Engineering Commons^™

The Effects Of Carbon Nanotubes On Cells In A Synthetic Oxygen Carrier Enriched Alginate Scaffold, Joshua Paul Tate

LSU Master's Theses

Abstract Huge progress has been made in the development of three dimensionally printed tissue structures. With the use of cells, three dimensional printers, and CAD drawing software, donor identical structures can be fabricated. However, cell scaffolds currently lack significant mechanical integrity which can result in reduced cellular survival, attachment, and nutrient delivery. For this reason, multiple strategies have been developed to increase and improve mechanical stability within engineered constructs without having to sacrifice cell viability. The hypothesis of this paper was that incorporating Perfluorotributylamine (PFTBA), a greenhouse gas, with single walled carbon nanotubes (SWCNT), a allotrope of carbon with a …

Evaluation And Validation Of A Model To Predict The Effect Of Asphalt Mixtures And Vehicle Speed On Fuel Consumption Excess, Nirmal Dhakal

LSU Master's Theses

The primary objective of this study is to evaluate the effects of asphalt concrete (AC) properties and vehicle speed on fuel consumption excess using a Three-Dimensional (3D) Finite Element (FE) approach. Secondarily, the effect of pavement design characteristics on energy dissipation was studied. Finite element modeling was used to simulate three flexible pavements typically used for low traffic volume, medium traffic volume, and high traffic volume. The effect of asphalt concrete mixes with different binders and varying percentages of Reclaimed Asphalt Pavement (RAP) on fuel consumption excess was studied. The FE models were validated based on field stress and strain …

Fabrication And Characterization Of Thiol-Acrylate Based Polymer For Bone Tissue Engineering Application, Anoosha Forghani

LSU Master's Theses

Thiol-acrylate materials have been demonstrated to have therapeutic potential as biocompatible scaffolds for bone tissue regeneration due to their osteoconductivity, biodegradability, and well-suited mechanical properties. This study connects the mechanical properties and stability of thiol-acrylate polymer with cell adhesion and proliferation of human adipose derived stromal cells. The polymer presented in this study, trimethylolpropane ethoxylate triacrylate-co-trimethylolpropane tris (3-mercaptopropionate) (TMPeTA-co-TMPTMP), was synthesized by an amine-catalyzed Michael addition reaction. Physical, mechanical, and chemical characterizations were performed on the polymeric scaffold, followed by preliminary in vitro cytocompatibility tests. Live/dead staining assays showed significant differences in cell adhesion for TMPeTA (692 and 912 MW). …

Rapid Cooling Of Eastern Oysters (Crassostrea Virginica) Using An On-Board Icing Unit To Slow The Growth Of Vibrio Vulnificus And Vibrio Parahaemolyticus, Melody Amber Thomas

LSU Master's Theses

Oyster harvesting is a major industry along the Eastern and Gulf coasts of the United States. Eastern oysters (Crassostrea virginica) spawn when the waters start to warm between May and October in the Gulf of Mexico. The warmer temperature creates a problem with an increase of bacteria. The two major bacteria affecting the oyster industry are Vibrio vulnificus and Vibrio parahaemolyticus. These bacteria are the leading causes of seafood-borne illnesses in the United States. This increase of V. vulnificus and V. parahaemolyticus has led to stricter time/temperature requirements for harvesting oysters. The regulations are not plausible for smaller vessels too …

The Design, Fabrication, And Validation Of A Film Cooled Rotating Turbine Cascade With An Actively Cooled Shroud In A Closed Loop Wind Tunnel, Christopher Michael Drewes

LSU Master's Theses

To test shroud and blade cooling effectiveness, a closed loop, heated wind tunnel housing a film cooled rotating turbine cascade with prescribed blade and vane geometry surrounded by a fully cooled shroud with a leading edge gap were designed and assembled on Louisiana State University’s campus. Heat transfer coefficients and film cooling effectiveness results were computed using a 1-D semi-infinite solid conduction analysis of material temperatures obtained with liquid crystal thermography. Proper analysis required a step change in air temperature; so a bypass loop provided mainstream air heating while maintaining the shroud and blades at ambient temperature. Also, analysis required …

Hybrid Ant Colony Optimization For Fuzzy Unrelated Parallel Machine Scheduling Problems, Po An Su

LSU Master's Theses

This study extends the best hybrid ant colony optimization variant developed by Liao et al. (2014) for crisp unrelated parallel machine scheduling problems to solve fuzzy unrelated parallel machine scheduling problems in consideration of trapezoidal fuzzy processing times, trapezoidal fuzzy sequencing dependent setup times and trapezoidal fuzzy release times. The objective is to find the best schedule taking minimum fuzzy makespan in completing all jobs. In this study, fuzzy arithmetic is used to determine fuzzy completion times of jobs and defuzzification function is used to convert fuzzy numbers back to crisp numbers for ranking. Eight fuzzy ranking methods are tested …

An Architecture For Configuring An Efficient Scan Path For A Subset Of Elements, Arash Ashrafi

LSU Master's Theses

LaTeX4Web 1.4 OUTPUT Field Programmable Gate Arrays (FPGAs) have many modern applications. A feature of FPGAs is that they can be reconfigured to suit the computation. One such form of reconfiguration, called partial reconfiguration (PR), allows part of the chip to be altered. The smallest part that can be reconfigured is called a frame. To reconfigure a frame, a fixed number of configuration bits are input (typically from outside) to the frame. Thus PR involves (a) selecting a subset C Í S of k out of n frames to configure and (b) inputting the configuration bits for these k frames. …

Biomass Catalytic Upconversion With A Metallic Catalyst Bed Under Radio Frequency Induction Heating, Mohammad Abu-Laban

LSU Master's Theses

This study investigated the thermal performances of platinum particles when coupled on a steel support, under the application of a radio frequency (RF) field. Platinum nanoparticles were reduced on the surfaces of type-316 stainless steel balls, based on published methods of Pt reduction from chloroplatinic acid. Alternatively, 1wt. % Pt/Al2O3 commercial catalyst pellets were mixed with stainless steel balls and investigated for hydro-deoxygenation of pyrolysis oil from pine sawdust biomass. The catalysts were placed inside an electric insulator tube suspended within a looping copper coil connected to the induction heater, and heated at different power levels. An infrared camera was …

Modeling Churn And Annular Flow Regimes In Vertical And Near-Vertical Pipes With Small And Large Diameters, Erika Viana Pagan

LSU Master's Theses

This thesis presents an improved model for gas-liquid two-phase flow in churn and annular flow regimes for small- and large-diameter in vertical and near-vertical pipes. This new model assumes that a net liquid film moves upward along the pipe wall and gas phase moves upward, occupying the majority of the central part of the pipes, and forming a gas core, in both flow regimes. The model is validated using field and laboratory experimental data from several different studies from the literature, in terms of pressure along the wellbore or bottomhole pressure for field conditions (for high-pressure flows in long pipes, …

The Supercritical Pyrolysis Of 1-Octene, Elizabeth Anne Hurst

LSU Master's Theses

In the pre-combustion environment, fuels for future high-speed aircrafts are predicted to take on increasing heat loads in their role as the primary coolant in order to remove excess heat from engine subsystems. While acting in this role, these fuels are expected to experience temperatures and pressures up to 700 °C and 130 atm, conditions which are supercritical for jet fuels and most hydrocarbons. Such extreme conditions can cause fuel decomposition and subsequent pyrolytic reactions, which can lead to the formation of polycyclic aromatic hydrocarbons (PAH). PAH are precursors to solids deposits that clog fuel-delivery lines, causing reduced engine performance …

Quantitative Analysis Of Marine Transportation Systems Resiliency, Nafiseh Farhadi

LSU Master's Theses

The United States Marine Transportation System (MTS) makes large contributions to the nation’s economy, security, safety, and quality of life. Strategic investment, planning, administrative and operational decisions by government at all levels are necessary to maintain the marine transportation system performance at all times, which in turn requires a technical approach and professional leadership based on research. This study describes the approach and results of an ongoing research effort to assess the resiliency of port operations following major disasters and other disruptive events. The work presented in this research uses a set of archival data from the United States Coast …

A Biomimetic, Energy-Harvesting, Obstacle-Avoiding, Path-Planning Algorithm For Uavs, Snorri Gudmundsson

Doctoral Dissertations and Master's Theses

This dissertation presents two new approaches to energy harvesting for Unmanned Aerial Vehicles (UAV). One method is based on the Potential Flow Method (PFM); the other method seeds a wind-field map based on updraft peak analysis and then applies a variant of the Bellman-Ford algorithm to find the minimum-cost path. Both methods are enhanced by taking into account the performance characteristics of the aircraft using advanced performance theory. The combined approach yields five possible trajectories from which the one with the minimum energy cost is selected. The dissertation concludes by using the developed theory and modeling tools to simulate the …

Microfluidic Device For Motility And Osmolality Analysis Of Zebrafish Sperm, Jacob Ethan Beckham

LSU Master's Theses

An increasing number of laboratories are evaluating sample quality via motility analysis by means of computer-assisted sperm analysis (CASA) after sperm activation by manual dilution and mixing. Even with the use of CASA, due to user variation, there is a lack of control over the activation process, resulting in inconsistent motility analysis. Low sample volume (~1-2µL), and a short motility duration (burst motility of less than 15s) add to the complexity of these difficulties. The objectives of this study were to develop a microfluidic device with the capabilities to (1) standardize the method of activation for zebrafish sperm so that …

Cfd Prediction And Simulation Of A Pumpjet Propulsor, Lin Lu, Guang Pan, Prasanta K. Sahoo

Ocean Engineering and Marine Sciences Faculty Publications

In this study an attempt has been made to study the hydrodynamic performance of pumpjet propulsor. Numerical investigation based on the Reynolds Averaged NaviereStokes (RANS) computational fluid dynamics (CFD) method has been carried out. The structured grid and SST keu turbulence model have been applied. The numerical simulations of open water performance of marine propeller E779A are carried out with different advance ratios to verify the numerical simulation method. Results show that the thrust and the torque are in good agreements with experimental data. The grid independent inspection is applied to verify accuracy of numerical simulation grid. The numerical predictions …

Development Of A Pressure Swing Adsorption (Psa) Cycle For Co2 Capture From Flue Gas Using A 4-Bed Psa Apparatus, Joshua White

Theses and Dissertations

Pressure swing adsorption is an effective way to capture CO2 from flue gases in energy plants. Pressure swing adsorption utilizes an adsorbent’s selectivity to a specific compound to remove it from a feed stream. Zeolite 13X was used for this research to obtain a high purity and recovery of CO2 at a higher feed flow than previous research. The first part of the work was to use in house FORTRAN based Dynamic Adsorption Process Simulator (DAPS) that uses the finite difference method and the time adaptive Differential- Algebraic Equation (DAE) solver called DASPK to narrow down appropriate experiment criteria for …

Mechanical Characterization Of Sicf-Sicm Nuclear Fuel Cladding By A Novel Hydraulic Internal Pressurization Method, Kirill Shapovalov

Theses and Dissertations

Ceramic Matrix Composites (CMC) have been actively researched for applications requiring high temperature strength and damage tolerance. Examples are turbine engine hot section components, leading edges for hypersonic vehicles, nuclear fusion reactor first wall and blanket, and recently nuclear fuel claddings. Predictable material damage behavior is desirable for these applications so early damage accumulation can be detected before a catastrophic failure occurs. Many ceramic materials can withstand high temperature environments, but due to inherent brittleness of ceramics the high damage tolerance and the predictable damage behavior are difficult to achieve. Ceramic fiber reinforced ceramic composites (CFCC) have demonstrated the above …

Anisotropic Electrical Response Of Carbon Fiber Reinforced Composite Materials, Mohammad Faisal Haider

Theses and Dissertations

Composites materials are often subjected to multi-physical conditions in different applications where, in addition to mechanical loads, they also need to sustain other types of loads such as electrical currents. The multi-physical behavior of composites needs to be understood and analyzed to facilitate new multi-functional material design. An essential first step towards this goal is to understand how multi-physics properties depend on local details (e.g. micro-structure). Composite materials have heterogeneous electrical properties (carbon/epoxy) at the local level that can be different at the global level. To conduct the multi-physics study, the electrical signal is employed to the composite sample for …

Interest Detection In Image, Video And Multiple Videos: Model And Applications, Yuewei Lin

Theses and Dissertations

Interest detection is detecting an object, event, or process that draws attention. In this dissertation, we focus on interest detection in images, video and multiple videos. Interest detection in an image or a video is closely related to visual attention. However, the interest detection in multiple videos needs to consider all the videos as a whole rather than considering the attention in each single video independently.

Visual attention is an important mechanism of human vision. The computational model of visual attention has recently attracted a lot of interest in the computer vision community mainly because it helps find the objects …

Characterization Of Human-Induced Vibrations, Benjamin Thomas Davis

Theses and Dissertations

In the US alone, 20% of citizens will be over the age of 65 by the year 2030, and the largest challenge facing this growing demographic is not a new disease but a simple motion - the fall. These events are the premier cause of fatal and nonfatal injuries. In fact, a fall is so common that every 17 seconds an older adult is treated for fall-related injuries, and every 30 minutes, an older adult dies from fall complications. Research has shown a positive outcome of a fall event is largely dependent on the immediate response (<30 minutes) and rescue of the person.

This work explores …

Deformation Induced Martensitic Transformation In 304 Stainless Steels, Junliang Liu

Theses and Dissertations

304 stainless steel is an austenitic steel widely used for various applications due to a good combination of strength and ductility and relative low cost. It is known to be metastable as the austenite phase can transform into martensite under stress. In this work, a new method (in-situ tensile TEM) and the traditional method (ex-situ tensile tests and TEM, XRD characterization) were used to investigate the mechanisms of deformation-induced martensitic transformation in 304SS samples at different temperatures.

The ex-situ tensile tests were conducted under a strain rate of 10-3 s-1 until rupture. After the tensile tests, the fractured area was …

Improving Cooling Tower Chemistry Control And Cost Savings Through Automation, Ryan Matthew Maxwell

Theses and Dissertations

Proper chemistry control of cooling towers reduces corrosion, biological growth, and precipitation of solids. Therefore, improving control can lead to increased equipment life, operating efficiency, and safety. Chemistry of cooling towers is highly dependent on loading, weather, and time. As such, cooling tower chemistry varies day to day and even hour to hour, requiring either continuous controls or large operating bands. Through automation, 24/7 monitoring and control can be achieved, allowing for deliberate operation within tight operating bands. As a direct result of automation water consumption has been reduced by 9.1 million gallons per year, CL-49 use has been reduced …

A Comparison Of Fpga Implementation Of Latency-Based Solvers For Power Electronic System Real-Time Simulation, Matthew Aaron Milton

Theses and Dissertations

In the design of power systems, real-time simulation is a powerful tool to evaluate and validate designs before dedicating resources to develop such systems. Through use of real-time simulation, one can study the behavior of a power system in interaction with real, physical elements, all while avoiding the cost and risk in constructing and testing such systems before a design is finalized. In recent decades, effort has been made in the industry and academia to apply real-time simulation to that of switching power converters through use of high-speed digital signal processors (DSPs) and field programmable gate array (FPGA) devices. With …

Physics Based Modeling Of Guided Waves For Detection And Characterization Of Structural Damage In Nde And Shm, Banibrata Poddar

Theses and Dissertations

Guided waves based damage detection techniques are popular for their ease of generation and detection along with their ability to travel long distances. Accurate and efficient modeling is a key for successful implementation of guided waves for NDE/SHM. However, efficient prediction of scattering from various damage is challenging due to the complex nature of these guided waves.

This dissertation presents as physics based efficient and accurate modeling techniques to predict ultrasonic wave propagation and their interaction with various damage. Detection and characterization of damage in structures can typically be divided into two categories, active and passive. This research is aimed …

Detection Of Periodic Error And Structure Change Using Wavelet Analysis, Chao Lu

Theses and Dissertations

Heterodyne displacement measuring interferometry provides important metrology for applications requiring high resolution and accuracy. Heterodyne Michelson interferometers use a two-frequency laser source and separate the two optical frequencies into one fixed length and one variable length path via polarization. Ideally these two beams are linearly polarized and orthogonal so that only one frequency is directed toward each path. An interference signal is obtained by recombining the light from the two paths; this results in a measurement signal at the heterodyne (split) frequency of the laser source. This measurement signal is compared to the optical reference signal. Motion in the measurement …

Distributed Optimization And Control Of Islanded Microgrids, Md Rishad Hossain

Theses and Dissertations

A microgrid may have numerous multi-functional power electronic converters connecting sources, loads, and storage to the system. Systems where converters are the interface between many of the main sources of energy and load centers have the ability to direct the flow of energy if the control of the converters is coordinated. The influence of energy flow in a microgrid by coordinated action of converters is referred to here as ‘energy routing’. Energy routing allows for reduction of systems losses by optimizing source operating points and reducing transmission and distribution path losses. Energy ramp rates at various points in the system …

Engineering Model Of Iii-Nitride Power Heterostructure Field Effect Transistor On Silicon Substrate, Mohammad Mirwazul Islam

Theses and Dissertations

In modern society, the demand for power consumption is increasing rapidly and the need of energy savings is now an issue of global importance. Highly efficient power converters and power conditioning systems operating with wide range of traditional as well as novel renewable and clean energy sources, are playing crucial role in energy saving. Si converters have already reached their limitation in terms of switching frequency and breakdown voltage/on-resistance ratio. Research is going on all around the world and it is now well accepted that significant improvement in power conversion efficiency and speed can only be achieved using beyond Si …

The Oxidation And Decoration Chemistry Of Platinum And Palladium Nanoparticles On Carbon Supports, Ritubarna Banerjee

Theses and Dissertations

Ultrasmall platinum and palladium nanoparticles supported on carbon are used in a wide variety of industrial catalytic processes including hydrogenation-dehydrogenation reactions, isomerization of hydrocarbons, ammonia and formic acid decomposition, the oxidation of carbon monoxide, alcohols and ammonia, and fuel cells. This dissertation covers three aspects of the chemistry of these ultrasmall, carbon supported nanoparticles.

In the first vein of work, the oft-observed discrepancy in Pd nanoparticle size estimation between chemisorption and other methods such as STEM and XRD is explored. It is demonstrated that lower-than-expected chemisorption uptake can stem from not only residual chloride, but also from the decoration of …

Modeling Embankment Breach Due To Overtopping, Ali Asghari Tabrizi

Theses and Dissertations

Despite numerous embankment failures around the world, in-depth assessments as well as reliable, comprehensive sets of data of such failures are limited. Detailed understanding of the earthen embankment failure process and the dominant parameters affecting the failure are needed to predict and model the breach process precisely. Therefore, a series of laboratory experiments on embankment (i.e., dam and levee) overtopping as well as erodibility measurements using the Submerged Jet test are conducted. Also, to study the influence of different model parameters (e.g., turbulence model, bedload formula), one of the dam embankment experiments is simulated. The main goal of this research …

Evaluation Of Concrete Degradation Using Acoustic Emission: Data Filtering And Damage Detection, Marwa A. Abdelrahman

Theses and Dissertations

The prevalence of aging and deteriorating infrastructure in the U.S. has raised concerns regarding its level of serviceability, reliability, and vulnerability to natural disasters. This issue has gained attention recently and efforts are being conducted to accelerate the delivery of enhanced nondestructive testing (NDT) and structural health monitoring (SHM) methods. Acoustic emission (AE) is a strong candidate for these applications due to its high sensitivity and potential for damage detection in different materials. However, several challenges associated with the technique hinder the development of automated, reliable, real-time SHM using AE.

This study aims to advance the use of AE for …

Investigation Of Heterogeneous Chemistry Of Pollutants In Flue Gas For Air And Oxy-Combustion, Benjamin D. Galloway

Theses and Dissertations

Due to increasing concerns associated with the emissions created from the combustion of coal, technologies are being modified or developed to limit many of these harmful emissions. The content of this thesis will focus on two technologies and the specific pollutants they seek to limit. The first investigated is selective catalytic reduction, which is utilized to decrease NO emissions. Due to the recent promulgation of the MATS regulations, focus has been on reducing the Hg emissions through the optimization of the SCR catalysts, making them bi-functional for NO reduction and Hg oxidation. The work presented here focuses on a novel …