Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 101431 - 101460 of 198086

Full-Text Articles in Engineering

Computational Modeling Of A 60kw Oxy-Methane Direct Power Extraction Combustor, Omar Daniel Vidana Jan 2016

Computational Modeling Of A 60kw Oxy-Methane Direct Power Extraction Combustor, Omar Daniel Vidana

Open Access Theses & Dissertations

ANSYS Fluent was used to optimize components of a direct power extraction combustor. This includes the fuel injector, nozzle, and cooling units. Changes in the injector's inlet location impacted pressure and velocity distribution. An angle of 115 degrees with respect to the x-axis was found to increase distribution efficiency. Temperature and velocity data from the combustor and nozzle were calculated using NASA CEA and Fluent. Magnitudes of temperature and velocity for CEA and Fluent matched within 9% and 4%, respectively. For the cooling system it is expected that cavitation will not occur since the saturation temperature of water is not …

Go to article

Use Of Dynamic Visualizations For Engineering Technology, Industrial Technology, And Science Education Students: Implications On Ability To Correctly Create A Sectional View Sketch, Petros J. Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred V. Jones Jan 2016

Use Of Dynamic Visualizations For Engineering Technology, Industrial Technology, And Science Education Students: Implications On Ability To Correctly Create A Sectional View Sketch, Petros J. Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred V. Jones

Engineering Technology Faculty Publications

Spatial abilities, specifically visualization, play a significant role in the achievement in a wide array of professions including, but not limited to, engineering, technical, mathematical, and scientific professions. However, there is little correlation between the advantages of spatial ability as measured through the creation of a sectional-view sketch between engineering technology, industrial technology, and science education students. A causal-comparative study was selected as a means to perform the comparative analysis of spatial visualization ability. This study was done to determine the existence of statistically significant difference between engineering technology, industrial technology, and science education students’ ability to correctly create a …

Go to article

Embedding Online Based Learning Strategies Into The Engineering Technology Curriculum, Vukica M. Jovanovic, Otilia Popescu, Orlando M. Ayala, Mileta Tomovic, Alok K. Verma Jan 2016

Embedding Online Based Learning Strategies Into The Engineering Technology Curriculum, Vukica M. Jovanovic, Otilia Popescu, Orlando M. Ayala, Mileta Tomovic, Alok K. Verma

Engineering Technology Faculty Publications

Various blended learning strategies have been implemented at engineering technology programs to facilitate different learning styles and different time constraints given to faculty. Some of these efforts are related to the effective use of online tools such as online course management systems, ePortfolios, narrated presentations, web-based polling systems, tutorials and educational materials posted before the class and asynchronous learning methods. As technology changes, some of the online learning methods are getting more advanced which is enabling more innovative approaches and data compression. Various distance learning programs started with having access to videos of recorded lectures (on VHS tapes, or CDs) …

Go to article

Period Batch Control - A Production Planning System Applied To Virtual Manufacturing Cells, Z. Tesic, B. Stevanaov, V. Jovanovic, M. Tomic, C. Kafol Jan 2016

Period Batch Control - A Production Planning System Applied To Virtual Manufacturing Cells, Z. Tesic, B. Stevanaov, V. Jovanovic, M. Tomic, C. Kafol

Engineering Technology Faculty Publications

Period Batch Control (PBC) system has been known for its implementation with the classical group technology (GT) cells, and it has been known for its simplicity. The main production planning decisions concern the choice of the period length and the stage number and contents. Also, in order to better integrate the production planning with the application of GT cells at the shop floor, the concept of virtual manufacturing cells has been applied. Since virtual cells configurations are changing periodically, a model for implementing the PBC system into virtual manufacturing cells environment is developed. The model enables alignment of the PBC …

Go to article

Pilot Programs For Veterans Transition To Engineering Fields, Vukica M. Jovanovic, Anthony W. Dean, Carol L. Considine, Karina Arcaute, Petros Katsioloudis, Mileta Tomovic, Thomas B. Stout, Connor Schwalm, Jennifer G. Michaeli, Yuzhong Shen Jan 2016

Pilot Programs For Veterans Transition To Engineering Fields, Vukica M. Jovanovic, Anthony W. Dean, Carol L. Considine, Karina Arcaute, Petros Katsioloudis, Mileta Tomovic, Thomas B. Stout, Connor Schwalm, Jennifer G. Michaeli, Yuzhong Shen

Engineering Technology Faculty Publications

Veterans, through their active service, frequently receive training in highly skilled technical areas. However, they may lack a theoretical background in underlying engineering principles. They also need additional support with the transition from a highly structured military environment to an environment with more ambiguous time constraints and different sorts of responsibilities. Moreover they are facing challenges which are specific for their student population. Therefore, enabling multiple mechanisms which would support them and provide them necessary guidance are especially important at universities with large veteran populations such as at Old Dominion University in Norfolk, Virginia. Hence, there is a need for …

Go to article

Competencies Related To Marine Mechatronics Education, Vukica M. Jovanovic, Petros J. Katsioloudis, Mileta Tomovic, Thomas B. Stout Jan 2016

Competencies Related To Marine Mechatronics Education, Vukica M. Jovanovic, Petros J. Katsioloudis, Mileta Tomovic, Thomas B. Stout

Engineering Technology Faculty Publications

Recent changes in the needs of the military have caused the U.S. Navy to spend more time out to sea. Longer deployments limit the time available for performing maintenance and for training their technicians. The Navy is also steadily reducing the number of sailors manning each vessel, therefore requiring more automated systems to keep the ships at sea and in total readiness. To meet this need, industrial automation systems are being investigated as replacements and upgrades for the military systems that have been used for years in warship designs. This will require ship repair partners, both military and civilian, to …

Go to article

A Pilot Program For The Recruitment And Education Of Navy Veterans Based On System-Level Technical Expertise And Leadership Maturation Developed During Service, Anthony W. Dean, Connor Schwalm, Patrick S. Heaney, Linda Vahala, Yuzhong Shen, Jennifer G. Michaeli Jan 2016

A Pilot Program For The Recruitment And Education Of Navy Veterans Based On System-Level Technical Expertise And Leadership Maturation Developed During Service, Anthony W. Dean, Connor Schwalm, Patrick S. Heaney, Linda Vahala, Yuzhong Shen, Jennifer G. Michaeli

Engineering Technology Faculty Publications

The project, Stern2STEM, aims to advance STEM (Science, Technology, Engineering, and Mathematics) education through the preparation of student veterans to pursue baccalaureate STEM degrees and support the re-employment of these veterans into the Department of Defense (DoD) and the wider defense support industry. The program builds on the training that veterans have received in highly skilled technical areas, both in the classroom and “on-the-job”, to develop system level expertise in their respective technical disciplines. Key components of the program include: (1) establishing a mechanism for outreach and recruitment; (2) providing leveling, tutoring, mentoring, and support for students; (3) teaching …

Go to article

Extensive Sensitivity Analysis And Parallel Stochastic Global Optimization Using Radial Basis Functions Of Integrated Biorefineries Under Operational Level Uncertainties, Santiago David Salas Ortiz Jan 2016

Extensive Sensitivity Analysis And Parallel Stochastic Global Optimization Using Radial Basis Functions Of Integrated Biorefineries Under Operational Level Uncertainties, Santiago David Salas Ortiz

LSU Master's Theses

This work presents a decision-making framework for global optimization of detailed renewable energy processes considering technological uncertainty. The critical uncertain sources are identified with an efficient computational method for global sensitivity analysis, and are obtained in two different ways, simultaneously and independently per product pathway respect to the objective function. For global optimization, the parallel stochastic response surface method developed by Regis & Shoemaker (2009) is employed. This algorithm is based on the multi-start local metric stochastic response surface method explored by the same authors (2007a). The aforementioned algorithm uses as response surface model a radial basis function (RBF) for …

Go to article

A Numerical Investigation Of Wellbore Stability Problems Using An Elastoplastic Model, Chang Huang Jan 2016

A Numerical Investigation Of Wellbore Stability Problems Using An Elastoplastic Model, Chang Huang

LSU Master's Theses

Wellbore stability analysis acts an important role in the drilling design to avoid pipe-stuck, lost circulation and the other instability-induced problems. However, the conventional linear elastic model used by the industry is too conservative in predicting the mud weight window. This project is aimed at improving the accuracy of wellbore stability analysis. An elastoplastic model with Drucker-Prager yield criterion featured by strain hardening is proposed to characterize the rock behavior. Object-oriented finite element analysis simulator, NSMOOM, is programmed in MATLAB. The simulator is verified with the analytical solution in the elastic domain and with the commercial software ABAQUS in the …

Go to article

Optimal Configuration Of Inspection And Rework Stations In A Multistage Flexible Flowline, Md. Shahriar Jahan Hossain Jan 2016

Optimal Configuration Of Inspection And Rework Stations In A Multistage Flexible Flowline, Md. Shahriar Jahan Hossain

LSU Master's Theses

Inspection and rework are two important issues of quality control. In this research, an N-stage flowline is considered to make decisions on these two issues. When defective items are detected at the inspection station the items are either scrapped or reworked. A reworkable item may be repaired at the regular defect-creating workstation or at a dedicated off-line rework station. Two problems (end-of-line and multistage inspections) are considered here to deal with this situation. The end-of-line inspection (ELI) problem considers an inspection station located at the end of the line while the multistage inspection (MSI) problem deals with multiple in-line inspection …

Go to article

A Study Of Fpga Resource Utilization For Pipelined Windowed Image Computations, Aswin Vijaya Varma Jan 2016

A Study Of Fpga Resource Utilization For Pipelined Windowed Image Computations, Aswin Vijaya Varma

LSU Master's Theses

In image processing operations, each pixel is often treated independently and operated upon by using values of other pixels in the neighborhood. These operations are often called windowed image computations (or neighborhood operations). In this thesis, we examine the implementation of a windowed computation pipeline in an FPGA-based environment. Typically, the image is generated outside the FPGA environment (such as through a camera) and the result of the windowed computation is consumed outside the FPGA environment (for example, in a screen for display or an engine for higher level analysis). The image is typically large (over a million pixels 1000×1000 …

Go to article

A Frequency Hopping Method To Detect Replay Attacks, Guofu Tang Jan 2016

A Frequency Hopping Method To Detect Replay Attacks, Guofu Tang

LSU Master's Theses

The application of information technology in network control systems introduces the potential threats to the future industrial control system. The malicious attacks undermine the security of network control system, which could cause a huge economic loss. This thesis studies a particular cyber attack called the replay attack, which is motivated by the Stuxnet worm allegedly used against the nuclear facilities in Iran. For replay attack, this thesis injects the narrow-band signal into control signal and adopts the spectrum estimation approach to test the estimation residue. In order to protect the information of the injected signal from knowing by attackers, the …

Go to article

Evaluation Of Self-Healing Of Asphalt Concrete Through Induction Heating And Metallic Fibers, Yashwanth Pamulapati Jan 2016

Evaluation Of Self-Healing Of Asphalt Concrete Through Induction Heating And Metallic Fibers, Yashwanth Pamulapati

LSU Master's Theses

Healing by means of induction heating is promising, however the effectiveness of this technology is yet to be demonstrated due to limited studies on cracking damage and fracture resistance property recoveries after healing. The objective of this study was to test the hypothesis that a new generation of asphaltic materials could be artificially healed while in-service by embedding metallic fibers in the mix and by applying a magnetic field at the surface. To achieve this objective, an open-graded friction course (OGFC) was successfully designed and prepared to incorporate up to 5% steel and aluminum fibers by weight of the mix. …

Go to article

Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos Jan 2016

Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos

LSU Master's Theses

Hydraulic fracturing is recognized as the primary technique to achieve economic oil and gas production from low permeability reservoirs like shale and tight-sand formations. One of the main challenges facing the oil and gas industry is maintaining the proppant functionality in the subsurface where replacement of proppant is only possible by expensive refracturing operations. Proppant crushing and proppant embedment have posed challenges for sustainable production from stimulated wells especially in soft and deep formations like Haynesville Shales. Experimental measurements show the strong impact of proppant stress and proppant embedment on reducing fracture conductivity. In this work, we introduce a new …

Go to article

Enhancing Program Soft Error Resilience Through Algorithmic Approaches, Sui Chen Jan 2016

Enhancing Program Soft Error Resilience Through Algorithmic Approaches, Sui Chen

LSU Master's Theses

The rising count and shrinking feature size of transistors within modern computers is making them increasingly vulnerable to various types of soft faults. This problem is especially acute in high-performance computing (HPC) systems used for scientific computing, because these systems include many thousands of compute cores and nodes, all of which may be utilized in a single large-scale run. The increasing vulnerability of HPC applications to errors induced by soft faults is motivating extensive work on techniques to make these applications more resilient to such faults, ranging from generic techniques such as replication or checkpoint/restart to algorithm-specific error detection and …

Go to article

A Model Compound Study In Syngas Tar Reforming, Jaren Lee Jan 2016

A Model Compound Study In Syngas Tar Reforming, Jaren Lee

LSU Master's Theses

Biomass or coal gasification are promising processes for renewable energy. However, a major operating problem in gasification is what to do with syngas byproducts such as H2S and tars (heavy hydrocarbons) that cause catalyst deactivation downstream. Studies have shown that rare earth oxides (REOs) doped with transition metals are promising catalysts for tar reforming in the presence of sulfur.(R. Li, Roy, Bridges, & Dooley, 2014) In Chapter 1, propane is studied as a model compound for tar reforming with transition metal-doped (e.g., Mn, Fe) REOs. These are compared to a typical commercial Ni/Al2O3 catalyst. The results showed that REO/TM catalysts …

Go to article

Real And Reactive Power Control Of Induction Motor Drives, Juan Rafael Nunez Jan 2016

Real And Reactive Power Control Of Induction Motor Drives, Juan Rafael Nunez

LSU Master's Theses

Induction motors are considered the workhorse in the majority of industrial applications. Their rugged, low-maintenance, and efficient designs keep finding new forms of use nowadays. In this work, power control strategies of induction motor drives based on principles of Direct Torque Control and Model Predictive Control are investigated. The proposed methods control the real and reactive power flow into/out of the machine by selecting and applying proper voltage space phasors to the stator. First, the impact of voltage space phasors on real and reactive power variations is explored. Based on these observations, two methods to choose the appropriate voltage space …

Go to article

Effects Of Temperature Segregation On The Denisity And Mechanical Properties Of Asphalt Mixtures, Pranjal Pravin Phaltane Jan 2016

Effects Of Temperature Segregation On The Denisity And Mechanical Properties Of Asphalt Mixtures, Pranjal Pravin Phaltane

LSU Master's Theses

Temperature differentials (TD) between the target laydown and actual laydown temperatures of asphalt paving mixtures have been noticed and measured since the late 1990s. Since then, numerous research studies conducted on the phenomena found inconclusive conclusions regarding the effects of TD on the initial pavement quality and the long-term performance. The objective of this study was to evaluate the effects of different levels of TD on the initial quality and the long-term performance of asphalt pavements by evaluating the core density and laboratory measured performance characteristics, respectively. Through the evaluation, it was also aimed to ascertain and establish allowable TD …

Go to article

Development Of Microfluidic Devices To Study Algal Chemotaxis And Long-Term Growth Dynamics, Benjamin Seth Roberts Jan 2016

Development Of Microfluidic Devices To Study Algal Chemotaxis And Long-Term Growth Dynamics, Benjamin Seth Roberts

LSU Master's Theses

Harmful algal blooms pose a threat to human health and the environment. Many complex factors influence their formation and development, and much is still unknown. One major influencing factor that is well-known yet poorly studied is algal chemotaxis. Many studies have examined chemotaxis in other organisms, but very little about chemotaxis in algae has been studied, largely because existing technology and assay techniques are inadequate. Microfluidics offers many possibilities for cell biology, and has been applied to the study of chemotaxis in other organisms already. These techniques can be applied to the study of algal chemotaxis as well. We present …

Go to article

A Mixed Consensus And Fuzzy Approach To Position Control Of Four-Wheeled Vehicles, Bita Hasheminezhad Jan 2016

A Mixed Consensus And Fuzzy Approach To Position Control Of Four-Wheeled Vehicles, Bita Hasheminezhad

LSU Master's Theses

Autonomous driving is a growing domain of intelligent transportation systems that utilizes communications to autonomously control cooperative vehicles. This thesis presents a multi-agent solution to the platoon control problem. First, an adaptive controller on linearized longitudinal dynamics of a vehicle is applied to assure vehicles are able to track their reference velocities. Then, an agent-based consensus approach is studied which enables multiple vehicles driving together where each vehicle can follow its predecessor at a close distance, safely. To deal with unexpected events, a fuzzy controller is added to the reference signal of the consensus controller. Simulation results are provided to …

Go to article

Hydrodynamic Simulations Of The Prototype Mississippi River And Expanded Small-Scale Physical Model To Investigate Impact Of Sea Level Rise, Linsey Brooke Olivier Jan 2016

Hydrodynamic Simulations Of The Prototype Mississippi River And Expanded Small-Scale Physical Model To Investigate Impact Of Sea Level Rise, Linsey Brooke Olivier

LSU Master's Theses

The Expanded Small-Scale Physical Model (ESSPM) is a distorted-scale, moveable bed model that will complement numerical and field studies studying management strategies in the lower ~140 miles of the Mississippi River and their effect on flooding, navigation and coastal restoration. It is recognized that relative sea level rise (RSLR), the combination of eustatic sea level rise (ESLR) and subsidence, will have an impact on the hydraulics and sediment transport in the lower River. However, it is physically impossible to replicate subsidence in the ESSPM; thus, future RSLR conditions will be experimentally simulated by raising Gulf of Mexico (GoM) levels commensurate …

Go to article

Characterization Of Thermoplastic Fusion Bonding Of Microchannels Using Pressure Assisted Boiling Point Control System, Kavya Dathathreya Jan 2016

Characterization Of Thermoplastic Fusion Bonding Of Microchannels Using Pressure Assisted Boiling Point Control System, Kavya Dathathreya

LSU Master's Theses

An innovative method of thermoplastic fusion bonding using a pressure assisted boiling point control (PABP) system was characterized to determine the optimum parameters for bonding polymethyl methacrylate (PMMA) components containing microchannels and thin, 250 µm cover sheets. The PABP system enables precise control of the temperature boundary condition and the applied pressure by immersing the components being bonded in boiling water and varying the vapor pressure. Test structure geometries containing microchannels of two depths and four different aspect ratios were designed: 1:10 (Depth: 10µm, Width: 100 µm and Depth: 5µm, Width: 50 µm), 1:50 (Depth: 10µm, Width: 500µm and Depth: …

Go to article

New Archiving, Fingering, And Assessing Techniques For Sheet Music Using Advanced Signal Processing Approaches, Ting-Chen Hsu Jan 2016

New Archiving, Fingering, And Assessing Techniques For Sheet Music Using Advanced Signal Processing Approaches, Ting-Chen Hsu

LSU Master's Theses

In this thesis, advanced signal processing techniques are proposed to archive the musical scores, guide the novice pianists to play piano with appropriate fingerings, and assess the harmonization for musical composition. The mathematical frameworks for these three applications are established and the corresponding optimization problems are formulated. The optimal solutions are also provided. First, the hard- and soft-archiving approaches for storing and distributing musical scores are investigated. By use of the popular musical scripting language, LilyPond, as the intermediate data format, we propose to encode the LilyPond script, which is converted from the original musical score, to the two-dimensional quick-response …

Go to article

3-D Printed Conveyor For Continuous-Mode Cryopreservation Of Individual Samples, Melissa Kaye Eskridge Jan 2016

3-D Printed Conveyor For Continuous-Mode Cryopreservation Of Individual Samples, Melissa Kaye Eskridge

LSU Master's Theses

Lack of standardization of terminology and protocols, combined with limited access to freezing equipment due to cost constraints and lack of portability, has created a need for inexpensive cryopreservation devices. Distribution of standardized methods of freezing cells would enable the development and adoption of standards on materials and protocols. Some cryopreservation methods are limited by the amount of cells available and the toxicity of certain cryopreservation agents. These studies would benefit from the ability to cool individual samples. All commercially available and proposed cooling devices operate by cooling batches of samples at the same time. The cryopreservation conveyor was designed …

Go to article

Spatial Biodegradation Of Mc252 Crude Oil On A Coastal Headland Beach, Zachary Joseph Romaine Jan 2016

Spatial Biodegradation Of Mc252 Crude Oil On A Coastal Headland Beach, Zachary Joseph Romaine

LSU Master's Theses

Following the Deepwater Horizon oil spill in April, 2010, hard structures were constructed to deter oil migration into sensitive marsh areas behind Fourchon Beach, LA These hard structures created conditions for accumulation and burial of oil across an 8 foot deep beach vertical profile. Buried oil persists in these areas due to anaerobic conditions of beach groundwater. The objectives of this thesis are to compare the rate and extent of biodegradation of 3-ring PAHs in crude oil deposits from the surface and subsurface, and to investigate effects on beach groundwater after introduction of O2. Field samples were removed from 2011-2016 …

Go to article

Weld Quality Classification From Sensory Signatures In Friction-Stir-Welding (Fsw) Using Discrete Wavelet Transform And Advanced Metaheuristic Techniques, James Devecmon Roberts Jan 2016

Weld Quality Classification From Sensory Signatures In Friction-Stir-Welding (Fsw) Using Discrete Wavelet Transform And Advanced Metaheuristic Techniques, James Devecmon Roberts

LSU Master's Theses

Controlling the quality of welds is an essential part of high quality fabrications and ensuring structural integrity of welded joints and welded structures. Industry is in an endless pursuit to find more cost effective methods of testing welds for defects and eliminating them entirely. This Study contributes to this goal by investigating a new system with the ability to monitor welding conditions during the forging process. Monitoring the condition of the weld, while the metals are joined together is faster and more cost- effective than conventional methods of post-weld defect detection. In this study, the feedback signals are first collected …

Go to article

A Comparison Between Functional And Traditional Interface Displays In Support Of Console Operator Performance And Workload, Sophie Lynn Schwartz Jan 2016

A Comparison Between Functional And Traditional Interface Displays In Support Of Console Operator Performance And Workload, Sophie Lynn Schwartz

LSU Master's Theses

In the petrochemical industry, schematic interfaces have been traditionally used as the main interface for console operators to monitor activities. There is limited research in this industry investigating alternative interface types to better support console operator’s decisions during alarm management. Furthermore, even less of that research includes eye-tracking as a measure for console operator situation awareness (SA). This research aimed to investigate an alternative interface, called a functional interface, in its level of support of console operator situation awareness, accuracy, subjective workload, and average response time. Additionally, eye-tracking was incorporated to explore its value as measure for situation awareness on …

Go to article

Driver Engagement In Secondary Tasks: Behavioral Analysis And Crash Risk Assessment, Mengqiu Ye Jan 2016

Driver Engagement In Secondary Tasks: Behavioral Analysis And Crash Risk Assessment, Mengqiu Ye

LSU Master's Theses

Distracted driving has long been acknowledged as one of the leading causes of death or injury in roadway crashes. The focus of past research has been mainly on the change in driving performance due to distracted driving. However, only a few studies attempted to predict the type of distraction based on driving performance measures. In addition, past studies have proven that driving performance is influenced by the drivers’ socioeconomic characteristics, while not many studies have attempted to quantify that influence. In essence, this study utilizes the rich SHRP 2 Naturalistic Driving Study (NDS) database to (a) develop a model for …

Go to article

Integration Of Naturalistic Driving Characteristics Into Crash Forecasting Models, Nicholas Hart Jan 2016

Integration Of Naturalistic Driving Characteristics Into Crash Forecasting Models, Nicholas Hart

LSU Master's Theses

While highway safety has steadily improved throughout the United States, highway crashes and the resulting losses continue to be a significant concern in Louisiana. Louisiana consistently lags behind the country in many key areas of highway safety. To improve the conditions of roads in Louisiana, the Louisiana Department of Transportation and Development (LADOTD) has begun to implement the Highway Safety Manual (HSM) to evaluate existing and expected safety conditions and how to allocate limited improvement funds. However, as the HSM was developed using aggregated national statistics, it is not always able to reflect the conditions present on specific Louisiana roadways. …

Go to article

Aerodynamic Mitigation Of Roof Suction Using Solar Panels, Laura M. Iverson Jan 2016

Aerodynamic Mitigation Of Roof Suction Using Solar Panels, Laura M. Iverson

LSU Master's Theses

This thesis aims to evaluate the feasibility of solar panels to be used as aerodynamic mitigation devices to reduce roof suction caused by high-speed winds on flat-roof, low-rise buildings. Roof suction is caused by negative pressures resulting in uplift on the roof, due to the wind passing over the sharp edges of the roof. Suction is a common cause of failure for these types of flat-roof, low-rise buildings during extreme wind events such as hurricanes, as the uplift force can cause the roof to separate from the building. A variety of mitigation devices have been proposed in the literature to …

Go to article

First Prev Next Last