Engineering Commons^™

The Role Of Rainfall Impact And Surface Flow In Soil Detachment And Transport, Robert Alan Young

Electronic Theses and Dissertations

Soil erosion caused by rainfall is a very complex physical process. To evaluate the mechanism of erosion so that an assessment can be made of the extent to which it may be controlled necessarily begins with an understanding of the basic fundamental factors involved. The purpose of this study involves the development of an insight of the relative importance of the roles played by various contributors to the erosion process. Particular emphasis is placed on the contribution of rainfall detached soil to total soil loss. Three soil types, Barnes loam, Crofton silt loam and Central sandy loam, were prepared with …

A Simulation Of Sediment Deposit In Open Channels, Tsan-Wen Wang

Electronic Theses and Dissertations

In this study, two mathematical models have been developed to simulate sediment deposition in open-channel flow; a model based on three characteristic equations and a model based on two characteristic equations. A set of three partial differential equations for one dimensional transient flow with homogeneous density was provided to explain the mechanics of the phenomenon. By the method of characteristics, three partial differential equations were transformed into a set of three ordinary differential equations or a set of two ordinary differential equations by simplification in which the change of sediment layer thickness with respect to distance was assumed to be …

Analysis Of Variation Of River Flow And Water Quality In The White River Basin, Michael Stephen Thompson

Electronic Theses and Dissertations

The main objectives of this White River Basin study were to analyze flow variation records, to investigate existing river water quality data as compared with the designated beneficial uses for the basin and to consider the influence of present and future irrigation development. Data were collected from a number of sources and brought together for interpretation with respect to these objectives. The streamflow study utilizes the streamflow records from 10 gaging stations in the White River Basin. It is expected that the results of this investigation may be of assistance to the South Dakota Water Resources Commission and the South …

The Hydraulics Of Waste Stabilization Ponds, Gary Z. Watters

Reports

The treatment efficiency of waste stabilization ponds depends primarily on the biological factors of type of waste and organic loading. However, the biological activity in a pond is greatly influenced by the environmental conditions of temperature, wind, sunlight, and the hydraulic flow patterns. In the past little attention has been given to the hydraulic characteristics of waste stabilization ponds such as the gross flow patterns within stabilization ponds as affected by the shape of the pond or lagoon, the presence of dead spaces, and positioning of inlets and outlets and the degree of density stratification. These hydraulic flow characteristics will …

The Great Salt Lake And Utah's Water Resources , Utah Water Research Laboratory

Reports

Introduction: It is appropriate to introduce these proceedings with a brief description of this history and objectives of the American Water Resources Association (AWRA). Quoting from a recent information borchure published by the AWRA, it is a non-profit, scientific organization that was incorporated in the State of Illinous in March, 1964, with headquarters in Urbana, Illinois. A major factor in the establishment of the AWRA was the need for an organization to encourage and foster interdisciplinary communication between professionals of diverse backgrounds working on all aspects of water resources problems. The principal objectives of AWRA are stated briefly as follows: …

Optimizing Resistance Coefficients For Large Bed Element Streams, D. E. Overton, Harl E. Judd, C. W. Johnson

Reports

This is a report of a comparison of Darcy resistance coefficients calculafed for previously reported laboratory data and those calculated for large bed element streams. Large bed element (LBE) streams exist frequently in nature where rocks derived from valley walls or from channels cutting through ancient glacial or fluvial deposits are moved only under conditions of extreme flood. The height of bed elements is a significant part of the mean depth of flow. The stream gradients are high and are quite stable for all but the highest flows.

Effects Of Land Use On Water Quality: Summit Creek, Smithfield, Utah, David W. Meyers, E. Joe Middlebrooks, Donald B. Porcella

Reports

The effects of various land uses on water quality in Summit Creek were evaluated during the period beginning March 13, 1971, and ending October 27, 1971. Potential sources of pollution investigated where: (1) septic tank use, (2) feedlot runoff, (3) urban runoff, (4) rural runoff. Samples were collected from five sampling stations on 16 separate days during the sampling period. Analyses were performed to determine the following constituents: ammonia, nitrite, nitrate, total phosphorus, orthophosphate, coliform bacteria, chloride, suspended solids, volatile suspended solids, total carbon, organic carbon, temperature, and pH. Agricultural activates, including livestock feedlot operations, were identified as the major …

Experimental Study Of Water Hammer In Buried Pvc And Permastran Pipes, Roland W. Jeppson, Gordon H. Flammer, Gary Z. Watters

Reports

No abstract provided.

Model Study Of The Manifold To Be Used As A Component Of The Virginia Electric And Power Company, 1974 Extension Of Yorktown Power Station, Roland W. Jeppson, Calvin G. Clyde, Charles Kincaid

Reports

Introduction: This report describes the fabrication and laboratory testing of a 1/12 scale model of the 5 branch converging manifold to be installed as a component of the Virginia Electric and Power Company 1974 extension of the Yorktown power station. The design of the manifold (see Fig. 1) was supplied by Brown & Root, Inc. The geometry of Branch number 1 as shown on Fig. 1 was modified slightly from the original design after conferring with Browth & Root, Inc. in order to facilitate the fabrication of this branch of the model. In addition to the fabrication of the manifold …

Studies To Develop And Investigate An Inverse Formulation For Numerically Solving Three-Dimensional Free Surface Potential Fluid Flows, Roland W. Jeppson

Reports

An inverse formulation is developed for solving three-dimensional potential fluid flows which considers the magnitudes of the cartesian coordinates x, y, and z as the dependent variables in the space defined by the potential function and two mutually orthogonal stream surface functions whose intersection defines the physical space streamlines. This formulation reverses the usual role of the variables. In this inverse space irregular boundaries, with unknown position in the physical space, such as free surfaces become plane boundaries, and the space of most potential flow problems is a parallelepiped. The basin partial differential equations resulting from this formulation are nonlinear …

Limitations Of Some Finite Difference Methods In Solving The Strongly Nonlinear Equation Of Unsaturated Flow In Soils, Roland W. Jeppson

Reports

No abstract provided.

Relationships Of Infiltration Characteristics To Parameters Describing The Hydraulic Properties Of Soils, Roland W. Jeppson

Reports

No abstract provided.

Calibration Of Parshall Flumes With Non-Standard Entrance Transitions, Cheng-Lung Chen, Calvin G. Clyde, Min-Shoung Chu, Chi-Yuan Wei

Reports

The 9-ince and 18-inch Parshall flumes with the throat section installed level with the bottom of an incoming pipe were tested. The measured discharges for given flow depths (free flow) or differences in flow depths (submerged flow) were found to deviate quite significantly fromt he computed standard Parshall flume disharges at both low and high flow rates. New empirical formulats have been developed to take such deviations into account. It is noted that values of the coefficients and exponents contained in the new formulas depend on the throat size of the flume and the slope of the incoming pipe. Calibration …

Water Resources Planning To Satisfy Growing Demand In An Urbanizing Agricultural Region, Thomas C. Anderson

Reports

Although it is condeded that an adequate supply of water is essential to economic growth and development, what constitutes an "adequate" supply is often controversial and difficult to determine. The problem can be solved by applying basin economic concepts: determining the value of water be estimating its supply and demand. This report demonstrates one method for doing this. The theory of the demand for irrigation water and its empirical application are discussed. An example problem based on data from one of the sub-regions of the study area (the Jordan River Basin of Utah) is presented to illustrate the method. The …

Chronological Listing Of Research Reports, Division Of Research, Kentucky Department Of Highways

Kentucky Transportation Center Research Report

No abstract provided.

Experimental Overlay Of Glazon Over Two Bridge Decks, Assaf S. Rahal, A. B. Blankenship

Kentucky Transportation Center Research Report

In accordance with a Personal Service Agreement entered into with the Glazon Industries, Inc., on July 2, 1971, the two subject decks were patched and overlayed with Glazon. On July 27, 1971, work started on RP 106-286-HG3, KY 395 bridge over I 64 in Shelby County. Work consisted of routing old concrete and sandblasting the surface (Figures 1 and 2). State personnel and equipment were used for all cleaning operations. The same procedures were followed to clean HM 99-1324A-MB3 in Powell County near Clay City.

On July 28, 1971, Glazon personnel and equipment arrived at the work site in Shelby …

Subject Listing Of Research Reports, Division Of Research, Kentucky Department Of Highways

Kentucky Transportation Center Research Report

No abstract provided.

Test 1091: Deutz D60 06 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1099: International Utility 574 Diesel (Also International 574 Row Crop Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1100: John Deere 6030 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1101: John Deere 7520 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1094: International Farmall 766 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1103: Case 1270 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1104: Deutz D55 06 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1107: Long R9500 Special Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1111: John Deere 4030 Quad-Range Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1116: International 4166 And 4186 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1112: John Deere 4230 Quad-Range Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1115: International 354 Gasoline 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

A National Survey Of Manpower Utilization And Future Needs Of Consulting Engineering Firms Engaged In Water Pollution Control, E. Joe Middlebrooks

Reports

Introduction: As part of the overall evaluation of manpower needs in the environmental field, a survey of architectural and engineering firms was jointly sponsored by the Consulting Engineers Council, the American Association of Professors in Sanitary Engineering and the Environmental Protection Agency. A questionnaire was mailed to 8,.5. engineering and architectural firms that subscribe to the magazine