The Plasma Polymerization Of Styrene, L. F. Thompson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A study has been made on the plasma polymerization of styrene monomer in a cold, low‐power, inductively coupled RF plasma. Styrene monomer yielded an insoluble, crosslinked film which was slightly colored. A kinetic study is reported for styrene. The effects of power level, bleed rate of monomer, pressure, and reactor geometry on the rate of polymer formation are reported. A mechanism is postulated for plasma polymerization. It was found that the initiation step was the rate controlling step and that the reaction followed a cationic polymerization scheme. Both crosslinking and discoloration of the polymers occur at the time of polymerization …

Characterization Of Poly(Methyl Methacrylate) From Radiation‐Induced Polymerization In The Presence Of A Kaolin Clay Substrate, J. J. Beeson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Two types of polymer are formed in the radiation‐initiated polymerization of methyl methacrylate (MMA)–kaolin clay complexes. Homopolymer can be extracted from the complex by the use of organic solvents. Inserted polymer must be removed by dissolution of the polymer–clay complex with hydrofluoric acid. The polymers formed show no differences in structure (as determined by infrared analysis), had high molecular weights (1–5 x 106), and had similar molecular weight distributions (as determined by GPC). The molecular weights of the homopolymer increased as temperature increased (25°–75°C), and dose rate decreased (24.9–7.35 rads/sec). The isotacticity of the polymers when compared to irradiated bulk …

An Experimental And Numerical Study Of Elastic Strain Waves On The Center Line Of A 6061-T6 Aluminum Bar, J. L. Habberstad, K. G. Hoge, J. Earl Foster

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The elastic strain waves resulting from the impact of two 3/4-in-dia 6061-T6 aluminum bars are studied experimentally and analytically. Experimental data are obtained from strain gages on the center line and outer surface of the bar, located at various distances from the impact end of the bar. Experimental data are compared to numerical results obtained from integrating the exact equations of two-dimensional motion. In general, agreement between the numerical and experimental results is very good. © 1972 by ASME.

An Application Of Bubble Shape Theory To The Determination Of Air Transfer Through Adsorbed Surface Films, Robert A. Medrow

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Magnetohydrodynamic Stability Of The Developing Laminar Flow In A Parallel-Plate Channel, T. S. Chen, T. E. Eaton

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Linear stability of the developing laminar flow of an electrically conducting, incompressible fluid in a parallel-plate channel under a transverse magnetic field is investigated. The case of small magnetic Reynolds numbers is treated. The developing flows whose stability characteristics are studied correspond to those induced by a uniform and a parabolic velocity distribution at the channel inlet. The stability of the fully developed Hartmann flow is also reexamined. Neutral stability curves and axial variations of the critical Reynolds number are presented for a range of Hartmann numbers between 0 and 4. It is found that for Hartmann numbers larger than …

Finite-Element Analysis Of Pressure Vessels, Robert L. Davis, H. Dean Keith

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The finite-element technique has been applied in the analysis of a variety of pressure vessel problems. The example problems described in this paper suggest that the finite element method is perhaps the most suitable means currently available for obtaining quick and accurate solutions for real-life pressure vessel problems. Finite-element programs can be used by the practicing engineer. Companion programs are available that can be used to check the input data and graphically display both the input and output data. © 1972 by ASME.

A Strain Energy Comparison Of Discrete Modeling For Vibrating Continuous Systems, S. K. Tolani, Richard Dale Rocke

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Lumped parameter models commonly used to describe continuous one-dimensional and Bernoulli-Elder beam vibration problems have been compared on the basis of maximum system, strain energy. The consistent mass matrix approach has been included in the comparison. Standard matrix techniques have been employed to mathematically obtain desired solutions. Closed form solutions and solutions via the models to Ike system strain energy were obtained for all systems in three dynamic states: Free vibrations, constant base acceleration, and half sine base acceleration. Behavior of the strain energy errors, in general, were found to be similar to those of the frequency root errors. © …

An Incrementally Distributed Mathematical Model Of A Watershed, Charles Arnold Onstad

Electronic Theses and Dissertations

The utilization of distributed input parameters enables hydrologists to more adequately cope with watershed management problems. A distributed system aids in evaluating alternative solutions designed to alleviate a problem situation. As a result, the objectives of this study were (1) to develop a hydrological framework delineating the surf ace configuration of a watershed to consider parameter distribution; (2) to develop a model of hydrologic performance of a watershed using existing techniques and amenable to the physical framework; and (3) to demonstrate the versatility of the model using hypothetical data. The model versatility was demonstrated by showing the effects of different …