Engineering Commons^™

Numerical Calculation Of Spatially Variant Anisotropic Metamaterial, Asad Ullah Hil Gulib

Open Access Theses & Dissertations

3D printing, or additive manufacturing, is rapidly evolving into a mainstream manufacturing technology that is creating new opportunities for electromagnetics and circuits. 3D printing permits circuits to fully utilize the third dimension allowing more functions in the same amount of space and allows the devices to have arbitrary form factors. 3D printing is letting us discover new physics that is not possible in standard 2D circuits and devices. However, evolving electromagnetics and circuits into three dimensions introduces some serious problems like thermal management, interference, and mutual coupling between the components which degrades performance and hurts signal integrity.

Metamaterials are engineered …

The Viability Of High-Frequency Oscillation Analysis In Eeg Signals For Seizure Prediction, Bryan David Kern

Open Access Theses & Dissertations

Seizure prediction is a decades-old research problem that has yet to reach any satisfying conclusions. Many studies have tackled the problem with varying results, but there has yet to be any major breakthroughs that define the direction of all future research. However, a promising, new predictor may have presented itself in recent years in the form of high frequency oscillations (HFOs). With the discovery of HFOs (80 - 800 Hz) as a biomarker for epilepsy, new interest has been placed in studying the high frequency content of EEGs to find a possible link between epilepsy and HFOs. In this paper, …

Modeling And Characterization Of Piezoelectric Based Multifunctional Structures, Ricardo Martinez Hernandez

Open Access Theses & Dissertations

Continuous monitoring of high pressure and high temperature in energy system applications has been a developing research area in today’s energy sector. Multifunctional materials have the potential to provide real-time monitoring of structures where temperature and pressure sensing is critical to its performance and efficiency. In this study, multifunctional materials are studied by embedding piezoelectric materials with two ongoing technologies, woven fabric composites and additive manufacturing (AM). The AM technology allows the flexibility of embedding a sensor within the structure, all while not compromising the mechanical performance requirements. The “smart parts” are fabricated modifying the standard additive manufacturing process, using …

Wettability Of Magnesium Based Alloys, Victor Manuel Ornelas

Open Access Theses & Dissertations

The premise of this project was to determine the wettability behavior of Mg-based alloys using three different liquids. Contact angle measurements were carried out along with utilizing the Zisman method for obtaining values for the critical surface tension. Adhesion energy values were also found through the use of the Young-Dupre equation. This project utilized the Mg-based alloy Mg-2Zn-2Gd with supplemented α-Minimum Essential Medium (MEM), Phosphate Buffer Saline solution (PBS), and distilled water. These three liquids are commonly used in cell cultivation and protein adsorption studies. Supplemented α-MEM consisted of α-MEM, fetal bovine serum, and penicillin-streptomycin. Mg-2Zn-2Gd was used because of …

Application Of Secondary Analyses On Industrial Data Sets, Luis G. Perez

Open Access Theses & Dissertations

Secondary analysis on quantitative data sets is the in-depth analysis of relationships, trends, patterns or behaviors that are not obvious from a superficial examination of data but that can be very germane in the application of that data. The present work presents a framework for investigators to use in applying secondary analysis on big data that correlates to the research topic. The framework can facilitate the illumination of possible data behaviors or patterns that could be useful in arriving at an answer to a question. Behavior of monitored equipment (analyzers, meters, etc.) can easily be depicted and can be used …

Microstructural Characterization Of High Velocity Oxy Fuel Coatings Of Inconel 718 And Iron Aluminides, Ana Cecilia Rios Ibanez

Open Access Theses & Dissertations

Thermal spray guns are used today to deposit metallic powders as homogeneous and durable coatings with low porosity onto metals. The objective is to improve their wear resistance and their corrosion resistance in order to withstand conditions such as abrasion and erosion. This can improve the life of turbines, generators and such devices in environments found in ultra-supercritical coal-fired (AUSC) boilers, steam turbines and gas turbines (Mohammed & Cabrera, 2014). Industries like manufacturing, automobile and especially in the sustainable energy area, have used this technique to improve component characteristics, extend product life, increase performance as well as reduce production and …

Removal Of Iron, Zinc, And Copper From Waters Impacted By Acid Mine Drainage Using Natural Zeolite, Mackayla Janae Thyfault

Open Access Theses & Dissertations

In this research, the adsorption behavior of zeolites with respect to iron (Fe), zinc (Zn), and copper (Cu) has been studied in order to assess its application to heavy metal removal in polluted settings caused by acid mine drainage (AMD). The St. Cloud zeolitic deposit used in this project was characterized using a sieve analysis; the effective diameter and coefficient of uniformity were calculated. Batch studies were performed, and the samples were analyzed using ICP-OES. Batch studies used metal concentrations ranging from 50 mg/L to 650 mg/L. Freundlich, Linear, Langmuir, and BET adsorption isotherms were applied and evaluated to the …

Design Of A 500 Lbf Liquid Oxygen And Liquid Methane Rocket Engine For Suborbital Flight, Jesus Eduardo Trillo

Open Access Theses & Dissertations

Liquid methane (LCH4)is the most promising rocket fuel for our journey to Mars and other space entities. Compared to liquid hydrogen, the most common cryogenic fuel used today, methane is denser and can be stored at a more manageable temperature; leading to more affordable tanks and a lighter system. The most important advantage is it can be produced from local sources using in-situ resource utilization (ISRU) technology. This will allow the production of the fuel needed to come back to earth on the surface of Mars, or the space entity being explored,making the overall mission more cost effective by enabling …

Molecular Dynamics Proxy Applications For Optimizing Performance Of Simulations Under Extreme Conditions, Jayalath Abeywardhana Mudiyanselage Madawa Abeywardhana

Open Access Theses & Dissertations

Exascale performance of scientific application is a prominent goal for the scientific community and computer hardware vendors. As a result, several proxy applications for the widely used scientific codes have been developed with the purpose of testing performance, memory and power consumption issues associated with simulations at the exascale. Co-MD is a proxy application for classical Molecular Dynamics (MD) codes based on the (SPaSM) Los Alamos code.

This work comprises two different but related computational aspects: performance evaluation and optimization of Co-MD (Co-Design Molecular Dynamics) for different computer architectures/execution models, and direct application of SPaSM (Scalable Parallel Short-range Molecular Dynamics) …

Dielectric Prism Antenna, Jose Antonio Avila

Open Access Theses & Dissertations

3D printing is revolutionizing the development and manufacturing of devices. Currently multi-material 3D printing, like metals plus dielectrics, is in the early stages and not very accessible. This work set out to develop an all-dielectric antenna that could be 3D printed with current widely accessible 3D printing technologies. The antenna developed is an all-dielectric ultra-thin antenna with a simple geometry. The antenna radiates by using total internal reflection and a circulating mode operating as a leaky whispering gallery mode. We are calling the antenna the dielectric prism antenna because it acts like an optical prism. The dielectric prism antenna was …

Effects Of Citric Acid Coated And Uncoated Cerium Oxide Nanoparticles In Tomato (Solanum Lycopersicum) Plants, Ana Cecilia Barrios

Open Access Theses & Dissertations

This research was performed to examine the physiological and biochemical effects of bare (nCeO2) and citric acid coated (nCeO2+CA) cerium oxide nanoparticles in tomato (Solanum lycopersicum). Plants were germinated and grown to full maturity in soil amended with 0-500 mg/kg and periodically analyzed using ICP-OES/MS and other spectroscopic and biochemical techniques. Although Ce in tissues increased as the external nCeO2 increased, there were no visible signs of toxicity. In mature plants, nCeO2 induced developmental changes and altered nutritional quality (essential elements) in fruits. On the other hand, nCeO2+CA affected fruit carbohydrate composition (sugars and starch). This study gives insights on …

High Fidelity Localization And Sensing For Cattle Analytics, Luis Carlos Bañuelos Chacon

Open Access Theses & Dissertations

Global beef production is projected to reach approximately 60 million tons in 2015 and opportunities to increase efficiencies are significant with recent advancements in remote sensing. By economically monitoring the location and conditions of a herd such as feeding patterns, body temperature, heart rate, and other biometric information, the herd performance can now be enhanced through data-driven optimization. Next generation sensors provide high fidelity data on a wide range of measurable properties, and simultaneously, the wide adoption of these sensor systems in many consumer applications is leading to commoditization and reduced cost due to the associated economies of scale. Deploying …

Through-Thickness Reinforcement For Woven Laminates, Alejandra G. Castellanos

Open Access Theses & Dissertations

Fiber reinforced polymer composites have gained popularity in aerospace and naval applications due to their tailorable mechanical properties and high strength-to-weight. Despite these advantages, between the layers of fabric (laminas), there is a resin-rich region known as interlaminar region, with no reinforcement which is very susceptible to damage. Different types of reinforcements have been tested for the interlaminar region. However, all of these methods have proved to decrease the in-plane properties due to damage to the fibers. In this Thesis, a new reinforcement technique with ZnO nanowires is proposed to increase the damage resistance. This Thesis describes the design, manufacturing …

Manufacturing And Characterization Of Energetic Materials, Carlos Alberto Catzin

Open Access Theses & Dissertations

Few products take several years of research effort to be synthesize yet disintegrate in scarcely millionths of a second when used. Despite their short lifespan energetic materials, particularly high explosives, are in demand as never before by the Aerospace, Defense, Energy, Gas, Mining, and Oil Industry for their unique properties. One class of high explosives known as polymer bonded explosives (PBXs) are popularly used in a wide variety of applications ranging from solid rocket propellants to the main explosive charge in conventional ammunitions. A key characteristic behind the popularity of PBXs in comparison to other high explosives is their handling …

Blind Image Deconvolution Based On Sparsity: Theoretical Justification And Improvement Of State-Of-The-Art Techniques, Fernando Cervantes

Open Access Theses & Dissertations

Observed signals and images are distorted by noise and blurring. In precise terms, blurring is a convolution of the original image with some blurring function. From this viewpoint, to reconstruct the original image, we need to reverse the effects of this convolution, i.e., to ``deconvolve'' the image. Many efficient methods for image deconvolution are known. However, most of these methods assume that we know the blurring function -- or at least that we have some partial information about the blurring function. In some practical situations, however, we do not have this information. In such situations, we need to perform, blind …

Minimizing Environmental Impacts For Hub And Spoke Distribution Network Problems Through The Use Of Multi-Objective Evolutionary Algorithms, Ileana Delgado

Open Access Theses & Dissertations

While transportation is crucial to our economy and our personal lives, as a sector it is also a significant source of greenhouse gas (GHG) emissions. The AASHTO report states, "America's transportation system has served us well, but now faces the challenges of congestion, energy supply, environmental impacts, climate change, and threatens the economic, social, and environmental future of the nation". With respect to the environment, transportation is the most visible aspect of supply chains. Transportation emissions can be reduced by implementing approaches that contribute to GHG emissions reduction, for example, the use of low-carbon fuels, new and improved vehicle technologies, …

Combustion Of Novel Thermite Mixtures For Iodine Generation, Sergio Emanuel Guerrero

Open Access Theses & Dissertations

Halogen-containing reactive materials could be used for mitigating the spread of hazardous, active biological microorganisms aerosolized as a result of explosion. The present work exhibits experimental results on the combustion of mechanically alloyed aluminum-iodine (Al-I2) powder mixed with Fe2O3, CuO, MoO3, Bi2O3, and I2O5. Wet mixing was used to prepare the samples, which were then compacted into pellets and ignited with a CO2 laser. A chamber was designed and built to accommodate for combustion and collection of products, and the available laser ignition setup was modified to enable combustion experiments with rapidly burning gas-generating mixtures. High-speed video recording was used …

A Novel Approach To Control Corrosion Behaviour On Bio Materials Using Taguchi Method (Design Of Experiments), Sai Dhiresh Kilari

Open Access Theses & Dissertations

In the present work, the Taguchi method, from the design of experiment (DOE) has been used to optimize the dip testing method to test the corrosion resistance of bio degradable materials such as PLA (Polylactic acid)and PCL (Polycaprolactone). A L9 (9) orthogonal array of Taguchi design was used, which involves nine experiments for three parameters (pH, sample, temperature) with three levels was used. Corrosion resistance in various pH change of HCL solution was evaluated by dip tests at various temperatures. Analysis of variance (ANOVA) is performed on the obtained measured data and S/N (signal to noise) ratios. The lower the …

Commercialization Of Cobalt Promoted Molybdenum Disulfide Hydrodesulfurization Unsupported Catalyst, Juan Hilario Leal

Open Access Theses & Dissertations

Catalysis is a key player in the petroleum refining process. Our focus is primarily on the improvement of a commercial HDS (HydroDeSulfurization) hydrotreating catalyst. The commercial catalyst sold today is cobalt promoted molybdenum supported on γ-alumina. Our aim is to work with Porocel Industries LLC to produce an unsupported, cobalt promoted, molybdenum disulfide catalyst by improving on previous work conducted by Dr. Brenda Torres. The catalysts (B3&B5) developed by Dr. Torres were reported to be highly active on real feedstocks and were produced via hydrothermal process. Oxidic Mo, and H2S were used to make an ammonium tetrathiomolybdate precursor that was …

Analysis Of Road Vehicle Aerodynamics With Computational Fluid Dynamics, Christian Armando Mata

Open Access Theses & Dissertations

A road vehicles aerodynamics can be one of the most influential aspects of its performance. With the increased importance on fuel efficiency in recent years, new road vehicles are being developed smaller in size, with smaller displacement engines, as well as with improved aerodynamics. The aerodynamics of a vehicle can have a significant effect on its fuel efficiency, as well as other important aspects of the vehicles performance such as the top speed, acceleration, and handling. A study focusing on analyzing aerodynamic effects due to vehicle geometries such as wheels covered by the vehicles body in comparison to open wheels …

Design Structure Method As Applied To The Structural Organization Of A 5th Genertation Fighter Jet, Israel Michel Michel

Open Access Theses & Dissertations

In current times, the demand for protection against enemies in a volatile geopolitical climate is an increasingly demanding concern. Many countries invest billions of dollars attempting to protect their borders and in fact strive to become the most powerful and dominant war power in the world. As the dollar amount of each country increases, and while other countries seem to always beat each other, the path for innovations and demand is never ending. The complexity of each project continues to grow as they become very sophisticated in their respective field.

In recent decades, itâ??s been proven that whoever reaches the …

Enhancing Surface Finish Of Fused Deposition Modeling Parts Through Targeted Chemicals And Design Of Experiments, Saurabh Nayyar Nayyar

Open Access Theses & Dissertations

Fused Deposition Modeling (FDM) is one of the most popular rapid prototyping (RP) technologies due to its low operational cost, high fabrication speed, and range of applications served. However, FDM fabricated parts generally have poor surface finish quality which have limited their utilization in end-use applications. To enhance surface quality of FDM materials, several researchers have regulated key process parameters using the FDM material, Acrylonitrile Butadiene Styrene (ABS), with varying results. The main goal of this research is to investigate the effects of a post-fabrication chemical treatment process on the surface roughness for FDM parts of the FDM material ULTEM. …

Combining Interval And Probabilistic Uncertainty In Engineering Applications, Andrew Martin Pownuk

Open Access Theses & Dissertations

In many practical application, we process measurement results and expert estimates. Measurements and expert estimates are never absolutely accurate, their result are slightly different from the actual (unknown) values of the corresponding quantities. It is therefore desirable to analyze how this measurement and estimation inaccuracy affects the results of data processing. There exist numerous methods for estimating the accuracy of the results of data processing under different models of measurement and estimation inaccuracies: probabilistic, interval, and fuzzy. To be useful in engineering applications, these methods should provide accurate estimate for the resulting uncertainty, should not take too much computation time, …

National Evaluation For Development And Exploration Potential Of Mineral Commodities In Produced Waters, Stephanie Ray

Open Access Theses & Dissertations

The U.S. Geological Survey recently updated a geochemical database consisting of data for approximately 160,000 produced waters samples, primarily from petroleum and geothermal reservoirs. Using major and trace elements from conventional and unconventional well types from the database, this Thesis provides a comprehensive, national evaluation for mineral commodity potential in produced waters. Produced waters contain virtually every naturally occurring element and can range in salinity to several times that of seawater. Despite the typical outlook to view produced waters as a waste, they have potential for natural resource development.

This Thesis provides, for each mineral commodity found in the produced …

Modeling Of Piezoelectric Traveling Wave Rotary Ultrasonic Motors With The Finite Volume Method, Ivan Arturo Renteria Marquez

Open Access Theses & Dissertations

In 1983 Toshiiku Sashida developed a new motor concept called Piezoelectric Traveling Wave Rotary Ultrasonic Motor (PTRUSM). The advantages of these motors include high torque at low speed, absence of a generated magnetic field, and high potential for miniaturization. Unfortunately PTRUSMs have some disadvantages that limit the areas of applications for these types of motors. The disadvantages are a short operating life (about 1000 hours), small output power, and the need of a complex motor controller.

On one hand, these motors have been used in satellites, mobile phones, photocopiers, robotic arms, telescopes, automobiles, and camera autofocusing. On the other hand, …

Improving The Engineering Properties Of Pla For 3d Printing And Beyond, Carmen R. Rocha

Open Access Theses & Dissertations

Additive manufacturing (AM), now more commonly known as 3D printing, has been classified as efficient, fast, and practical in the prototyping sector of product development. In the work presented here, we will use one of the AM techniques known as Material extrusion 3D printing (ME3DP), which has all the advantages of AM. However, one of the biggest challenges facing ME3DP technologies is the limitation of the range of materials used by this technique. Acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) are currently the most common thermoplastics materials used in ME3DP because of their ability to melt and be reprocessed. …

Intrinsic And Metal-Doped Gallium Oxide Based High-Temperature Oxygen Sensors For Combustion Processes, Ernesto Javier Rubio

Open Access Theses & Dissertations

Currently, there is enormous interest in research, development and optimization of the combustion processes for energy harvesting. Recent statistical and economic analyses estimated that by improving the coal-based firing/combustion processes in the power plants, savings up to ~$450-500 million yearly can be achieved. Advanced sensors and controls capable of withstanding extreme environments such as high temperatures, highly corrosive atmospheres, and high pressures are critical to such efficiency enhancement and cost savings. For instance, optimization of the combustion processes in power generation systems can be achieved by sensing, monitoring and control of oxygen, which is a measure of the completeness of …

Ontology-Driven Integration Of Data For Freight Performance Measures, Eduardo J. Torres

Open Access Theses & Dissertations

Transportation performance measures are defined as quantitative and qualitative indicators that rely on data or information to explain mobility, congestion, safety, environmental and other factors. Though performance measures have been used for freeways and other highways, not many have been specified and applied to the freight transportation system. Recently, freight performance measures have been recommended by Federal Highway Administration to quantify the operating efficiency of the freight transportation system on existing infrastructures. This research seeks to expand this concept and to develop a comprehensive freight performance measurement framework. The expanded framework recommended in this Thesis consists of four criteria: safety, …

Quantitative Assessment Of Secondary Flows Of Single-Phase Fluid Through Pipe Bends, Z. Kaldy, O. Ayala

Engineering Technology Faculty Publications

Single-phase fluid flow was simulated passing through various three dimensional pipe elbows. The simulations varied by Reynolds number, curvature ratios, and sweep angles and were all conducted using the k-e model available in COMSOL Multiphysics 5.1. The intent of this research was to qualitatively assess the flow characteristics under several different conditions. Many similarities were seen especially when comparing curvature ratios, the vorticity location for the turbulent cases show near identical behavior at the elbow midsection. One of the variables quantified in this paper is the maximum secondary velocity module which shows increasing values until the midsection of the elbow.

Microstructural Investigation Of Vintage Pipeline Steels Highly Susceptible To Stress Corrosion Cracking, Monica Adriana Torres

Open Access Theses & Dissertations

The use of pipelines for the transmission of gas offers not only efficiency, but a number of economic advantages. Nevertheless, pipelines are subject to aggressive operating conditions and environments which can lead to in-service degradation [1] and thus to failures. These failures can have catastrophic consequences, such as environmental damage and loss of life [2]. One of the most dangerous threats to pipeline integrity is stress corrosion cracking (SCC). Despite the substantial progress that has been achieved in the field, due to the complex nature of this phenomenon there is still not a complete understanding of this form of external …