Engineering Commons^™

System Level Analysis And Design For Wireless Inter-Chip Interconnection Communication Systems By Applying Advanced Wireless Communication Technologies, Xin Zheng

Theses and Dissertations

As the dramatic development of high speed integrated circuits has progressed, the 60 GHz silicon technology has been introduced to enable much faster computer systems and their corresponding applications. However, when signals are propagating at 60 GHz or higher frequencies on a PCB (Printed Circuit Board), the crosstalk among signal buses and devices, trace losses, and introduced parasitic capacitance and inductance between high density traces, become significant and may be severe enough such that the inter-chip communications will not be able to meet computer system signal specifications. High speed circuit signal integrity researchers in both electronic industries and academia have …

Improving Machine Changeover/Setup Times By Increasing U.S. Manufacturers' Knowledge Of 5s, Nicole Schra-Martin

Walden Dissertations and Doctoral Studies

The 5S process is one of the techniques born out of Japanese manufacturing. Ohno, the developer of 5S, found that when manufacturing waste is eliminated, costs are reduced and profits increase. This is the bases of 5S and this research. The cost of U.S. manufactured products is higher compared to the cost of products from other global manufacturers that use 5S. This study was conducted to determine if implementing 5S in U.S. manufacturing could change U.S. manufacturing cost and if using 5S could impact U.S. manufacturing. The research questions focused on the relationship between 5S and changeover/setup times on production …

Friction Stir Welding And Processing On Titanium Alloys, Dawei Li

Theses and Dissertations

Friction stir welding (FSW) is a solid-state joining process that utilizes a non-consumable, rotating tool to plunge into abutting faces and transverse along the weld path. Material nearby the tool is softened by frictional heat generated via local friction and plastic deformation. Severe plastic deformation of the interface along with a state of hydrostatic pressure results in creation of a joint by metallurgical bonding. Because the temperature of the material during the welding process is below that of the melting point, FSW has numerous advantages over conventional fusion welding. Friction consolidation (FC) is also a solid-state process that uses a …

Sulfate-Reducing Bacteria Community Analysis: Isco/Isb Coupled Remediation, Christopher K. Bartlett

Theses and Dissertations (Comprehensive)

Improved techniques for remediating groundwater systems are required for the more than 500,000 contaminated sites in North America. Many of these sites are the legacy of historical industrial operations, inappropriate disposal practices and accidental releases. The most widely observed contaminant at many of these sites is petroleum hydrocarbons (PHCs). Recently, remediation efforts that involve the sequential application of treatment technologies have gained widespread interest. One specific sequential technology application or treatment train employs the aggressive nature of a chemical oxidation followed by bioremediation for polishing. When persulfate is used as the chemical oxidant its natural degradation by-product is sulfate, an …

Chemical Removal Of Total Phosphorus From Wastewater To Low Levels And Its Analysis, Farah Ateeq

Theses and Dissertations (Comprehensive)

Numerous studies have been conducted on the removal of inorganic phosphorus (P) from wastewater, but a push towards lower effluent targets necessitates the additional removal of organic phosphorus as well. This study tested the ability of manganese oxide nanoparticles and iron oxide as potential catalysts for conversion of organic P into more readily removable inorganic forms, as well as the role of iron(III) chloride as coagulant to subsequently allow P to be removed by solids/liquid separation. Removals of 99-101% were obtained for model compounds at pH 5-7, 0.05-0.5 M H₂O₂, and Fe:P molar ratio of 5:1. …

Scalability Of Microscale Fractal-Like Branching Channel Networks, James R. Miller Iii

Honors College Theses

Fractal-like branching channel networks have been shown to offer the advantages of reduced pumping power and lower maximum wall temperatures when employed in the design of microscale heat sinks. Unfortunately, previous literature has been limited to microscale flow networks. In this paper, a microscale flow network will be scaled up to result in a mesoscale flow network and a macroscale flow network. In order to compare the pressure drop across the flow networks of varying scales the results will be nondimensionalized in the form of the Euler number. For a laminar inlet Reynolds number the microscale, mesoscale, and macroscale fractal-like …

Carinata Fame Production Process And Biofuel Oxidation, Benoit Kindo

Honors College Theses

In this experiment, the contribution of a standard production method for biofuels on their oxidative stability was investigated. Peroxide values were measured at different steps of the production process of Brassica carinata and peanut-based biofuels. The washing and drying steps in this production method showed significant increases in peroxide values for both biofuels and was identified as a major contributor of biofuel oxidation. Further analyses of the physical and thermal properties showed a more pronounced affect in the biofuel from Bassica carinata, and indicated an unusual composition much higher in saturated fatty acids much longer than those found in peanut. …

Water Demand Forecasting In Al-Ain City, United Arab Emirates, Hebah Ibrahim Younis

Theses

Al-Ain city is the second largest city in the Emirate of Abu Dhabi and the third in the United Arab Emirates (UAE). Currently, desalination plants are the only source of municipal water in Al-Ain city with an average daily supply of 170 MIG. The expected natural population growth, in addition to future projects, will certainly put additional stress on the water resources in the city. Therefore, Al-Ain city seems to be in an urgent need for estimations of future water demands for achieving sustainable development. The main aim of this thesis is to introduce a water demand forecasting model to …

Effect Of Ce And Co Addition To Fe/Al2o3 For Catalytic Methane Decomposition, Ahmed S. Al-Fatesh, Ashraf Amin, Ahmed A. Ibrahim, Wasim Ullah Khan, Moustafa A. Soliman, Raja L. Al-Otaibi, Anis H. Fakeeha

Chemical Engineering

Catalytic methane decomposition is studied in a fixed bed reactor. Two sets of bimetallic catalysts are employed, namely: 30%Fe-X%Ce/Al2O3 and 30%Fe-X%Co/Al2O3, and compared with monometallic 30%Fe/Al2O3 catalyst. The effect of promoting Fe with Ce and Co and reduction temperature are investigated. The results reveal that Ce addition has shown a negative impact on H2 yield while a positive effect on H2 yield and catalyst stability are observed with Co addition. In terms of number of moles of produced hydrogen per active sites, Fe/Al2O3 has shown a higher number of moles of hydrogen compared to bimetallic catalysts. The catalyst reduced at …

Reaction Parameters And Energy Optimisation For Biodiesel Production Using A Supercritical Process, Nessren Farrag, Mamdouh Gadalla, Mai Fouad

Chemical Engineering

No abstract provided.

An Overview Of Production And Development Of Ceramic Membranes, Shereen Kamel Amin, Heba Mohamed Abdallah, Mai H. Roushdy, Chakinaz Aly El-Sherbiny

Chemical Engineering

Ceramic membranes became one of the most important ceramic products because of their numerous benefits. Many attempts have been made by researchers to produce ceramic membranes with modified properties by varying their raw materials. Some of these attempts included incorporating wastes into their production process. Examples of such waste are fly ash wastes, glass waste, mud resulting from the hydro cyclone laundries, cortical bone animal, coal gangue, sawdust, construction waste and rice husk. An ideal waste would be priceless waste while at the same time assisting minimizing pollution. Such a situation deals with a dual economic and environmental aspect. This …

Rapid And Accurate C-V Measurements, Ji-Hong Kim, Pragya R. Shrestha, Jason P. Campbell, Jason T. Ryan, David Nminibapiel, Joseph J. Kopanski

Electrical & Computer Engineering Faculty Publications

We report a new technique for the rapid measurement of full capacitance-voltage (C-V) characteristic curves. The displacement current from a 100-MHz applied sine wave, which swings from accumulation to strong inversion, is digitized directly using an oscilloscope from the MOS capacitor under test. A C-V curve can be constructed directly from this data but is severely distorted due to nonideal behavior of real measurement systems. The key advance of this paper is to extract the system response function using the same measurement setup and a known MOS capacitor. The system response correction to the measured C-V curve of the unknown …

Developing A Student Learning Strategy To Bridge Virtual Learning And Hands-On Activity, Gon Namkoong, Hargsoon Yoon, Yonghee Suh

Electrical & Computer Engineering Faculty Publications

This paper addresses the effectiveness of combined virtual and physical hands-on activities in students’ learning which was infused in the capstone senior design project. Senior design projects are open-ended and are similar to the research that scientists perform toward a more comprehensive understanding of nature or new scientific knowledge. As a reinforced learning methodology to greatly assist students’ reasoning and problem-solving skills, virtual learning was first integrated at the planning stage of their projects. This approach is in contrast with the typical senior design courses where only limited resources are available for planning experiments. Using virtual learning, students are able …

First-Year Project Experience In Aerospace: Apogee Determination Of Model Rockets With Explicit Consideration Of Drag Effect, Hüseyin Sarper, Drew Landman, Linda Vahala

Electrical & Computer Engineering Faculty Publications

This paper describes a student team project using model rockets and engines to learn engineering solution methods for determining the apogee of model rocket when the drag effect is considered explicitly instead of estimating its effect later. Model rocketry is a powerful tool for instructors who wish to incorporate science, engineering, and mathematics into a fun, engaging, and challenging activity for the students. The apogee can be determined using a number of distinct methods: trigonometry, onboard altimeters, analytical calculations, and simulation. This paper emphasizes numerical analytical solution using spreadsheet programming instead of a full analytical solution that requires higher mathematics. …

Spatio-Temporal Progression Of Cortical Activity Related To Continuous Overt And Covert Speech Production In A Reading Task, Jonathan S. Brumberg, Dean J. Krusienski, Shreya Chakrabarti, Aysegul Gunduz, Peter Brunner, Anthony L. Ritaccio, Gerwin Schalk

Electrical & Computer Engineering Faculty Publications

How the human brain plans, executes, and monitors continuous and fluent speech has remained largely elusive. For example, previous research has defined the cortical locations most important for different aspects of speech function, but has not yet yielded a definition of the temporal progression of involvement of those locations as speech progresses either overtly or covertly. In this paper, we uncovered the spatio-temporal evolution of neuronal population-level activity related to continuous overt speech, and identified those locations that shared activity characteristics across overt and covert speech. Specifically, we asked subjects to repeat continuous sentences aloud or silently while we recorded …

Phosphorus Removal Using Titanium Dioxide Nanoparticles In Wastewater Treatment, Suyoung Choi Mr.

Theses and Dissertations (Comprehensive)

Due to eutrophication caused by nutrients such as phosphorus (P), local surface water near military garrisons and camps has been deteriorated for several years in the Republic of Korea. Thus, in order to remove excessive P in local fresh water, various size of titanium dioxide (TiO₂) were used.

In the first investigation, TiO₂ mixed bulk powder (particle size > 5µm) showed maximum P removal with pH dependence (higher pH shows lower P removal), that was approximately 27%. To determine adsorption isotherms, Langmuir and Freudlich models were used. The experimental data was better fit by a Langmuir model compared …

Methods And Implementation Of Fluid-Structure Interaction Modeling Into An Industry-Accepted Design Tool, Donn R. Sederstrom

Electronic Theses and Dissertations

Fluid-structure interaction (FSI) modeling is a method by which fluid and solid domains are coupled together to produce a single result that cannot be produced if each physical domain was evaluated individually. The work presented in this dissertation is a demonstration of the methods and implementation of FSI modeling into an industry-appropriate design tool. Through utilizing computationally inexpensive equipment and commercially available software, the studies presented in this work demonstrate the ability for FSI modeling to become a tool used broadly in industry.

To demonstrate this capability, the cases studied purposely include substantial complexity to demonstrate the stability techniques required …

Regional Mechanical Properties And Microstructure Of Ovine Heart Chambers, Shahnaz Javani

Electronic Theses and Dissertations

Mechanical properties of cardiac tissue play an important role in the normal heart function. As a baseline for understanding of physiology and pathophysiology of the heart, and for development and validation of new therapies, it is crucial to first understand the mechanical behavior of the normal heart tissue. Although heart chambers have the same embryonic origin, differences in the development of mechanical properties are expected to manifest over time during the adulthood period. Therefore, the goal of this study was to determine the passive mechanical properties of all heart chambers through a paired comparison study in an ovine model. Ovine …

An Efficient Method For Optimizing Segmentation Parameters, Jacob D' Avy, Wei-Wen Hsu, Chung-Hao Chen, Andreas F. Koschan, Mongi Abidi

Electrical & Computer Engineering Faculty Publications

Segmenting an image into meaningful regions is an important step in many computer vision applications such as facial recognition, target tracking and medical image analysis. Because image segmentation is an ill-posed problem, parameters are needed to constrain the solution to one that is suitable for a given application. For a user, setting parameter values is often unintuitive. We present a method for automating segmentation parameter selection using an efficient search method to optimize a segmentation objective function. Efficiency is improved by utilizing prior knowledge about the relationship between a segmentation parameter and the objective function terms. An adaptive sampling of …

Sensor-Based Estimation Of Btex Concentrations In Water Samples Using Recursive Least Squares And Kalman Filter Techniques, Karthick Sothivelr, Florian Bender, Fabien Josse, Edwin E. Yaz, Antonio J. Ricco

Electrical and Computer Engineering Faculty Research and Publications

This work investigates sensor signal processing approaches that can be used with a sensor system for direct on-site monitoring of groundwater, enabling detection and quantification of BTEX (benzene, toluene, ethylbenzene and xylene) compounds at μg/L (ppb) concentrations in the presence of interferents commonly found in groundwater. A model for the sensor response to water samples containing multiple analytes was first formulated based on experimental results. The first signal processing approach utilizes only RLSE (recursive least squares estimation) whereas the second, a two-step processing technique, utilizes both RLSE and bank of Kalman filters for the estimation process. The estimation techniques were …

An Aircraft Evacuation Simulation Baseline Using Des For Passenger Path Planning, Xiaoqing Deng

Doctoral Dissertations and Master's Theses

This paper introduced a Discrete Event Simulation (DES) model that simulates passengers’ evacuation paths and decision-making processes during aircraft certification. The model was built using ARENA® 14, which is a DES simulation tool. This model used A380 cabin configuration with capacity of 538 passengers. Each passenger was considered as an independent human being with variations in walking speed, decision-making processes, and evacuation path. This model generated total evacuation time and presented total congestion conditions of each gate. Federal Regulation has suggested that all passengers in the airplane should finish the evacuation within 90 seconds. The model was validated with the …

Finite Element And Probabilistic Analysis Of Soft Tissue Structures Of The Human Lumbar Spine, Dana Joseph Coombs

Electronic Theses and Dissertations

Human lumbar spine mechanics are influenced by soft tissue structures. Understanding and properly modeling these structures can help determine pathology, treatment, and implant design and performance. Finite element models of the L4-L5 level of the lumbar spine are often used, which include a representation of the intervertebral disc and spinal ligaments. Validation of these models are typically based on torque rotation data from a single subject or the models use average properties reported in literature. However, experimental testing reports variation up to 40% in ligament stiffness and even greater variability for annulus fibrosis properties. Probabilistic approaches enable consideration of the …

Low-Velocity Impact To High-Temperature Low-Sag Overhead Conductors, Daniel Halka Waters

Electronic Theses and Dissertations

High-Temperature Low-Sag (HTLS) conductors, such as Aluminum Conductor Composite Core (ACCC), improve infrastructure to support the delivery of power to meet the nation's increasing demand for electricity. Their response to low-velocity impacts during transportation, installation or in service, however, has not been addressed in the past. Therefore, this study investigates both experimentally and numerically mechanical effects associated with transverse low-velocity impacts on energy dissipation by the conductors subjected to either free or constrained end conditions and large axial tensile loads. Impact experiments were conducted using a newly designed and manufactured testing apparatus. The experimental work was strongly supported by non-linear …

Anatomy, Implant Selection And Placement Influence Spine Mechanics Associated With Total Disc Replacement, Justin F.M. Hollenbeck

Electronic Theses and Dissertations

Through aging and injury, the intervertebral disc of the lumbar spine can undergo degeneration, leading to collapse of the vertebrae and low back pain, a symptom that affects half the adult population in any given year. In an effort to reduce low back pain, total disc replacement treatment removes the degenerated disc, restores natural height and lordosis of the segment, and preserves motion at the joint. Patient anatomy, implant selection, and implant placement play significant roles in a patient's outcomes after total disc replacement surgery. Thus, the objective of the work presented in this thesis was to develop a suite …

Knee Internal Forces In Moderate Squat Exercise, Dumitru I. Caruntu, Jose Mario Salinas

Mechanical Engineering Faculty Publications

This paper deals with internal forces of human knee during moderate squat exercise. The moderate squat exercise consists of a descending phase from standing to the lowest position (largest flexion angle) in which no significant contact between thigh and calf occurs, and an ascending phase back to standing position. This research predicts the internal forces such as muscle forces, contact forces, and ligamentous forces. The ligamentous structures in this research consist of Anterior Cruciate Ligament (ACL), Posterior Cruciate Ligament (PCL), Lateral Collateral Ligament (LCL), and Medial Collateral Ligament (MCL). The ligaments are modeled as nonlinear elastic strips (they do not …

Production Of Β-Silicon Carbide Nanofibers Using The Forcespinning® Method, Alfonso Salinas, Aleksey Altecor, Maricela Lizcano, Karen Lozano

Mechanical Engineering Faculty Publications

Silicon carbide (SiC) nanofibers were produced on a large scale using the Forcespinning® method. Non-oxide ceramics such as SiC are known for their low density, oxidation resistance, thermal stability, and wear resistance. The nanofibers were prepared using a solution-based method with polystyrene and polycarbomethylsilane as the precursor materials. Fiber spinning was performed under different parameters to obtain high yield, fiber homogeneity, and small diameters. The fibers were spun under a controlled nitrogen environment to prevent fiber oxidation. The resultant nonwoven nanofiber mats were then subjected to different heat treatments to evaluate the effect of these on the crystalline structure. Characterization …

14-08 Big Data Analytics To Aid Developing Livable Communities, Li Yang, Hyunkeun Cho, Jun-Seok Oh

Transportation Research Center Reports

In transportation, ubiquitous deployment of low-cost sensors combined with powerful computer hardware and high-speed network makes big data available. USDOT defines big data research in transportation as a number of advanced techniques applied to the capture, management and analysis of very large and diverse volumes of data. Data in transportation are usually well organized into tables and are characterized by relatively low dimensionality and yet huge numbers of records. Therefore, big data research in transportation has unique challenges on how to effectively process huge amounts of data records and data streams. The purpose of this study is to conduct research …

Atap Otomatis Sensor Suhu, Air Dan Tenaga Surya (Alas Tsusu), Koko Hendriawan

Elinvo (Electronics, Informatics, and Vocational Education)

Atap otomatis sensor suhu,sensor air dan surya(ALAS TSUSU) sebagai inovasi desain atap yang dapat membuka dan menutup secara otomatis.Atap adalah salah satu komponen yang sangat penting dalam sebuah bangunan. Dengan adanya dua musim yang di miliki Negara Indonesia Antara musim hujan dan kemarau atap tidak hanya sebagai fungsi utama dalam melidungi kita dari matahari dan hujan akan tetapi juga memiliki nilai estetika yang sangat tinggi misalnya intensitas cahaya yang diterima bumi kurang terang dengan rain probability (kemungkinan turun hujan) tinggi. Sedangkan pada musim kemarau, sinar matahari lebih terang dengan kemungkinan turun hujan sangat rendah, bahkan hampir tidak pernah turun hujan. …

Analisis Penerapan Sistem Informasi Akademik (Siakad) 2013 Menggunakan Model End-User Computing Satisfaction (Eucs) Di Program Studi Pendidikan Teknik Informatika, Handaru Jati

Elinvo (Electronics, Informatics, and Vocational Education)

Penelitian ini bertujuan untuk mengetahui: (1) pengaruh content terhadap user satisfaction; (2) pengaruh accuracy terhadap user satisfaction; (3) pengaruh format terhadap user satisfaction; (4) pengaruh ease of use terhadap user satisfaction; (5) pengaruh timeliness terhadap user satisfaction. Penelitian ini merupakan penelitian ex-post facto, yang dilaksanakan di Program Studi Pendidikan Teknik Informatika. Teknik pengambilan sampel dengan purposive sampling. Sampel yang diambil merupakan mahasiswa angkatan 2013 dan 2014 yang sudah menggunakan SIAKAD 2013 . Data diperoleh dengan kuesioner tertutup yang telah memenuhi persyaratan validitas dan reliabilitas. Teknik analisis data yang digunakan adalah Partial Least Square (PLS). Hasil penelitian menunjukkan bahwa: (1) content …

Penilaian Efisiensi Universitas Lptk Di Indonesia Dengan Menggunakan Data Envelopment Analysis, Handaru Jati

Elinvo (Electronics, Informatics, and Vocational Education)

Seiring meningkatnya keinginan untuk melanjutkan kuliah ke Perguruan Tinggi bagi lulusan sekolah menengah di Indonesia dan semakin tingginya biaya yang ditanggung oleh calon mahasiswa, pemerintah dihadapkan pada kondisi untuk mendorong universitas agar dapat beroperasi dengan lebih efisien dan lebih produktif. Tujuan penelitian ini adalah mengembangkan metode baru penilaian efisiensi universitas Lembaga Pendidikan Tenaga Keguruan (LPTK) di Indonesia dengan mempergunakan Data Envelopment Analysis yang secara teknis efektif untuk menghitung efisiensi sebuah Universitas. Penelitian ini merupakan penelitian research and development yang dilaksanakan dalam kegiatan yang meliputi analisis kebutuhan yaitu pengkajian variabel yang akan menjadi factor penilaian efisiensi beserta mekanisme pengumpulan datanya, disain …