Engineering Commons^™

Direct Evaporative Cooling For Sustainability And Environmental Conservation, Iman El-Mahallawi, Hesham Safwat, Mahmoud Elsayed, Mahmoud Alghrieb

Mechanical Engineering

This work presents the results of experimental work on cellulose cooling pads with honeycomb structure to study their evaporative cooling effect which is one of the partial solutions for achieving the SDG goals 2030. The paper outlines various types of evaporative cooling materials, highlighting their distinctions and potential applications. Furthermore, it offers a comparative analysis of the cooling effects between wide hole and narrow hole cellulose cooling pads, both individually and in combination. The experimental setup results are thoroughly examined to provide insights into the performance of the cooling pads. Results showed up that direct evaporative cooling have a significant …

Investigating The Impact Of Inverter-Based Resources On Power Grid Dynamics, Ratik Mittal

USF Tampa Graduate Theses and Dissertations

This dissertation explores the stability challenges posed by integrating Inverter-Based Resources (IBR) into power grids, particularly focusing on two major scenarios: IBRs connected to weak grid interconnections and their performance in series-compensated networks. With the increasing dependency on renewable energy sources, ensuring the stability of these grids is crucial. A multilayered investigative approach is employed, utilizing Electromagnetic Transient Simulations that model grid systems interfaced with IBRs. These simulations are pivotal as they emulate real-world stability issues and provide a foundational understanding of grid interactions. In this dissertation two major types of IBR control are modeled and analyzed: Grid Following Control …

Enhancing Urban Parking Efficiency Through Machine Learning Model Integration, Sai Sneha Channamallu, Sharareh Kermanshachi, Jay Michael Rosenberger, Apurva Pamidimukkala

Open Initiatives Grant Funded Publications-Archive

An increase in vehicular traffic and a scarcity of parking spaces are creating significant challenges for urban parking management. This study aims to tackle these issues that escalate congestion and pollution and decrease urban productivity, by utilizing machine learning models to accurately predict parking space availability and categorize occupancy levels. It employs a dataset from a college campus garage collected from January 2022 to June 2023 and analyzes the performance of random forest, decision tree, linear regression, and support vector models by comparing them, using multiple evaluation metrics. The results revealed that the random forest model was the most reliable, …

Refining Transversal Skills Through Engineering Design Projects: A Case For Authentic Assessment, Gerald Gallagher, Kevin Delaney, David Salter, Mingzhu Chen

Conference Papers

Transversal skills were typically not the focus of traditional engineering education, where strong technical prowess by students tended to be emphasised in undergraduate and postgraduate study. However, the importance of developing these skills, having application across multiple career trajectories, is becoming a key area of development in engineering education. An engineering design module presented in this work has been refined to act as a vehicle to help students develop and practice these transversal skills while simultaneously reinforcing their abilities in mechanical design. This paper describes how the module has been structured and operationalised, through approximations of practice and authentic assessment, …

Spectral Behavior Of Fiber Bragg Gratings During Embedding In 3d-Printed Metal Tensile Coupons And Cyclic Loading, Farid Ahmed, Md Shahriar Forhad, Mahmudul Hasan Porag

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing (AM) enables the spatially configurable 3D integration of sensors in metal components to realize smart materials and structures. Outstanding sensing capabilities and size compatibility have made fiber optic sensors excellent candidates for integration in AM components. In this study, fiber Bragg grating (FBG) sensors were embedded in Inconel 718 tensile coupons printed using laser powder bed fusion AM. On-axis (fiber runs through the coupon’s center of axis) and off-axis (fiber is at 5° and 10° to the coupon’s center of axis) sensors were buried in epoxy resin inside narrow channels that run through the coupons. FBGs’ spectral evolutions …

New Generation Graphenes In Cement-Based Materials: Production, Property Enhancement, And Life Cycle Analysis, Sahil Surehali, Sayee Srikarah Volaity, Aswathy Simon, Ranjith Divigalpitiya, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Several studies have explored the use of graphene to improve the properties of cement-based materials. However, most commercially available graphenes are expensive, not amenable to mass production, and have high embodied energy and emissions, making their use in concrete less attractive, despite the beneficial mechanical property attributes. This paper discusses the use of two novel graphene types, fractal graphene (FG) and reactive graphene (RG), obtained through a cost-effective and scalable detonation synthesis, in cement-based materials. FG and RG are sheets containing 6-10 layers, with lateral dimensions of 20-50 nm and a z-axis thickness of RG, when added at very small …

Design And Characterization Of 3d-Printed Hydrogel Lattices With Consistent Structural And Mechanical Anisotropy, Daniel Yoon

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis explores the use of 3D printing to fabricate soft hydrogel lattice structures with consistent properties, including varying levels of mechanical anisotropy. Magnetic resonance elastography (MRE) is a non-invasive imaging tool to estimate and characterize the mechanical properties of tissue. MRE “phantoms” (physical surrogate models) have been used to assess how well MRE can measure and estimate mechanical properties. While gel phantoms generally simulate brain tissue, almost all have been isotropic. Prior studies have shown that white matter brain tissue is structurally and mechanically anisotropic. To validate anisotropic MRE, phantoms with controllable, reproducible anisotropic material properties are needed. This …

Editorial: Mitral Valve Disease: Mechanisms To Therapies, Maria Carmo Nunes, Hoda Hatoum, Alison M. Pouch, Muralidhar Padala

Michigan Tech Publications

No abstract provided.

A Country-Level Primary-Final-Useful (Cl-Pfu) Energy And Exergy Database: Overview Of Its Construction And 1971–2020 World-Level Efficiency Results, Paul E. Brockway, Matthew Kuperus Heun, Zeke Marshall, Emmanuel Aramendia, Paul Steenwyk, Thomas Relph, Michelle Widjanarko, Jeonghoo (James) Kim, Anjana Sainju, Julian Irtube

University Faculty Publications and Creative Works

Societal exergy analysis examines the flows of energy and exergy through societies, from primary (e.g. oil) to final (e.g. gasoline) to useful (e.g. propulsion) energy stages. By extending the study of energy to the useful stage, new insights into the under-represented role of energy in economic growth have been made. However, currently (a) country coverage is patchy and incomplete, (b) available data are based on varying methods and assumptions including efficiencies based on economic rather than engineering data, and (c) datasets are constructed using piecemeal computational approaches. To address these gaps, we construct a country-level primary-final-useful (CL-PFU) energy and exergy …

Detection Of Wintertime Green Vegetated Cover Using Object-Based Classification With Open-Source Remote Sensing And Geospatial Technologies, Jae Sung Kim, Sara P. Syswerda, Sigrid D. P. Smith

Michigan Tech Publications

It is important to detect wintertime green vegetated cover (WGVC), since it includes cover crop information, which is one of the most important agricultural best management practices used today. Related to this, cover crop area, which is part of WGVC, has been estimated using survey methods traditionally, but remote sensing can be used as a more time- and cost-effective assessment. Previously developed pixel-based methods to assess cover crops using remote sensing can have a salt-and-pepper effect, which lowers classification accuracy. Therefore, object-based classification was applied to estimate the spatial distribution of WGVC across the entire state of Delaware. To reduce …

Naturalistic Driving Action Recognition, Andy Xiao, Antonio Fontan

Computer Science and Engineering Senior Theses

Driving is one of the most tasks people do day to day to get to places more efficiently, but with many people using the road every day, distracted driving can be a big problem. Grothlaw firm states that in the recent years, at least 9 out of 3287 deaths related to auto accidents per day are caused by distracted driving [1]. Distracted driving refers to things that drivers do that are not related to driving [2] This can include texting, eating, talking to passengers, tuning the radios, etc... that can get the driver’s attention away from the road [2]. Many …

Ar Storybook, Priya Jain, Jessica Torres, Melody Trinh

Computer Science and Engineering Senior Theses

Parents often use technology as a digital pacifier or source of entertainment for their children. While excessive screen time for children can be harmful, a digital future seems inevitable. As technology becomes more prominent in everyday life, children should utilize their early years to engage with technology in a way that develops their growing minds. AR Storybook is an interactive storybook that strives to provide children with an active learning experience. The story teaches children computational thinking skills through augmented reality activities embedded into the plot. The activities ask the user to help a character complete a task by using …

Capstone Review: Filament Unit Multiplexing Engine, Gal Cohen

University Honors Theses

The Filament Unit Multiplexing Engine (FUME) is a Mechanical Engineering capstone project sponsored by Portland State University's Electronic Prototyping Lab (EPL). The project addresses the need for an automated system to manage 3D printing operations. The current manual process of selecting and routing a spool of filament to one of the available 3D printers is labor-intensive and limits the efficiency of the lab's 3D printing farm. FUME aims to create a custom solution tailored for a multi-user, multi-spool, and multi-printer environment. The designed system includes key components: a spool holder, an engine, a track and shuttle system, and a funnel. …

Spin And Charge Transport In Metallic Ferrimagnets And Disordered Magnetic Oxides, Leopoldo A. Hernandez

Electronic Theses and Dissertations

Recent efforts have been exploring the use of thin film synthetic ferrimagnets and disordered magnetic oxides for applications in spintronic devices. Due to the antiferromagnetic exchange interaction, ferrimagnetic materials offer the ultrafast dynamics of the antiferromagnetic exchange, with a net magnetization that can be influenced externally. With two, or more, competing ferromagnet sublattices, interesting properties arise that depend on the final magnetic landscape after growth of the material and it’s inherent magnetic anisotropy energies. Properties such as magnetic compensation temperatures, and perpendicular magnetic anisotropy are attractive for applications in spintronic memory and logic devices, some already being implemented in MRAM …

Effect Of Oxidation Of Graphene On Agglomeration And The Mechanical Properties Of Thermosetting Resins, Matthew A. Reil

Electronic Theses and Dissertations

Thermosetting resins are used extensively worldwide in applications ranging from adhesives to structural components. However, these resins generally fail in a brittle fracture mode which is undesirable in most situations. Graphene (G) and its derivatives have been considered as additives to epoxy for material property enhancement and varied results have been reported in the literature. In this work, the effects of the oxidation of G to graphene oxide (GO) on polymer interactions and plate agglomeration were studied by classical molecular dynamics (MD). Results from those simulations concluded that agglomerates were likely present in all G-based nanocomposites. The effect of these …

Incremental Quantities Based Permissive Overreaching Transfer Trip Scheme For Protecting Inverter-Based Renewable Resources, Osama Zangoti

Electronic Theses and Dissertations

The power generation landscape evolves, with the increase of inverter-based resources (IBRs) such as solar photovoltaics and wind turbines, providing sustainable and clean energy sources. The shift towards IBRs mitigates climate change, creating considerable challenges to traditional power system protection due to their low fault current. Conventional protection schemes are designed around the internal dynamic of synchronous generators where they can supply an elevated fault current. This thesis explores a protection scheme designed to enhance the security of IBRs. The incremental characteristics of voltage and current coupled with the Permissive Overreaching Transfer Trip scheme (POTT) provide a remarkable ability to …

Aging-Related Changes In The Mechanical Properties Of Single Cells, Amarnath Singam, Chandrabali Bhattacharya, Seungman Park

Mechanical Engineering Faculty Research

Mechanical properties, along with biochemical and molecular properties, play crucial roles in governing cellular function and homeostasis. Cellular mechanics are influenced by various factors, including physiological and pathological states, making them potential biomarkers for diseases and aging. While several methods such as AFM, particle-tracking microrheology, optical tweezers/stretching, magnetic tweezers/twisting cytometry, microfluidics, and micropipette aspiration have been widely utilized to measure the mechanical properties of single cells, our understanding of how aging affects these properties remains limited. To fill this knowledge gap, we provide a brief overview of the commonly used methods to measure single-cell mechanical properties. We then delve into …

Bridging Design And Perception: Novel Tools And Technologies For Creating Effective Human-Robot Interactions, Benjamin Dossett

Electronic Theses and Dissertations

This thesis explores human perception of robots through the use of novel tools and technologies. First, the impact of Augmented Reality (AR) data presentation on human perception of robots is investigated. A study conducted with the AR human-robot teaming system found that robot performance significantly influenced participants’ perceptions, overshadowing the impact of matching or mismatching robot confidence feedback. Second, the DU Want to Build-A-Bot platform is presented, which enables participatory robot design and opens the door for novel research of how robot design affects human perception. The Build-A-Bot platform enables the collection of diverse robot designs, facilitating machine learning analysis …

Patient-Specific Musculoskeletal Modeling Of Total Shoulder Arthroplasty, Brendan M. Curran

Electronic Theses and Dissertations

Total shoulder arthroplasty (TSA) is often considered a surgery of last resort for patients with debilitating pathologies of the glenohumeral joint such as osteoarthritis, humeral head fracture, and advancing rotator cuff tears. TSA replaces the articulation between the humeral head and the glenoid fossa, with the goals of relieving pain and restoring function. Two types of total shoulder implants are available: Anatomic Total Shoulder Arthroplasty (aTSA) and Reverse Total Shoulder Arthroplasty (rTSA). TSA survivorship is lower than that of the survivorship seen in total knee and hip replacements [1]. Shoulder muscle moment arms and lines of action have been measured …

Statistical Modeling Of Knee Morphology And Material Properties Considering Diverse Populations, Gabrielle Jeannine Kindy

Electronic Theses and Dissertations

Total Knee Arthroplasty (TKA) is a widely performed surgical procedure aimed at alleviating pain and restoring function in patients with severe knee osteoarthritis. Despite its general success, disparities in postoperative outcomes have been observed across different racial and ethnic groups, with minority populations often experiencing less favorable results. One potential avenue for improving the generalizability of orthopaedic implants is using Statistical Shape and Intensity Models (SSIMs), which can be used to incorporate patient variability directly into the orthopaedic medical device development workflow through population-based finite element analysis.

This work aimed to construct an SSIM from a diverse subject set, incorporating …

Design, Prototyping, And Characterization Of A Micro-Force Sensor Intended For Tissue Assessment In Confined Spaces, Shashank S. Kumat, Panos S. Shiakolas

Open Initiatives Grant Funded Publications-Archive

The quantitative characterization of soft tissue viscoelastic properties can aid in disease prognosis and diagnosis. Existing technologies present challenges to measuring localized in vivo tissue relaxation data while meeting load and geometric constraints. This research presents the design, prototype, and characterization of a micro-force sensor that could enable better access to confined spaces of the human body. The novel design of the uniaxial micro-force sensor has an external diameter of less than or equal to 3.5 mm and 1 N load capacity for transurethral palpation of the bladder interior wall. The conceptual design of the micro-force sensor and a finite …

Atom Probe Tomography Of Segregation At Grain Boundaries And Gas Bubbles In Neutron Irradiated U-10 Wt% Mo Fuel, Maalavan Arivu, Andrew Hoffman, Mukesh Bachhav, Assel Aitkaliyeva, Yaqiao Wu, Brandon Miller, Dennis Keiser, Jian Gan, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

During Neutron Irradiation to Fission Densities > 5.2 X 1021 Fiss/cm3, Xe Agglomerates Forming Gas Bubbles of Varying Size within the U-Mo Fuel Matrix. Herein, Segregation of Fission Products to Xe Bubbles and Grain Boundaries (GB) Were Studied using Atom Probe Tomography (APT). Segregation Behavior Was Found to Vary among GBs, Small Bubbles (<10 >Nm), and Larger Bubbles (>10 Nm). Solid Fission Products Were Enriched at GBs and Larger Bubbles, But Not at Small Bubbles. a Denuded Zone Was Identified Adjacent to a > 10 Nm Xe Gas Bubble and a GB.

Academic Success In First-Year Engineering Students At Private Higher Education Institutions In Egypt: Key Factors, Wassim Alexan

Theses and Dissertations

This research aimed to identify the key factors contributing to the success of first-year engineering students at private higher education institutions (HEIs) in Egypt. It specifically examined how various independent variables influence the success of these students, measured as the dependent variable. By analyzing these relationships, the study seeks to pinpoint key success factors (KSFs) for first year engineering students in this specific educational context. The research work employed a mixed methods approach, utilizing both quantitative and qualitative research methods. The quantitative analysis involved collecting data through a survey administered to a sample of first year engineering students at private …

Fast And Accurate Automatic Design Of Spiral Inductors From High-Level Specification, Heba Ismail

Theses and Dissertations

Integrated on-chip planar spiral inductors are widely employed in communication circuit blocks and other various electronic devices, thus becoming an essential passive component of RF integrated circuits (RFICs). A common vital spiral inductor design problem is determining the optimum layout parameters of spiral inductors that yield the desired inductance value and achieve highest quality factor at the intended operating frequency. Various approaches tackle this difficulty, but the most prevalent approaches for designing inductors are using an electromagnetic simulator or a library of pre-designed inductors. The latter approach requires an extensive amount of time and computational resources, whereas the former restricts …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Activity Descriptors As Tools For Designing Highly Efficient Electrocatalysts For Water Splitting, Aya Gomaa

Theses and Dissertations

There is an uprising urge to design efficient, active, and durable catalysts to achieve sustainable hydrogen production. The unambiguity of which material should be used pushed the scientific community to devote enormous efforts in exploring different elements with different ratios on trial and error bases. However, the bridge between the theoretical calculation and the experiments introduced a new realm of designing efficient catalysts by introducing the concept of activity descriptors. In the first part of the thesis, the ability to convert waste stainless steel (SS) 316L meshes into highly efficient and durable oxygen evolution reaction (OER) catalysts is demonstrated. The …

Navigating The Rules: Integrating Td3 And Sensor Fusion For Traffic-Aware Autonomous Vehicle Path Planning, Mahmoud Ayman Mohamed Elsayed

Theses and Dissertations

This work presents a novel algorithm for local path planning for autonomous vehicles (AVs) which prioritizes both safety and adherence to traffic regulations, addressing critical functions for AV navigation, such as navigating complex environments, avoiding obstacles, and ensuring passenger and road users safety. The algorithm integrates the Twin Delayed Deep Deterministic Policy Gradient (TD3) with sensor fusion based on Nvidia Convolutional Neural Network (NCNN). The study utilizes the CARLA simulator, and real-world datasets, including KITTI and WAYMO, to train and evaluate the proposed algorithm. The proposed algorithm leverages the complementary strengths of Imitation Learning (IL) and Deep Reinforcement Learning (DRL) …

Virtual Museum Tours Of The De Saisset Museum, Justin Enciso-Anaya, Karthik Tamil, Quoc Truong

Computer Science and Engineering Senior Theses

Our project transforms the California Stories exhibit at the de Saisset Museum into an immersive virtual tour, integrating Matterport technology and Human-Computer-Interaction (HCI) principles. Matterport’s high resolution 360 degree camera allows us to capture a physical space in high definition into a 3D virtual space while Matterport’s software helps to facilitate the creation and editing for our physical space in a virtual environment. HCI principles focus on how systems should work when direct interaction with users is a key component. We apply the principles of HCI to create a virtual museum tour that offers visitors a culturally enriching, interactive experience, …

Monterecycle: An Application For Streamlining Tracking Of Recyclables In Uruguay, Aayooshi Dharmadhakari, Danny Walsh, Eason Ke, Kamya Krishnan

Computer Science and Engineering Senior Theses

Recycling is a crucial process that has a positive impact on nature, cleans the environment, and saves time and money. Classifying recyclables by material and recycling these items accordingly helps make our world more environmentally-friendly and a better place to live.

In the recycling system in Montevideo, Uruguay, third-party contractors hired by San Vicente transport clients’ recyclables to a central recycling center or to a person that does recycling. In the past, San Vicente has transported recyclables though horse and buggy transportation. However, there has been a push from the city to replace the horses with motorcycles to reduce animal …

Differentiating Dynamic System Outcomes In Cam Photosynthesis Through Sonification, Duncan Turley

Civil and Environmental Engineering Undergraduate Honors Theses

Sonification is a powerful tool that is harnessed by modern engineers to represent information through audio, and is beginning to be used to interpret more complex data sets. Sonification can be used to facilitate the listeners' ability to grasp microscopic or complex changes in the state of a system. This study uses the assigning of sound patterns to model outputs that indicate chaotic or non-chaotic systems in Crassulacean acid metabolism photosynthesis. Using sound allows the interpretation of chaotic data without the more time intensive processes typically used, such as of Fast Fourier Transformations. Based on past research, it is known …