Engineering Commons^™

The Effect Of Unreinforced Cutouts On The Buckling Of Thin Conical Shells Loaded By Central Axial Compression, Garla Arjuna

Mechanical & Aerospace Engineering Theses & Dissertations

Analytical trends for the linear bifurcation buckling of thin isotropic right-circular-conical shells with unreinforced cutouts are investigated. Clamped, constant-thickness conical shells with homogeneous, isotropical material properties are analyzed for uniform axial compression. The buck­ ling loads are obtained by the use of the STAGS (Structural Analysis of General Shells) computer program which is based on a finite difference numerical approach. Variables defining the geometry of the cutout and the cone are nondimensionalized and the relationship between the nondimensional buckling load and nondimensional cutout parameter is established. A range of the cutout sizes is investigated for which linear bifurcation buckling results …

The Theory Of Multiple Measurements Techniques In Distributed Parameter Systems, Babajimi Claudius Okunseinde

Dissertations

A comprehensive theory of multiple measurements for the optimum on-line state estimation and parameter identification in a class of noisy, dynamic distributed systems, is developed in this study. Often in practical monitoring and control problems, accurate measurements of a critical variable are not available in a desired form or at a desired sampling rate. Rather, noisy independent measurements of related forms of the variable may be available at different sampling rates. Multiple measurements theory thus involves the optimum weighting and combination of different types of available measurements. One of the contributions of this work is the development of a unique …

A Study Of An Adiabatic Tubular Reactor For The Multiple Chlorination Of Methane, Richard L. Braun

Theses

A computer program has been developed which simulates the multiple chlorination of methane in an adiabatic, tubular reactor. Euler's method is used to approximate the solutions of the programs differential equations.

The program is designed to determine the amount of an inert diluent required in the feed stream to attain some specified conversion of methane in a safe and efficient temperature range. Particular emphasis is put on determining the amount of diluent required to attain 98% conversion of methane at an outlet temperature of 723°K. The program also determines the reactor volume necessary to achieve the specified conversion, and the …

Solvents Screening For Hydrocarbons Separation Of Close Molar Volumes, Dilip K. Kapasi

Theses

The approximate physical model for solute-solvent inter?actions presented by J, M, Prausnitz and R, Anderson¹ is briefly discussed, Applicability of Weimer, Prausnitz³ and Helpinstill, Van Winkle⁷ models is investigated using experimental values of activity coefficients for C₅ hydrocarbons in 13 solvents including one nonpolar and 12 polar solvents. Independent correlations, based on our experimental values at 45°C for normal and isopentane have been developed. Although the required thermodynamic properties are obtained through a comparative analysis of all the available and estimated methods, dependable values of activity coefficients for Isopentane and 1-Pentene could not be obtained through …

The Effect Of Dry-Blending High Density Polyethylene On Final Product Properties, Charles H. Klestadt

Theses

The incentives for Dry-Blending Polyethylenes of varying property type may be economic gain, improved product quality, or both. The manufacturers' latest mode of operation involves seeking to meet their customers' needs with a product line made by using one catalyst system and operating at maximum capacity, while varying the fewest possible control parameters. Off-spec materials and on-spec materials not fitting customers' requirements are two prime targets for additional profits with proper dry blending techniques. The approach used in solving the problem involved starting with an existing product line and converting these products into a number of experimental blends. The blends …

The Determination Of An Optimum Plant Capacity In A Dynamic Economy, Frederick Louis Monesmith

Theses

A. Monte Carlo computer program has been developed in which the optimum plant capacity is determined by comparing calculated profitability criterions for various plant capacities. The estimates for input variables are developed into probability distributions. This data is then used to calculate a probability distribution for a-profitability criterion. In this thesis approximately thirty input variables are developed into beta distributions. Each variable must be estimated with a ninety percent probability estimate, a most likely probability estimate and a ten percent probability estimate. The three level estimates for each variable completely describe the beta distribution. Approximately half of the beta distributions …

Industrialized-Subsidized Housing In The Hackensack Meadowlands, Andrew Carl Gildersleeve

Theses

New Jersey as well as the rest of the nation is beginning to feel the pinch of what has been termed the housing crisis. The products of the World War II baby-boom are now reaching the age where they require homes of their own, making the demand for good quality low-cost housing very high. At the same time, the demand for good public housing continues to grow and we are learning that our previous efforts in this field have been far from satisfactory.

In the course of this study I have looked into the possibilities of solving a portion of …

Rheo-Optical Properties Of Polyisobutylene, Russell B. Biss

Theses

This study presents quantitative experimental data on the various stress-optical characteristics of polymer liquids, specifically, polyisobutylene. Through the use of a concentric cylinder rheogoniometer and a rotational viscometer, the temperature effects of a newtonian polyisobutylene liquid. was studied and was found to have a stress-optical coefficient independent of shear stress and minor temperature changes. The experiments confirm that the birefringence is a known function of the extinction angle and the shear stress. Various polyisobutylene liquids were used in a simple flow device to observe the birefringence in the 1-3 plane and the 2-3 plane. The results indicate that the 1-3 …

The Steady State Heat And Temperature Distribution Of A Hot Sphere Within An Infinite Wedge, David W. Horwat

Theses

This thesis presents a mathematical model of the steady state heat and temperature distributions of a hot sphere located along the midplane of an infinitely long wedge of any arbitrary central angle. The heat and temperature distributions of this geometric configuration are of immense value, since through the use of this model as a wedge shaped unit cell the description of any number of hot spheres, arranged in a regular planar array can be immediately determined.

The method of reflections is used to solve Laplace's equation , V²T=O , analytically using the sphere and the wedge walls as …

Optimal Performance Of Equilibrium Parametric Pumps, Joseph A. Manganaro

Theses

An examination of the conditions required to obtain the optimal performance of semicontinuous and continuous parametric pumps, defined by the achieving of the maximum possible solute free product for a given column height, was undertaken. The model system sodium nitrate ? water on an ion retardation resin adsorbate was employed. Equations defining maximum values of certain important parameters such as the bottom product flow rate and reservoir displacement rate were developed by extending previous theories of parametric pumping. Experimental runs were carried out using parameters whose values were both less than and greater than the maximum values predicted for optimal …

The Thermal Degradation Of Polyvinyl Alcohol, Carlos Eduardo Ortiz

Theses

The thermal degradation of polyvinyl alcohol has been investigated using mass spectrometry, differential thermal analysis, and infrared spectroscopy unlike previous investigators, formaldehyde and acrolein were not observed volatiles. In addition, acetic acid was observed, a product not reported previously.

A Study Of The Vibrational Spectra Of Some Monosubstituted Pyridines, Hussein Ibrahim Abdel-Shafy

Theses

Infrared spectra in the range (4000-250 cm^-1) and Raman spectra in the range (4000-150 cm^-1) of pyridine, 2-, 3- and 4-chloro-, bromo-, and methylpyridines, 2-fluoro-, 2-amino and 4-ethylpyridines have been measured. The spectra, vibration and assignments of the observed frequencies of 2-amino-, and 4-ethylpyridines are presented for the first time. The infrared data for 2-fluoropyridine is combined with the previously reported Raman data of Stephenson and Voelz to allow complete vibrational assignments for this compound for the first time. Frequency assignments for the other molecules are re-examined and where necessary changes and/or additions in frequency assignments …

The Study On The Soot Formation Of Hydrocarbon Flames, Yih-Jian Wu

Theses

Carbon formation during the quenching of low-pressure premixed hydrocarbon flames was studied using rapid-scanning optical and mass spectroscopy. Experimental techniques were developed and it was found that the tendency to form soot was a function of the hydrocarbon chain length. These results are relevant to the design of restartable space engines in which the use of hydrocarbon fuels is contemplated because the formation of soot in space will result in the formation of a shroud around the spacecraft which will adversely affect sensing by optical means.

Electronic Color Scanners, Kenneth Francis Hird

Graduate Research Papers

Process color photography has been continually developing for many years. In fact, color printing techniques are still benefiting, through additional sophisticated requirements, and from a discovery made about 300 years ago. At that time Sir Isaac Newton, British scientist, mathematician • and philosopher, placed a glass prism in the path of a narrow beam of sunlight entering his room through a pinhole in an opaque window shade. He determined that ordinary white light is a mixture of colored lights.

Unfortunately, in practice, ideal pigments for three-color inks do not exist and this impasse greatly complicates the job for the photo-processor. …

Gasket Or Squeegee Painting, Virgil J. Berg

Graduate Research Papers

This investigation was undertaken with the purpose of revealing and developing a method of gasket or squeegee painting which could be successfully implemented in any industrial arts laboratory. Specific objectives of the study will be to determine the answers to the following questions:

1. Of what does the process consist?

2. What industries or manufacturing concerns are using the process?

3. Is the process satisfactory for use in the industrial arts laboratory?

4. Is the process economically feasible for student use?

5. Is the process within the range of average student ability?

6. Can equipment for the process be developed …

Resonant Footing Test Apparatus, Bobby O. Hardin, Woodrow W. Thurman

Civil Engineering Faculty Patents

An apparatus for conducting resonant footing tests upon undisturbed soils includes an oscillatable mechanical structure with attachable electrical means for causing both oscillation of the structure and measurement of the behavior of the soil under test. The apparatus is transportable to the site at which the test is conducted on soil in-situ, and is adapted to be employed under selective loadings applied downwardly upon the oscillatable structure.

Identification Of Hazardous Locations On Rural Highways In Kentucky, Charles V. Zegeer

Kentucky Transportation Center Research Report

The purpose of this study was to determine the most effective method of identifying hazardous locations for on-site investigations. To decrease the possible effect of random or spurious accidents on the identification of hazardous locations, a 0.3-mile (0.48-km) segment was chosen along with 1- and 2-year periods for accumulating and comparing accident data. An optimal method for identifying hazardous locations and sections was determined to be one which (1) maximizes benefits from improvements, (2) identifies locations with critically high accident rates, and (3) identifies potential hazards. A sample of 170 locations was used to compare several location-identification methods. The procedure …

Acoustic Emission Testing Of Shielded Metal-Arc Welds Using Astm A 36 Steel, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

Manual, shielded metal-arc welds on ASTM A 36 structural steel were monitored with acoustic emission equipment. The listening device detected operator inconsistencies and improper electrode deposition during the welding operation. On completion of the weld, acoustic emission monitoring detected slag inclusions, cracking, and martensite formation.

Shear Strength Of Cohesive Soils And Friction Sleeve Resistance, Vincent P. Drnevich, C. Thomas Gorman, Tommy C. Hopkins

Kentucky Transportation Center Research Report

Cone penetrations tests were performed on the silty clays of Kentucky, U.S.A., using a boring rig to push the Dutch, friction sleeve, cone penetrometer. Thin-walled tube samples were taken from nearby boreholes. For the first four sites, unconfined compression tests and unconsolidated-undrained triaxial test were performed on the samples. For the last four sites, consolidated-undrained triaxial tests were performed on the samples. A procedure for estimating in situ shear strength from triaxial test stress paths was developed.

Small rock fragments in these residual soils caused erratic cone resistance at many locations. As a result, the friction sleeve resistance provided the …

Short Range Development Plan 1974-1979, Jacksonville Area Planning Board

Arthur N. Sollee, Sr. Textual Materials

A five year Short Range Development Plan was prepared simultaneously with and as the basis for Jacksonville's Capital Outlay Program (COP). Background studies for the Plan included land use and structural surveys, population and dwelling unit projections, zoning change and site plan approval trends, land use assignment criteria, and environmental and capital improvement needs criteria. A land use plan adequate to serve projected growth was prepared. The Transportation Plan reflects the latest transportation studies for the City including proposals for a fixed guide way, express bus and local bus systems. All additional community facility and utility needs for projected 1980 …

Synthetically-Generated Holographic Memory System Utilizing Partially Coherent Light, William A. Barrett

Dissertations

This dissertation proposes a novel form of optical ROM for the digital computer. This memory makes use of holographic techniques because of the advantages offered by holographic memories over conventional optical ones, especially with regard to dust and scratch sensitivity.

These advantages have long been recognized by workers in the field, indeed several holographic optical memories have already been proposed.

A survey of the state of the art of digital computer memories is offered in the introductory part of the thesis. Particular emphasis is placed on optical memories. A brief review of basic holographic theory is also included for reference. …

A Nonlinear Viscoelastic Model, Yon-Li Shangkuan

Dissertations

A nonlinear viscoelastic model has been developed to describe the non-Newtonian viscosities and the primary normal stress differences of high polymers at steady-state shearing flow.

It has been demonstrated that the Huang-Shangkuan model gives the best representation of the experimental data for a wide range of shear rates. In the high shear rate region the Huang-Shangkuan model is distinguished among other models by its capability to predict the nonNewtonian viscosities and the primary normal stress differences Which the other models fail to predict.

Continuum mechanics, Lodge's network theory and Rouse's theory provide specific information in developing our model. The theoretical …

Optimal Planning Of Fixed Route Bus Transit Systems : A Systems Approach, Young Lee

Dissertations

A new bus transit planning tool is developed for application in determining operating policies of a fixed-route bus transit system. The objective of the study is to model a bus transit system which functions under time-varying passenger demands and service characteristics.

The two phase transit model developed in this research is intended for use as a mass transit planning tool, to solve transit problems confronting the mass transit planner. The model is used to compute cost differentials in transit system options. These alternatives of expanding, abandoning or modifying service depend upon the service frequency, fleet size and other system attributes …

Effect Of Gas Temperature Gradients And Radiant Heat Transmission On Kinetic Model Behavior, Richard W. J. Robertson

Dissertations

Satisfactory methods to predict radiant heat transmission in enclosures containing a radiating gas at uniform temperature are available. These methods have been traditionally used in solutions of kinetic models.

Kinetic models are strongly temperature dependent with a difference of 10°K able to double the reaction rate. In the present investigation, calculation techniques which make allowance for the non-uniformity of gas temperatures in an enclosure are applied to the kinetic models. The furnace problem considers only the radiation section with the assumption that detailed knowledge of combustion and fluid flow pattern within the enclosure is available.

If the gas space in …

Design Of Multipass Fractionating Trays, Paul W. Becker

Theses

Multipass fractionating trays are vapor-liquid contacting devices with high liquid handling capabilities which can be economically used in large fractionating towers. However, process design engineers in the chemical and petroleum industries seem to have an aversion to specifying multipass trays for their tower designs. This thesis presents the case for using multipass trays as well as methods for their design.

Because multipass trays are not symmetrical, as one and two pass trays are, the liquid and vapor need not split equally between the three or four passes. Equations are developed which enable the vapor and liquid flowrate for each pass …

Solvent Recovery From A Complex Process Solvent Stream, John Budavari

Theses

This work deals with the recovery of solvents from a complex process waste stream containing methylene chloride chloroform, n-propyl alcohol, isopropyl alcohol, heptane and butyl acetate. In addition to the above-mentioned solvents, the mixture is saturated with water (ca. 1%), hydrochloric acid, and contains organic and inorganic process impurities. The objective was to develop the simplest economical recovery process utilizing vapor-liquid equilibrium data, distillation and extraction procedures. Considerable effort was expended to develop precise and reliable assay methods. A process which met the necessary requirements of maximum solvent recovery with minimum waste disposal, was developed.

An Experimental Study Of The Separation Of Multicomponent Mixtures Via Thermal Parametric Pumping, Wayne Weywen Lin

Theses

A thermal continuous parametric pump for separating multi-component mixtures was experimentally investigated using the model system toluene-aniline-n-heptane on silica gel adsorbent. A simple method for predicting separations is presented and is found to be in good agreement with the experimental results. The method, based on an equilibrium theory, is under the assumption that a multicomponent mixture contains a series of pseudo-binary systems, each system consisting of one of the solutes as one component and the common inert solvent as the other component.

Densities Of Polar And Non-Polar Compounds And Their Mixtures, Peter Norman Notwick

Theses

Two principal studies were conducted as part of this thesis: evaluation of existing correlations for predicting densities of polar and non-polar liquids and their mixtures and experimentally measuring the densities of certain liquid systems.

Utilizing a modification of the simple picnometer experimental method, data were obtained for both pure compounds and liquid mixtures. Comparison of the pure compound data with available literature sources established the reliability of the technique.

The results of the correlation comparison indicate that the Riedel equation, is the most generally reliable for predicting the densities of pure "normal" compounds. Lydersen, et al., prepared tables for the …

Design For A Developing Consortium, Henry A. Mauermeyer

Theses

The number of consortia in American higher education expanded rapidly from only ten in 1960 to eighty in 1973. Many do not have an organized method of developing interinstitutional cooperation, structuring their internal management, or preparing to meet future expansion.

The design of an organizational process appropriate to consortia in general has been developed in this thesis. The design is based on an analysis of various materials: (1) literature on the consortium movement; (2) data gathered from a nationwide survey conducted by the author; (3) visits with directors of consortia and experts in the consortium field; (4) actual working experience …

The Design And Implementation Of A Time-Shared Computer Based Construction Cost Estimating System For An Electric Utility, Thomas Arnold Westphal

Theses

The work of the distribution department of an elec tric utility involves a great deal of medium to heavy construction. This work is vital to serve the energy needs of the public. An electric utility constantly builds, reinforces, and repairs electric distribution facilities. The material and labor used to accomplish this construction is expensive. Money in sufficient amounts is seldom, if ever, available to finance all proposed construction projects. Therefore, the cost of proposed projects must be estimated in advance, so that management may decide on an economic basis which projects will be authorized.

The need for accurate construction cost …